Sony A3880043 User Manual

8VHUJXLGH
;SHULD;
Important information
Please read the Important information leaflet before you use your mobile phone.
Experience more. Discover how.
Fill it with pop and let it rock. Share your life in pictures. Or why not go online for the latest updates? Your new phone is the key to a wider world. And it's just around the corner. Get started with this User guide. And join us online to get the full picture. Music, games, apps, updates, downloads, support and more. All in one place:
www.sonyericsson.com/X2
Don't forget to update your phone software. See
Update Service on page 33.
User guide in the phone
An extended User guide and a help function are available in your phone.
To access the Xperia™ X2 phone User guide
Select > Help > X2 Help.
To use the help function in the phone
Tap > Help.
2
Getting started
To insert the SIM card
1
Remove the battery cover.
2
Slide the SIM card into its holder with the gold-colored contacts facing down.
3
To insert the battery
Insert the battery with the Sony Ericsson hologram side up and the connectors facing each other.
To insert a memory card
1
Remove the battery cover.
2
Insert the memory card with the gold-colored contacts facing down.
4
To turn on the phone
1
Press and hold down the power key until the phone starts.
2
At first startup, a Quick Start wizard guides you through the initial settings.
Aligning the screen
The first time you turn on the phone, you need to align the screen. You can also re-align your screen, if necessary.
You need to use the stylus to align the screen.
To align the screen
1
Tap > Settings > System > Screen > Align Screen.
2
Use the stylus and tap each target firmly and accurately.
To turn on sleep mode
To turn off the screen temporarily and switch the phone to sleep mode, press the power key.
5
To turn off sleep mode
To activate the screen, briefly press the power key. The phone is also activated when you slide open the phone, or when you receive a call or a message.
Screen lock
To lock the screen
Press and hold .
To unlock the screen
Slide to the left or right on the screen.
Charging the battery
The phone battery is partly charged when you buy it.
6
To charge the phone using the power adapter
Connect the phone to a power outlet using the USB cable provided and the power adapter.
To charge the phone using a computer
Connect the phone to a USB port on a computer using the included USB cable provided.
7
To type a single upper-case letter, press and then press the relevant letter key.
To use all upper-case letters, press twice. To change back to all lower-case letters, press twice again.
To type accented characters, press the letter key first, and then press until the required character appears.
To enter a number or a symbol (in blue or red on the upper right corner of some keys), press and then press the relevant key.
To use all number or symbol keys, press twice and enter the relevant numbers or symbols.
To verify entries or exit the program in use, press .
Using the on-screen keyboard
You can use the on-screen keyboard to enter text. The on­screen keyboard uses a built-in dictionary.
To enter text using the on-screen keyboard
1
In a program, tap the text input icon at the bottom of the screen.
2
Tap , then tap Keyboard.
3
To enter text, tap the letters on the on-screen keyboard.
4
To select a suggestion, press the space key.
SlideView
Slideview provides you with quick access to frequently used phone activities. It also gives you an overview of missed incoming activity, notifying you of any missed calls, emails, and text messages. Slideview includes access to:
Messaging
14
To enable key press simulation
1
Tap
> Settings > System > Optical joystick.
2
Mark or unmark the Enable key press simulation check box.
To enable mouse simulation
1
Tap > Settings >System > Optical joystick.
2
Mark or unmark the Enable mouse simulation check box.
Entering text
To enter text and characters, you can use:
The slideout keyboard.
The on-screen keyboard.
Handwriting recognition features such as Block Recognizer, Letter Recognizer or Transcriber.
Using the slideout keyboard
To type lower-case letters, press the relevant letter keys.
13
Using the arrow keys
To use the arrow keys
Press the arrow keys left, right, up or down to move around the screen. Press to select an item.
Using the optical joystick
You can move the highlighted marker in any direction by letting your finger glide over the navigation key. In Microsoft® Internet Explorer®, Messaging and Contacts, you can use the optical joystick to scroll instead.
12
Using the touch screen
To highlight or open an item, tap the item.
To copy, rename or send a file, tap and hold down the file or folder. Select the preferred action from the options dialog.
