Snooper AVN S9010/20 User Manual

AVN9010/20 V105.15

AVN S9010/20

User manual

AVN9010/20 V105.15

2 • UK

Page

3 Registering AVN S9010/20 4 Introduction Product Functions 5 Notes on Installation 6 Connection Diagrams 9 Notes on Bluetooth Imprtant Notice 10 Basic Operation 11 Radio Operation 14 Satelite Navigation Operation 15 Installing the SD Card System Requirements and Downloading 16 Downloading the AURA™ Camera Database 17 Satelite Navigaon Easy Setup Screen Settings 20 Volume 21 Setting Vehicle Parameters Ventura Setting Vehicle Parameters Syrius 22 Environmental Settings 23 Setting Vehicle Parameters Truckmate 24 Setting Vehicle Parameters Bus Coach 25 Environmental Settings 26 Planning a Route

By Full Postcode

27 Find by City 28 Home 29 Oﬃce Recent Route or Clear Route 30 Multi-route 34 Find by Favourites

Recent Destinations

35 Find by Points of Interest (POI) 36 Find by Nearest POI 38 User POI 42 Find by Map 43 Find by coordinate 44 Re-Route

Avoid by Road Name Avoid by Range

45 Avoid by TMC - AVNS 9020 only Clear Avoided Road 46 Your Route 48 Route Description

TMC (Traﬃc Message Channel) - AVN S9020 ONLY

50 Campsite Search Ventura ONLY 52 My Favourite Menu Favourites 53 Recent Destination 54 Home 55 Oﬃce 56 Conﬁgure Menu Caravan/Motorhome Car 59 Truck 60 Bus & Coach 61 Brightness Control 62 Change Language Setup

2D/3D/North 63 Speed/Time MPH/KMH Arrival Time/Remaining Time

Page 64 Map Text Size Vehicle Icon 65 Lane Guidance Junction Number Display Camera Page 66 Alert Sound School Touch Tone 67 Route Alert Auto Scale My Speed 68 My Speed XL Sharp Curve Alert

69 GPS Status Change Map Colour 70 Qwerty Keyboard 71 System Security Code

Conﬁguration Security Code

72 Route Timer 73 Version (Hardware & Software)

Show POI

74 Route Option

Shortest Time Shortest Distance Avoid Tollway Avoid Motorway 75 Navigate Avoiding Road Avoid by Road Name

Avoid by Range 76 Clear Avoided Road Navigate via Location 77 Change Start Position

Summary Screen

78 Quick Access Menu Volume Scroll Map

Day or Night Settings 79 Camera Alerts Magnify or Reduce Function

81 Understanding the Mapping Screen 82 Updating Maps 83 Troubleshooting Downloads 85 DVD Function Operation 91 Bluetooth Handsfree 94 iPod Function Operation 95 AV Function Operation Auxiliary Function 96 Rear Zone Operation Camera Function Adjustment Button Background Adjustment 97 Sytem Setup Menu 100 Control Calibration 101 Description of the Buttons on Remote Control 103 Precautions 104 Trouble Shooting 105 Product Speciﬁcations 106 Packing List with Built-in NAV Module

Disposal

107 Service Under Warranty

Contents

AVN S9010/20

AVN9010/20 V105.15

AVN S9010/9020 V1 06/15 UK

3 • UK

Return to contents

AVN9010/20 V105.15

Registering AVN S9010/20

IMPORTANT!

PLEASE READ BEFORE USING AVN S9010/20

To enable AVN S9010/20 to locate Fixed Speed Cameras and Accident Black spots you will have to register and download the AURA™ Camera Database.

Register Online Go to the oﬃcial website www.snooperneo.co.uk and register your unit online. Your unit should normally be activated within 30 minutes of registration.

Please Note: To register AVN S9010/20 you will need the serial number of your unit which can be found on the bottom of the device.

Monthly Debit or Credit Card payment of £2.99 inc VAT*

Quarterly Debit or Credit Card payment of £7.99 inc VAT*

Annual Debit or Credit Card payment of £29.99 inc VAT

*Minimum subscription term of 12 months.

Before you begin to use this product, please read this user manual carefully to ensure correct usage and to ensure maximum enjoyment.

Due to continuing improvement the speciﬁcations of this unit may change without further notice.

COPYRIGHT

The copyright of this manual is reserved by the ‘company’ (Performance Products Ltd). All rights are reserved.

This manual may not be copied, reproduced or translated in whole or in part without the express written permission of our company. Our company reserves the right to improve, amend or change the product, and it’s hardware and software.

This manual is an operating and installation guide only.

The product is subject to change without further notice, any revision will appear in the next edition of this guide.

Performance Products Ltd reserves the right of ﬁnal interpretation for the manual.

AVN S9010/20

1. Manufactured under license from Dolby Laboratories.

2. ”Dolby and the “double-D” symbol are trademarks of Dolby Laboratories.

Trademark licence:

AVN S9010/9020 V1 06/15 UK

4 • UK

Return to contents

AVN9010/20 V105.15

Thank you for purchasing the AVN S9010/20. This system is a multifunction car AV entertainment system with an intuitive GUI, which is designed for easy operation. Combined with Snoopers award winning navigation software.

Product Functions

AVN S9010/20

Built-in Functions:

Built-in Navigation, Radio, DVD player, Bluetooth hands-free, display and high power ampliﬁer.

Radio Receiving:

Automatic seeking and radio station presetting are both available. Up to 30 radio stations can be stored. Traﬃc Information can be received via RDS (dependent on geographic conditions)

DVD Player:

DVD/VCD/CD/MP3/WMA/ JPEG/MPEG4 disc.

USB Port:

Supports USB 2.0. Supported media ﬁles formats: MP3/MP4/ MPG/AVI.

Bluetooth Hands-free:

Supports Bluetooth hands-free communication and A2DP music streaming. (Not all Bluletooth devices support A2DP).

TouchScreen:

DisplayScreen:

Wide screen, high deﬁnition,Thin Film Transistor LCD.

TF CardPort

Micro SD card slot for built in navigation.

Optional Function

iPod play function.

Dual Zone The AVN S9010/20 allows rear seat passengers to enjoy audio or video content on additional rear seat monitors and headphones, even while the front passenger and driver listen to audio from other sources or operate navigation functions simultaneously.

Traﬃc Message Channel (TMC) AVN S9020 ONLY

The Traﬃc Message Channel (TMC) is a FM data channel provided by the traﬃc news service that supplies continuously updated ‘real time’ traﬃc data. When your route has been selected, our navigation systems make use of this data to check traﬃc conditions and advise of delays.

AV Function It supports AV input from external equipment.

iPod Play:

Supports iPod audio ﬁles playing. Most Apple devices are supported, such as iPod nano, iPod touch, iPhone 3G/3GS/4/4S/ iPhone5/5S/iPad.

Note: This function is available if it is connected using an iPhone/ iPad cable.

Note : For video function, users should use genuine Apple sync cable. Note: As a result of the continuous upgrading of iOS, this function may be invalid after an iOS update.

Navigation

Street level navigation provided by Snooper. A choice of Syrius, Truckmate and Ventura navigation packages are available.

Reversing Camera (optional)

Snooper provide a range of reversing cameras specially designed to operate with the AVNS 9010. Please contact your local Snooper dealer for further details or visit www.snooper.co.uk

Audio Output Port:

It has 4 channel and 5.1 channel audio output ports, compatible with the external ampliﬁer.

EQ Modes:

Standard, Custom, Pop, Rock, Classic, and Jazz.

Tone Modes:

Features Treble, Mid and Bass adjustments.

Spectrum Display Modes:

5 spectrum modes are available.

Display System:

Auto PAL NTSC compatible.

AVN S9010/9020 V1 06/15 UK

5 • UK

Return to contents

AVN9010/20 V105.15

Notes on Installation

We recommend this unit should be installed by a qualiﬁed technician. If you intend to install this unit by yourself please refer to the supplied Installation/connections manual .

Improper installation may cause battery drain or a short circuit. If the unit does not work refer to the Troubleshooting Guide on page 102 of this manual. Check the connections, referring to the supplied installation/connections manual.

Considerations:

 Protect the unit screen from damage during the installation.  Do not expose the unit surface to chemicals, such as insecticide, insect repellent, etc.  When installing, be sure to ﬁx securely. Snooper recommends the AVN S9010/20 Install kit (not supplied).  Switch the ignition Oﬀ durning the installation. Installing the unit with the ignition On may cause battery drain or a short circuit.  When installing, be sure not to damage or trap any car parts such as pipes, fuel tank or wiring by using a drill, as this may cause a

ﬁre or damage to the vehicle.

 Run all ground (earth) leads to a common ground (earth) point.  This unit is designed for negative ground (earth) 12 V DC operation only.  Do not disassemble or modify the unit.  Do not install in locations which interfere with airbag operation.  Do not trap the leads under screws, or catch in moving parts (e.g. seat railing).  Before making connections, turn the car ignition oﬀ to avoid short circuits.  Connect the power supply connection cables to the unit and speakers before connecting it to the auxiliary power connector.  Be sure to insulate any loose unconnected leads with electrical tape or heat shrink for safety.  Do not press on the LCD when installing the unit.  Install the unit with the monitor facing straight forward; do not install it at an angle.  If your car was parked in a cold or hot place, the picture may not be clear. However, the monitor is not damaged, and the picture

will become clear after the temperature in your vehicle becomes normal.

 Some stationary blue, red or green dots may appear on the monitor. These are called “bright spots,” and can happen with any LCD.

The LCD panel is precision-manufactured with more than 99.99% of its segments functional. However, it is possible that a small percentage (typically 0.01%) of the segments may not light up properly. This will not, however, interfere with your viewing.

Notes on the power supply lead (yellow)

When connecting this unit in combination with other stereo components, the connected car circuit’s rating must be higher than the sum of each component’s fuse.

When no car circuits are rated high enough, connect the unit directly to the battery.

Warning if your car’s ignition has no ACC position After turning the ignition oﬀ, be sure to press and hold OFF on the unit until the display disappears. Otherwise, the display does not turn oﬀ and this causes battery drain.

AVN S9010/20

AVN S9010/9020 V1 06/15 UK

6 • UK

Return to contents

AVN9010/20 V105.15

Connection Diagrams

BATT p +12Vower supply

CDC BATT Disc changer power +

ACC ignition

BACK Back inspect

ILL+ illumination inspect

FR Right front loudspeaker

FL Left front loudspeaker

GND connect to ground wire

ANT-C Antenna control

BRAKE Handbrake control

Yellow

Connected to battery +

Radio antenna

Plug-in TV/AV input port (Optional)

Brown: ① 3G/WiFi modem for internet (Optional) or ② USB Multimedia (Optional) or ③ iPod Via USB (use data wire for Apple devices)(Optional) Note: USB data wire for online surﬁng is required

Red: Port for AV output (Optional)

Green: Port for 5.1 channel audio output (Optional)

Orange: Port for plug-in microphone

USB1 one out of three

Alternative

A

B

C

D

E F

G

H

I

①USB2 (Reserved) or ②USB2: Multimedia (Optional)

Port for tyre pressure monitor test mode (Optional)

① Plug-in video RGB input port (RGB conversion equipment is required)(Optional)

or

② AV input B wires is required USB-ipod video input

or

③ Port for iPod input (iPod data line is required) (Optional)

Reversing sensors (Not used)

Navi GPS antenna

TV (NOT USED)

Connected to -ve

Connected to ignition/acc switch

Connected to handbrake

switch

(Optional )

Connected to illumination power switch

Left front loudspeaker

Connected to reversing light +

Connected to radio antenna control wire or connected to aerial ampliﬁer power cord

Blue/Black

Blue/White

Orange

Brown

White

White black

Gray

Grayblack

Green

Green black

Purple

Connected to disc changer power cord

CDC GND Disc changer power

ground

FL- Left front loudspeaker -

FR -Right front loudspeaker-

RL Left rear loudspeaker

- -

RR Right rear loudspeaker

RR -Right rear loudspeaker -

Right front loudspeaker

Left oudspeakerrear l

Right rear

loudspeaker

Red

Black

Yellow

Black

Purple black

+ 5V output

Inferface reserved

Black

White

Green

+ 10V output

GND Ground wire

KEY–A/D1 Keying line 1

KEY–A/D1 Keying line 2

AVN S9010/9020 V1 06/15 UK

7 • UK

Return to contents

AVN9010/20 V105.15

Rear Camera input

Not used

AVN S9010/9020 V1 06/15 UK

8 • UK

Return to contents

AVN9010/20 V105.15

AVN S9010/9020 V1 06/15 UK

9 • UK

CAUTION

IN NO EVENT SHALL SNOOPER BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER’S TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE.

IMPORTANT NOTICE!

Safe and eﬃcient use

Changes or modiﬁcations to this unit not expressly approved by Snooper may void the user’s authority to operate the equipment.

Please check for exceptions, due to national requirement or limitations, in usage of Bluetooth equipment before using this product.

Driving

Check the laws and regulations on the use of mobile phones and hands free equipment in the areas where you drive.

Always give full attention to driving and pull oﬀ the road (when safe and legal to do so) and park before making or answering a call.

Connecting to other devices

When connecting to any other device, please read its user guide for detailed safety instructions.

Radio frequency exposure

RF signals may aﬀect improperly installed or inadequately shielded electronic systems in cars, such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems or air bag systems. For installation or service of this device, please consult with the manufacturer or its representative of your car. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to this device.

Consult with the manufacturer of your car to ensure that the use of your cellular phone in the car will not aﬀect its electronic system.

Check regularly that all wireless device equipment in your car is mounted and operating properly.

Emergency calls

This Bluetooth car hands free and the electronic device connected to the hands free operate using radio signals, mobile, and landline networks as well as user-programmed function, which cannot guarantee connection under all conditions.

Therefore do not rely solely upon any electronic device for essential communications (such as medical emergencies).

Remember, in order to make or receive calls, the hands free and the electronic device connected to the hands free must be switched on in a service area with adequate cellular signal strength.

Emergency calls may not be possible on all mobile phone networks or when certain network services and/or phone features are in use.

Check with your local service provider.

AVN S9010/9020 V1 06/15 UK

10 • UK

Return to contents

AVN9010/20 V105.15

Basic Operation

1.1 Turn on/oﬀ the AVN S9010/20

 Turn on

The unit will switch on an oﬀ automatically with the ignition key. If connected to the accessory/ignition circuit on the vehicle.

 Turn oﬀ

Switch oﬀ the vehicle and the system will automatically turn oﬀ the unit.

If the AVN S9010/20 is not connected to the accessory/ignition circuit press and hold the power button for more than two seconds, and the system will turn oﬀ automatically.

1. 2 Enter to Home Page Menu

When the AVN unit is powered On it will always start in Radio mode.

To enter the ‘home page menu’ switch the AVN on and press anywhere on the touchscreen.

To select a function or Mode press the corresponding icon.

Note: If, when an Icon is precessed and the message “Device Not Connected’ is displayed, this indicates that there are no connections between the AVN unit and the peripheral unit.

1. 3 Spectrum Display

While the spectrum display is enabled, the screen will automatically switch to spectrum mode if there is no operation within 10 seconds

when playing in radio, DVD or disc changer status, or CD.

When playing a DVD, open the home page, the screen will switch to spectrum mode after 10 seconds..

Touch “SPECTRUM” icon to switch to diﬀerent spectrum display modes (as ﬁgure shows).

1.4 Sound Field Mode

During spectrum mode interface, touch

to switch to

diﬀerent sound ﬁeld modes.

 CUSTOM

 ROCK

 JAZZ

 POP

 CLASSIC

 STANDARD

Panel Board Spectrum Rectangle Spectrum

AVN S9010/9020 V1 06/15 UK

11 • UK

Return to contents

AVN9010/20 V105.15

1.5 Volume adjustment of AVN S9010/20

Plus and Minus buttons to adjust the volume (Not Navigation).

Press the mute button to mute the unit, if mute is pressed then

.

Radio Operation

2.11 Enter/Exit

Touch the “MAIN” icon to enter home page interface,and touch

to enter

radio interface.

On radio interface, the small spectra shown in the right-side of screen, click the icon “EXIT” to return to Main menu. If no operation within 10 seconds, the unit enters the spectra mode.

Touch the icon “SPECTRUM” to adjust the spectra value, touch the screen again to return to the radio interface .

Touch the icon “Main menu” to enter Main menu, touch these icons to enter the corresponding interface.

