Sony 600TVL O.S.D. WDR SERIES Service Manual

SERVICE MANUAL

1/3” SONY DSP COLOR CCD CAMERA

600TVL O.S.D. WDR SERIES

V.4B_W_M

The serial number of this product may be found
on the bottom of the unit.
You should note the serial number of this unit in
the space provided and retain this instruction as a
permanent record of your purchase to aid
identification in the event of theft.

Model No.
Serial No.

▲ Before attempting to connect this product, please read and keep this
manual for future use.

Safety Warning

1. Do not open the cover, it may cause electric shock.

Ask a qualified service person for maintenance when you encounter any
problems.

2. Install the camera away from TV, radio transmitter, magnet, electric

motor, transformer, audio speakers because the magnetic fields
generated from above devices will distort the video image.

3. Place this camera on a solid base. Install the camera away from

stoves or other heat generating devices as the high temperature could
cause deformation, discoloration or other damages to the camera.
Install the camera at where the temperature range does not exceed

-10°C to 50°C (14°F to 122°F)

4. Do not expose and operate the camera in the rain and humid areas.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an
equilateral triangle, is interned to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.

①

5. Use only soft dry cloth to clean the camera. Also use lens tissue or

cotton tipped applicator and ethanol to clean the CCD sensor and
camera lens.

6. When the camera is not in use, put the cover cap on the lens mount.

Please do not touch the surface of CCD by bare hand.

Introduction

This OSD series CCD camera introduces a new level of high picture quality
through the digital signal processing LSI’s technology for advanced video
surveillance. It provides the most reliable and accurate color picture in the
security industries.

Main Features

z Color camera with SONY 1/3” Super HAD II CCD sensor.
z Employs Digital Signal Processor (DSP) chip-set for image control.
z Ultra high resolution 600TVL (B/W 650TVL).
z High sensitivity CCD enables a clear image even in 0.01Lux.
z Controlled by OSD (On Screen Display) menu.
z Programmable AE / AWB / GAMMA processing.
z 2DNR (2D Noise Reduction), digital WDR (Wide Dynamic Range).
z Motion detection, mirror, privacy mask.
z Parking line guide display, lens shading correction.
z BLC (Back Light Compensation), HLC (Highlight Compensation).
z Auto DPC (Dead Pixel Compensation).

②

Highlight Compensation

Lens Shading Compensation

Wide Dynamic Range

Parts Names & Components

Auto Iris Function

Hex Screwdriver

Auto Iris Plug

C-Mount Ring (Option)

Manual

DC DRIVE

Pin 1 (Red) Drive -
Pin 2 (N.C) Drive +
Pin 3 (White) Damp +
Pin 4 (Black) Damp -

Power LED Selection & setting buttons

Hole to fix lens

Auto iris connector

Screw the auto iris lens on CS mount

Plug in auto iris connector

③