To scroll, tap the screen and slide up or down. On some pages you can also slide to the side.
To stop the screen from scrolling, tap the screen.
To pan a page, touch and hold on the screen, then drag your finger.
To pan continuously, drag your finger towards the outer limits of a page and hold. Release your finger to stop panning.
11
8 OK key
9 End call key 10 Touch screen 11 Ear speaker 12 Light sensor
14
15
16
17
18
19
20
13
13 3.5 mm headset/TV-out cable connector 14 Stylus 15 Camera light
9
Phone overview
1
2
4
5
3
6
7
8
9
10
11
12
1 Power key 2 Connector for charger/USB cable 3 Keyboard 4 Battery cover lock 5 Call key 6 SlideView key 7 Optical joystick/Selection key
8
16 Camera lens 17 Volume key 18 Loudspeaker 19 Camera key 20 Strap holder
Navigating
You can use the following means to navigate around the screen:
The stylus, or your finger, on the touch screen
The arrow keys on the keyboard
The optical joystick
10
Call history
Calendar
Media
Panel Manager
To navigate SlideView
1
2
1
To select or open an item in the list, tap the item.
2
To go back to the previous view, tap the downmost icon in the bar on the left hand side (item number 2 in the image).
3
To go back to the Media view, tap the in the bar on the left hand side (item number 1 in the image).
To open SlideView
Press .
15
Panels
The Panels interface lets you personalize your standby screen. You can view your chosen panels in different views, set panels to switch automatically, and download new panels.
Some panels described in this User guide are not supported by all networks and/or service providers in all areas.
To open and close panel views
1
Press .
2
Tap Panels.
You can double press to enter the panel view directly.
16
Switching between panels and applications
In a panel or an application, double press to go to Favorites view.
From a panel view, press to return to the most recently used panel.
In an application you started from the Start menu, press
to return to the most recently used panel.
Panel manager
With the panel manager you can display the panels in different views, edit settings for the auto panel switching and download new panels.
Favorites view List view Auto Panel switching Settings
Favorites view
Your nine favorite panels are displayed in this view. You can set panels as favorites from the List view.
To open a panel from the Favorites view
Tap the panel you want to open.
List view
Here you can set panels as favorites and read information about some of them. You can also filter the list of displayed panels.
17
To open a panel from List view
1
Drag the list such that the desired panel is highlighted.
2
Tap Activate.
To add a panel to your Favorites
1
From the List view, select a panel.
2
Tap Favorite.
To filter panels
1
From the List view, tap .
2
Select a filter.
Auto panel switching
Auto panel switching changes the current panel automatically at a selected time.
9:00
13:00
17:00
21:00
1
2
3
18
1 Timeline 2 Added panels in timeline 3 Available panel list
To change the time in the timeline
In Auto panel switching view, tap or .
To add panels to the timeline
Drag the panels you want from the available panel list to the timeline.
To remove panels from the timeline
Drag the panels you want to remove from the timeline to the available panel list.
19
Panel manager settings
1
2
3
1 Auto panel switching on/off - Turn Auto panel
switching on or off.
2 Release information/Update - Download the latest
version of the Panel manager application. If the current Panel manager application is the latest version the Update is disabled.
3 Get more panels - Download new panels for your
device.
20
Pixel City panel
You can access a number of features through the Pixel City panel. Many details and visual behaviours are connected to different features. You can discover the whole city by flicking to the sides.
1
2
8
9
3 4 5
6
10
1112
7
1 Messages and e-mails. 2 Calendar appointments. When there is a
calendar appointment coming up in the day, the train will appear.
3 Silent mode. The musicians play music at
the bandstand in the park when the phone is not in silent mode. The musicians disappear under the bandstand when silent mode is on.
21
4 Signal level. The number of flags indicates
the signal level.
5 The Bluetooth function. The fountain will
flow with water when the Bluetooth function is on. When the Bluetooth function is off, the fountain is still.
6 Battery level. The number of filled car park
levels indicates battery level status. 7 Sony Ericsson website. 8 Google Maps. 9 Google website. 10 Calls. A red airplane will fly in and stop on
the runway after you miss a phone call. 11 Wi-Fi on/off. The air control tower will emit
signal waves when Wi-Fi is on. 12 Time and date.