2.12 Automatic Search

Touch

icon to enter automatic search status, and save the station automatically

during automatic search.

Touch the

icon again to stop automatic search.

18 radio stations can he stored for FM (6 stations for each of FMl, FM2 and FM3), 6 stations can he stored for AM.

2.13 Semi-automatic Search

Touch icon to seek previous or next available stations. To program the station, press and hold preset station button. During ‘seek’ the blue bar will move through the frequency range.

To stop semi-automatic seek press the ‘seek’ icon again

2.14 Band Selection

Touch “Band” icon slightly to switch between FM1, FM2, FM3 and AM.

2.15 Play Selected Radio

Select the band ﬁrst, and then press and hold one of the preset bars to set the station.

Selected station will be highlighted.

For example: The ﬁgure on the right represents AM, and frequency of 972kHz.

FM: 87.50MHz-108.00MHz AM: 522KHz-1620KHz

AVN S9010/9020 V1 06/15 UK

12 • UK

Return to contents

AVN9010/20 V105.15

2.1.16 Radio keyboard input

Click

icon to display the input keyboard, you can then enter the radio

frequency manually. Input the frequency then press OK.

EG: If the radio is in AM mode and you want to tune to 909MHz simply type 909 into the keyboard and press OK to conﬁrm, the radio tuner will now tune to 909MHz.

For FM, 87.5MHz, type 8750 then press OK to conﬁrm the radio tuner will tune to

87.50MHz on the FM band.

2.1.17 Programme Type (PTY)

If the radio tuner is on the FM band and Radio Data System (RDS) is switched ON then by pressing the PTY button the radio will search for a particular type of programme.

The radio will then scan the frequency range to look for the programme type selected. If one is found, the radio will tune in to the station. There are several Programme Types. These include NEWS, CURRENT AFFAIRS, INFO(information), SPORT, EDUCATION, DRAMA, CULTURE, SCIENCE, POP MUSIC, ROCK MUSIC, MOR(middle of the road), LIGHT MUSIC (light classical music), OTHER MUSIC, CLASSICS (more ‘serious’ classical music) and VARIED (speech and/or music).

Not all types are availble in all countries

NOTE: If the PTY button is pressed but it does not respond, the radio tuner is either not on FM or RDS is switched Oﬀ. Press or to move to the next radio station.

AVN S9010/9020 V1 06/15 UK

13 • UK

Return to contents

AVN9010/20 V105.15

Enhanced Other Networks (EON)

The RDS tuner has EON facility, which oﬀers the ability for local stations to ‘break into’ a national station’s broadcast for the duration of a Traﬃc Announcement. EG: When listening to a BBC national station, such as BBC Radio 3, EON will tell the radio about any traﬃc bulletins being broadcast by BBC stations in the local area.

The radio would switch to the local BBC radio station for the travel bulletin, then back to the national station when the bulletin had ﬁnished. For example, when travelling through Manchester whilst BBC Radio 2 is tuned-in, the radio will switch to BBC Radio Manchester for any travel bulletins, with the TA function switched on.

This facility is not available in all countries or regions

Traﬃc Announcement (TA)

The radio display can show if the station broadcasts travel information.

The Traﬃc Announcement (TA) feature allows interruption of a CD or cassette tape when there is a travel report from the radio station that is currently tuned-in. The radio will automatically switch from CD or USB to the radio for the duration of the travel announcement.

For the TA feature to work the function marked TA must be switched on.

This facility is not available in all countries or regions

Alternative Frequency (AF)

If RDS is enabled the radio will retune to a diﬀerent frequency when the current signal becomes too weak, assuming an alternative frequency is available for the station. For this to happen, the AF function must be switched on. Sometimes the radio will keep trying to ﬁnd a stronger signal for the station.

This can become distracting as the radio retunes itself, but can be overcome by switching the AF function oﬀ.

This facility is not available in all countries or regions

AVN S9010/9020 V1 06/15 UK

14 • UK

Return to contents

AVN9010/20 V105.15

Satellite Navigation Operation

Start Navigation

To enter navigation press

on the main menu screen or the Navi button on

the front of the unit.

The ﬁrst time navigation is used the following screen will be displayed. Please wait while navigation initialises for the ﬁrst time

Note: In navigation mode press Navi button to exit navigation. Do not remove the MicroSD card when navigation is active. If navigation is active the touch screen will only access the navigation functions, to access any other function, such as the radio tuner or CD, please press Navi to exit navigation (navigation will still be active in the background) .

To listen to radio, CD, or Ipod whilst using navigation simply press the Navi button. When there are navigation voice instructions the music source will be muted and the navigation voice prompts will be played (through the front speakers ONLY).

Volume adjustment

In navigation when voice prompts are active the volume

will adjust the navigation volume.

When no voice prompts are active then the volume

will adjust the music source, such as radio, CD etc.

Note: In ‘system settings ‘ the navigation prompts, which override the source can be switch on or oﬀ

AVN S9010/9020 V1 06/15 UK

15 • UK

Return to contents

AVN9010/20 V105.15

Installing the SD Card

To start navigation switch AVN S9010/20 on and press the NAV button Press the ‘Navi’ icon. When the ‘Navi’ icon is pressed the AVN S9010/20 will automatically synchronise the AVN S9010/20 serial number with the SD Card. Once the synchronisation is completed, the SD Card will not function with any other device. The AVN S9010/20 is now ready to navigate and the camera database can be downloaded if necessary.

NOTE: Take care when inserting and removing the Micro SD card from the AVN S9010/20

System Requirements and Downloading

Before you can begin to download the database onto AVN S9010/20, you will need to install the AVN S9010/20 Updater software provided on the software CD.

In order for the software to be installed successfully, there are certain minimum hardware and software requirements needed.

Hardware Requirements

The computer must have an Intel Pentium Class processor or equivalent, a minimum of 32MB of RAM, a monitor with 256 (8-bit) colours or greater, a CD ROM drive, 20MB of free disc space and a spare USB connection.

Software Requirements

The software will only operate on the following Windows based operating systems: Windows Vista Windows 7 Windows 8

NOTE: AVN S9010/20 Updater software does not support Windows 95, 98, Millennium, 2000 or Apple Macintosh operating systems. Windows XP systems are also not supported.

Software Installation Instructions

Place the Software CD into a CD ROM or DVD drive. Your PC should automatically open a window displaying the instructions for installing the software. Follow the instructions onscreen to install the speed camera updater software.

To launch the CD manually: Click on ‘Start’ and then ‘Run’. In the dialogue box that opens click on ‘Browse’ – another dialogue box will open. Locate your CD ROM or DVD drive (drive letter is normally D) using the ‘Look in’ option and select ‘AVN S9010/20’ from the lower portion of the dialogue box. Once you have selected ‘AVN S9010/20’ click on ‘Open’ on the explorer box and then ‘OK’ on the Run dialogue box.

Please make sure that the operating system installs the new hardware ﬁrst before installing the Camera Updater software. Once the updater software has been installed click ‘Finish’ and then close the CD auto run window. After installing the software, click ‘Start’ then ‘All Programs’ and select the updater program to start it. Select your ‘Language’, ‘Vehicle Type’ and ‘Download Settings’ when prompted.

Any updates to the speed camera updater software can be obtained from www.snooperneo.co.uk/software.cfm. If you have any problems using this software please call 0333 240 1000 during oﬃce hours and select Option 3.

Once the software is installed, you are ready to download the speed camera database onto AVN S9010/20.

Lift the cover to access the SD card

AVN S9010/9020 V1 06/15 UK

16 • UK

Return to contents

AVN9010/20 V105.15

Downloading the AURA™ Camera Database

Please Note: You must register AVN S9010/20 before you can perform a download.

Performing a download is simple.

1. Switch oﬀ the AVN S9010/20 and carefully remove the Micro-SD card from the AVN S9010/20. Insert the card into the Micro-SD card reader provided.

2. Double left click the Syrius/Truckmate/Ventura icon on your desktop to open the program.

3*. Left click ‘Menu’ in the top left hand corner of the program window

and left click ‘Download Settings’. Once you have selected what camera data you want to download ‘Click OK’.

4. Connect the Micro-SD card reader to a spare USB socket on the PC.

5. The updater software will then start to run automatically and download the database ﬁles that you have selected onto your unit. The download process is as follows:

 The software will display the serial number of the AVN S9010/20 and a green progress bar will start to progress across the screen.

 The software will then connect to our database server and then download** the speed camera database.

 The software card will then save the data on to the micro-SD card..

 Finally, the software will indicate that the download is complete and will instruct you to disconnect the unit from your PC.

*You only need to do these steps if you wish to change the data that is downloaded onto the AVN S9010/20. If you want the download settings to be the same as the previous download ignore this step.

**If you have a Firewall on your computer, the Firewall software may inform you that the updater software is trying to access the internet. Please make sure that you grant/allow/permit access to the updater program through the Firewall.

Please read the messages supplied by your Firewall software carefully before choosing your option. If you do not allow the program to access the internet through the Firewall, the download process will fail. Once the download is complete, remove the Micro-SD card from the reader and reinsert it back into the AVN S9010/20.

Micro SD card reader

AVN S9010/9020 V1 06/15 UK

17 • UK

Return to contents

AVN9010/20 V105.15

Satellite Navigation

1. Starting Up

First make sure your vehicle is parked in as open a space as possible, clear of tall trees and buildings so that the GPS antenna has a clear view of the sky above. Switch the unit to navigation mode by pressing the NAV button. If this is the ﬁrst time the unit has been used the screen calibration will be shown, follow the on screen instructions to complete the screen calibration.

After the screen has been calibrated, a warning will be displayed (see images on the right).

Please read the warning and select the relevant vehicle type (where applicable).

Press “I Agree”

to continue.

Whilst AVN S9010/20 software is loading a start-up display will be shown for just a few seconds and then the screen will show a section of a map. AVN S9010/20 needs to acquire a minimum of four satellites in order to work. Once this has been achieved AVN S9010/20 will ascertain your position and this will be indicated by a green arrow icon on the on-screen map and the GPS signal strength will be shown in the bottom right hand corner of the display. AVN S9010/20 is now ready to navigate.

As the GPS engine and antenna have never been used before, the ﬁrst ‘Cold’ start can take anywhere from 15 – 30 minutes to establish a satellite connection. Once initialised, subsequent start ups will take less time and eventually should take only a matter of minutes.

2. Easy Set Up

2.1 Screen settings

There are a number of map views or diﬀerent types of information that can be displayed on the screen at any one time:-

3D 2D North

1

2

3

4

5

6

7

8

9

10

Power button

NAV button

AVN S9010/9020 V1 06/15 UK

18 • UK

Return to contents

AVN9010/20 V105.15

Lane Guidance.

Snoopers’ advanced lane guidance will assist the driver by clarifying which lane the vehicle should be using. Snooper has extensive coverage of motorway, complex junctions, some dual carriage way exits and some inner city junctions. The criteria for lane guidance is that the turning lanes or exit lanes will have more than ONE lane to be included.

My Speed

The speed limit of nearly every road across Europe can now be clearly displayed on your AVN S9010/20 at all times. Choose between speed limits for cars and advisory speed limits for trucks from 3.5t and over. In addition, My Speed can also be set to alert you if you accidentally exceed the speed limit at any time. Inappropriate speed is often responsible for many road accidents resulting in serious injuries which some times can even be fatal. MY-SPEED will ensure that you know what the speed limit is on every road you travel on so you can drive safely at all times.

The text will show RED when the speed limit is exceeded

My Speed sounds an audible alert speed limit is exceeded and the current speed

3

Indicator will change

from Black to RED text. Refer to page 65 for full details and settings

3

or Current speed or time - Press to change the displayed information.

4

Indicates the current direction of travel

5

Current road name or road number.

6

Distance to destination

7

or

Displays the Estimated Time of arrival or remaining journey time. Press to change the displayed information.

8

Current satellite signal strength

9

This pop up box will be displayed when The indicator will count down the distance. the driver needs to take ‘action’ eg move to the left in 0.59 miles.

10

Route timer. Set Route timer to alert you when you need to take a break. Set the maximum driving time

allowed and set the advanced warning time you require before your next break is due. The Route timer clock will keep you advised of the driving time you have left and will automatically alert you when it’s time to take a break. Refer to page 70 for details.

1

2

PLEASE NOTE: These are advisory speed limits ONLY. Always check local road side speed limit signs and abide by local driving regulations and laws of the country you are driving in. It is the responsibility of the driver of the vehicle to ensure that they are driving within the posted speed limit at ALL times

AVN S9010/9020 V1 06/15 UK

19 • UK

Return to contents

AVN9010/20 V105.15

Additional warning or information pop ups will appear at the bottom left hand corner of the screen. If lane guidance is displayed then the warning pop ups will be displayed at the top left hand side of the screen.

or ONLY - Restriction and warnings will be displayed in the bottom left hand side of the screen, if lane guidance is also

being displayed the restriction and/or warning will be displayed in the top left hand corner of the screen.

Junction view

Full screen images of main motorway junctions are displayed in advance to help you navigate more safely. These junction view images will be displayed on the screen for approximately 5 seconds

Examples of Junction view.

Restrictions

Heigh

t

W

idth

L

ength

W

eight

No trucks allo

wed

No tr

ailers

No U-tur

n for trucks

No r

ight turn for trucks

No lef

t turn for trucks

T

rucks with hazardous

goods forbidden

T

rucks with natural goods

harmful to water forbidden

Warning

St

eep road up ahead

St

eep road down ahead

T

ight bend ahead

Side winds

Risk of grounding

AVN S9010/9020 V1 06/15 UK

20 • UK

Return to contents

AVN9010/20 V105.15

To modify the information shown:

 Press the centre of the screen to access the menu.  Press the ‘Conﬁgure’ button.

 Press the icon where you will see the list of options below.  Select the option you wish to change on the left.  To change a setting, simply press on the radio button to indicate which option you would like to choose.  Continue to select each option and select your preference.  Press ‘OK’ at the bottom of the screen to save your preferences.

Your chosen settings will now be saved and will appear on the screen each time you use Snooper. If you want to switch between your Current Speed and the Atomic Clock or the Estimated Time of Arrival and Time to Destination during your journey simply touch the screen where either piece of information is displayed and the unit will display the alternate setting and vice versa. However each time you power the device up the original setting will be displayed.

use the up and down arrows to scroll to other options

AVN S9010/9020 V1 06/15 UK

21 • UK

Return to contents

AVN9010/20 V105.15

Setting up vehicle parameters

For Ventura to calculate a route suitable for your vehicle it needs to know certain information about the vehicle itself such as its height, weight and width. It is possible to save the settings of 10 diﬀerent vehicles. Follow these instructions to enter your vehicles details.

Press the centre of the screen to access the menu, press ‘Conﬁgure’ and then press the ‘Caravan/Motorhome’ icon.

Name: Enter the name here.

Height: Enter the height of the vehicle here.

NOTE: Maximum height including any protrusions (roof box, TV antenna etc)

Length: Enter the length of the vehicle here.

Weight: Enter the weight of the vehicle here.

Width: Enter the width of the vehicle here.

NOTE: Caravan - the maximum height, width and length must include the dimensions of the vehicle towing the caravan, whichever is the greatest (e.g. the car wing mirrors may be wider than the caravan being towed). The combined weight of the caravan and the vehicle must also be used.

Weight per axle: Enter the weight per axle of the vehicle here

Vehicle type:

 Fixed Axle: Standard setting for ﬁxed axle vehicles.

 Trailer: Speciﬁc traﬃc rules exist for vehicles towing caravans. For example, there are roads that are forbidden for towing vehicles.

These will be avoided.

Setting up vehicle parameters

To enter the emission settings of your vehicle in car mode press the and enter the details as shown in the Environmental

setting section page: 21.

AVN S9010/9020 V1 06/15 UK

22 • UK

Return to contents

AVN9010/20 V105.15

Environmental settings or Low Emission Zones (LEZ)

Low Emission Zones (LEZs) are areas or roads where the most polluting vehicles are restricted from entering. This means that vehicles are banned, or in some cases charged, if they enter the LEZ when their emissions are over a set level.

Vehicle emissions are classiﬁed by Euro Standards (1-6) for the vehicles that they aﬀect. In many cases another factor is whether or not the vehicle has a particulate ﬁlter or catalytic converter. Before you travel into a LEZ, you need to ﬁnd out the emissions standard of your vehicle.

