SONY α - 7R III Instruction Manual [fr]

4-728-779-41(1)
Refer to “Help Guide” for in-depth instructions on the many functions of the camera.
« Guide d’aide » (Manuel en ligne)
Consultez le « Guide d’aide » pour obtenir des instructions détaillées au sujet des nombreuses fonctions
E-mount
http://rd1.sony.net/help/ilc/1710/h_zz/
Interchangeable Lens Digital Camera/Instruction Manual GB
Appareil photo à objectif interchangeable/Mode d’emploi FR
Digitalkamera mit Wechselobjektiv/Gebrauchsanleitung DE
de l’appareil.
©2017 Sony Corporation Printed in China
Cámara Digital de Lentes Intercambiables/Manual de instrucciones
Fotocamera digitale con obiettivo intercambiabile/Istruzioni per l’uso
Câmara Digital de Objetivas intercambiáveis/Manual de instruções
Digitale camera met verwisselbare lens/Gebruiksaanwijzing NL
Aparat cyfrowy z wymiennymi obiektywami/Instrukcja obsługi PL
Цифровой фотоаппарат со сменным объективом/Инструкция по эксплуатации
Цифровий фотоапарат зі змінним об’єктивом/Посібник з експлуатації
Digitalkamera med utbytbart objektiv/Handledning SE
Digitaalinen kamera vaihdettavalla objektiivilla/Käyttöopas FI
Digitalkamera med utskiftbart objektiv/Bruksanvisning NO
Digitalkamera med udskifteligt objektiv/Betjeningsvejledning DK
ILCE-7RM3
ES
IT
PT
RU
UA

English

Check out the Help Guide!
The “Help Guide” is an on-line manual that you can read on your computer or smartphone. Refer to it for details on menu items, advanced usage, and the latest information on the camera.
Scan here
http://rd1.sony.net/help/ilc/1710/h_zz/
ILCE-7RM3 Help Guide
Instruction Manual
(this book)
This manual introduces some basic functions.
For the quick start guide, see “Startup guide” (page22). The “Startup guide” introduces the initial procedures from when you open the package until you release the shutter for the first shot.
GB
2
In-Camera Guide
The [In-Camera Guide] shows explanations of the menu items on the monitor of the camera.
You can quickly pull up information during shooting. To use the [In-Camera Guide] function, some settings must be made beforehand. For details, search “In-Camera Guide” in the Help Guide.
Notes on using your camera
Along with this section, also see “Precautions” in the Help Guide (page2).
Screen language
You can select the language displayed on the screen using the menu (page 71).
Notes on handling the product
• This camera is designed to be dust­and moisture-resistant, but is not waterproof or dust-proof.
• When using the power zoom lens, be careful not to get your fingers or any other objects caught in the lens.
• Always attach the lens front cap or body cap when you are not using the camera. To prevent dust or debris from getting inside the camera, remove dust from the body cap before attaching it to the camera.
• Do not leave the lens or the viewfinder exposed to a strong light source such as sunlight. Because of the lens’s condensing function, doing so may cause smoke, fire, or a malfunction inside the camera body or the lens. If you have to leave the camera exposed to a light source such as sunlight, attach the lens cap to the lens.
• When you shoot with backlighting, keep the sun sufficiently far away from the angle of view. Otherwise, the sunlight may enter the focus inside the camera and cause smoke or fire. Even if the sun is slightly away from the angle of view, it may still cause smoke or fire.
• Do not directly expose the lens to beams such as laser beams. That may damage the image sensor and cause the camera to malfunction.
• Do not look at sunlight or a strong light source through the lens when it is detached. This may result in unrecoverable damage to the eyes or cause a malfunction.
• Do not leave the camera, the supplied accessories, or memory cards within the reach of infants. They may be accidentally swallowed. If this occurs, consult a doctor immediately.
Notes on the monitor and electronic viewfinder
• The monitor and electronic viewfinder are manufactured using extremely high-precision technology, and over 99.99% of the pixels are operational for effective use. However, there may be some small black dots and/or bright dots (white, red, blue or green in color) that constantly appear on the monitor and electronic viewfinder. These are imperfections due to the manufacturing process and do not affect the recorded images in any way.
