Sonic Alert SB300SS User Manual 2

The Lightning flash and

p

p

N

arrowhead within the
triangle is a warning sign
alerting you of dangerous
voltage inside the

roduct.

CAUTION: TO
REDUCE THE RISK OF
ELECTRICAL SHOCK,
DO NOT REMOVE THE
COVER (OR BACK)
FROM THE PRODUCT.

O USER
SERVICABLE PARTS
INSIDE. REFER
SERVICING TO YOUR
SONIC ALERT
DEALER.

!

The exclamation mark
within the triangle is a
warning sign alerting you
of important instructions
accompanying the

roduct.

Sonic Boom Alarm Clock

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

SONIC ALERT’S 1 YEAR LIMITED WARRANTY

The Sonic Boom Alarm Clock Model SB300ss is warranted against
manufacturing defects in materials and workmanship for one(1) year
from the date of purchase. Within this period Sonic Alert will repair
or replace at our option the SB300ss without charge for parts and
labor. Simply send the SB300ss (postpaid) and a copy of your sales
slip as proof of purchase to:

SSoonniicc AAlleerrtt IInncc..,, 11005500 EE.. MMaappllee RRooaadd,, TTrrooyy MMII 4488008833

with Bed Shaker

Model SB300ss

Warning: To prevent fire or shock hazard do not expose this appliance to rain or moisture. Before

connecting, make sure that the requirements specified on the apparatus corresponds to the available
power supply i.e. AC 110V/220-340V (50Hz/60Hz)

Made in China

Sonic Alert 1050 East Maple Rd. Troy, MI 48083

www.SonicAlert.com 1-800-566-3210 V/TTY

Sonic Alert 1050 East Maple Rd. Troy, MI 48083

Made in China

www.SonicAlert.com 1-800-566-3210 V/TTY

LED ALARM CLOCK WITH VIBRATOR
MODEL SB300SS

OPERATION INSTRUCTIONS
IMPORTANT- Please read these instructions carefully before use and retain for future

reference.

5) A lighted dot (10) in the upper left hand clock display indicates time is PM, no
light indicates time is AM.

Setting the alarm time-

1) Simply follow the instructions mentioned under “ Setting the correct time”
except that you will have to slide switch (1) to the “AL” position.

2) Make sure the alarm time is correctly set for AM or PM lighted dot (10)
indicates PM). Be sure to release the HOUR and MIN set buttons before
releasing the ALARM button.

Snooze Operation-

SNOOZE button (13) press after alarm has sounded. The alarm will be turned
off for 9 minutes for extra sleep. The alarm will come back again after 9
minutes. You may repeat this cycle many times, up to 59 minutes maximum.

Alarm-

Set the alarm time you wish and slide the VIB / BUZZ, VIB, BUZZ, OFF (8) switch to
the desired position. VIB / BUZZ for both vibrator & sound, or VIB for vibrator only or
BUZZ for sound only. To turn alarm off select the OFF position

Tone-

Adjust the tone (6) by rotating the tone wheel located on the back top right side.

Volume-

To adjust the volume (5) rotate the volume wheel located on back right side.

Bed Shaker / Vibrator- Figure B

1) Attach the bed shaker jack to the back of clock at VIBRATOR input.

2) To turn on vibrator slide switch (12) to VIB or VIB/BUZZ position.

3) Place vibrator under mattress or pillow.

Features:

1) Alarm / Time set 8) AC Power Input

2) Dimmer Switch 9) Vibrator Input

3) Hour Set Button 10) PM Button Indicator

4) Minute Set Button 11) Alarm Indicator

5) Volume Knob 12) Function Switch

6) Tone Knob 13) Snooze Button

7) Battery Cover

Setting the correct time-

1) Slide the setting switch (1) to the position marked “TIME”.

2) Depress the hour button as many times as necessary to advance the clock display
until the hour is correct.

3) Depress the minute button as many times as necessary to advance the clock
display until the minute is correct.

4) Slide the setting switch (1) back to the position marked “LOCK” This will
prevent the clock time from being changed.

AC-9V Power Input -

Attach the AC power supply input to the back of clock at AC-9V IN next to the
VIBRATOR input, smaller input of the two. Important do not confuse input with
vibrator input

Battery Backup-

To use battery backup, you can install a 9-volt alkaline battery in the back of the
clock. Located under the battery cover (7). Battery not included.

GENERAL DATA

Power: 110 Volts, Consumption 8 watts, 60Hz
UL listed transformer (Underwriters Laboratories)

Made in China

Sonic Alert 1050 East Maple Rd. Troy, MI 48083

www.SonicAlert.com

1-800-566-3210 V/TTY