Downloading new panels
To download new panels
From the Panel settings view, tap Get more panels.
Calling
Making and receiving calls
You can use your phone to make, receive and keep track of calls and messages. You can also dial directly from
22
Contacts or from the Call History. To make or receive a phone call, your phone must be within range of a network.
Making calls
To make a call using the keypad
1
Press .
2
If the keypad is not visible, tap .
3
Enter the phone number, starting with the area code, by tapping the number keys.
4
Tap .
To end a call
To end an ongoing call, press
.
To make international calls
1
Press
.
2
Tap and hold down until the international call prefix
+ appears.
3
Enter the country/region code, area code (without the initial zero) and phone number.
4
Tap .
To make a call from Contacts
1
Press .
2
Tap .
3
Hide the keypad if necessary.
4
Scroll to the contact you want to call.
5
Tap the contact to see all of the contact's phone numbers.
6
Tap the number you want to call.
Receiving calls
To answer a call
Press .
23
Emergency calls
Your phone supports international emergency numbers, for example, 112 or 911. You can normally use these numbers to make emergency calls in any country, with or without the SIM card inserted, if you are within range of a network.
In some countries, other emergency numbers may also be promoted. Your network operator may therefore have saved additional local emergency numbers on the SIM card.
To make an emergency call
1
Press
.
2
To display the Phone keypad, if not already displayed, tap
.
3
Dial the local emergency number, or look it up on the SIM card, if available.
4
Tap .
Network settings
You can set how your phone should choose an available network when you are outside your operator coverage area.
To enter network settings
1
Press and tap Menu > Options.
2
Tap the Network tab and enter the settings.
E-mail
You can get e-mail in your phone and use all standard e­mail functions.
You can synchronise your e-mail using the Microsoft® Exchange ActiveSync® application.
24
Before using e-mail
Before you can send and receive e-mail, you need to set up at least one e-mail account in your phone. You can set up the following types of e-mail accounts:
Outlook e-mail that you can synchronize with a PC or your company Microsoft® Exchange Server
E-mail account provided by an ISP (Internet Service provider)
Web-based e-mail accounts
Work account that you access using a VPN (Virtual Private Network) connection
Before using e-mail, you need to have the correct Internet settings in the phone. See Connecting to the Internet on page 35.
To set up Microsoft® Outlook® e-mail through a Microsoft® Exchange Server
1
Tap > E-mail > Setup E-mail.
2
Enter your email address and password, select the Save password option, then tap Next.
3
Select Try to get the e-mail settings automatically from the Internet, then tap Next.
4
If automatic settings can not be found, select Exchange server in the Your e-mail provider list, then tap Next.
5
Tap Next again.
6
Mark the Attempt to detect Exchange Server Settings automatically check box, then tap Next.
7
If server settings are not detected, enter them manually, then tap Next.
8
Enter your user name, password and domain, then tap Next.
25
9
If prompted, enter the server address, then tap Next.
10
Select the data you want to synchronize, then tap Finish.
Some e-mail features depend on the Microsoft® Exchange Server version used in your company. Check with your network administrator for the availability of these features.
To manually set up an e-mail account of a common type
1
Tap
> E-mail > Setup E-mail.
2
Enter your e-mail address and password. Select the Save password option, then tap Next.
3
Check the Try to get the e-mail settings automatically from the Internet box, then tap Next.
4
If automatic settings can not be found, select an option in the Your e-mail provider: list, then tap Next.
5
Enter your name and account display name, then tap
Next.
6
If prompted, enter the incoming mail server address and the account type, then tap Next.
7
Enter your user name and password for the e-mail account, check the Save password box, then tap Next.
8
Tap Advanced Server Settings, select a Network connection, and tap Done to confirm.
9
Enter the outgoing mail server address, then tap Next.
10
Select a time interval for Automatic Send/Receive:.
11
Tap Finish.
Handling e-mail messages
To check for new e-mail
1
Tap
> E-mail.
2
Tap your e-mail account.
26
3
Tap Menu > Send/Receive.