GB
GB
3
• The image may be slightly distorted near the corners of the viewfinder. This is not a malfunction. When you want to see the full composition with all its details, you can also use the monitor.
• If you pan the camera while looking into the viewfinder or move your eyes around, the image in the viewfinder may be distorted or the color of the image may change. This is a characteristic of the lens or display device and is not a malfunction. When you shoot an image, we recommend that you look at the center area of the viewfinder.
• When shooting with the viewfinder, you may experience symptoms such as eyestrain, fatigue, travel sickness, or nausea. We recommend that you take a break at regular intervals when you are shooting with the viewfinder. In case you may feel uncomfortable, refrain from using the viewfinder until your condition recovers, and consult your doctor as necessary.
Notes on continuous shooting
During continuous shooting, the monitor or viewfinder may flash between the shooting screen and a black screen. If you keep watching the screen in this situation, you may experience uncomfortable symptoms such as feeling of unwellness. If you experience uncomfortable symptoms, stop using the camera, and consult your doctor as necessary.
Notes on recording for long periods of time or recording 4K movies
• Depending on the camera and battery temperature, you may be unable to record movies or the power may turn off automatically to protect the camera. A message will be displayed on the screen before the power turns off or you can no longer record movies. In this case, leave the power off and wait until the camera and battery temperature goes down. If you turn on the power without letting the camera and battery cool enough, the power may turn off again or you may be unable to record movies.
• When the temperature of the camera rises, the image quality may deteriorate. It is recommended that you wait until the temperature of the camera drops before continuing to shoot.
• Under high ambient temperatures, the temperature of the camera rises quickly.
• Camera body and battery may get warm with use – this is normal.
GB
4
• If the same part of your skin touches the camera for a long period of time while using the camera, even if the camera does not feel hot to you, it may cause symptoms of a low-temperature burn such as redness or blistering. Pay special attention in the following situations and use a tripod, etc.
–When using the camera in a high-
temperature environment
–When someone with poor
circulation or impaired skin sensation uses the camera
–When using the camera with
the [Auto Pwr OFF Temp.] set to [High].
• Especially during 4K movie shooting, the recording time may be shorter under low temperature conditions. Warm up the battery pack or replace it with a new battery.
Notes on recording/playback
• Before you start recording, make a trial recording to make sure that the camera is working correctly.
• The recorded image may be different from the image you monitored before recording.
• Do not use the camera in areas where strong radio waves or radiation are being emitted. Recording and playback may not function correctly.
• Playback of images recorded with your product on other equipment and playback of images recorded or edited with other equipment on your product are not guaranteed.
• Sony can provide no guarantees in the event of failure to record or loss or damage of recorded images or audio data due to a malfunction of the camera or recording media, etc. We recommend backing up important data.
• Once you format the memory card, all the data recorded on the memory card will be deleted and cannot be restored. Before formatting, copy the data to a computer or other device.
Notes on the Multi Interface Shoe
• When attaching or detaching accessories such as an external flash to the Multi Interface Shoe, first turn the power to OFF. When attaching the accessory, confirm that it is firmly fastened to the camera.
• Do not use the Multi Interface Shoe with a commercially available flash that applies voltages of 250 V or more or has the opposite polarity of the camera. It may cause a malfunction.
Notes on using lenses and accessories
It is recommended that you use Sony lenses/accessories designed to suit the characteristics of this camera. Using this camera with products from other manufacturers may affect its performance, leading to accidents or malfunction. Sony bears no responsibility for such accidents or malfunction.
GB
GB
5
On the data specifications described in this manual
The data on performance and specifications are defined under the following conditions, except as described in this manual: at an ordinary ambient temperature of 25ºC (77°F), and using a battery pack that has been fully charged until the charge lamp has turned off.
Warning on copyright
Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.
Notes on location information
If you upload and share an image tagged with a location, you may accidentally reveal the information to a third party. To prevent third parties from obtaining your location information, set [ to [Off] before shooting images.
Loc. Info. Link Set.]
Notes on discarding or transferring this product to others
When discarding or transferring this product to others, make sure to perform the following operation to protect private information.
• Select [Setting Reset] [Initialize].
GB
6
Notes on discarding or transferring a memory card to others
Executing [Format] or [Delete] on the camera or a computer may not completely delete the data on the memory card. When transferring a memory card to others, we recommend that you delete the data completely using data deletion software. When discarding a memory card, we recommend that you physically destroy it.