All LEZs aﬀect heavy duty goods vehicles (usually over 3.5 tonnes Gross Vehicle Weight (GVW)), and most buses and coaches (usually deﬁned as over 5 tonnes GVW). Some LEZs also aﬀect vans, cars and motorcycles.

Most LEZs operate 24 hours a day, 365 days a year, with some of the Italian LEZs currently the only exceptions to this rule. To enter your environmental setting press on the arrow once in the Environmental setting page press the arrow again to return to the vehicles setting page.

Click on the options to edit the

information

Enter number of passengers carried. Enter fuel type

Enter vehicle

production date in

YYYY-MM format

Select Euro rating

press OK to save

Retroﬁt - switch

between yes (Y) and

No(N) by pressing the

Retroﬁt button

Press to return

to the previous

screen

AVN S9010/9020 V1 06/15 UK

23 • UK

Return to contents

AVN9010/20 V105.15

Setting up vehicle parameters

For Truckmate to calculate a route suitable for your vehicle it needs to know certain information about the vehicle itself such as its height, weight and width. It is possible to save the settings of 10 diﬀerent trucks. Follow these instructions to enter your vehicles details.

Press the centre of the screen to access the menu, press ‘Conﬁgure’ and then press the ‘Truck’ icon.

Name: Enter the name here (Top left ﬁeld, default name TRUCK 1).

Height: Enter the height of the vehicle here.

Length: Enter the length of the vehicle here.

Weight: Enter the weight of the vehicle here.

Width: Enter the width of the vehicle here.

Weight per axle: Enter the weight per axle of the vehicle here

Truck type:

 Truck: Standard setting for ﬁxed axle vehicles.

 Trailer: Speciﬁc traﬃc rules exist for trucks with trailers. For example, there are roads that are forbidden for vehicles with trailers.

These will be avoided. Choose between: Truck with No trailer, Truck with 1 trailer, Truck with 2 trailers, Truck with 3 or more trailers or semi or tractor with 1 or more trailers.

Load type:

 None (Normal)

 Hazardous: Hazardous goods that are not explosive or harmful for water.

 Explosive and Flammable

 Harmful for water

Tunnel Category

ADR Tunnel Codes:

 Select one of the applicable tunnel codes , by default ‘Normal’ is selected

 The tunnel category codes consist of an individual letter from “A” to “E” this will be indicated by the use of road signs

and or signals. Restrictions will not apply to category “A” tunnels as these are unrestricted and will not require any signage.

B Most restrictive Passage forbidden through tunnels of category B, C, D and E

B1000C Carriage where the total net explosive mass per transport unit exceeds 1000 kg: Passage

forbidden through tunnels of category B, C, D and E; does not exceed 1000 kg: Passage forbidden through tunnels of category C, D and E

B/D Tank carriage: Passage forbidden through tunnels of category B, C, D and E; Other carriage: Passage forbidden through tunnels of category D and E

B/E Tank carriage: Passage forbidden through tunnels of category B, C, D and E; Other carriage: Passage forbidden through tunnels of category E

AVN S9010/9020 V1 06/15 UK

24 • UK

Return to contents

AVN9010/20 V105.15

C Passage forbidden through tunnels of category C, D and E

C5000D Carriage where the total net explosive mass per transport unit exceeds 5000 kg: Passage

forbidden through tunnels of category C, D and E; does not exceed 5000kg: Passage forbidden through tunnels of category D and E

C/D Tank carriage: Passage forbidden through tunnels of category C, D and E; Other carriage: Passage forbidden through tunnels of category D and E

C/E Tank carriage: Passage forbidden through tunnels of category C, D and E; Other carriage: Passage forbidden through tunnels of category E

D Passage forbidden through tunnels of category D and E

D/E Bulk or tank carriage: Passage forbidden through tunnels of category D and E; Other carriage:

Passage forbidden through tunnels of category E

E least restrictive Passage forbidden through tunnels of category E

NORMAL Passage allowed through all tunnels (For UN Nos. 2919 and 3331, see also ADR 8.6.3.1).

For mixed loads choose the MOST restrictive category

Disclaimer

This content gives general guidance only and should not be regarded as a complete or authoritative statement of the law. The user guide will be updated to reﬂect any developments in new legislation or case law.

Setting up vehicle parameters

For Bus & Coach to calculate a route suitable for your vehicle it needs to know certain information about the vehicle itself such as its height, weight and width. It is possible to save the settings of 10 diﬀerent vehicles. Follow these instructions to enter your vehicles details.

Press the centre of the screen to access the menu, press ‘Conﬁgure’ and then press the ‘Bus/Coach’ icon.

Name: Enter the name here.

Height: Enter the height of the vehicle here.

NOTE: Maximum height including any protrusions (roof box, TV antenna etc)

Length: Enter the length of the vehicle here.

Weight: Enter the weight of the vehicle here.

Width: Enter the width of the vehicle here.

Weight per axle: Enter the weight per axle of

the vehicle here

Num of axles: Enter the number of axles here.

AVN S9010/9020 V1 06/15 UK

25 • UK

Return to contents

AVN9010/20 V105.15

Environmental settings or Low Emission Zones (LEZ)

Low Emission Zones (LEZs) are areas or roads where the most polluting vehicles are restricted from entering. This means that vehicles are banned, or in some cases charged, if they enter the LEZ when their emissions are over a set level.

Vehicle emissions are classiﬁed by Euro Standards (1-6) for the vehicles that they aﬀect. In many cases another factor is whether or not the vehicle has a particulate ﬁlter or catalytic converter. Before you travel into a LEZ, you need to ﬁnd out the emissions standard of your vehicle.

All LEZs aﬀect heavy duty goods vehicles (usually over 3.5 tonnes Gross Vehicle Weight (GVW)), and most buses and coaches (usually deﬁned as over 5 tonnes GVW). Some LEZs also aﬀect vans, cars and motorcycles.

Most LEZs operate 24 hours a day, 365 days a year, with some of the Italian LEZs currently the only exceptions to this rule. To enter your environmental setting press on the arrow once in the Environmental setting page press the arrow again to return to the vehicles setting page.

Click on the options to edit the

information

Enter number of passengers carried. Enter fuel type

Enter vehicle

production date in

YYYY-MM format

Select Euro rating

press OK to save

Retroﬁt - switch

between yes (Y) and

No(N) by pressing the

Retroﬁt button

Press to return

to the previous

screen

AVN S9010/9020 V1 06/15 UK

26 • UK

Return to contents

AVN9010/20 V105.15

3. Planning a route

There are several ways to plan a route on Snooper.

3.1 Find by post code

 Press the centre of the screen to access the ‘Navigate to’ menu.

 Press the ‘Find by post code’ icon.

 If you have the European version of Snooper, you will need to select

the ‘Country’ ﬁrst BEFORE typing the postcode. (If the correct country is already displayed, go to the next step). Use the arrow keys on the right of the display to scroll up and down the country options. Select the country with your ﬁnger.

 Press ‘Post code’ and enter the full postcode using the onscreen keyboard.

 Press the ‘OK’ button on the keyboard.

Please Note: The button on the keyboard with no character on it is the ‘Space’ key. UK post codes can be entered with and without a space.

If the following message is displayed ‘Please, input correct postcode’, the postcode has been entered incorrectly. Press OK and retype the postcode.

 Snooper will display a screen showing the postcode and the street

name.

 If you know the house/property number of your destination, press

the button to enter it .

 Once you have entered the house number press the ‘OK’ button.  Alternatively, if you do not have a house or building number, you

can navigate to a point where two roads meet instead.

Press the ‘Intersection’ button and select the road .

NOTE: For Truckmate or Ventura models you can select the vehicle type before the journey is calculated.

 Press the ‘Calculate’ button.

AVN S9010/9020 V1 06/15 UK

27 • UK

Return to contents

AVN9010/20 V105.15

Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to complete your journey.

Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with turn-by-turn instructions.

User advice - By subscribing to and downloading the AURA™

Speed Camera database you

will automatically be alerted to all ‘Fixed’ Speed Cameras and other Accident Hotspots during your journey ensuring that you are always aware of the correct speed limit whilst travelling along any particularly hazardous stretches of road.

3.3 Find by city

If you do not know the postcode but have the street name and the town or city that you would like to navigate to, then select this option.

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the ‘Find by city’ icon.  Select the ‘Country’ ﬁrst BEFORE typing the city. (If the correct country is already

displayed, go to the next step). Use the arrow keys on the right of the display to scroll up and down the country options. Select the country with your ﬁnger.

 Next press ‘City’ and enter the city name using the keyboard displayed.

As you begin to input the city name, Snooper will automatically prompt you with a list of possible matches. If you can see the name of the destination you are searching for in the lower window, you can select it easily by pressing that name with your ﬁnger. If you wish to view the list of possible destinations in full, press the down arrow to the top right hand corner of the display and a list of cities will be displayed then select your destination by touching on it. Use the arrow keys on the right hand side of the display to scroll through the list.

 Press ‘Street’ and use the keyboard displayed to type in the street name.

Note: if there is more than one street with the same name in that city then a list of streets will be displayed along with the post code or district

As you begin to input the road or street name, Snooper will automatically prompt you with a list of possible matches similar to when searching for ‘City’ described above. When you see the road you require select it by pressing it with your ﬁnger.

 If you wish, you can enter the property number by pressing ‘House No.’ and then

typing the house number on the keyboard. Once the house number has been selected, press the ‘OK’ button. Note: Truckmate & Ventura-After the OK button is pressed an additional screen will be displayed where you can choose the relevant vehicle. Press ‘Change’ to edit the vehicle choice or ‘OK’ to to continue.

 Press the ‘Calculate’ button.

Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to complete your journey

Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with turn-by-turn instructions.

AVN S9010/9020 V1 06/15 UK

28 • UK

Return to contents

AVN9010/20 V105.15

3.3.1 Home

You can navigate easily and quickly from a previous journey or destination to your home, by personalising Snooper so that a route can be calculated by pressing just a few buttons.

3.3.2 Setting the ‘Home’ Destination

 Press the centre of the display to enter the ‘Navigate to’ menu.  Press the ‘Home’ icon.

The ﬁrst time the ‘Home’ function is used an information screen is displayed saying ‘Set Home? Press ‘OK’ in the information window to continue, press ‘CANCEL’ to exit. If ‘Home’ has already been set it can be edited in My Favourites – refer to section 4.4 on page 51

.

 You can search for your address by using one of the following options:

‘Find address by city’ or ‘Find address by post code’. Please refer to 3.1 and 3.2 above on how to use these functions.

 Once you have entered the ‘Home’ destination, a new ﬁeld is available for you to ‘Name’ the destination.  Press ‘Name’ and a keyboard will be displayed with the road name you selected.  Press the ‘Arrow ’ key to erase this data then input the new name using the keyboard.

Please note: You can enter a new name for the home destination using up to a maximum of sixteen characters.

 Press ‘Save’ once you have entered the name.  Once your home address has been saved, Snooper will be able to calculate a route to this address.

3.3.3 Using the ‘Home’ Function

 To calculate a route:  Press the centre of the display to enter the ‘Navigate to’ menu.  Press the ‘Home’ icon.

Snooper will display details of the destination and oﬀer a ‘Go’ button and a ‘Route Option’ button. Press ‘Go’ to begin your journey.

AVN S9010/9020 V1 06/15 UK

29 • UK

Return to contents

AVN9010/20 V105.15

3.4 Oﬃce

You can navigate easily and quickly from a previous journey or destination to your oﬃce or place of work, by personalising Snooper so that a route can be calculated by pressing just a few buttons.

3.4.1 Setting the ‘Oﬃce’ Destination

 Press the centre of the display to enter the ‘Navigate to’ menu.  Press the ‘Oﬃce’ icon.

The ﬁrst time the ‘Oﬃce’ function is used an information screen is displayed saying ‘Set Oﬃce? Press ‘OK’ in the information window to continue, press ‘CANCEL’ to exit. If ‘Oﬃce’ has already been set it can be edited in My Favourites – refer to section 4.5 on page 52.

 You can search for your address by using one of the following

options: ‘Find address by city’ or ‘Find address by post code’. Please refer to 3.1 and 3.2 above on how to use these functions.

Once you have entered the ‘Oﬃce’ destination, a new ﬁeld is available for you to ‘Name’ the destination.

 Press ‘Name’ and a keyboard will be displayed with the road name you selected.  Press the ‘Ar ro w ’ key to erase this data then input the new name using the keyboard.

Please note: You can enter a new name for the oﬃce destination using up to a maximum of sixteen characters.

 Press ‘Save’ once you have entered the name.

Once your oﬃce address has been saved, Snooper will be able to calculate a route to this address.

3.4.2 Using the ‘Oﬃce’ Function

To calculate a route: Press the centre of the display to enter the ‘Navigate to’ menu.

 Press the ‘Oﬃce’ icon.

Snooper will display details of the destination and oﬀer a ‘Go’ button and a ‘Route Option’ button. Press ‘Go’ to begin your journey.

3.5 Recent Route or Clear route

Snooper automatically stores the last route that has been calculated, so that if you wish to return to that address you do not have to re-input all the details again.

 To use this function:  Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the ‘Recent Route’ icon.

Snooper will now calculate the route to your selected location.

AVN S9010/9020 V1 06/15 UK

30 • UK

Return to contents

AVN9010/20 V105.15

Once a route has been calculated, the ‘Recent Route’ icon is replaced with a ‘Clear Route’ icon. To cancel a route that you have calculated:

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the ‘Clear Route’ icon.

The route will then automatically be deleted.

Please Note: For the ‘Clear Route’ feature to operate you will need to have entered and calculated a route. If the ‘Recent Route’ icon is displayed a route has NOT been entered.

3.6 Multi route

With Snooper you have the facility to enter more than one destination at a time (for instance if you wish to visit other locations before reaching your ultimate destination). You can store up to seven multi-routes, with up to sixteen destinations within each multiroute. The unit will process and calculate the destinations in the following order: A to B, B to C, and C to D etc. When entering the destinations you are able to review the routes and change the order of the routes before pressing ‘Go’.

3.6.1 Create a Multi-route

 Press the centre of the display to enter the ‘Navigate to’ menu.  Press the ‘Multi-route’ icon.

You will then see the ‘Multi-route screen’ that allows you to:

 Create a multi-route  Use or edit a previously stored multi-route  Delete a multi-route.

 Press ‘Create multi-route’.

A screen is displayed where you can: > ‘Edit name’ the name of the multi-route > ‘Change Start’ the start point of the multi-route > ‘Ad d ’ your destinations. > ‘S ave’ your destinations > ‘Calculate’ your multi-route

 Press ‘Edit Name’ to create a name for your new multi-route.

Please note: You can enter a new name for the multi-route using up to a maximum of sixteen characters.

 Press the ‘Ar ro w ’ key to delete the current name for your multi-

route.

 Type the new name of your multi-route using the keyboard.  Press the ‘Save’ button in the top right hand corner.

If you wish to change the start position of the multi-route, press ‘Change Start’ to change it. You are provided with several options to select your start position. To ﬁnd out how to use these options please refer to the applicable sections earlier in this user manual.

AVN S9010/9020 V1 06/15 UK

31 • UK

Return to contents

AVN9010/20 V105.15

If you are happy with the start position, you can now begin to enter the data of your ﬁrst destination. If you want to change the start position, press ‘Change Start’. You can then select how you want to ﬁnd your start position

 Press ‘Add ’ – you are provided with several options to ﬁnd your

destination stage: > Find address by city > Find address by post code > Find by POI > Find by recently used > Find by favourites

To ﬁnd out how to use these options please refer to the applicable sections in this user manual.

 Once you have entered the data press ‘Set’.  The destination stage will now appear in the multi-route screen.  Press ‘’Add ’ to enter additional destination stages.  Once you have entered all your destination stages press ‘Save’.

3.6.2 Editing a Multi-route

If you wish to change the order or delete any of the stages in the multiroute:

 Press the centre of the display to enter the ‘Navigate to’ menu.  Press the ‘Multi-route’ icon.  Press the name of the multi-route destination you wish to edit  Press one of the stages listed and some new options will appear near the bottom of the display.

1. Deletes selected destination

2. Changes destination. Choose between ﬁnal destination and stops .

3. Move selected destination up

4. Move selected destination down

5. Route options, change the route option for that section of the journey (See section 6.0 for route options)

Note: These functions only apply to the stage that you have selected. To edit the other stages in the list press the ‘Return Arrow’ in the bottom right hand corner of the screen and select the new stage.