Direct push
Direct push technology lets you receive new e-mail messages in your phone as soon as they arrive in your Inbox on the Microsoft® Exchange Server. This feature also works for items such as contacts, calendar appointments and tasks.
To turn on and off MS Direct push
1
Tap > Settings > Communication Manager.
2
Select an option for MS Direct Push.
Frequent updates can be costly and are operator­dependent.
SMS
You can send short text messages up to 160 characters long to other mobile phones using SMS (Short Message Service). Before you use SMS, you must have a service center number. The number is supplied by your service provider and is usually saved on the SIM card the first time you start your device with the SIM inserted. If not, you should contact your service provider.
To create and send a text message
1
Tap > Text.
2
Tap Menu > New > Text message.
3
Enter the phone number manually or tap To: to add a phone number from Contacts.
4
Tap the text area and enter the text.
5
Tap Send.
27
To view a message
1
When you receive a new text or multimedia message,
appears on the screen.
2
Tap > Text.
3
Tap a conversation list.
4
In the conversation list, tap the message.
MMS
In a message sent using MMS (Multimedia Messaging Service), you can include pictures, video, and audio clips.
Please note that MMS is a charged service and has to be provisioned on your mobile account. Contact your service provider for details. Please make sure the size of multimedia messages that you send is within the limits allowed by your service provider.
To install MMS settings automatically
1
Tap > Settings > Connections > Connection Setup.
2
Tap OK.
To view a message
1
When you receive a new text or multimedia message,
appears on the screen.
2
Tap > Text.
3
Tap a conversation list.
4
In the conversation list, tap the message.
To create and send a multimedia message
1
Tap
> Text.
2
Tap Menu > New > Multimedia Message.
3
Tap a template or tap to open a blank picture message.
28
Browsing the Web
Connecting to the Internet
You can connect to the Internet by using GPRS/HSPA or Wi-Fi. Before connecting to the Internet by GPRS/HSPA you need the correct Internet settings in the phone. The settings are usually saved on the SIM card the first time you start up the phone after inserting the SIM card. If not, you can download settings automatically, or contact your service provider to get the required information for entering the settings manually.
Automatical download of settings may not be available in all markets.
To start browsing
1
Tap
> Internet Explorer.
2
Enter the Web address in the address field, and then tap
.
Wi-Fi (Wireless LAN)
You can connect your phone to a wireless network to access the Internet. You can connect at home (personal networks) or in public access zones (hot spots).
Personal networks – usually protected. A pass phrase or a key is required from the owner.
Hot spots – usually unprotected, but often require you to log on to the operator's service before you get Internet access.
35
phone to factory settings and delete all phone content, for example if you want to let someone else use your phone.
Before performing a Clear Storage, you need to back up all data, for example photos and music stored in the phone, in order not to lose this data.
To reset the phone to factory settings
1
Remove the battery cover and the stylus. Locate the small hole (see picture).
2
Insert a thin object into the hole and press down.
To reset the phone to factory settings and delete all phone content
Select > Settings > System > Clear Storage.
34
function on. There is thus no need to enter the passcode again.
To accept a Bluetooth™ partnership
1
Check that Bluetooth™ functionality is turned on and your phone is in visible mode.
2
Tap Yes when prompted to establish a partnership with the other device.
3
Enter the same passcode that was entered on the device requesting the partnership, then tap Next.
4
When you are notified that the partnership has been established, tap Done. You can now exchange information with the paired device in a secure manner.
Update Service
You can update the software of your phone in order to improve performance. This is done using the Sony Ericsson Update Service.
To use Update Service
A USB cable is required for this operation.
1
From a PC with an Internet connection, go to
www.sonyericsson.com/update
.
2
Follow the instructions to install the latest available software in your phone.
Resetting the phone
You can reset your phone to factory default settings. You can also use Clear Storage to simultaneously reset your
33
2
Computer: Click Start > All Programs > Windows Mobile
Device Center.
3
Click at the lower left part of the Windows® Mobile Device Center window.
Bluetooth™ partnership
A Bluetooth™ partnership is a relationship you create between your phone and another Bluetooth-enabled device in order to exchange information in a secure manner.
