Sony 1/3"" DSP COLOR CAMERA Instruction Manual

INSTRUCTION MANUAL

DSP COLOR CAMERA

1/3" INTERLINE TRANSFER CCD
STANDARD RESOLUTION
HIGH RESOLUTION

Please read this manual thoroughly before use, and keep it handy for future reference.

ii

ISSUE 1 – JULY 2004

iii

WARNINGS AND CAUTIONS

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE
VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT.

CAUTION

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.

The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instruction in the literature
accompanying the product.

iv

FCC COMPLIANCE STATEMENT

FCC INFORMATION :

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO

COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE,
PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE
DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL
INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES,
AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED
AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY
CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE
REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

CAUTION :

CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED

BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA

NORME NMB-003 DU CANADA.

CE COMPLIANCE STATEMENT

WARNING

This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.

v

IMPORTANT SAFEGUARDS

1. READ AND RETAIN INSTRUCTIONS
Read the instruction manual before
operating the equipment. Retain the
manual for future reference.

2. CLEANING
Turn the unit off and unplug from the
power outlet before cleaning. Use a
damp cloth for cleaning. Do not use
harsh cleansers or aerosol cleaners.

3. ATTACHMENTS
Do not use attachments unless
recommended by manufactured as they
may affect the functionality of the unit and
result in the risk of fire, electric shock or
injury.

4. MOISTURE
Do not use equipment near water or other
liquids.

5. ACCESSORIES
Equipment should be installed in a safe,
stable location. Any wall or shelf
mounting accessory equipment should be
installed using the manufacture’s
instructions. Care should be used when
moving heavy equipment. Quick stops,
excessive force, and uneven surfaces
may cause the equipment to fall causing
serious injury to persons and objects.

6. VENTILATION
Openings in the equipment, if any, are
provided for ventilation to ensure reliable
operation of the unit and to protect if from
overheating. These openings must not be
blocked or covered

7. POWER SOURCES
The equipment should be operated only
from the type of power source indicated
on the marking label. If you are not sure
of the type of power supplied at the
installation location, contact your dealer.
For equipment designed to operate from
battery power, refer to the operating
instructions.

8. GROUNDING OR POLARIZATION
Equipment that is powered through a
polarized plug (a plug with one blade
wider than the other) will fit into the
power outlet only one way. This is a
safety feature. If you are unable to insert
the plug fully into the outlet, try reversing
the plug. Do not defeat the safety
purpose of the polarized plug.

Alternate Warning: If the equipment is
powered through a three-way grounding­type plug, a plug having a third
(grounding) pin, the plug will only fit into a
grounding-type power outlet. This is a
safety feature. Do not defeat the safety
purpose of the grounding-type plug. If
your outlet does not have the grounding
plug receptacle, contact your local
electrician.

9. CORD AND CABLE PROTECTION
Route power cords and cables in a
manner to protect them from damage by
being walked on or pinched by items
places upon or against them.

10. LIGHTNING
For protection of the equipment during a
lightning storm or when it is left
unattended and unused for long periods
of time, unplug the unit from the wall outlet.
Disconnect any antennas or cable
systems that may be connected to the
equipment. This will prevent damage to
the equipment due to lightning or power­line surges.

11. OVERLOADING
Do not overload wall outlets and
extension cords as this can result in a
risk of fire or electric shock.

12. SERVICING
Do not attempt to service the video
monitor or equipment yourself as opening
or removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified service
personnel.

vi

13. DAMAGE REQUIRING SERVICE
Unplug the equipment from the wall outlet
and refer servicing to qualified service
personnel under the following conditions:
A. When the power supply cord or the

plug has been damaged.

B. If liquid has spilled or objects have

fallen into the unit.

C. If the equipment has been exposed to

water or other liquids.

D. If the equipment does not operate

normally by following the operating
instructions, adjust only those
controls that are covered by the
operating instructions. Improper
adjustment of other controls may
result in damage to the unit.

E. If the equipment has been dropped or

the casing damaged.

F. When the equipment exhibits a

distinct change in performance.

14. REPLACEMENT PARTS
When replacement parts are required, be
sure the service technician uses
replacement parts specified by the
manufacturer or that have the same
characteristics as the original part.
Unauthorized substitutions may result in
fire, electric shock, or other hazards.

15. SAFETY CHECK
Upon completion of any service or repairs
to the equipment, ask the service
technician to perform safety checks to
verify that the equipment is in proper
operating condition.

16. FIELD INSTALLATION
The installation of equipment should be
made by a qualified service person and
should conform to all local codes.

1

TABLE OF CONTENTS

INTRODUCTION .................................................................................1

CAMERA OVERVIEW .....................................................................2

CONTENTS OF PACKAGE..................................................................6

MANUAL IRIS LENS ADJUSTMENT.....................................................6

VIDEO-TYPE AUTO -IRIS LENS INSTALLATION

AND ADJUSTMENT............................................................................6

DC-TYPE AUTO -IRIS LENS INSTALLATION

AND ADJUSTMENT............................................................................8

BACKFOCUS ADJUSTMENT............................................................. 10

ZOOM LENS BACKFOCUS ADJUSTMENT......................................... 11

TROUBLESHOOTING AND MAINTENANCE........................................ 12

SPCIFICATIONS ............................................................................... 13

2

ABOUT THE 1/3" DSP COLOR CAMERA

INTRODUCTION

The 1/3" DSP color security camera provides SONY, true-color images
especially for closed-circuit television (CCTV) and security surveillance
applications.

Features:

• High-performance 1/3" SONY DSP color Super HAD CCD technology

• NTSC: 330 lines(Color), 380 lines(B/W) of resolution(Standard)

480 lines(Color), 530 lines(B/W) of resolution(High)

• PAL: 320 lines(Color), 360 lines(B/W) of resolution(Standard)
470 lines(Color), 510 lines(B/W) of resolution(High)

• 0.3lux(Color), 0.02lux(B/W) @ F1.2 Sensitivity(Standard)

0.5lux(Color), 0.04lux(B/W) @ F1.2 Sensitivity(High)

• C/CS, backfocus cam for easy adjustment

• Auto electronic shutter [1/60(1/50) ~ 1/100,000] and manual electronic

shutter modes

• Auto and manual white balance modes

• Compatible with video- or DC-type lenses with dip switch select

• Quick connect for video or DC lens with 4-pin connector

• Flicker less, BLC, D/N Conversion(Color/BW), AGC,

D&N(Auto/Manual), Sync adjustments

• 12VDC or 24VAC / 220-240VAC

IMPORTANT: The user of this camera is responsible
for checking and complying with local, state, and
federal laws and statutes concerning the recording and
monitoring of audio signals.