Once you have made your desired changes press ‘Save’.

1 2 3 4 5

AVN S9010/9020 V1 06/15 UK

32 • UK

Return to contents

AVN9010/20 V105.15

3.6.3 Using the Multi-route function

To use a saved multi-route:

 Press the centre of the screen to enter the ‘Navigate to’ menu  Press the ‘Multi-route’ icon.  Press the name of the multi-route destination you wish to use  Press ‘Calculate’.

Snooper will calculate the route to each destination stage and provide a new summary screen with the distance to each destination stage along with the estimated duration of the journey to each destination stage from the start point.

 If you wish to view the calculated route on a map, press ‘Map’.  If you wish to start using the Multi-route, press ‘G o ’.

Please Note: If you press one of the stages listed before pressing ‘G o ’, you will see a summary screen where you can either press ‘Go’

to start navigation, ‘Simulation’ to see the actual route that will be taken or ‘Guide’ which will list the turn by turn instructions for that stage of the journey. The ‘Summary Screen’ will also display the distance to your destination, estimated time of arrival and the estimated time it will take to complete that stage of the journey.

Once you have pressed ‘Go’ Snooper will now display your current map position along with a small summary screen located in the bottom right hand corner. The following information is displayed on the summary screen:

If, during the journey, you wish to cancel the current stage and begin travelling to the next stage in your multi-route journey press the summary screen in the bottom right hand corner of the display and the message ‘Delete current stage?’ will be displayed. Press ‘OK’ and the unit will calculate your route to the next stage in the multi-route from your current position.

Note: If Snooper is turned ‘OFF’ and then ‘ON’ during a multi-route journey the device will retain the current route and ask you if you wish to continue with the current destination or with the next stage of the destination or to cancel the multi-route.

Estimated time of arrival at the

end of multi-route journey.

Stage 1/4 - indicates this is the ﬁrst destination of the journey

Total distance of

multi-route journey

Estimated time of arrival

to ﬁrst destination.

Distance to ﬁrst

destination

AVN S9010/9020 V1 06/15 UK

33 • UK

Return to contents

AVN9010/20 V105.15

3.6.4 Auto arrange Multi-route

Once you create a multi-route Snooper can arrange the multi-route into a logical order by pressing the

icon

Before

After

1. Add an additional destination to Multi-route

2. Save the Multi-route without making any further changes.

3. Rearrange the multi-route into the most eﬃcient/logical order

(based on route options and vehicle parameters)

4. OK - greyed out if no changes have been made

5. Return to previous screen

Once the route has been arranged press the

icon then OK. Press

Snooper will now calculate the multi-routes estimated time and distances

Then displays the route summary

Use the up and down arrows to view

additional stops or the ﬁnal destination.

Press

to continue or to display the route on a

map.

Use the + and - buttons to zoom in and out of the map view. You can also ‘drag’ the map using your ﬁnger on the touch screen

1 2 3 4 5

AVN S9010/9020 V1 06/15 UK

34 • UK

Return to contents

AVN9010/20 V105.15

3.7 Find by favourites

Snooper has the capacity to store up to 150 user locations. To add your favourite locations see Section 4.1.1 on page 50.

To navigate to one of your stored locations:

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the ‘Find by favourites’ icon.  Select the favourite you wish to navigate to from the list provided.

The information about your chosen favourite is displayed.

 To start the journey press ‘Calculate’  To change the route parameters press ‘Route Option’ (see Section 6.0: Route Options on page 72 for speciﬁc instructions).  To view the location of the favourite, press ‘Map’.  To return to the previous page press the return arrow

located in the bottom right hand corner of the display.

Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to complete your journey.

Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with turn-by-turn instructions.

Press

to move to the next screen

3.8 Recent destination

Snooper is capable of storing the last 40 routes that have been calculated, so that if you wish to return to an address you do not have to re-input the details again.

To calculate a route using the ‘Recent destination’ function:

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the black arrow

once.

 Press the ‘Recent destination’ icon.  Select the recent route you wish to navigate to from the list provided*.

*A list of your most recent routes will be shown in chronological order. Use the arrows on the right hand side of the display to scroll up and down through the list and select the destination you would like.

To start the journey press ‘Calculate’

 To change the route parameters press ‘Route Option’ (see Section 6.0: Route Options on page 72 for speciﬁc instructions).  To view the location of the recent destination, press ‘Map’.  To return to the previous page press the return arrow

located on the bottom right hand corner of the display.

Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to complete your journey.

Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with turn-by-turn instructions.

AVN S9010/9020 V1 06/15 UK

35 • UK

Return to contents

AVN9010/20 V105.15

3.9 Find by POI (points of interest)

If you would like to calculate a route to a hotel, airport, restaurant or even a golf course Snooper can calculate a route using its extensive database of POI’s (Points of Interest).

To navigate using this database:

 Press the centre of the screen to access the ‘Navigate to’ menu.  Press the black arrow

once.

 Press the ‘Find by POI’ icon.  Press ‘Country’ and select the country where you would like to ﬁnd the

POI. (If the country is already displayed, go to the next step). Use the arrow keys on the right to scroll up and down the options.

 Next press ‘City’ and enter the city name using the keyboard displayed.

As you begin to input the city name, Snooper will automatically prompt you with a list of possible matches. If you can see the name of the destination you are searching for in the lower window, select it by pressing that name with your ﬁnger. If you wish to view the list of possible destinations in full, press the down arrow to the top right hand corner of the display and a list will be displayed then, select your destination. Use the arrow keys on the right hand side of the display to scroll through the list.

 Press ‘Category’ and enter the category type using the keyboard displayed.

If you do not know which category to type you can press the down arrow to the right of the lower window and all the category types will be displayed in alphabetical order. Use the arrows to the right of the display to scroll up and down through the category options. Once you ﬁnd the category you are looking for select it with your ﬁnger.

 Press ‘Name’. If the name of your POI is displayed in the lower window

select it with your ﬁnger. Alternatively you can start typing the name to narrow the options and then select it.

All the ﬁelds are now ﬁlled in for your chosen POI.

 To start the journey press ‘Calculate’  To view the location of the POI, press ‘Map’.  To change the route parameters press ‘Route Option’ (see Section 6.0:

Route Options on page 72 for speciﬁc instructions).

 Press ‘Information’ to see more details about the POI.  To return to the previous page press the return arrow

located on the

bottom right hand corner of the display.

Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to complete your journey.

Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with turn-by-turn instructions.

AVN S9010/9020 V1 06/15 UK

36 • UK

Return to contents

AVN9010/20 V105.15

3.10 Find by nearest POI

This function will help you to ﬁnd the nearest POI from either your ‘Current Position’ or a ‘Diﬀerent Position’ within a certain radius which can be speciﬁed

up to a maximum of 60 miles.

3.10.1 To navigate using the ‘Current Position’

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the black arrow

once.

 Press the ‘Find by nearest POI’ icon.  Select ‘Current Position’  Select the maximum radius you wish the unit to search for (the default setting is

30 miles) and then press ‘OK’

 Press ‘Category’ and enter the category type using the keyboard displayed.

If you do not know which category to type, you can press the down arrow to the right of the lower window and all the category types will be displayed in alphabetical order. Use the arrows to the right of the display to scroll up and down through the category options. Once you ﬁnd the category you are looking for select it with your ﬁnger.

A list of POI’s within the speciﬁed radius and category will be displayed. Use the arrows on the right hand side of the screen to scroll up and down through the options. When you ﬁnd the POI that you are looking for, select it with your ﬁnger

 To start the journey press ‘Calculate’  To view the location of the POI, press ‘Map’.  To change the route parameters press ‘Route Option’ (see Section 6.0: Route Options

on page 72 for speciﬁc instructions).

 To return to the previous page press the return arrow

located on the bottom

right hand corner of the display.

Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to complete your journey.

Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with turn-by-turn instructions.

AVN S9010/9020 V1 06/15 UK

37 • UK

Return to contents

AVN9010/20 V105.15

3.10.2 To navigate using a ‘Diﬀerent Position’

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the black arrow

once.

 Press the ‘Find by nearest POI’ icon.  Select ‘Diﬀerent Position’  Press ‘Country’ and select the country where you would like to ﬁnd the POI. (If the

country is already displayed, go to the next step). Use the arrow keys on the right to scroll up and down the options.

 Next press ‘City’ and enter the city name using the keyboard displayed.

As you begin to input the city name, Snooper will automatically prompt you with a list of possible matches. If you can see the name of the destination you are searching for in the lower window, you can select it easily by selecting that name. If you wish to view the list of possible destinations in full, press the down arrow to the top right hand corner of the display and a list of cities will be displayed then select your destination. Use the arrow keys on the right hand side of the display to scroll through the list.

 Press ‘Street’ and use the keyboard displayed to type in the street name.

As you begin to input the road or street name, Snooper will automatically prompt you with a list of possible matches similar to when searching for ‘City’ described above. When you see the road you require select it.

Once all ﬁelds have been completed you can view the new position by pressing ‘Map’ at the bottom of the screen.

 Press ‘Set’  Select the maximum radius you wish the unit to search for (the default setting is 30

miles) and then press ‘OK’

 Press ‘Category’ and enter the category type using the keyboard displayed.

If you do not know which category to type, you can press the down arrow to the right of the lower window and all the category types will be displayed in alphabetical order. Use the arrows to the right of the display to scroll up and down through the category options. Once you ﬁnd the category you are looking for select it.

A list of POI’s within the speciﬁed radius and category will be displayed. Use the arrows to the right hand side of the screen to scroll up and down through the options. When you ﬁnd the POI that you are looking for, select it.

 To start the journey press ‘Calculate’  To view the location of the POI, press ‘Map’.  To change the route parameters press ‘Route Option’ (see Section 6: Route Options

on page 72 for speciﬁc instructions).

 To return to the previous page press the return arrow

located on the bottom

right hand corner of the display.

AVN S9010/9020 V1 06/15 UK

38 • UK

Return to contents

AVN9010/20 V105.15

Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to complete your journey.

Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with turn-by-turn instructions.

3.10.3 To navigate using ‘Along Route’ (see section 3.11.4 for details)

Choose to search from our extensive list of Point’s of Interest using our new ‘Corridor Search’ facility. The ‘Corridor Search’ search function enables you to search speciﬁcally along your pre-programmed route.

The instructions to use this facility are the same as above (see Section 3.10.2) but select ‘Along Route’ to open the search.

3.11 User POI

The Snooper comes pre loaded with a number of ‘User POI’s’. You can add additional POI (Points Of Interest) by downloading them to the device via a PC. The User POI Updater program can be downloaded from: https://www.snooperneo.co.uk/Software.cfm. Once the program is installed it will be possible to select additional POI lists for the Snooper.

To navigate using User POI:

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the black arrow

once.

 Press the User POI’ icon.  A list of installed User POI’s will appear, select the one you want to navigate to by

pressing the name.

 The option to:

Find around current position Find around diﬀerent position will be displayed.

3.11.1 Find by name

 If you know the name of the POI you are looking for select ‘Find by name’ and then type the name of the POI.

Press

to reveal more locations

To return to the search screen press the keyboard icon

AVN S9010/9020 V1 06/15 UK

39 • UK

Return to contents

AVN9010/20 V105.15

Select the POI with your ﬁnger; an information screen will be displayed. Press ‘OK’ if the POI is correct, press ‘Map’ to view the POI location on the map, press ‘Route options’ to change start position or press

to return to the previous screen.

Press ‘Calculate’ and a journey summary screen will be displayed. Press ‘GO’ to start navigation.

3.11.2 Find around current position

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the black arrow

once.

 Press the ‘User POI’ icon.  Press the POI you wish to look for  Select ‘Find around current position’  Select the maximum radius you wish the unit to search for (the default setting is 30

miles) and then press ‘OK’

A list of POI’s within the speciﬁed radius and category will be displayed. Use the arrows to the right hand side of the screen to scroll up and down through the options. When you ﬁnd the POI that you are looking for, select it.

 To start the journey press ‘OK’ followed by ‘Calculate’  To view the location of the POI, press ‘Map’.  To change the route parameters press ‘Route Option’ (see Section 6: Route Options

on page 72 for speciﬁc instructions).

 To return to the previous page press the return arrow

located on the bottom

right hand corner of the display.

Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to complete your journey.

Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with turn-by-turn instructions.

AVN S9010/9020 V1 06/15 UK

40 • UK

Return to contents

AVN9010/20 V105.15

3.11.3 Find around diﬀerent position

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the black arrow

once.

 Press the ‘User POI’ icon.  Press the POI you wish to look for  Select ‘Find around diﬀerent position’  Press ‘Country’ and select the country where you would like to ﬁnd the POI. (If the

country is already displayed, go to the next step). Use the arrow keys on the right to scroll up and down the options.

 Next press ‘City’ and enter the city name using the keyboard displayed.

As you begin to input the city name, Snooper will automatically prompt you with a list of possible matches. If you can see the name of the destination you are searching for in the lower window, you can select it easily by selecting that name. If you wish to view the list of possible destinations in full press the down arrow to the top right hand corner of the display and a list of cities will be displayed then select your destination. Use the arrow keys on the right hand side of the display to scroll through the list.

 Press ‘Street’ and use the keyboard displayed to type in the street name.

As you begin to input the road or street name, Snooper will automatically prompt you with a list of possible matches similar to when searching for ‘City’ described above. When you see the road you require select it.

Once all ﬁelds have been completed you can view the new position by pressing ‘Map’ at the bottom of the screen.

 Press ‘Set’  Select the maximum radius you wish the unit to search for (the default setting is 30

miles) and then press ‘ O K ’.

A list of POI’s within the speciﬁed radius and category will be displayed. Use the arrows to the right hand side of the screen to scroll up and down through the options. When you ﬁnd the POI that you are looking for, select it.

 To start the journey press ‘OK’ followed by ‘Calculate’.  To view the location of the POI, press ‘Map’.  To change the route parameters press ‘Route Option’ (see Section 6: Route Options

on page 72 for speciﬁc instructions).

 To return to the previous page press the return arrow

located on the bottom right hand corner of the display.

AVN S9010/9020 V1 06/15 UK

41 • UK

Return to contents

AVN9010/20 V105.15

Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to complete your journey.

Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with turn-by-turn instructions.

3.11.4 Along Route

This function allows you to select a POI along your current route.

NOTE: For this feature to work you must have a route plotted if not, the button does not function. Firstly, plot a route by any of the methods previously described in this user guide.

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the black arrow

once.

 Press the ‘User POI’ icon.  Press the POI you wish to look for.  Select ‘Along Route’.  Choose the POI from the list.

An information screen will be displayed.

 Press OK to accept or choose ‘Route Options’ or ‘Map’. Press the return button

in the bottom left of the screen to return to the list.

 When ‘OK’ is pressed choose ‘Calculate’

Once all ﬁelds have been completed you can view the new position by pressing ‘Map’ at the bottom of the screen.

 To start the journey press ‘OK’ followed by ‘Calculate’.  To view the location of the POI, press ‘Map’.  To change the route parameters press ‘Route Option’ (see Section 6: Route Options

on page 72 for speciﬁc instructions).

 To return to the previous page press the return arrow

located on the bottom

right hand corner of the display.

AVN S9010/9020 V1 06/15 UK

42 • UK

Return to contents

AVN9010/20 V105.15

3.12

Find by map

This function allows you to select a destination by simply selecting any road on any area of the map stored within your unit or alternately you can navigate to motorway junction numbers.

To navigate using this facility:

 Press the centre of the screen to access the ‘Navigate to’ menu.  Press the black arrow

once.

 Press the ‘Find by map’ icon.

The screen will show a section of the map (usually of your current position with a road selected in red).

 To see a larger section of the map press the

button to zoom out.

 If you would like to see the map in more detail, use the button to zoom in.  By pressing and moving your ﬁnger on the screen you can move the map around until

you ﬁnd your desired location.

 When you can see the required destination, simply press on the road of the map you would like to navigate to and the road name

selected will be displayed at the bottom of the screen.

 Press ‘Quick Menu’ and then press ‘Continue’.  To start the journey press ‘Calculate’.  To view the location of the POI, press ‘Map’.  To change the route parameters press ‘Route Option’ (see Section 6: Route Options on page 72 for speciﬁc instructions).  To return to the previous page press the return arrow

located on the bottom right hand corner of the display.

Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to complete your journey.

Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with turn-by-turn instructions.