To create a Bluetooth™ partnership
1
Tap > Settings > Bluetooth™.
2
On the Devices tab, tap Add new device. Your phone searches for other Bluetooth-enabled devices and displays them in the box.
3
Tap the desired device in the list, then tap Next.
4
Specify a passcode (1 to 16 characters) to establish a secure connection, then tap Next.
5
Wait for the paired device to accept the partnership. When the receiving party has entered the same passcode that you specified, the name of the paired device is displayed in your phone.
6
Tap the name of the paired device and mark the check boxes for the services you want to use on the paired device.
7
Tap Finish.
Creating a Bluetooth partnership between two devices is a one-time process. Once a partnership is created, the devices will recognize each other automatically when they are close enough and have the Bluetooth
32
before you can start the synchronization. For more information, see Bluetooth™ partnership on page 32.
Wireless connection – Synchronize with an Exchange Server using Exchange ActiveSync® or Windows Mobile Device Center.
You are recommended to synchronize frequently in order to keep the information in your phone and computer up-to-date.
Setting up synchronization
If your computer uses Windows XP® or other compatible Windows operating system, you should use Microsoft® Exchange ActiveSync® 4.5 or later.
If your computer uses Windows Vista®, you should use Windows® Mobile Device Center, which is part of the operating system.
To install Exchange ActiveSync®
1
Go to
www.sonyericsson.com/X2support
to download the latest version of the Exchange ActiveSync® application to your computer.
2
Follow the on-screen instructions to install the software.
To set up synchronization in Windows XP
1
Install Microsoft Exchange ActiveSync® on the computer. For more information, see To install Exchange ActiveSync® on page 30.
2
Connect the phone to the computer using the USB cable that comes with the phone. The Synchronization Setup Wizard automatically starts and guides you through the creation of a synchronization partnership.
3
Computer: Click Next.
30
4
Enter the phone number manually after To: or tap To: to add a number from Contacts.
5
Enter a subject.
6
Tap the image area to insert a photo or a video clip.
7
Tap Insert Text to enter text.
8
Tap Insert Audio to insert audio.
9
Tap Send.
Synchronizing
By regularly synchronizing your data you can always keep the information in your phone up-to-date, wherever you are. You can synchronize several types of information between your phone and a computer:
Microsoft® Outlook® information – e-mail messages, contacts, calendar items, tasks and notes
Media – photos, videos and music
Favorites – Web page bookmarks under Mobile Favorites
Files – Microsoft® Office documents, pdf files, and more
Synchronization methods
After you have installed the synchronization software, you can synchronize your phone with your computer using one of these methods:
USB connection – When you connect a USB cable between your phone and a computer, the synchronization starts automatically.
Bluetooth connection – You must first set up a Bluetooth partnership between your phone and the computer
29
4
To synchronize your phone with the computer, mark the
Synchronize directly with a server running Microsoft Exchange check box and click Next.
5
Select the information types that you want to synchronize, then click Next.
6
Click Finish.
To set up synchronization in Windows Vista
1
Connect your phone to the computer using the USB cable.
2
Computer: The Windows® Mobile Device Center automatically starts. Click Set up your device.
3
Select the information types that you want to synchronize.
4
Type a name for your phone, and click Set Up.
Starting synchronization
To start synchronization from Exchange ActiveSync® on a computer
Connect your phone to the computer using the USB cable. Exchange ActiveSync® opens automatically and the synchronization starts.
To start synchronization from Exchange ActiveSync® in the phone
1
Connect your phone to the computer using the USB cable.
2
Phone: Tap > ActiveSync.
3
Tap Sync.
To start synchronization from Windows® Mobile Device Center on a computer
1
Connect your phone to the computer using the USB cable.
31
To connect to a wireless network
1
Tap > Settings > Connections > Wi-Fi.
2
Tap the network you want to connect to.
3
A number of screens will follow. On each screen, check the information displayed and change if necessary, then tap Next.
4
On the last screen, tap Finish.
To turn on or off Wi-Fi
1
Tap
> Settings > Communication Manager.
