SONIC RING ELITE TELEPHONE SIGNALER
MODEL TR75
SONIC RING ELITE TELEPHONE SIGNALER
MODEL TR75
SONIC ALERT’S LIMITED
WARRANTY
The Telephone Ring Signaler Model TR75 is warranted against
manufacturing defects in materials and workmanship for two
(5) years from the date of purchase. Within this period Sonic
Alert will repair or replace at our option the TR55 without
charge for parts and labor. Simply send the TR75 (postpaid)
and a copy of your sales slip as proof of purchase to:
Sonic Alert Inc., 1050 E. Maple road, Troy MI 48083
FCC Information
We designed your telephone signaler to conform to federal
regulations, and you can connect it to most phone lines.
However, each TR55 (and other device, such as a phone or
answering machine) you connect to the phone line draws
power. We refer to this power draw as the ringer equivalence
number, or REN. The REN is on the TR55 rating label.
If you use more than one phone or other device on the phone
lines, add up all the REN’s. If the total is more than five,
Phones might not ring. In rural areas, a total of three might
impair ringer operation. If ringer operation is impaired,
disconnect a device from the line.
Your TR55 complies with Part 68 of FCC Rules. You must,
upon request, provide the FCC registration number and the
REN to your local phone company. Both numbers are shown
on the TR55’s rating label.
In the unlikely event that your TR55 causes problems on the
phone line, the phone company can temporarily discontinue
service. If this happens, the phone company notifies you of
these changes in advance. If advance notice is not practical,
the phone company notifies you as soon as possible and advises
you of your right to file a complaint with the FCC.
Also, the phone company can make changes to its lines,
equipment, or procedures that could affect the operation of this
device. The phone company notifies you of these changes in
advance, so you can take the necessary steps to prevent
interruption of your phone service.
Modifying or tampering with your TR55’s internal components
can cause a malfunction and invalidate the TR55’ warranty and
void your FCC authorization to operation it. If the TR55 is not
operating as it should, return it to Sonic Alert. If the problem is
harming the phone lines, the phone company might ask that
you disconnect the TR55 until the problem is resolved.
SONIC ALERT’S LIMITED
WARRANTY
The Telephone Ring Signaler Model TR75 is warranted against
manufacturing defects in materials and workmanship for two
(5) years from the date of purchase. Within this period Sonic
Alert will repair or replace at our option the TR55 without
charge for parts and labor. Simply send the TR75 (postpaid)
and a copy of your sales slip as proof of purchase to:
Sonic Alert Inc., 1050 E. Maple road, Troy MI 48083
FCC Information
We designed your telephone signaler to conform to federal
regulations, and you can connect it to most phone lines.
However, each TR55 (and other device, such as a phone or
answering machine) you connect to the phone line draws
power. We refer to this power draw as the ringer equivalence
number, or REN. The REN is on the TR55 rating label.
If you use more than one phone or other device on the phone
lines, add up all the REN’s. If the total is more than five,
Phones might not ring. In rural areas, a total of three might
impair ringer operation. If ringer operation is impaired,
disconnect a device from the line.
Your TR55 complies with Part 68 of FCC Rules. You must,
upon request, provide the FCC registration number and the
REN to your local phone company. Both numbers are shown
on the TR55’s rating label.
In the unlikely event that your TR55 causes problems on the
phone line, the phone company can temporarily discontinue
service. If this happens, the phone company notifies you of
these changes in advance. If advance notice is not practical,
the phone company notifies you as soon as possible and advises
you of your right to file a complaint with the FCC.
Also, the phone company can make changes to its lines,
equipment, or procedures that could affect the operation of this
device. The phone company notifies you of these changes in
advance, so you can take the necessary steps to prevent
interruption of your phone service.
Modifying or tampering with your TR55’s internal components
can cause a malfunction and invalidate the TR55’ warranty and
void your FCC authorization to operation it. If the TR55 is not
operating as it should, return it to Sonic Alert. If the problem is
harming the phone lines, the phone company might ask that
you disconnect the TR55 until the problem is resolved.
OPERATION
The model TR75 telephone signaler alerts you that your
telephone is ringing by flashing a lamp on and off
automatically. The TR75 can flash lights in other rooms by use
of remote receivers, (Models SA101, SA201, RH100, Sonic
Boom Alarm Clock)
INSTALLATION
1. Plug the modular phone plug at the end of the TR75 cord
into a standard modular phone jack. (Use Jack type USOC
RJIIC) The seven-foot cord is long enough to
accommodate a variety of phone locations.
2. Plug a lamp into the pluglet on the TR75. Make sure the
switch on the lamp is in the “ON” position or the lamp
will not flash when the telephone rings. The switch light
will go on each time the lamp flashes. If the switch light
comes on and the lamp is not flashing, make sure the lamp
is in the on position and the bulb is not burned out.
3. Plug the TR75 into any standard electrical outlet.
4. To use Remote Receivers (Model SA101, SA201, RH100.
BL300 or SB1000) simply plug receiver into a electrical
outlet and plug a lamp into the outlet located on the
receiver, model SA102, SA201and clock.
The TR75 and Remote Receivers are designed for incandescent
light bulbs up to 300 watt. Never use the TR75 with a
fluorescent light or any type of appliance.
MADE IN U.S.A.
1050 East Maple Rd, Troy MI 48083
(248)577-5400 www.SonicAlert.com
OPERATION
The model TR75 telephone signaler alerts you that your
telephone is ringing by flashing a lamp on and off
automatically. The TR75 can flash lights in other rooms by use
of remote receivers, (Models SA101, SA201, RH100, Sonic
Boom Alarm Clock)
INSTALLATION
1. Plug the modular phone plug at the end of the TR75 cord
into a standard modular phone jack. (Use Jack type USOC
RJIIC) The seven-foot cord is long enough to
accommodate a variety of phone locations.
2. Plug a lamp into the pluglet on the TR75. Make sure the
switch on the lamp is in the “ON” position or the lamp
will not flash when the telephone rings. The switch light
will go on each time the lamp flashes. If the switch light
comes on and the lamp is not flashing, make sure the lamp
is in the on position and the bulb is not burned out.
3. Plug the TR75 into any standard electrical outlet.
4. To use Remote Receivers (Model SA101, SA201, RH100.
BL300 or SB1000) simply plug receiver into a electrical
outlet and plug a lamp into the outlet located on the
receiver, model SA102, SA201and clock.
The TR75 and Remote Receivers are designed for incandescent
light bulbs up to 300 watt. Never use the TR75 with a
fluorescent light or any type of appliance.
MADE IN U.S.A.
1050 East Maple Rd, Troy MI 48083
(248)577-5400 www.SonicAlert.com
Loading...