AVN S9010/9020 V1 06/15 UK

43 • UK

Return to contents

AVN9010/20 V105.15

3.13 Find by coordinate

To navigate to a location using a coordinate:

 Press the centre of the screen to access the ‘Navigate to’ menu.  Press the black arrow

once.

 Press the ‘Find by coordinate’ icon.

Enter the coordinate using the key pad and press the ‘OK ’ button.

You can enter the coordinate in three diﬀerent formats. For example.

Decimal Degrees (DD.ddddd°)

Latitude (N): 53.34878° Longitude (W): -2.68214°

Please note: when inputting the Longitude you ignore the minus symbol (-) . The degree symbol MUST be used in order for this function to work (see image on the right).

Degrees, Minutes, Seconds (DD°MM’SS.s”)

Latitude (N): 53°20’55.6”N Longitude (W): 2°40’55.71”W

Please note: when inputting the Longitude and Latitude you ignore the letters ‘N’ and ‘W’ . You MUST use the degrees, minutes and seconds symbols when using this function (see image on the right).

Degrees, Minutes (DD°MM.mmm’)

Latitude (N): N 53 20.927 Longitude (W): W 2 40.928

Please note: when inputting the Longitude and Latitude you ignore the letters ‘N’ and ‘W’. The degree and minute symbols MUST be used when using this function (see image on the right).

After pressing OK, the location of the coordinates will be shown on the map. If correct press ‘Quick menu’ and then ‘Continue’ and follow the on screen instructions to calculate a route.

Easting and northing are geographic Cartesian coordinates. Press the EN button to enter Easting and Northing co-ordinates

AVN S9010/9020 V1 06/15 UK

44 • UK

Return to contents

AVN9010/20 V105.15

3.14 Re-route

Snooper can recalculate your route by avoiding certain roads or redirecting you by distance. This facility only becomes available once you have calculated a route.

To perform a re-route:

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the black arrow

once.

 Press the ‘Re-route’ icon.

You can then choose how you would like to re-route your journey from the selections shown on the display.

In order to use this function on Snooper you will need to have entered and calculated a route. If the ‘Re-Route’ icon is greyed out a route has NOT been entered.

3.14.1 Avoid By Road Name

If you know the road name or road number you wish to avoid, then select this option.

 Press ‘Avoid by Road Name’.

You will be provided with the turn by turn instructions of the route that you are currently following. If the road you are looking for is not visible, press the down arrow on the right hand side of the display to see further turn by turn instructions.

 Once you have found the road that you wish to avoid, select it.  The route will be recalculated and a information screen will be displayed.  The original route is shown in Red and the new route is shown in Yellow. To choose either route press the corresponding text at

the bottom of the screen, alternatively press the return arrow (bottom left) to go back to the ‘Re-Route’ menu.

Once you select which route you wish to use, the device will automatically start to navigate. The summary screen with simulation will not be displayed .

Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with turn-by-turn instructions.

3.14.2 Avoid by Range

If you wish to avoid several roads from the selected route calculated by Snooper, then this function allows you to re-calculate a route over a user deﬁned distance, ranging from 1 mile up to a maximum of 100 miles.

To use this function:

 Press the ‘Avoid by range’ button - the ‘Select avoided range’ page will be displayed.  Select the distance of the range you wish to avoid using your ﬁnger.

If you wish to view more range distances then press the down arrow on the right hand side of the display. Once you have selected the range you wish to avoid, Snooper will automatically re-calculate your route.

The methodology for using Avoid by Range is the same as Avoid by Road Name in section 3.1.4.1

AVN S9010/9020 V1 06/15 UK

45 • UK

Return to contents

AVN9010/20 V105.15

3.14.3 Avoid by TMC - AVN S9020 ONLY

If you wish to avoid incidents and/or hold ups which have been received via TMC then you can use this option. Refer to section 3.7 for further details of TMC

To use this function:

 Press the ‘Avoid by TMC’ button - the TMC information page will be displayed, choose TMC on Route.  Select the incident you wish to avoid.

The methodology for using Avoid by Range is the same as Avoid by Road Name in section 3.1.4.1

3.14.4 Clear Avoided Road

If you do not wish to use the alternative routes oﬀered by Snooper and you wish to return to the original calculated route, press the ‘Clear Avoided Road’ button and the original route plotted by Snooper will be restored.

Once the re-calculation of the original route is complete the summary screen is displayed. Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to complete your journey.

Please Note: If you have already travelled some of the re-calculated route, Snooper may produce a slightly diﬀerent route from what was originally plotted. The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with turn-by-turn instructions. If the ‘Avoid by Road’ and ‘Avoid by Range’ have not been used, this feature is unavailable and the button will be greyed out

.

AVN S9010/9020 V1 06/15 UK

46 • UK

Return to contents

AVN9010/20 V105.15

3.15 Your route

Create and save your own bespoke routes. Use the map view to select the roads you would like to travel on or search road by road. Use ‘Your route’ to build your own personal, tailored routes. To use this facility:

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the black arrow

twice.

 Press ‘Your route’.

3.15.1 Creating a route.

1. Press ‘Create’ - the screen will display your current location, illustrated by a ‘push pin’.

2. If you wish to use this as your start position press the

or to change the start position press the button. You can now

search by Country, City & Street.

3. Press ‘Map’ to continue or the button to return to the previous screen.

4. To add the location as the start position press the

button a will appear on the map to indicate the start position.

5. To add additional roads or the journey end either select another road in the current map view, zoom out using the then scroll the map or press the button to search by Country, City & Street. Once the correct road has been highlighted press

as each link in the route is added a will appear on the map.

To remove a link press the button.

AVN S9010/9020 V1 06/15 UK

47 • UK

Return to contents

AVN9010/20 V105.15

To calculate a route which is appropriate for your vehicle, once a second link has been added the following screen will be displayed:

If this is the correct vehicle press ‘Calculate’ or if you need to change the vehicle press ‘Change’.

6. Continue adding roads to ‘Your route’ until you have constructed your desired routing. For accurate routing select small ‘links’.

7. Once the journey has been built press ‘Done’. A summary of the journey is displayed and you now have the option to ‘Save’ (by

pressing the ‘Save’ button) or start navigating by pressing ‘GO’ .

8. If you choose to save your route you can now change the name of your route. Once the name has been edited press ‘Save’.

9. Additional ‘My Routes’ can be created, saved and added by following steps #1-9

3.15.2 Navigating using My route

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the black arrow

twice.

 Press ‘Your route’.  Select which My Route you want to use by pressing on the name; a summary screen will appear. To start navigating press ‘Go’.

AVN S9010/9020 V1 06/15 UK

48 • UK

Return to contents

AVN9010/20 V105.15

3.16 Route Description

After a route has been calculated and the journey has commenced, you can access the summary display again by using this function.

To view the summary screen:

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the black arrow

twice.

 Press the ‘Route description’ icon.

In order to use this function on Snooper you will need to have entered and calculated a route. If the ‘Route description’ icon is greyed out a route has NOT been entered.

From the summary display you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to

complete your journey.

The summary screen is only displayed for approximately 10 seconds before the unit automatically returns to providing you with turn-by-turn instructions.

3.17 TMC (Traﬃc Message Channel) - AVN S9020 ONLY

TMC Options

The type of alerts you receive whilst using TMC can be edited in the conﬁguration menu of Snooper. To access the menu press the centre of the display, then press

then twice and then

.

The following options are displayed:

The options can be deselected by pressing the

– the box will be displayed with the red tick removed . To ﬁnalize your

selection press

TMC Icon

Once the unit starts to receive TMC alerts one of the two following icons will appear on the main screen:

This icon appears if Snooper has received TMC information but the delay or incident is not on your route.

This icon appears if the Snooper has received TMC information and the delay or incident aﬀects your plotted route.

Using the ‘down

arrow’ will reveal

more options

AVN S9010/9020 V1 06/15 UK

49 • UK

Return to contents

AVN9010/20 V105.15

To show the TMC incident press the

icon and the following screen is displayed:

To show TMC events which are NOT on your route press

To see a more detailed description press the TMC warning:

To avoid the incident press

Snooper will now calculate an alternative route.

To view the incident press

To return to the previous screen press

If you want to return to the original route (not avoiding the incident) then press the TMC Icon select the TMC alert you

originally wanted to avoid and then press

Snooper will recalculate the original route.

Note: TMC data is transmitted simultaneously by commercial FM radio stations - the reception of TMC data can be aﬀected by geographical and environmental conditions.

Distance from your

current location to the

incident

Icon which will appear

on map

Direction of event Road Number Road Name

Type of event

Refresh

Scroll

AVN S9010/9020 V1 06/15 UK

50 • UK

Return to contents

AVN9010/20 V105.15

3.18 Campsite Search (Ventura ONLY)

Ventura can search from over 20,000 caravan and motor home sites and rest stops. This unique, content rich, data is supplied by some of the biggest camping organizations in Europe: ASCI , BordAtlas and Camperstop (by Facile en Route).

Advanced campsite search

Ventura can search campsites and camper stops based on diﬀerent criteria:

3.18.1 Find by name

If you know the name of the site you are looking for you can select ‘Find by name’.

 Enter the country and the city, if the city is not known select ‘Al l ’.  Press ‘Search’.  Type in the name of the campsite/camperstop, once you start to enter the name

a list of possible matches will be displayed. To expand the list press the select the campsite/camperstop by pressing on the name.

A summary screen is now displayed listing the campsite/camperstop contact details and general information including any facilities and/or restrictions they may have (the example shown to the right is from the ACSI data).

You now have the option to:

 View a photograph (where available).  Save, this will save the campsite/camper stop to your favourites, see section 4.0 Favourites for details.  Route this will commence the navigation to the selected campsite/camper stop.

If you do not know the name of the campsite/camper stop you can search for a suitable location by using either ‘Find around current position’ or ‘Find around

diﬀerent position’.

3.18.2 Find around current position

Ventura can search for a suitable location based on the following:

 Distance from your current position - selectable.  Campsite facilities.

AVN S9010/9020 V1 06/15 UK

51 • UK

Return to contents

AVN9010/20 V105.15

You can select as many or as few options as you require to narrow or expand the search.

 Press OK to continue.  Press ‘Review facilities selected’ to show a summary of the facilities chosen. If required, you can remove some of the facilities.  On this screen you can edit the selected facilities.  Select OK to continue.  A list of campsites/ camper stops will be displayed - press on the ‘destination’ to continue.

A summary screen is now displayed listing the campsite/camper stop contact details and general information including any facilities and/or restrictions they may have (the example shown to the right is from the ACSI data).

You now have the option to:

 View a photograph (where available).  Save, this will save the campsite/camper stop to your favourites, see section 4.0

Favourites for details.

 Route this will commence the navigation to the selected campsite/camper stop.

3.18.3 Find around diﬀerent position

It is possible for Ventura to search for campsites/camper stops in a diﬀerent location, this allows you to plan ahead. The instructions are similar to ‘3.18.2 Find around current position’ with the exception that there is an additional step to determine the area of the search.

 Press ‘Find around diﬀerent position’.  Either search by ‘All countries’ or press ‘Country’ to enter the country details.  Press ‘City’ to enter the city details or press ‘Al l ’ to search all cities.  Press ‘Map’ to search using the map or press ‘Set’ to continue.

Use the arrows to scroll through the list.

AVN S9010/9020 V1 06/15 UK

52 • UK

Return to contents

AVN9010/20 V105.15

4. My Favourite

The ‘My Favourite’ menu allows you to store destinations that you visit frequently, retrieve recently visited destinations, modify user points and edit or store your ‘Home’ and ‘Oﬃce’ details without having to enter the destination details each time.

4.1 Favourites

This function allows you to store a number of your more common destinations. You can store up to a maximum of 150 diﬀerent destinations.

4.1.1 Add a favourite destination

 Press the centre of the screen to access the ‘Navigate to’ menu.  Press ‘My Favourite’ at the top of the display.  Press the ‘Favourites’ icon.  Press ‘Add ’.

You can now search for the destination using the following options displayed:

 Find address by city  Find address by post code  Find by POI  Find by recently used  Save using current point

To ﬁnd out how to use these options please refer to the applicable sections in this user manual.

Once you have entered your destination details you also have the facility to name your destination to make it easier to ﬁnd.

 Press ‘Name’ and a keyboard will be displayed with the road name of the

destination you selected.

 Press the

key to erase this data then input the new name using the keyboard.

 Press ‘Save’ once you have entered the name.

Please note: You can enter a new name for the favourite using up to a maximum of sixteen characters.

4.1.2 Using a favourite destination

 Press the centre of the screen to access the ‘Navigate to’ menu.  Press the ‘Find by favourites’ icon.  Select the favourite destination you wish to use.

AVN S9010/9020 V1 06/15 UK

53 • UK

Return to contents

AVN9010/20 V105.15

4.1.3 Editing/Deleting a Favourite

 Press the centre of the screen to access the ‘Navigate to’ menu.  Press ‘My Favourite’ at the top of the display.  Press the ‘Favourites’ icon.  Select the favourite destination you wish to edit/delete.

4.1.4 To delete ALL favourites

 Press the centre of the screen to access the ‘Navigate to’ menu.  Press ‘My Favourite’ at the top of the display.  Press the ‘Favourite’ icon.  Press the ‘Delete All’ button – an information box will be displayed with

‘Delete All?’ and the options of ‘OK’ and ‘Cancel’.

 Press the ‘OK’ button and ALL the favourites will be deleted.

4.2 Recent destination

This function can be used to delete any or all of the recent destinations that are stored on Snooper. Snooper can store up to a maximum of 40 recent destinations.

4.2.1 To delete individually stored recent destinations

 Press the centre of the screen to access the ‘Navigate to’ menu.  Press ‘My Favourite’ at the top of the display.  Press the ‘Recent Destination’ icon.  Select the recent destination you wish to delete.

You can scroll through the list of recent destinations using the up, down arrows located on the right hand side of the display, and select the destination you wish to delete with your ﬁnger.

The information relating to that destination is displayed.

 Press the ‘Delete’ button at the bottom of the display.

If the destination selected is not the one you wish to delete you can press the

arrow located in the bottom right hand corner of

the display to go back to the list and reselect the correct destination for deletion.

4.2.2 To delete ALL stored recent destinations

 Press the centre of the screen to access the ‘Navigate to’ menu.  Press ‘My Favourite’ at the top of the display.  Press the ‘Recent destination’ icon.  Press the ‘Delete All’ button – an information box will be displayed with

‘Delete All?’ and the options of ‘OK’ and ‘Cancel’.

 Press the ‘OK’ button and ALL the recent destinations will be deleted.

AVN S9010/9020 V1 06/15 UK

54 • UK

Return to contents

AVN9010/20 V105.15

4.4 Home

To set up and use this function was explained in Section 3.3 earlier in the manual. When this function is accessed from the ‘My Favourite’ menu, you are able to change the ‘Home’ location (for example if you move house) or to delete the ‘Home’ location.

4.4.1 To change the home location

 Press the centre of the screen to access the ‘Navigate to’ menu.  Press ‘My Favourite’ at the top of the display.  Press the ‘Home’ icon.  Press the ‘Change’ button.

You can now search for the new ‘Home’ location using the following options displayed:

 Find address by city  Find address by post code  Find by POI  Find by recently used  Save using current point

To ﬁnd out how to use these options please refer to the applicable sections in this user manual.

Once you have entered your ‘Home’ location details you also have the facility to name your destination.

 Press ‘Name’ and a keyboard will be displayed with the road name of the destination you selected.  Press the ‘Arrow’ key to erase this data then input the new name using the keyboard.  Press ‘Save’ once you have entered the name.

Please note: You can enter a new name for the favourite using up to a maximum of sixteen characters.

4.4.2 To delete the home location

 Press the centre of the screen to access the ‘Navigate to’ menu.  Press ‘My Favourite’ at the top of the display.  Press the ‘Home’ icon.  Press the ‘Delete’ button – an information box will be displayed with

‘Delete home?’ and the options of ‘OK’ and ‘Cancel’.

 Press the ‘OK’ button and the ‘Home’ location will be deleted.

AVN S9010/9020 V1 06/15 UK

55 • UK

Return to contents

AVN9010/20 V105.15

4.5 Oﬃce

To set up and use this function was explained in Section 3.4 earlier in the manual. When this function is accessed from the ‘My Favourite’ menu, you are able to change the ‘Oﬃ ce’ location (for example if you move house) or to delete the ‘Oﬃce’ location.