Notes on wireless LAN
If your camera is lost or stolen, Sony bears no responsibility for the loss or damage caused by illegal access or use of the registered access point on the camera.
Notes on security when using wireless LAN products
• Always make sure that you are using a secure wireless LAN to avoid hacking, access by malicious third parties, or other vulnerabilities.
• It is important that you set the security settings when using a wireless LAN.
• If a security problem arises because no security precautions are in place or due to any inevitable circumstances when using a wireless LAN, Sony bears no responsibility for the loss or damage.
How to turn off wireless network functions (Wi-Fi, etc.) temporarily
When you board an airplane, etc., you can turn off all wireless network functions temporarily using [Airplane Mode].
Power Cord
For the customers in the UK, Ireland, Malta, Cyprus and Saudi Arabia Use the power cord (A). For safety reasons, the power cord (B) is not intended for above countries/regions and shall therefore not be used there. For the customers in other EU countries/regions Use the power cord (B).
(A) (B)
For Customers in the U.S.A.
If you have any questions about this product, you may call:
Sony Customer Information Center
1-800-222-SONY (7669). The number below is for the FCC related matters only.
Regulatory Information
Declaration of Conformity
Trade Name: SONY Model No.: WW940439 Responsible Party: Sony Electronics
Inc.
Address: 16535 Via Esprillo, San
Diego, CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
GB
For details on the Wi-Fi functions and NFC One-touch functions, refer to the “Help Guide” (page 2).
GB
7
Preparations for shooting
Checking the camera and the supplied items
The number in parentheses indicates the number of pieces.
• Camera (1)
• Battery charger (1)
• Power cord (mains lead) (1)*
* Multiple power cords may be
supplied with your camera. Use the appropriate one that matches your country/region. See page 7.
• Rechargeable battery pack NP-FZ100 (1)
• USB Type-C™ cable (1)
• Shoulder strap (1)
• Body cap (1) (Attached to the camera)
• Cable protector (1)
• Shoe cap (1) (Attached to the camera)
• Eyepiece cup (1) (Attached to the camera)
• Instruction Manual (1) (this manual)
• Reference Guide (1)
GB
8
Identifying parts
See the pages in parentheses for details.
Front side
ON/OFF (Power) switch
(29)/Shutter button (30)
Front dial
You can quickly adjust the settings for each shooting mode.
Remote sensor
Lens release button (28)
Wi-Fi/Bluetooth antenna
(built-in) (50)
Microphone
Do not cover this part during movie recording. Doing so may cause noise or lower the volume.
AF illuminator (59)/Self-
timer lamp
When the lens is removed
Mounting index (27)
Image sensor*
Mount
Lens contacts*
* Do not directly touch these parts.
GB
GB
GB
9
9
Rear side
Eyepiece cup
To remove the eyepiece cup
Push the grips at the bottom of the eyepiece cup to the left and right and lift up the cup.
Remove the eyepiece cup when attaching an angle finder (sold separately). Also, select MENU
(Camera Settings 2)
[FINDER/MONITOR], and then switch to [Viewfinder (Manual)] or [Monitor (Manual)].
Viewfinder
GB
10
C3 button (Custom button 3)
(66)/ (Protect) button
MENU button (57)
Monitor
(For touch operation: Touch panel/Touch pad) (41)
You can adjust the monitor to an easily viewable angle and shoot from any position.
Eye sensor
Diopter-adjustment dial
Adjust the diopter-adjustment dial according to your eyesight until the display appears clearly in the viewfinder. If it is hard to operate the diopter-adjustment dial, remove the eyepiece cup before operating the dial.
Access lamp
For shooting: C4 button
(Custom button 4) (66) For viewing:
(Delete) button
(31)
(Playback) button (31)
MOVIE (Movie) button (31)
For shooting: AF-ON (AF On)
button For viewing:
(Enlarge Image)
button
Rear dial
You can quickly adjust the settings for each shooting mode.
For shooting: AEL button
For viewing:
(Image Index)
button
Multi-selector (18)
Media slot cover switch
For shooting: Fn (Function)
button (18, 66) For viewing:
(Send to Smartphone)
button
You can display the screen for [Send to Smartphone] by pressing this button.