2
Mark or unmark the Wi-Fi check box to turn the function on or off, respectively.
Using Wi-Fi consumes battery power. Turn off Wi-Fi when not in use.
TV out
You can view pictures, videos and Office Mobile applications stored in your phone on a TV, LCD monitor or a video projector. Your phone connects to the TV, LCD monitor or video projector through a dedicated TV out cable.
DRM protected movies stored on your phone can not be viewed on a TV or LCD monitor.
To view photos and videos on a TV
1
Connect the TV out cable to the phone and the TV.
2
Tap > Settings > Connections > Communication manager.
3
Tap the DLNA Media Server check box.
4
Tap the file you want to show on the TV.
36
Camera
You can take photos and record videos using the camera in the phone. You will find saved photos and videos by pressing under Media > Pictures and Videos.
Using the camera
1 2 3 4 5
1 Zoom in or out 2 View photos and videos 3 Select video camera 4 Select still camera 5 Activate the camera/Take photos/Record videos
To activate the camera
Press and hold down .
37
To take a photo
1
Activate the camera and tap .
2
Press halfway down to use auto focus.
3
When the focus frame is green, press fully down to take the photo.
To exit the camera
Tap .
The camera closes automatically if you do not use it for two minutes.
Legal information
Sony Ericsson X2
This User guide is published by Sony Ericsson Mobile Communications AB or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/ or equipment, may be made by Sony Ericsson Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this User guide.
All rights reserved.
©Sony Ericsson Mobile Communications AB, 2009
Publication number: 1230-3175.1 Your mobile phone has the capability to download, store and forward
additional content, e.g. ringtones. The use of such content may be restricted or prohibited by rights of third parties, including but not limited to restriction under applicable copyright laws. You, and not Sony Ericsson, are entirely responsible for additional content that you download to or forward from your mobile phone. Prior to your use of any additional content, please verify that your intended use is properly licensed or is otherwise authorized. Sony Ericsson does not guarantee the accuracy, integrity or quality of any additional content or any other third party content. Under no circumstances will Sony Ericsson be liable in any way for your improper use of additional content or other third party content.
38
Please note: Some of the services in this User guide are not supported by all networks. This also applies to the GSM International Emergency Number 112.
Please contact your network operator or service provider if you are in doubt whether you can use a particular service or not.
Bluetooth and the Bluetooth logo are trademarks or registered trademarks of Bluetooth SIG Inc. and any use of such mark by Sony Ericsson is under license.
Wi-Fi is a trademark or a registered trademark of the Wi-Fi Alliance. The Liquid Identity logo and X2 are trademarks or registered trademarks
of Sony Ericsson Mobile Communications AB. Sony and "make.believe" is a trademark or registered trademark of Sony
Corporation. Media Go is a trademark or a registered trademark of Sony Media
Software and Services Ericsson is a trademark or registered trademark of Telefonaktiebolaget
LM Ericsson. Microsoft, Windows, the Windows logo, Outlook, Windows Vista and
ActiveSync are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft.
DLNA is a trademark or registered trademark of the Digital Living Network Alliance.
PLAYSTATION is a trademark or registered trademark of Sony Computer Entertainment, Inc.
Other product and company names mentioned herein may be the trademarks of their respective owners.
Any rights not expressly granted herein are reserved. All illustrations are for illustration only and may not accurately depict the
actual phone. This User guide contains simulated screen images.
39
www.sonyericsson.com
Sony Ericsson Mobile Communications AB SE-221 88 Lund, Sweden
1230-3175.1
FCC Statement
Declaration of Conformity
Sony Ericsson X2
UMTS HSPA Band 1 2 8 GSM GPRS/EDGE 850/900/1800/1900
Important Information United States & Canada
THI S PHO NE MODEL HAS BEE N CER TIFIE D IN COM PLIAN CE WIT H THE GO VERNM ENT’S RE QUIRE MENTS FOR EXP OSURE TO RADIO WA VES.