4.5.1 To change the oﬃce location

 Press the centre of the screen to access the ‘Navigate to’ menu.  Press ‘My Favourite’ at the top of the display.  Press the ‘Oﬃ ce’ icon.  Press the ‘Change’ button.

You can now search for the new ‘Oﬃce’ location using the following options displayed:

 Find address by city  Find address by post code  Find by POI  Find by recently used  Save using current point

To ﬁnd out how to use these options please refer to the applicable sections in this user manual.

 Once you have entered your ‘Oﬃce’ location details you also have the facility to name your destination.  Press ‘Name’ and a keyboard will be displayed with the road name of the destination you selected.  Press the ‘Arrow’ key to erase this data then input the new name using the keyboard.  Press ‘Save’ once you have entered the name.

Please note: You can enter a new name for the favourite using up to a maximum of sixteen characters.

4.5.2 To delete the oﬃce location

 Press the centre of the screen to access the ‘Navigate to’ menu.  Press ‘My Favourite’ at the top of the display.  Press the ‘Oﬃ ce’ icon.  Press the ‘Delete’ button – an information box will be displayed with ‘Delete

Oﬃce?’ and the options of ‘OK’ and ‘Cancel’.

 Press the ‘OK’ button and the ‘Oﬃce’ location will be deleted.

4.6 Advanced - Setting your Home or Oﬃce address using ‘Save using current point’

It is also possible to create a ‘Home’ and ‘O ﬃce’ location using your current coordinates if you are situated at your home or oﬃce whilst setting up your unit.

 Press the centre of the screen to access the ‘Navigate to’ menu.  Press ‘My Favourite’ at the top of the display.  Press the ‘Home’ or ‘Oﬃce’ icon.  Press the ‘Change’ button.  Press ‘Save using current point’.

A map will displayed with a road highlighted in red closest to your current position. The name of the road selected will be displayed at the bottom of the display. If this is not correct, select the correct road with your ﬁnger.

AVN S9010/9020 V1 06/15 UK

56 • UK

Return to contents

AVN9010/20 V105.15

 Press ‘Quick Menu’ and ‘Continue’.  Press ‘OK’

Snooper will automatically save this location as your ‘Home’ or ‘Oﬃce’ destination.

5. Conﬁgure

The ‘Conﬁgure’ menu is used to customise the operation and appearance of your unit. To access the ‘Conﬁgure’ menu:

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the ‘Conﬁgure’ button at the top of the display.  Depending on the model the following screen (s) will be displayed.

AVN S9010/9020 V1 06/15 UK

57 • UK

Return to contents

AVN9010/20 V105.15

5.1 Bluetooth

Please refer to page 89 for further details.

5.2a Caravan/Motorhome

Setting up vehicle parameters

For Ventura to calculate a route suitable for your vehicle it needs to know certain information about the vehicle itself such as its height, weight and width. It is possible to save the settings of 10 diﬀerent vehicles. Follow these instructions to enter your vehicles details.

Press the centre of the screen to access the menu, press ‘Conﬁgure’ and then press the ‘Caravan/Motorhome’ icon.

Name: Enter the name here.

Height: Enter the height of the vehicle here.

NOTE: Maximum height including any protrusions (roof box, TV antenna etc)

Length: Enter the length of the vehicle here.

Weight: Enter the weight of the vehicle here.

Width: Enter the width of the vehicle here.

NOTE: Caravan - the maximum height, width and length must include the dimensions of the vehicle towing the caravan, whichever is the greatest (e.g. the car wing mirrors may be wider than the caravan being towed). The combined weight of the caravan and the vehicle must also be used.

Weight per axle: Enter the weight per axle of the vehicle here

Vehicle type:

 Fixed Axle: Standard setting for ﬁxed axle vehicles.

 Trailer: Speciﬁc traﬃc rules exist for vehicles towing caravans. For example, there are roads that are forbidden for towing vehicles.

These will be avoided.

5.2b Car

Setting up vehicle parameters

To enter the emission settings of your vehicle in car mode press the and enter the details as shown in the Environmental setting section page: 56.

AVN S9010/9020 V1 06/15 UK

58 • UK

Return to contents

AVN9010/20 V105.15

Environmental settings or Low Emission Zones (LEZ)

Low Emission Zones (LEZs) are areas or roads where the most polluting vehicles are restricted from entering. This means that vehicles are banned, or in some cases charged, if they enter the LEZ when their emissions are over a set level.

Vehicle emissions are classiﬁed by Euro Standards (1-6) for the vehicles that they aﬀect. In many cases another factor is whether or not the vehicle has a particulate ﬁlter or catalytic converter. Before you travel into a LEZ, you need to ﬁnd out the emissions standard of your vehicle.

All LEZs aﬀect heavy duty goods vehicles (usually over 3.5 tonnes Gross Vehicle Weight (GVW)), and most buses and coaches (usually deﬁned as over 5 tonnes GVW). Some LEZs also aﬀect vans, cars and motorcycles.

Most LEZs operate 24 hours a day, 365 days a year, with some of the Italian LEZs currently the only exceptions to this rule. To enter your environmental setting press on the arrow once in the Environmental setting page press the arrow again to return to the vehicles setting page.

Click on the options to edit the

information

Enter number of passengers carried. Enter fuel type

Enter vehicle

production date in

YYYY-MM format

Select Euro rating

press OK to save

Retroﬁt - switch

between yes (Y) and

No(N) by pressing the

Retroﬁt button

Press to return

to the previous

screen

AVN S9010/9020 V1 06/15 UK

59 • UK

Return to contents

AVN9010/20 V105.15

5.2c Truck

Setting up vehicle parameters

For Truckmate to calculate a route suitable for your vehicle it needs to know certain information about the vehicle itself such as its height, weight and width. It is possible to save the settings of 10 diﬀerent trucks. Follow these instructions to enter your vehicles details.

Press the centre of the screen to access the menu, press ‘Conﬁgure’ and then press the ‘Truck’ icon.

Name: Enter the name here.

Height: Enter the height of the vehicle here.

Length: Enter the length of the vehicle here.

Weight: Enter the weight of the vehicle here.

Width: Enter the width of the vehicle here.

Weight per axle: Enter the weight per axle of the vehicle here

Truck type:

 Truck: Standard setting for ﬁxed axle vehicles.

 Trailer: Speciﬁc traﬃc rules exist for trucks with trailers. For example, there are roads that are forbidden for vehicles with trailers.

These will be avoided. Choose between: Truck with No trailer, Truck with 1 trailer, Truck with 2 trailers, Truck with 3 or more trailers or semi or tractor with 1 or more trailers.

Load type:

 None (Normal)

 Hazardous: Hazardous goods that are not explosive or harmful for water.

 Explosive and Flammable

 Harmful for water

Tunnel Category

ADR Tunnel Codes:

 Select one of the applicable tunnel codes , by default ‘Normal’ is selected

 The tunnel category codes consist of an individual letter from “A” to “E” this will be indicated by the use of road signs

and or signals. Restrictions will not apply to category “A” tunnels as these are unrestricted and will not require any signage.

 Tunnel category A or Normal

B Most restrictive Passage forbidden through tunnels of category B, C, D and E

B1000C Carriage where the total net explosive mass per transport unit exceeds 1000 kg: Passage

forbidden through tunnels of category B, C, D and E; does not exceed 1000 kg: Passage forbidden through tunnels of category C, D and E

AVN S9010/9020 V1 06/15 UK

60 • UK

Return to contents

AVN9010/20 V105.15

B/D Tank carriage: Passage forbidden through tunnels of category B, C, D and E; Other carriage: Passage forbidden through tunnels of category D and E

B/E Tank carriage: Passage forbidden through tunnels of category B, C, D and E; Other carriage: Passage forbidden through tunnels of category E

C Passage forbidden through tunnels of category C, D and E

C5000D Carriage where the total net explosive mass per transport unit exceeds 5000 kg: Passage

forbidden through tunnels of category C, D and E; does not exceed 5000kg: Passage forbidden through tunnels of category D and E

C/D Tank carriage: Passage forbidden through tunnels of category C, D and E; Other carriage: Passage forbidden through tunnels of category D and E

C/E Tank carriage: Passage forbidden through tunnels of category C, D and E; Other carriage: Passage forbidden through tunnels of category E

D Passage forbidden through tunnels of category D and E

D/E Bulk or tank carriage: Passage forbidden through tunnels of category D and E; Other carriage:

Passage forbidden through tunnels of category E

E least restrictive Passage forbidden through tunnels of category E

NORMAL Passage allowed through all tunnels (For UN Nos. 2919 and 3331, see also ADR 8.6.3.1).

For mixed loads choose the MOST restrictive category

Disclaimer

This content gives general guidance only and should not be regarded as a complete or authoritative statement of the law. The user guide will be updated to reﬂect any developments in new legislation or case law.

5.2d Bus & Coach

Setting up vehicle parameters

For Bus & Coach to calculate a route suitable for your vehicle it needs to know certain information about the vehicle itself such as its height, weight and width. It is possible to save the settings of 10 diﬀerent vehicles. Follow these instructions to enter your vehicles details.

Press the centre of the screen to access the menu, press ‘Conﬁgure’ and then press the ‘Bus/Coach’ icon.

Name: Enter the name here.

Height: Enter the height of the vehicle here.

NOTE: Maximum height including any protrusions (roof box, TV antenna etc)

Length: Enter the length of the vehicle here.

Weight: Enter the weight of the vehicle here.

Width: Enter the width of the vehicle here.

Weight per axle: Enter the weight per axle of

the vehicle here

Num of axles: Enter the number of axles here.

Refer to page 56 for EZ sttings

AVN S9010/9020 V1 06/15 UK

61 • UK

Return to contents

AVN9010/20 V105.15

5.3 Brightness Control

Snooper brightness can be adjusted using this function within the ‘Conﬁgure’ menu. To adjust the volume:

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press ‘Conﬁgure’.  Press the ‘Brightness Control’ icon.  There are 3 settings: Auto, Day and Night.

Auto brightness

If ‘Auto’ is selected the device will automatically switch between the Day and Night brightness setting. The time the device switches is pre determined and can not be adjusted. This is the default setting.

Day

If you select ‘Day’ you can adjust the day time brightness of the LCD screen.

The brightnesses setting is controlled by the AVN S9010/20 hardware and not by the navigation software - see page ??? for details.

 Press ’Day’.

Night

If you select ‘Night ‘ you can adjust the night time brightness of the LCD screen. The brightnesses setting is controlled by the AVN S9010/20 hardware and not by the navigation software - see page ??? for details.

 Press ’ Night’.

Once you have adjusted both ‘Day’ and ‘Night’ brightness you should select ‘Auto’ then OK to save the setting. If Auto is not selected then the screen will not switch between day and night automatically.

Day view

Night view will change both the screen brightness and the map colours.

AVN S9010/9020 V1 06/15 UK

62 • UK

Return to contents

AVN9010/20 V105.15

5.4 Language

Snooper comes with a choice of voice prompts and alerts in several languages. Changing the language also changes the language of the menu items as well on the unit. To use this facility:

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press ‘Conﬁgure’.  Press the ‘Change Language’ icon.  Using the up and down arrows search for the voice you require.  If you would like to listen to a sample of any voices simply press the ‘Test’

button.

 Press ‘OK’ to save your setting.

5.5 Setup

The ‘Setup’ function allows you to customise the visual information provided by the navigation screen. To alter any of these settings:

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the ‘Conﬁgure’ button.  Press the ‘Setup’ icon where you will see the list of options below.  Select the option you wish to change on the left.

There are number of diﬀerent pieces of information that you can have displayed on the navigation screen at any one time as follows:

Note: Text or settings highlighted in Orange are the current options selected.

5.5.1 2D/3D or North

This option allows you to select the view of the map that you would like to have displayed. The 3D navigation view is displayed as the factory default and displays the map, calculated routes, Points Of Interest and safety camera data (if subscribed to) from a 3D perspective.

This facility customises the map view between.

To make your selection, touch the relevant radio button.

Use the up & down arrows to scroll

through the menu options

3D 2D North

AVN S9010/9020 V1 06/15 UK

63 • UK

Return to contents

AVN9010/20 V105.15

5.5.2 Speed/Time

This option allows you to change the information displayed in the bottom left hand side of the navigation screen between the vehicle speed and the current time. You can also specify if you want to display a twelve or twentyfour hour clock and whether to display ‘am’ and ‘pm’.

To make your selection, touch the relevant radio button.

5.5.3 MPH/KMH

This option allows you to switch the information on Snooper between imperial and metric measurement.

To make your selection, touch the relevant radio button.

5.5.4 Arrival/Remaining

This option allows you to display either the estimated time of arrival (ETA) or the estimated remaining time left for your journey towards the bottom of the navigation screen.

To make your selection, touch the relevant radio button.

To save the changes press the ‘OK’ button at the bottom of the display.

If you wish to keep the settings unchanged you can exit the ‘Setup’ menu by pressing the return arrow

located in the bottom right hand

corner of the display.

Your new settings will now be saved and will appear on the screen each time you use Snooper.

AVN S9010/9020 V1 06/15 UK

64 • UK

Return to contents

AVN9010/20 V105.15

5.5.5 Map Text Size

This option allows you to increase or decrease the size of the road and place name text which appears on the map screen.

Select the text size then press OK to save and exit.

5.5.6 Car Icon

This option allows you to choose the icon which appears on the navigation screen.

Press the required icon then press OK to save.

Truck

Motorhome

Car

Default

AVN S9010/9020 V1 06/15 UK

65 • UK

Return to contents

AVN9010/20 V105.15

5.5.7 Lane Guidance

Lane guidance will show which lane you should take at a junction, road merges and/or road exits.

Note: A route must be active for lane guidance to operate.

Note: Lane guidances currently only available on Motorway’s and major trunk roads.

5.5.8 Junction Number

Choose between whether you want the junction numbers to be displayed or not.

Camera alert

In order for these features to operate you will need to subscribe to and download the AURA™ Camera Database onto Snooper. See ‘Registering Snooper’ (Page 3) and ‘System Requirements & Downloading’ (page 15) for further details.

5.5.9 Display Cameras

You can choose between the following options:

Yes: A safety camera visual warning will be displayed on the left

hand side of the navigation screen as they are approached.

No: No ﬁxed speed safety camera warnings are displayed on the

navigation screen.

To make your selection, touch the relevant radio button.

To save the changes press ‘OK’ at the bottom of the display.

If you wish to keep the settings unchanged you can exit the ‘Setup’ menu by pressing the return arrow located in the bottom right hand corner of the display.

Lane Guidance On

Junction Numbers On

Lane Guidance Oﬀ

Junction Numbers Oﬀ

AVN S9010/9020 V1 06/15 UK

66 • UK

Return to contents

AVN9010/20 V105.15

5.5.10 Alert Sound

You can choose between the following options:

Yes: The unit will emit an audible alert when you approach a ﬁxed

speed safety camera

No: No audible alert is emitted.

Beep Tone

This function allows you to change the audible camera alert tone to either a ‘Hard’ or a ‘Soft’ tone.

To make your selection, touch the relevant radio button.

5.6.11 School (Low bridge Truckmate and Ventura ONLY )

You can choose between the following options:

Yes: Provided you have selected the option to download schools on

Snooper updater software, this feature enables the unit to alert you when you are near a primary school*.

No: The unit will not provide alerts of Primary schools. Schools are

indicated on Snooper display by the

icon.

*Please note: Snooper will only provide alerts to Primary Schools at the following speciﬁed times: 08:30 – 09:30; 12:00 – 13:00 and 15:30 – 16:30.

To make your selection, touch the relevant radio button.

5.5.12 Touch Tone

You can choose between the following options:

Yes: The unit emits a conﬁrmation tone each time the screen is

touched.

No: This will turn oﬀ the conﬁrmation beep when the screen is

touched.

To make your selection, touch the relevant radio button.

To save the changes press ‘OK’ at the bottom of the display.

If you wish to keep the settings unchanged you can exit the ‘Setup’ menu by pressing the return arrow

located in the

bottom right hand corner of the display.

AVN S9010/9020 V1 06/15 UK

67 • UK

Return to contents

AVN9010/20 V105.15

5.5.13 Route Alert

If you deviate from the calculated route, Snooper will automatically recalculate a route without any user intervention. To indicate rerouting is in progress Snooper will emit an audible tone.