Control wheel (17)
GB
GB
11
Top side/Side view
Image sensor position
mark
• The image sensor is the sensor that converts light into an electric signal. The
mark shows the location
of the image sensor. When you measure the exact distance between the camera and the subject, refer to the position of the horizontal line.
GB
12
• If the subject is closer than the minimum shooting distance of the lens, the focus cannot be confirmed. Make sure you put enough distance between the subject and the camera.
Speaker
(Microphone) jack
When an external microphone is connected, the built­in microphone turns off automatically. When the external microphone is a plugin-power type, the power of the microphone is supplied by the camera.
(Flash sync) terminal
(Headphones) jack
HDMI micro jack
USB Type-C terminal (14,
53)
Charge lamp
Multi/Micro USB Terminal*
(14, 53)
This terminal supports Micro USB-compatible devices.
Multi Interface Shoe*
Some accessories may not go in all the way and protrude backward from the Multi interface shoe. However, when the accessory reaches the front end of the shoe, the connection is completed.
Mode dial lock release button
Mode dial (31)
C2 button (Custom button 2)
(66)
C1 button (Custom button 1)
(66)
Exposure compensation dial
Hooks for shoulder strap
Attach both ends of the strap onto the camera.
(N mark) (50)
• This mark indicates the touch point for connecting the camera and an NFC-enabled Smartphone.
• NFC (Near Field Communication) is an international standard of short-range wireless communication technology.
SLOT 1 (Memory card slot 1)
(24)
Supports SD cards only (compatible with UHS-I and UHS-II)
GB
GB
13
SLOT 2 (Memory card slot 2)
(26)
Supports SD cards (compatible with UHS-I) and Memory Stick PRO Duo media
* For details on compatible
accessories for the multi interface shoe and the Multi/Micro USB Terminal, visit the Sony website, or consult your Sony dealer or local authorized Sony service facility. Accessories for the Accessory Shoe can also be used. Operations with other manufactures’ accessories are not guaranteed.
Notes on USB terminals
You can use either the USB Type-C terminal or the Multi/ Micro USB Terminal for supplying power, charging the battery, and USB communications. However, you cannot conduct these operations with both terminals simultaneously.
• The battery charging time does not change according to the terminal you use.
• You can use accessories for the Multi/Micro USB Terminal, such as a remote commander (sold separately), while supplying power or performing PC Remote shooting using the USB Type-C terminal.
GB
14
Notes on the cable protector
Use the cable protector to prevent a cable from being disconnected when shooting images with the cable connected.
To attach the cable protector
Thread the cable through the cable protector. Open both of the jack covers on the monitor side and insert the cable
into one of the jacks.
Fit the hook of the cable protector
into the slit under the Multi/Micro USB Terminal.
• Attach the cable protector as illustrated so that the upper jack cover fits into the notch in the cable protector, and then insert the claw of the cable protector into the slit next to the HDMI micro jack.
Push the attachment screw in and
turn it to secure the cable protector.
Insert the cable into the holding part
and then secure the cable with the fixing dial.
To remove the cable protector
Loosen the attachment screw. Push down the upper part of the cable protector and pull it out as illustrated.
Attachment screw
Insert the upper jack cover into the notch
Fit the hook into the slit
Fixing dial
GB
GB
15
Bottom
Battery insertion slot (23)
Battery cover (23)
Tripod socket hole
Use a tripod with a screw less than 5.5mm (7/32inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.
Battery cover release lever
16
GB
Basic operations
Using the control wheel
• You can select setting items by turning or pressing the top/bottom/left/ right side of the control wheel. Your selection is determined when you press the center of the control wheel.
• The DISP (Display Setting), are assigned to the top/left/right side of the control wheel. In addition, you can assign selected functions to the left/right/bottom side and the center of the control wheel, and to the rotation of the control wheel.
• During playback, you can display the next/previous image by pressing the right/left side of the control wheel or by turning the control wheel.
/ (Drive Mode), and ISO (ISO) functions
GB
GB
17
Using the multi-selector
• Put your finger right on top of the multi-selector to manipulate it more precisely.
• When [Focus Area] is set to [Zone], [Flexible Spot], or [Expand Flexible Spot], you can move the focus area by pressing the multi-selector up/down/left/right.