The X2 S eries mo bile pho nes have been desi gne d to com ply with app licab le safet y req uir ement s for expo sur e to radio wa ves. Your wir eless phon e i s a r adio tran smitt er and r eceiv er. It i s des igned to not exce ed the l imits * o f exp osure to r adi o fre quenc y ( RF) e nergy set by g ove rnmen tal a uth oriti es. T hese lim its e stabl ish perm itted lev els o f R F ene rgy f or the g enera l pop ula tion. The gui delin es ar e bas ed on stan dar ds th at we re de vel oped by interna tio nal s cient ific org aniza tio ns th rough pe riodi c and thor oug h eva luati on of sci entif ic studi es. T he st and ards include a sa fety margin designed to assur e t he sa fety of all i ndivi duals , r egard less of age a nd hea lth.
The radi o w ave e xposu re guide lines empl oy a uni t of mea surem ent know n as the Specifi c Abs orpti on Rate (SAR ). Test s for SAR are cond ucted us ing s tanda rdize d m ethod s wit h t he pho ne tr ans mitti ng at it s hig hest certi fie d pow er le vel in a ll us ed fre quenc y bands. While there may be di ffere nce s bet ween the SA R lev els o f v ariou s pho ne model s, th ey ar e a ll de signe d t o mee t the rel evant gu ideli nes f or expos ure t o rad io waves . For mo re inf ormat ion on S AR, p lea se re fer t o the sa fe an d eff ici ent u se cha pter in the U ser G uid e.
The high est SAR value as repo rted to th e a uthor ities fo r thi s pho ne mo del when test ed for u se by the ear is 1 .19 W /kg *, an d whe n wor n o n the bo dy is 0. 63 W/ kg* for spe ech a nd 0.90 W/k g* for data call s. Body w orn meas ureme nts a re ma de while the phone is in us e a nd wo rn on th e bod y wit h a S ony Eric sson acc essor y sup plied wi th or des ign ated for use w ith this phone . I t is ther efo re rec ommen ded that only Er icsso n and Sony Er icsso n ori gin al acc essor ies be u sed i n c onjun ction with So ny Er icsso n p hones .
**B efore a phone mode l i s ava ilabl e for sa le to the pub lic i n the US, it m ust b e t ested and cert ified by t he Fe der al Co mmuni catio ns Com missi on (FCC) that it d oes not exceed the limit esta blish ed by
2
the gove rnm ent-a dopte d r equir ement for saf e exp osure *. The tes ts ar e per for med i n pos ition s and lo catio ns (i.e ., by the ear and wor n on the bo dy) a s r equir ed by the FCC fo r eac h m odel. The FCC has gran ted an E quipm ent A uthor iza tion for this phon e m odel with all repo rte d SAR leve ls ev aluat ed as in comp lia nce w ith t he FC C RF exp osure gu ideli nes. Whi le th ere m ay be di ffere nces bet ween the SAR leve ls of va rious ph ones, all mobil e p hones gran ted an F CC equ ipmen t a uthor izati on meet the g overn men t req uirem ent for saf e exp osu re. S AR in for matio n on this pho ne mo del i s o n fil e at the FCC and can be fo und unde r the Disp lay Gran t sec tio n of htt p://w ww. fcc.g ov/oe t/f ccid after sear chi ng on FCC ID PY7 A3880 043. Add iti onal inf ormat ion on SAR can be found o n the Cell ula r Tel ecomm uni catio ns & Inter net Asso ciati on (CTIA ) web site at http: //www .phon efa cts.n et.
* I n the Un ited State s a nd Ca nada, the SAR limi t for mo bile pho nes u sed by t he pu bli c is 1.6 w atts/ kil ogram (W/k g) avera ged ove r one gr am of tiss ue. The stand ard i nco rpora tes a ma rgin of saf ety t o g ive a dditi ona l pro tecti on fo r t he pu blic and to a ccoun t for any var iatio ns in me asure ments .
**T his p aragr aph is o nly a pplic abl e to auth ori ties and custome rs in the U nit ed St ates.
3
FCC Statement
Thi s dev ice comp lies wit h Par t 15 of th e F CC ru les. Ope ratio n i s sub ject to the f ollow ing t wo condi tions : ( 1) Thi s dev ice may not c aus e har mful inter fer ence, and (2) Thi s dev ice must acce pt any i nterf erenc e r eceiv ed, i ncl uding int erfer enc e tha t may ca use u ndesi red o per ation .