You can choose between the following options:

Yes: The re-route tone will be emitted during recalculation.

No: No re-route tone will be emitted.

To make your selection, touch the relevant radio button.

5.5.14 Auto Scale

Auto Scale is switched ‘On’ by default during manufacture. Auto Scale automatically magniﬁes the map as you approach a junction or roundabout, where you may need to make a turning, so that you can see it in more detail.

Auto Scale can be turned on and oﬀ as you wish.

The screen will show two options ‘Ye s’ and ‘No’. To make your selection, touch the relevant radio button.

To save the changes press the ‘OK’ button at the bottom of the display.

If you wish to keep the settings unchanged you can exit the ‘Setup’ menu by pressing the return arrow

located in the

bottom right hand corner of the display.

5.5.15.1 My Speed

The speed limit of nearly every road across Europe can now be clearly displayed on your Snooper at all times. To select the correct speed limits for your vehicle type:

Car - Advisory speed limits for a vehicle will be displayed Caravan - Advisory speed limits for a vehicle towing a caravan will be displayed Motorhome - Advisory speed limits for motor homes will be displayed Truck 3.5t - 7.5t - Advisory speed limits for vehicles from 3.5T to 7.5T will be displayed Truck 7.5t - 12t - Advisory speed limits for vehicles from 7.5T to 12T will be displayed Truck > 12t - Advisory speed limits for vehicles greater than 12T will be displayed

Select the option you require by pressing the radio button next to the vehicle type. Press

‘OK’ to save the setting.

WARNING: These are advisory speed limits and are subject to change. It is the responsibility of the driver to check the road side speed limit signs and abide by local driving regulations.

5.5.15.2 Over speed

It is possible for My Speed to alert the driver, via an audible warning, that they have exceeded the speed limit. To set the over speed warning:

Press the

to increase or decrease the over speed warning

Press OK to save.

AVN S9010/9020 V1 06/15 UK

68 • UK

Return to contents

AVN9010/20 V105.15

5.5.16 My Speed XL

If you are not using your device as a navigation device you can utilise the My Speed data and speed camera data*.

If My Speed XL is switched On the navigation screen is replaced by the My Speed XL screen.

Note: If a route is plotted and active, then My Speed XL will NOT be displayed on the main screen.

*In order for these features to operate you will need to subscribe to and download the AURA™ Camera Database onto Snooper. See ‘Registering Snooper’ (Page 3) and ‘System Requirements & Downloading’ (page 15) for further details.

WARNING: These are advisory speed limits and are subject to change. It is the responsibility of the driver to check the road side speed limit signs and abide by local driving regulations.

5.5.17 Sharp curve alert

This will show or hide the on screen alerts for sharp bends.

This screen will show two options ‘Ye s’ and ‘No’. To make your selection, touch the radio button.

To save the changes press ‘OK’ at the bottom of the display.

If you wish to keep the settings unchanged you can exit the ‘Setup’ menu by pressing the return arrow

located in the bottom

right hand corner of the display.

Direction

Current timeVehicle speed

If you have subscribed to and downloaded the AURA™ database the speed will be replaced by a camera symbol and an audible warning will be heard.

Road speed

AVN S9010/9020 V1 06/15 UK

69 • UK

Return to contents

AVN9010/20 V105.15

Press the right hand arrow to move to the next menu screen

5.6 GPS status

You can check the health of the GPS connection of your unit at any time as well as being able to see the exact coordinates of your current position by using this feature.

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the ‘Conﬁgure’ button.  Press the arrow

once.

 Press the ‘GPS status’ icon.

Your current GPS status will then be displayed. If you wish to revert the GPS engine to the factory default, press the ‘Reset’ button.

If you wish to exit the ‘GPS status’ menu press the return arrow located in the bottom right hand corner of the display.

5.7 Change Map Colour

This function allows you to choose between the alternative colour schemes that are available for the maps used in the Snooper system (several of which are most suitable for use at night). To access this facility:

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the ‘Conﬁgure’ button.  Press the arrow

once.

 Press the ‘Change map colour’ icon.

Use the arrows to the left and right hand side of the map display to cycle through the diﬀerent colour schemes. There are ten colour schemes to choose from.

To save the changes press the ‘OK’ button at the bottom of the display.

If you wish to keep the settings unchanged, you can exit the ‘Change map colour’ menu by pressing the return arrow located in the bottom right hand corner of the display.

AVN S9010/9020 V1 06/15 UK

70 • UK

Return to contents

AVN9010/20 V105.15

5.8 Qwerty Keyboard

This function allows you to switch between a ‘Qwerty’ keyboard which is the keyboard selected as the factory default setting or a keyboard arranged in alphabetical order (ABC).

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the ‘Conﬁgure’ button.  Press the arrow

once.

 Press the ‘Qwerty keyboard’ icon.  Select ‘Ye s’ or ‘No’ depending on the keyboard preferred.

Note: When a keyboard is displayed it can be changed from QWERTY/ABC to Cyrillic script.

Press the

and a list of available keyboards

will be displayed.

To save the changes press the ‘OK’ button at the bottom of the display.

If you wish to keep the settings unchanged, you can exit the ‘Qwerty keyboard’ menu by pressing the return arrow

located

in the bottom right hand corner of the display.

Querty ABC

AVN S9010/9020 V1 06/15 UK

71 • UK

Return to contents

AVN9010/20 V105.15

5.9 System Security Code (on Truckmate or Ventura this icon will NOT be visible if the unit is in CAR mode).

Snooper incorporates pin code security protection so that only users with access to the pin code can use and operate the device. To activate the security code press the centre of the display to access the menu, press ‘Conﬁgure’ , press the black arrow twice and then press the ‘System Security Code’ icon. Select ‘Yes’ to

switch the function on. Press the ‘Enter Code*’ button and enter the 4 digit code that you would like to use to protect your Snooper and press ‘OK’.

*If the button displays ‘Change Code’ then a security code has already been set. Press ‘Change Code’ to edit the system security code.

Once this setting has been activated you will need to enter this code each time you power on your Snooper or you will not be able to operate the device.

NB. It is important that you do not lose or forget this code. If you forget this code you will need to return your Snooper so that the unit can be reset.

5.10 Conﬁguration Security Code (on Truckmate or Ventura this icon will NOT be visible if the unit is in CAR

mode).

It is also possible to protect the conﬁguration settings using a security pin code. To activate the security conﬁguration code press the centre of the display to access the menu, press ‘Conﬁgure’, press the black arrow twice and then press the ‘Conﬁguration Security Code’ icon.

The methodology of setting this code is the same as described in section 5.12 ‘System Security Code’. Once this code is set the user will not be able to change any of the settings, within the ‘Conﬁgure’ menu, without entering the code. This includes using an alternative Truck or Caravan (when programmed) when plotting a route.

NB. It is important that you do not lose or forget this code. If you forget this code you will need to return your Snooper so that the unit can be reset.

Enter code Incorrect code entered Correct code entered

AVN S9010/9020 V1 06/15 UK

72 • UK

Return to contents

AVN9010/20 V105.15

5.11 Route Timer

This function allows you to set an alert for when you need to take a break. Set the maximum driving time allowed and set the advanced warning time you require before your next break is due. The Route timer clock will then keep you advised of the driving time you have left and will automatically alert you when it’s time to take a break.

To access this function:

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the ‘Conﬁgure’ button.  Press the arrow

once.

 Press the ‘Route Timer’ icon.

The following screen will be displayed. In this screen you can:

 Activate the route timer function so that it is shown in the map display. Note:

If ‘ Yes ’ is not selected then you cannot amend the ‘Set time limit’ and ‘Alert time’ options

 Set the duration of the time limit in hours and minutes - use the arrows to increase or decrease the time. The default setting is four

hours.

 Before the time limit is up you can conﬁgure the unit to provide you with an alert to remind you that you are nearing your break

period. The default period is 20 minutes.

Once you have set your desired preferences press ‘OK ’ to conﬁrm the settings.

If you wish to keep the setting unchanged, you can exit the menu by pressing the return arrow

located in the bottom right

hand corner of the display.

Press the right hand arrow to move to the next menu screen

Or press the left hand arrow to move to the previous menu screen

Route timer

Pause Stop Reset

Press route timer to show options

AVN S9010/9020 V1 06/15 UK

73 • UK

Return to contents

AVN9010/20 V105.15

5.12 Version

This option allows you to view the hardware and software version numbers of your unit. To view this information:

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the ‘Conﬁgure’ button.  Press the arrow

twice.

 Press the ‘Version icon.

The following screen will be displayed.

Displays the hardware version

Displays the current software version

Displays the current map version

Displays the date the AURA™ camera database was last downloaded*.

Displays the unit serial number

*If you do not subscribe to the AURA™ camera database or the unit has never been downloaded the message ‘No camera data available’ will be displayed.

5.13 Show POI

Snooper comes complete with a comprehensive list of POI’s (Point’s of Interest). You can search for addresses using POI’s and save POI’s in your list of favourites. You can also choose which of the POI’s you would like to have indicated on your map. As standard ALL POI’s are shown, however this list can be edited within the POI Menu.

 Press the centre of the screen to enter the ‘Navigate to’ menu.  Press the ‘Conﬁgure’ button.  Press the arrow

twice.

 Press the ‘Show POI’ icon.

The screen will now show a list of POI’s stored on your unit with a ‘tick’ box to the left of each type of POI. Simply press the tick box to select or deselect the POI. A tick in the box indicates that the POI will appear on your map, an un-ticked box will remove the POI from the map view. To scroll through the list of POI’s you can press either the up or down arrows located on the right hand side of the display.

To deselect all POI’s from the map un-tick the ‘ALL’ tick box at the top of the list of POI’s

To save the changes press the ‘OK’ button at the bottom of the display.

If you wish to exit the ‘Show POI’ list without saving any changes press the return arrow

located in the bottom right hand

corner of the display.

AVN S9010/9020 V1 06/15 UK

74 • UK

Return to contents

AVN9010/20 V105.15

Advanced Navigation Options

6. Route option

If you would like to personalise your route, press the ‘Route option’ button, before pressing the ‘Calculate’ button. This will give you a choice of calculating a route that takes the shortest time or the shortest distance and will also allow you to calculate a route that avoids any Toll Roads and Motorways if necessary.

There are a number of diﬀerent options available to enable you to select either the most eﬃcient route for you to take or to enable you to personalise the route calculated. The following options are available every time you program a route, whether you search by Post Code, City or by a POI.

Simply check the tick box with your ﬁnger the feature you would like to activate.

The choices are as follows:

6.1.1 Shortest Time

Shortest Time

This option will calculate a route based on time using a combination of Motorways, ‘A Roads’ and ‘B Roads’ as necessary. The route is calculated by Snooper to navigate you to your destination in the shortest time possible whilst adhering to the national speed limits.

6.1.2 Shortest Distance

Shortest Distance

This option will navigate you to your destination using a combination of roads calculated to cover the least number of miles possible. It may be the most direct route but it could take you longer to arrive!

Please note: Of the two options described above only ONE option can be selected during the Route Option conﬁguration.

6.1.3 Avoid Tollway

Avoid Tollway

If you want to calculate a route avoiding any type of Toll Roads, select this feature before calculating your route. Press again to deselect.

6.1.4 Avoid Motorway

Avoid Motorway

If you would like to take a more leisurely journey with the chance of a more picturesque view then select the ‘Avoid Motorway’ option and your route will be calculated accordingly. Press again to deselect.

Please note: The ‘Avoid Tollway’ and ‘Avoid Motorway’ options can be used in conjunction with each other.

AVN S9010/9020 V1 06/15 UK

75 • UK

Return to contents

AVN9010/20 V105.15

Other routing options are:

6.2 Navigate Avoiding Road

Please note: This option can only be used once a route has been calculated. If a route has not been calculated then this is indicated by the button being greyed out.

6.2.1 Avoid by Road Name

If you know the road name or road number you wish to avoid, then select this option.

 Press ‘Avoid by Road Name’.

You will be provided with the turn by turn instructions of the route that you are currently following. If the road you are looking for is not visible, press the down arrow on the right hand side of the display to see further turn by turn instructions.

 Once you have found the road that you wish to avoid, select it with your ﬁnger.

Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to complete your journey.

Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with turn-by-turn instructions.

6.2.2 Avoid by Range

If you wish to avoid several roads from the selected route calculated by Snooper, then this function allows you to re-calculate a route over a user deﬁned distance, ranging from 1 mile up to a maximum of 100 miles.

To use this function:

 Press the ‘Avoid by range’ button - the ‘Select avoided range’ page will

be displayed.

 Select the distance of the range you wish to avoid.

If you wish to view more range distances then press the down arrow on the right hand side of the display. Once you have selected the range you wish to avoid, Snooper will automatically re-calculate your route.

Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to complete your journey.

Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with turn-by-turn instructions.

AVN S9010/9020 V1 06/15 UK

76 • UK

Return to contents

AVN9010/20 V105.15

6.2.3 Clear Avoided Road

If you do not wish to use the alternative routes oﬀered by Snooper and you wish to return to the original calculated route, press the ‘Clear Avoided Road’ button and the original route plotted by Snooper will be restored.

Once the re-calculation of the original route is complete the summary screen is displayed. Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to complete your journey.

Please Note: If you have already travelled some of the re-calculated route, Snooper may produce a slightly diﬀerent route from what was originally plotted.

The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with turn-by-turn instructions.

If the ‘Avoid by Road’ and ‘Avoid by Range’ have not been used, this feature is unavailable and the button will be greyed out.

6.3 Navigate Via Location

If you would like to calculate a route to a destination but want to go via a speciﬁc location along the way you can use this function. Simply input the details of your ﬁnal destination as usual but press the ‘Route Option’ button in the summary screen and then select the ‘Navigate Via Location’ button. You are provided with the following search options:

 Find address by City  Find address by post code  Find by POI  Find by recently used

To ﬁnd out how to use these options please refer to the applicable sections in this user manual.

Once you have found the address or location you would like to go to via your route, press the ‘Set’ button. A red tick is now displayed on the ‘Navigate Via Location’ button.

Now press the ‘Done’ button followed by the ‘Calculate’ button.

If you would like to check the route calculated prior to departure, press the ‘Guide’ button on the Summary screen which will give you a list of each turn by turn instruction from the start of your journey to the end.

AVN S9010/9020 V1 06/15 UK

77 • UK

Return to contents

AVN9010/20 V105.15

6.4 Change Start Position

You can use this function if you would like to calculate a route but from a diﬀerent location to the one you are currently at. First input your destination address as normal but when you reach the Summary page, press the ‘Route Option’ button.

Now press the ‘Change Start Position’ icon. You are provided with the following search options:

 Find address by City  Find address by post code  Find by POI  Find by recently used

To ﬁnd out how to use these options please refer to the applicable sections in this user manual.

Once you have found the new starting point, press the ‘Set’ button.

The ‘Change Start Position’ is now highlighted. Now press the ‘Done’ button followed by the ‘Calculate’ button.

6.5 Summary Screen

The summary screen provides you with the information of your intended route such as distance to destination and estimated time of arrival for example and gives you the option of making any changes or viewing the route prior to commencing your journey.

6.5.1 Simulation

Press the ‘Simulation’ button and Snooper will take you through the calculated journey step by step with full on screen and voice instructions.

Simulation speed can be increased to a maximum of ten times ‘real time’ by pressing the + and -buttons

Please Note: If at any time you wish to cancel the simulation press the return arrow

located in the bottom right hand corner

of the display.

6.5.2 Route Options

The ‘Route Option’ function can be accessed from this page, this allows you to tailor your journey using options such as ‘Shortest Time’ or ‘Shortest Distance’ Please refer to the ‘Route Option’ section of this manual for more details.

6.5.3 Guide

If you would like to check the turn by turn instructions of the route calculated prior to departure press the ‘Guide’ button on the Summary screen.

to

AVN S9010/9020 V1 06/15 UK

78 • UK

Return to contents

AVN9010/20 V105.15

7.0 Quick Access Menu

A small on-screen Menu can be launched by touching the screen anywhere along the top 10mm of the display. See diagram below.

The quick access menu will drop down automatically. If no other buttons on the drop down box are pressed the drop down box disappears after approximately three seconds.

From this Menu you can:

 Zoom closer in, or zoom further out from the map.  Mute or alter the audio level.  By pressing the

icon you can manipulate the map.

 Switch between the 2D, 3D and North views.  Switch between day and night settings.  Switch oﬀ the speed camera location facility.

