Sony BVM-8045QD, BVM-9045D Service Manual

Broadcast Color Monitor

BVM- 8045QD/9045D

To support the rapidly expanding digital production environment, Sony has introduced

the BVM-8045QD/9045D Color Monitor. In addition to the outstanding picture quality

and reliability inherent in the BVM line of monitors, this new monitor features

a built-in component serial digital interface with 10-bit digital to analog conversion

so that it can accept 270Mb/s bit rate signals without any additional equipment.

A variety of convenient operating features such as the selectable aspect ratio of

4:3 and 16:9 is also available. With its AC/DC operation and excellent

performance and features, the Sony BVM-8045QD/9045D is a valuable tool

for many digital production applications, both in the studio and field.

Features

MK7200V2IW99FEB

Distributed by

Reproduction in whole or in part without written permission is prohibited.

Features and specifications are subject to change without notice.

All non-metric weights and measures are approximate.

Sony and Trinitron are trademarks of Sony Corporation.

Battery Adaptor

DC-L10

Features

• Attaches a rechargeable Lithium-Ion Battery Pack BP-L60A or BP-L90A to a BVM-8045QD/9045D with this adaptor.

• Retractable handle

• Easily detachable upper part of adaptor bracket

Specifications

• Operating time*

BP-L60A Approx. 100 min. (typical) BP-L90A Approx. 160 min. (typical)

* Actual operating times may vary.

• Dimensions: 315(W) ×146 (H) ×100 (D) mm(12 1/2 ×5 3/4×4 inches)

• Mass: 2.35 kg (5 lb 19 oz)

• DC output: DC 12 V, Right angle XLR 4-pin connector (female)

• DC fuse: 5 A

Specifications

CRT performance

CRT 22 cm (9-inch) HR Trinitron,

viewable area 19.1 cm (8-inch)

measured diagonally, 70˚ deflection AG pitch 0.25 mm Resolution 450 TV lines

Video signal

Frequency response 6.0 MHz -3.0 dB (at video out) Color system NTSC, PAL, SECAM, NTSC4.43 Synchronization AFC time constant 1.0 msec

Picture performance

Color temperature D65 Normal scan 6% Underscan 3% Linearity Within 2% of the picture height Convergence Center: less than 0.43 mm (typical)

Peripheral: less than 0.53 mm (typical) Raster size stability H: 1.0%, V: 1.5% High voltage regulation 3.0%

Inputs

VIDEO*

Loop-through BNC, 1 Vp-p ±6 dB sync negative

Y/C*

Loop-through mini DIN 4-pin, Y: 1 Vp-p ±6 dB sync negative

C(NTSC):0.286 Vp-p ±6 dB, C(PAL):0.3 Vp-p ±6 dB

COMPONENT Y: BNC, 1 Vp-p ±6 dB sync negative, 75 Ω

R-Y, B-Y: BNC, 0.7 Vp-p ±6 dB positive, 75 Ω RGB (Analog) G: BNC, 1 Vp-p ±6 dB sync on green, 75 Ω

R, B: BNC, 0.7 Vp-p ±6 dB positive, 75 Ω COMPONENT SDI Active loop-through BNC,

SMPTE259M/CCIR 656-III, 270Mbits/s EXT SYNC Loop-through BNC, 4 Vp-p ±6 dB negative REMOTE Mini DIN 8-pin

Outputs

VIDEO BNC, automatic 75 Ω termination*

Y/C Mini DIN 4-pin, automatic 75 Ω termination*

COMPONENT SDI BNC, active loop-through output EXT SYNC BNC, automatic 75 Ω termination*

General

Power consumption BVM-8045QD: AC: 48 W, DC: 44 W

BVM-9045D: AC: 45 W, DC: 42 W

Power requirements AC: 100 to 240V AC, 50/60Hz

DC: 12V DC, XLR 4-pin (male) Operating temperature 0 to 35˚ C (32 to 95˚ F) Storage temperature -10 to 40˚ C (14 to 104˚ F) Humidity 0 to 90 % (no condensation) Pressure 700 to 1060 hPa Dimensions (W/H/D) 217 x 217 x 352.5 mm (8 5/8× 8 5/8×14 inches) Mass 8.5 kg (18 lb 1 oz)

Regulation compliance

BVM-8045QD: UL 6500, c-UL (CAN/CSA-E65-94), FCC Class A, IC Class A,

DHHS, DNHW BVM-9045D: EN 60 950 (TÜV), CE (EMC, LVD)

0 dBu = 0.775 V rms *

The Y/C input has priority over the Composite input.

75 Ω termination is automatically set to OFF when a connection is made to the OUT connector.

• Component serial digital interface terminal

• Aspect ratio is switchable (4:3 and 16:9) with the16:9 button on the front panel

• High resolution CRT provides 450 TV lines at center (composite video)

• Stable color temperature from beam current feedback circuit

• Analog component (Y/R-Y/B-Y or RGB), Y/C and composite video inputs

• Analog component level selectable between BETA and SMPTE/N10 by a rear panel slide switch

• NTSC comb filter

• Accepts external sync/sync on Green

• Tally input

• Color Temperature D65

• Blue only, H/V delay, Underscan capability

• AC/DC operation

• Front panel degauss button

• EIA standard rack mountable with a second BVM-8045QD/9045D (or an optional blank panel MB-509) by using optional an MB-507 rack mounting bracket

• Wired remote control capability

Sony Corporation

Printed in Japan

Front panel

Rear panel