Any chan ge or mo dific ati on no t exp ressl y a pprov ed by So ny Eri csson ma y voi d the us er's autho rity to opera te th e e quipm ent.
Thi s equ ipm ent h as be en teste d and foun d t o com ply w ith the lim its f or a Cla ss B dig ital devic e, pu rsu ant t o Par t 1 5 of the F CC Rul es. Thes e l imi ts are desi gne d to provid e reason abl e protec tion aga inst har mful inter fer ence in a resid ent ial i nstal lat ion. This equ ipmen t gene rates , uses and can ra diate radi o f reque ncy e nergy and , if not install ed an d u sed i n a ccord anc e wit h t he in str uctio ns, may caus e h armfu l int erf erenc e to radio co mmuni catio ns. How ever, ther e i s no guar antee that inte rfe rence will not occu r in a par ticul ar insta llati on.
If this equ ipmen t doe s c ause harmf ul in ter feren ce to ra dio o r tel evisi on recep tion, wh ich c an be dete rmi ned b y tur nin g the equ ipmen t off and on , the use r is enco ura ged to try t o correc t the int erfer enc e by one o r m ore o f the foll owi ng me asure s:
Reo rient or relo cate the rece iving ante nna .
Inc rease th e sep arati on betwe en th e equ ipm ent a nd re cei ver.
Con nect the equi pme nt in to an ou tlet on a cir cui t dif feren t f rom tha t to whi ch th e rec eiv er is conn ected .
Con sult the deal er or an expe rienc ed ra dio /TV t echni cia n for hel p.
Industry Canada Statement
Thi s dev ice comp lies wit h RSS -210 of In dus try C anada .
Ope ratio n i s sub ject to the f ollow ing t wo condi tions : ( 1) th is dev ice m ay no t c ause interf ere nce, and (2 ) thi s d evice must acce pt any inte rfe rence , inc lud ing i nterf erenc e t hat m ay ca use unde sired ope ratio n o f the devi ce.
Thi s Cla ss B dig ital app aratu s com plies wi th Ca nadia n ICE S-003 .
Cet appa rei l num ériqu e d e la class e B e st confo rme à la norm e NMB -003 du Canad a.
Declaration of Conformity for X2
We, Sony Er icsso n Mob ile C omm unica tions AB of Nya Vatt ent ornet SE- 221 8 8 L und, Swede n dec lare und er ou r sol e r espon sibil ity t hat our produ ct
Son y Eri css on ty pe AA D-3 88004 3-BV
and in c ombin ati on wi th ou r acc ess ories , to whic h t his d eclar ation rel ates is in co nform ity with the appro pri ate s tanda rds EN 3 01 511 :V9.0 .2, EN 3 01 90 8-1 :V3.2 .1, E N 301 90 8-2:V 3.2.1 , E N 300 328 :V1.7 .1, EN 3 01 48 9-7:V 1.3.1 , EN 301 489-17: V2.1. 1, EN 301 489 -24:V 1.4 .1 an d E N 6 0 950-1: 200 6 fol low ing the pro visio ns of, Rad io Eq uip ment and T ele commu nicat ion T erm inal Equip men t dir ectiv e 1999/ 5/EC .
Lun d, Se pte mber 2009
Rik ko Sa kag uchi,
Cor porat e V ice P resid ent and Head of Cr eat ion & Deve lop ment
We fulfi l t he re quire men ts of the R&TTE Di recti ve (1 999 /5/EC ). Ce produ it est c onfor me aux d irect ives de R&TTE (1999/5/E C).
Cum plimo s c on lo s req uis itos de la Dire cti va R& TTE – No rmas sob re eq uipos de term inale s de radi o y t eleco munic aci ones (1999/ 5/E C).
Ate ndemo s a os re quisi tos da D iretr iz R& TTE (1999/ 5/E C).
www.sonyericsson.com
Sony Ericsson Mobile Communications AB SE-221 88 Lund, Sweden
1230-3211.1
Loading...
+ 20 hidden pages