• The [Focus Standard] function is assigned to the center of the multi­selector in the default settings.
Using the Fn (Function) button
You can register frequently used functions to the Fn (function) button and recall them while shooting. Up to 12 frequently used functions can be registered to the Fn (Function) button.
1
Press the DISP on the control wheel repeatedly to display a screen mode other than [For viewfinder], and then press the Fn (Function) button.
2
Select the desired function by pressing the top/bottom/left/ right side of the control wheel.
GB
18
Fn button
3
Select the desired setting by turning the front dial, and press the center of the control wheel.
• Some functions can be fine-tuned using the rear dial.
To adjust settings from the dedicated setting screens
Select the desired function in step 2, then press the center of the control wheel. The dedicated setting screen for the function will appear. Follow the operating guide to adjust settings.
Operation guide
How to use the Quick Navi screen
The Quick Navi screen is a function optimized for shooting with the viewfinder, that lets you control settings directly.
1
Select MENU (Camera Settings 2) [DISP Button] [Monitor].
2
Place a mark on [For viewfinder] and then select [Enter].
3
Press the DISP on the control wheel to set the screen mode to [For viewfinder].
GB
GB
19
4
Press the Fn button to switch to the Quick Navi screen.
• The displayed contents and their positions in the illustrations are just guidelines, and may differ from the actual displays.
Auto mode
P/A/S/M mode
5
Select a function to set by pressing the top/bottom/left/right side of the control wheel.
6
Select the desired setting by turning the front dial.
• Some functions can be fine-tuned using the rear dial.
20
GB
To adjust settings from the dedicated setting screens
Select the desired function in step 5, then press the center of the control wheel. The dedicated setting screen for the function will appear. Follow the operating guide to adjust settings.
Operation guide
Note
• Items that are gray on the Quick Navi screen are not adjustable.
• When using functions such as [Creative Style] or [Picture Profile], some
settings can only be controlled from the dedicated screen.
GB
GB
21
Startup guide
Step 1: Charging the battery pack
1
Insert the battery pack into the battery charger.
• Place the battery pack on the battery charger in the direction of the .
• Slide the battery pack in the direction of the arrow as far as it will go.
2
Connect the power cord
CHARGE lamp
(supplied) to the battery charger, and connect the battery charger to the wall outlet (wall socket).
The CHARGE lamp on the battery charger will light up in orange and charging will start.
CHARGE lamp (orange)
Lit: Charging Flashing: Charging error or charging paused temporarily because the camera is not within the proper temperature range
• When charging is finished, the CHARGE lamp and all indicators turn off.
• Charging time (full charge): approximately 150min. (when charging a fully depleted battery pack at a temperature of 25°C (77°F))
• When you use a completely new battery pack or a battery pack that has not been used for a long time, the CHARGE lamp may flash quickly when the battery is charged for the first time. If this happens, remove the battery pack and then re-insert it to recharge.
• Be sure to use only genuine Sony brand battery packs.
GB
To a wall outlet (wall socket)
22
Step 2: Inserting the battery pack into the camera
1
Open the battery cover.
2
Insert the battery pack while pressing the lock lever with the tip of the battery until the battery locks into place.
Lock lever
3
Close the cover.
GB
GB
23
To charge the battery pack while it is inserted in the camera
Turn the camera off and connect it to a device such as a computer using the USB cable. If you turn on the camera, power will be supplied from the computer or the device that you connected, and you will be able to operate the camera. However, the battery pack will not charge. Use the USB Type-C cable (supplied) or a USB-standard cable.
To remove the battery pack
Make sure that the access lamp (page 11) is not lit, and turn off the camera. Then, slide the lock lever and remove the battery pack. Be careful not to drop the battery pack.
Lock lever
Step 3: Inserting a memory card
For details on memory cards that can be used with this camera, refer to page 82.
1
Open the memory card cover.
24
GB
2
Insert the SD card into the slot 1.
Slot 1 (lower): Supports SD cards (compatible with UHS-I and UHS-II) Slot 2 (upper): Supports SD cards (compatible with UHS-I) and Memory Stick PRO Duo media
• With the notched corner facing in the direction illustrated, insert the memory card until it clicks into place.
• You can change which memory card slot to use by selecting MENU
(Setup) [Rec. Media Settings] [Prioritize Rec. Media].
