The Lightning flash and
triangle is a warning sign
alerting you of dangerous
CAUTION: TO
REDUCE THE RISK OF
REMOVE THE COVER
(OR BACK) FROM THE
SERVICING TO YOUR
within the triangle is a
warning sign alerting you
of important instructions
arrowhead within the
voltage inside the
product.
ELECTRICAL
SCHOCK, DO NOT
PRODUCT. NO USER
SERVICABLE PARTS
INSIDE. REFER
SONIC ALERT
DEALER.
The exclamation mark
accompanying the
product.
!
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
SONIC ALERT’S 1 YEAR LIMITED WARRANTY
The Sonic Boom Dual Alarm Clock Model SBD375ss is
warranted against manufacturing defects in materials and
workmanship for one (1) year from the date of purchase.
Within this period Sonic Alert will repair or replace at our option
the SBD375ss without charge for parts and labor. Simply
send the SBD375ss (postpaid) and a copy of your sales slip as
proof of pu rchase to:
Sonic Alert Inc., 1050 E. Maple Road, Troy MI 48083
Made in China
Sonic Alert 1050 East Maple Rd. Troy, MI 48083
www.SonicAlert.com 1-800-566-3210 V/TTY
Sonic Boom Dual Alarm Clock
with Bed Shaker
Model SBD375ss
Warning: To prevent fire or shock hazard do not expose this appliance to rain or moisture. Before
connecting to mains make sure that the requirements specified on the apparatus corresponds to the
available power supply i.e. USA: AC 110V / 60Hz.
Made in China
Sonic Alert 1050 East Maple Rd. Troy, MI 48083
www.SonicAlert.com 1-800-566-3210 V/TTY
DUAL ALARM CLOCK WITH ADJUSTABLE TONE, VOLUME, AND
(9) at the same time depressing the “FAST” (6) or the “SLOW”
Lighted dot (4) located in upper left corner of clock display indicates time is PM, no light indicates
Depress “ALARM SET/OFF” (5) button at the same time depressing “FAST” (6) or the “SLOW”
tting the alarm time if you advance more than 24 hours the display (3) will begin to
flash and alarm will sound. To stop flashing, move “FUNCTION SWITCH” (11) up then back to
Once alarm AL1 has been set, slide the “DUAL SETTING SWITCH” (1) to the AL2 position.
the middle
You will see two dots on the right side of the LED display; AL1 (13) and AL2 (14) to show alarms
ION SWITCH” (11) up to the position that you
desire to wake to, you can choose “VIB” for bed shaker, “BUZZ” for sound, and “VIB/BUZZ” for
set for an additional 9
When alarm AL1 goes off, press the “ALARM SET/OFF” (5) button to turn off for the day.
Once both alarms go off and the “ALARM SET/OFF” (5) button has been pressed, alarms will shut
To shut the alarm off permanently, slide the “FUNCTION SWITCH” (11) down to the OFF
UZZ”, “VIB”,
To adjust “TONE CONTROL” (10) turn the wheel on the top right corner of the clock to the
volt alkaline battery in back of clock located
under the “BACKUP BATTERY COMPARTMENT COVER” (17). Battery
not included. NOTE: the LED display will not show during power failure, but
proper time until the power comes
9V IN next to “VIBRATOR INPUT”
VIBRATOR
MODEL SBD375ss
OPERATION INSTRUCTIONS
IMPORTANT- Please read these instructions carefully before use and retain for future
reference.
Warning: To prevent fire or shock hazard do not expose this appliance to rain or moisture. Before
connecting to mains make sure that the requirements specified on the apparatus corresponds to the
available power supply i.e. USA: AC 110V / 60Hz .
UL listed transformer (Underwriters Laboratories)
Setting the correct time-
1) Depress “TIME SET” button (9)
2) As you depress the “TIME” button
(7) minute/hour button to advance clock display until you have desired time.
3)
time is AM.
Setting the alarm time-
1) To set alarm AL1 slide “DUAL ALARM SETTING SWITCH” (1) to AL1 position.
2)
(7) minute/hour button until you reach desired alarm setting.
NOTE: when se
OFF position. When alarm sounds display (3) will also flash.
3) Make sure alarm time is correctly set for AM or PM (4).
4)
Follow the same steps that were taken when setting alarm AL1.
5) Once both AL1 and AL2 have been set, slide the “DUAL SETTING SWITCH” to
position AL1+AL2 for both alarms.
6)
have been enabled. Lighted dots indicate which alarm is set.
Alarm -
1) To enable the alarm function, slide the “FUNCT
Snooze Operation-
Shutting Off Alarm -
Alarm can be shut off temporary for the day or permanently shut off.
Volume ControlTone Control-
Bed Shaker / Vibrator-
Battery Backup-
Features shown on diagrams above:
Switch 8) Snooze Button 14) Alarm 2 (AL2) Indicator
2) Dimmer Switch 9) Time Set Switch 15) Vibrator/Bed Shaker Input
3) Clock Display 10) Tone Control Wheel 16) AC Power Input
4) PM Indicator (12 hr. only) 11) Function Switch 17) Backup Battery Compartment
5) Alarm SET/OFF Switch 12) Volume Control Wheel
6) Fast Min/Hour Button
1) Dual Alarm Setting 7) Slow Min/Hour Button 13) Alarm 1 (AL1) Indicator
GENERAL DATA
Power: Consumption: USA: AC 110V / 60Hz
NOTE: IMPORTANT: do not confuse “AC POWER INPUT” (16) with the “VIBRATOR INPUT” (15).
both. NOTE: whichever function you choose to wake to, will be the same function for both alarms.
1) “SNOOZE” button (8) – press after alarm has gone off. The alarm will reminutes for extra sleep. You may repeat up to 54 minutes.
2) When using “SNOOZE” (8) if alarm AL1 uses snooze, it will not affect alarm AL2.
1)
2)
off for the day and come back on the next day at the same time if alarm settings have not changed.
3)
position. Alarm will not come on until “FUNCTION SWITCH” (11) is set to “VIB/B
or “BUZZ” position.
1) To adjust volume, rotate wheel located on the lower right bottom corner of the clock (12).
1)
desired tone sound.
1) Attach the bed shaker jack to the back of clock at “VIBRATOR INPUT” (15).
2) To turn on vibrator slide “FUNCTION SWITCH” (11) to “VIB” or “VIB/BUZZ” position.
3) Place vibrator between mattress and box spring.
1) To use battery back up, install a 9-
the clock will still be running and keeping
back.AC_9V Power Input-
1) Attach the “AC POWER INPUT” (16) to the back of AC-
(15); it is the smaller input of the two.
Loading...