The slot 1 is used in the default settings.
• Use the slot 1 when you are only using one SD card.
• Use the slot 2 when you are using Memory Stick media. In this case, set [Prioritize Rec. Media] to [Slot 2].
3
Close the cover.
Hint
• When you use a memory card with the camera for the first time, it is recommended that you format the card on the camera for more stable performance of the memory card (page 72).
Note
• Do not insert a Memory Stick media into the slot 1. It may cause a malfunction.
Slot 2 Slot 1
GB
GB
25
To remove the memory card
Open the memory card cover. Make sure that the access lamp (page11) is not lit, and then push in the memory card once to remove it.
Access lamp
To record to memory cards in two slots
The slot 1 is used in the default settings. If you do not intend to change the settings and will only use one memory card, use the slot 1. By inserting another memory card into the slot 2, you can record the same images to two memory cards simultaneously or record a different type of image (still images/movies) to each memory card ([Recording Mode] under [Rec. Media Settings]) (page
72).
Step 4: Attaching a lens
1
Remove the body cap from the camera and the rear lens cap from the rear of the lens.
• When changing the lens, work quickly in a dust-free environment to keep dust or debris from getting inside the camera.
• It is recommended that you attach the front lens cap when you have done shooting.
Front lens cap
Body cap
Rear lens cap
26
GB
2
Mount the lens by aligning the two white index marks (mounting indexes) on the lens and camera.
• Hold the camera with the lens facing down to prevent dust or debris from entering the camera.
3
While pushing the lens lightly toward the camera, turn the lens slowly in the direction of the arrow until it clicks into the locked position.
Note
• Be sure to hold the lens straight and do not use force when attaching a lens.
• Do not press the lens release button when attaching a lens.
• The Mount Adaptor (sold separately) is required to use an A-mount lens (sold separately). For details, refer to the operating manual supplied with the Mount Adaptor.
• If you want to shoot full-frame images, use a full-frame size compatible lens.
• When carrying the camera with a lens attached, hold both the camera and the lens firmly.
• Do not hold the part of the lens that is extended for zoom or focus adjustment.
GB
GB
27
To remove the lens
Keep pressing the lens release button and turn the lens in the direction of the arrow until it stops.
Lens release button
Compatible lenses
Lenses compatible with this camera are as follows:
Lens Compatibility with the camera
Lens compatible with 35mm full-
A-mount lens
E-mount lens
* Images will be recorded in APS-C size. The angle of view will correspond to
approximately 1.5 times the focal length indicated on the lens. (For example, the angle of view will correspond to 75mm when a 50mm-lens is attached.)
frame format
APS-C size dedicated lens
Lens compatible with 35mm full­frame format
APS-C size dedicated lens
(An optional Mount Adaptor
(sold separately) compatible with
full-frame format is required)
(An optional Mount Adaptor (sold separately) is required)
*
*
28
GB
Step 5: Setting the language and the clock
1
Set the ON/OFF (Power) switch to “ON” to turn on the camera.
ON/OFF (Power) switch
2
Select the desired language and then press the center of the control wheel.
Control wheel
3
Make sure that [Enter] is selected on the screen and then press the center.
4
Select the desired geographic location and then press the center.
5
Select [Date/Time] using the top/bottom of the control wheel or by turning the control wheel, and then press the center.
6
Select the desired item by pressing the top/bottom/left/right side of the control wheel, and then press the center.
GB
GB
29
7
Repeat steps 5 and 6 to set other items, then select [Enter] and press the center.
Hint
• To reset the date and time setting, use MENU (page 72).
Note
• This camera does not have a function for inserting the date into images. You can insert the date into images and then save and print them using PlayMemories Home (for Windows only).
Step 6: Shooting images in auto mode
1
Press and hold the lock release button in the center of the mode dial, then turn the mode dial to set to
The shooting mode will be set to (Intelligent Auto).
2
Look into the viewfinder or the monitor and hold the camera.
3
Set the size of the subject by rotating the zoom ring of the lens when a zoom lens is attached.
.
4
Press the shutter button halfway down to focus.
• When the image is in focus, an indicator (such as ) will light up.
5
Press the shutter button all the way down.
GB
30
Loading...
+ 685 hidden pages