7.1

Volume Setting

Selecting this option opens the Volume menu whereby you can increase or decrease the audio level of the unit. Press the ‘Volume Control’ icon. To adjust the volume, use your ﬁnger to press either the

button to increase the volume or the button to

decrease the volume (Does not apply for the S2500 Model).

Please note that this new setting is only temporary and if Snooper is switched oﬀ and then back on the audio level returns to either the factory default or your personalised setting.

If you press the speaker icon

you can turn oﬀ the audio on the unit completely. A symbol is displayed in the top left hand corner of the display to indicate that the sound has been switched oﬀ. If Bluetooth is activated the symbol is not visible.

To switch the sound back on press the screen near the top of the display and select the ‘Volume Control’ icon. Press either the speaker icon or the volume controls to restore audio on the unit.

7.2

Scroll Map

By pressing this icon you can manipulate the map by touching and moving your ﬁnger on the screen.

7.3

or

Day or Night Settings

Bright colours are normally used for the mapping display so that you can see the map more clearly, even in bright sunlight. When it is dark outside however, you may want to switch to the Night Mode

as the daytime setting will be too bright.

The navigation view will then be displayed using dark and subdued colours that will not interfere with your night vision.

Use Day

to revert to the original colour scheme.

Please note: If you switch the unit oﬀ and then back on the display reverts to your previous personalised setting.

AVN S9010/9020 V1 06/15 UK

79 • UK

Return to contents

AVN9010/20 V105.15

7.4 Camera Alerts (Only applicable if you have subscribed to the AURA™ Camera Database)

This function allows you to temporarily disable the safety camera alerts. If you press the camera icon

you can turn the camera alert on or oﬀ. A symbol is displayed in the top right hand corner of the display to indicate that the alert has been switched oﬀ.

To restore the camera alerts press the top of Snooper’s display to show the drop down menu and then press the camera icon.

Please note that if the unit is switched oﬀ and then switched back on the camera alerts are automatically enabled.

7.5

Magnify or Reduce Function

The map on the display can be magniﬁed or reduced by pressing on the

or

buttons displayed from the drop down menu. This

will also show the quick menu at the base of the display.

AVN S9010/9020 V1 06/15 UK

80 • UK

Return to contents

AVN9010/20 V105.15

8. Understanding the Mapping Screen

Distance to next junction or instruction

Whilst navigating a calculated route the Snooper display will show an information box. This box will tell you the next road you should be travelling on and the distance to that turn. The screen will also show you either the expected time of arrival or the time left to go. The distance left to your destination will also be displayed.

The red line on the map indicates the route you will be taking, clearly and precisely.

Next turning or instruction

As you approach the next turning or instruction, a window will indicate the exact action that you need to take.

The red line indicates the route you will be taking

Next motorway exit or road you are due to travel on

Distance left to next instruction

Estimated time of arrival

(If you would like to change this to Time left to arrival simply tap the screen on time left to change it)

Indicates that you are approaching a ﬁlter lane and you need to keep RIGHT

Distance left to travelLane Guidance

Distance to next road

Current road

AVN S9010/9020 V1 06/15 UK

81 • UK

Return to contents

AVN9010/20 V105.15

Updating Maps

New mapping is periodically released by Snooper. To check if map updates are available please visit:

https://www.snooperneo.co.uk/MapSerialCheck.cfm

NOTE: Your device must be registered at https://www.snooperneo.co.uk/RegisterSatNav.cfm to receive map updates and map updates may be chargeable.

1. Once on the website you will be asked for information appertaining to your device. You will need: serial number (S/N), software version (S/W) and map version (Map) . This information can be found on the ‘Version’ screen of your device (see page 72 for details of how to view the version screen).

IMPORTANT: BEFORE STARTING THIS PROCESS PLEASE ENSURE YOUR DEVICE IS NOT CONNECTED TO THE PC.

2. Download and SAVE the Snooper Map Downloader software to your PC. We recommend saving the ﬁle to your desktop. Once the ﬁle has downloaded, double click the ﬁle below to start the Map Downloader installation.

3. Please press the ‘Run’ button when/if the screen below appears.

4. The installation of the software should commence.

5. Continue to click ‘Next’ until the installation completes

6. Click ‘Close’ to close the installation window.

7. A new icon will be on the desktop of your PC. Double click on the icon to open the program

8. Choose your language by clicking on the applicable ﬂag.

AVN S9010/9020 V1 06/15 UK

82 • UK

Return to contents

AVN9010/20 V105.15

PLEASE CONNECT THE NAVIGATION MicroSD TO THE PC UISNG THE SD CARD READER PROVIDED.

9. The Map Downloader program will read your device’s serial number and you will see tthe screen shown below.

Note: Where the ***** appears, your serial number will be displayed. Click ‘Continue’ to start the download process.

IMPORTANT: AFTER CLICKING ‘CONTINUE REMOVE THE SD CARD READER FROM THE PC.

Note: the version shown here will be diﬀerent than the downloaded one and the download duration is dependent on the internet connection speed.

10. Once the download has completed the Map Downloader will unpack the package in readiness for updating your device.

11. Click ‘Run’ to proceed.

12. If you have not already done so, reconnect the MicroSD card reader to the PC.

13. The update is complete, disconnect your device from the PC and close the program.

IMPORTANT: FOR SUBSEQUENT MAP UPDATES YOU DO NOT NEED TO CARRY OUT STEPS 1 to 6 AND THE MAP DOWNLOADER IS ALREADY INSTALLED ON YOUR PC.

AVN S9010/9020 V1 06/15 UK

83 • UK

Return to contents

AVN9010/20 V105.15

Troubleshooting Downloads

If you are having any diﬃculty in performing a download onto the unit it is advisable to refer to the checklist in Section A ﬁrst before contacting us.

If you are still unable to perform a download after following all of this checklist then please send an email to Support@snooper.eu stating the nature of your diﬃculty. To expedite your enquiry please supply as much detail as possible including your contact details, AVN S9010/20 serial number, PC operating system, error codes and any other relevant information. One of our technicians will reply as soon as possible.

Alternatively you can contact our Technical Helpline on 0333 240 1000 during oﬃce hours and select Option 3.

This troubleshooting guide is in two sections; Section A is in the form of a checklist that will assist you with resolving common download problems. Section B consists of a few possible reasons and possible solutions to error messages that may be displayed by the operating system or the software whilst you are trying to perform a download.

SECTION A

1. Have you registered the unit?

You will not be able to download the database unless AVN S9010/20 is registered. If the unit has not been registered, a message will appear on the software informing you that the device is not enabled. Please register online at www.snooperneo.co.uk.

2. What operating system are you using on your computer?

Snooper download software will only work on the following Windows operating systems:

Windows Vista, Windows 7and Windows 8.

The software will not work on Windows 95, 98, 98SE, Millennium, Windows 2000 and Windows XP; Apple Macintosh operating

systems are not supported.

To determine which operating system you have on your computer:

Right click on the ‘My Computer’ icon on your desktop and select ‘Properties’ from the drop down menu. When the ‘System Properties’ dialogue box opens, the ‘General’ tab is selected by default. Under the heading of ‘System’ the operating system is displayed.

If you do not have a ‘My Computer’ icon on your desktop you can ﬁnd this information by going to the ‘Control Panel’ and double left clicking the ‘System’ icon. The ‘System Properties’ window will then be displayed as outlined in ‘b’ above.

3. Is the MicroSD card reader supplied with AVN S9010/20 connected correctly? Please make sure the card reader has a secure connection to the PC and is fully plugged in.

4. Have you installed Speed Camera or map download software onto your PC?

If you have not installed the speed camera or map update software you will not be able to perform a updates to AVN S9010/20. Once the software is installed there will be a new icon in your system tray, desktop. The icon is similar to this

Please check to see if you have the latest version of the software by visiting http://www.snooperneo.co.uk/software.cfm. To check what speed camera updater or map download software version you have, double left click the software icon on your desktop, look at the top of the window that opens and you will see the version number in brackets.

5. Have you connected the computer to the internet?

The software has to download ﬁles directly from our server and this can only be done if an internet connection is present. Therefore make sure that your PC is connected to the internet before you begin to download the data to AVN S9010/20.

AVN S9010/9020 V1 06/15 UK

84 • UK

Return to contents

AVN9010/20 V105.15

SECTION B

This section is for supplying possible reasons and solutions to problems you may be experiencing whilst trying to down load the database to AVN S9010/20. If after completing all the checks in Section A you are still experiencing diﬃculty or have received an error message please read through the following:

1. ERROR MESSAGE – ‘The device has not been enabled yet.’ Please refer to Step 1 in section A for further details.

2. ERROR MESSAGE - ‘Error 521: There was a problem connecting to the Performance Products server…’

If you get an error message as described above this normally means that there is something blocking communication between the software, most typically a ﬁrewall, and the AURA™ server. Windows Vista, Windows 7 & Windows 8 are supplied with a built in ‘Internet Connection Firewall’. Depending upon which ﬁrewall software you have you will need to access the ﬁrewall settings and allow access for the 8 Series update software.

If you do have a Firewall on your computer the speed camera or map downloader software may appear to stop and it is at this point that your Firewall software will inform you that software is trying to access the internet. Please make sure that you grant/allow/ permit access through the Firewall.

Please read the messages supplied by your Firewall software carefully before choosing your option. If you do not allow the program access to the internet through the Firewall, the download process will fail.

If no message was prompted by the ﬁrewall software uninstall and then re-install the software and perform a download again.

Warning: We do not recommend disabling your ﬁrewall software in order to perform a download to AVN S9010/20, nor can we provide advice on how to alter the settings on third party software, nor can we be held responsible for any action taken by the PC user that makes the PC more vulnerable to malicious viruses, software and computer hackers. Any changes made to the PC ﬁrewall settings are solely at the PC user’s discretion. We would recommend contacting the third party software manufacturer for further information of how to conﬁgure the ﬁrewall software.

SECTION C

1. Can’t receive a GPS signal

Please avoid places such as between tall buildings, overpass and tunnels and check the signal reception in a suitable place with

a good view of the sky.

2. Can’t hear anything from speaker or earphone

Please check the volume level.

Please check the Mute status.

For earphone, please check if the jack is inserted properly.

3. Screen is dark.

Adjust the LCD brightness from the Setting menu.

4. Touch function does not work well.

Please touch the screen accurately because it will not be recognized if you touch the screen with ﬁngernails only or with

less pressure.

Please perform Touch Calibration.

AVN S9010/9020 V1 06/15 UK

85 • UK

Return to contents

AVN9010/20 V105.15

DVD Function Operation

The AVN S9010/20 will play the following formats: DVD/VCD/CD/MP3/JPEG/MPEG4/CD-R, etc. (Limited to diameter l2cm standard disc).

1. Enter/Exit

Touch

to enter DVD interface.

Touch “MAIN” icon to enter home page.

Press ‘MAIN’ to enter the main menu. Press DVD

When the unit is in Navigation mode and a DVD is inserted the AVN S9010/20 will play sound but the screen will not display the DVD images.

2. Disc Eject/Load

 A DVD can be inserted at any time and the system will automatically switch to DVD mode.  Insert the disc with the label facing upwards. When the system detects the disc, it will automatically begin to play.

3. Numeric Keyboard

Touch the

icon on the screen, to pop out the numeric keypad (as Figure on the right

shows) .

Touch the number, on the number pad to select a chapter directly, and then click

to conﬁrm. Touch to hide the

numeric keypad.

While MP3/MP4 playing, if you want to select a track greater than 10, ﬁrst, select two digits on the numeric keypad and click “OK” to conﬁrm. For example, to select track 12, ﬁrst, select button “1”, then button “2”, ﬁnally, press ”OK” to play.

4. Touch Menu Function Description

x FR x FF Previous track Next track Play/pause Stop

AVN S9010/9020 V1 06/15 UK

86 • UK

Return to contents

AVN9010/20 V105.15

Stop/Back to title menu/PBC switch (disc support is required)

Switch DVD language (disc support is required); switch VCD sound.

Switch DVD subtitle select (disc support is required)

Go to Title Menu (disc support is required)

Image can be captured when playing disc Menu column of the next page

Enlarge/reduce image Repeat Shuﬄe Menu column of the previous page

On fast-forward playback, press the fast-reverse button to enter the normal playback.

On fast-reverse playback, press the fast- forward button to enter the normal playback.

Touch the screen anywhere to show/hide the menu

Touch

icon to exit from touch menu.

Touch

icon to enter home page menu.

5. DVD Disc Playing

If the DVD has no menu, the system will automatically read the disc and play directly. lf the disc has a menu, touch the menu item to play.

Touch the

icon II to return to main menu of the disc (Disc support may be

required).

During playback of a disc, press the upper right part of the screen to display the play information (as per the picture on the right).

Current track Play time Play status number

Note During playback, operate the touch menu to perform various play controls. For function deﬁnitions of touch menu, please refer the 4th item of DVD function operation ”Functions of Touch Menu“.

TITLE

JPEG

AVN S9010/9020 V1 06/15 UK

87 • UK

Return to contents

AVN9010/20 V105.15

6. CD Disc Playback

Insert a CD, and the disc will be loaded and played in default order.

During playing a disc, the system will automatically switch to spectrum state if there is no operation within 10s.

If the disc has the title, the track can be chosen directly by the number pad.

Note: During playing, operate the touch menu to perform various play controls. For function deﬁnitions of touch menu, please refer to section 4 above for DVD “function operation“.

7. MP3 Disc Playing

Insert a MP3 disc, the disc will be loaded and will play the ﬁrst ﬁle automatically.

Touch the title of the list to play directly, touch

/ to browse the list. During playing a disc, the system will automatically switch

to Spectrum State if there is no operation within 10s.

8. MPEG4 Disc Playing

 MPEG is the abbreviation of “Moving Pictures Experts Group”, and the MPEG4 is the fourth generation encoder standard for video

audio as released by the specialist’s group.

 The play operation of MPEG4 disc is basically the same as DVD disc.  The MPEG4 disc adopts diﬀerent kinds of format, such as: XVID, the AVI DIVX, RM,

etc.

 MPEG ﬁles are displayed on the player in the form of folder/ﬁle. Move the cursor to

the small icon at the front through the up & down arrows and press the play button for play. For detailed operation, please refer to the “MP3 disc playing”.

The other play functions are the same as the one of DVD play.

Disc play information/state/name

Playing time

Track number

Total playing time

Play/Pause

Stereo/Mono

Chapter/Track number

AVN S9010/9020 V1 06/15 UK

88 • UK

Return to contents

AVN9010/20 V105.15

9. JPEG Disc Playing

Insert JPEG disc into the DVD player, and the disc will be read, and the system will play the ﬁrst ﬁle automatically.

 During playing, click. once to return to the image browse interface.

 Click the picture to view it.

 Click / to browse images.

 Click the icon to view the picture(s) in the current folder at random.

 Click one more time, it will return to the catalogue menu interface.

USB Operation

If the AVN S9010/20 has the optional USB cable (with female USB port) ﬁtted, a USB portable memory drive can be attached .

NOTE: Before removing a portable USB drive from the AVN please exit USB mode.

Enter USB Mode

In the main menu press

or if you connect the portable USB memory drive the AVN will recognise that a device has been connected and it will automatically switch to USB mode.

Once the USB drive has been read the playing instructions are the same as for a MP3 disc, please refer to page 85 for details.

As the standard of portable USB memory drives is not universal some devices may not operate with the AVN S9010/20.

For optimum performance keep the USB cable, between the AVN unit and the USB drive as short as possible.

Play Status :

Contents menu interface:

AVN S9010/9020 V1 06/15 UK

89 • UK

Return to contents

AVN9010/20 V105.15

DVD/CD. DVD System Setup

1. Turn on/oﬀ

To enter DVD set up menu please press

Click again to exit from the setting menu.

In DVD mode, press the icon to enter the corresponding function interface.

2. Operation

Press the tab of each setup menu to access the DVD settings.

Click “exit” to exit.

General Setup

DVD Display

Normal/Ps Images will be scanned and output will be in Panoramic format.

Normal/Mb Images will be scanned and output in the format of “Message Box”

Wide Images will be scanned and output in the format of “Wide Screen”

AngleMark

On/Oﬀ Display the angle mark

SPDIF OUTPUT

SPDIF OFF Output signal is analog signal.

SPDIF/RAW Output original code stream source of the disc through digital port, when DVD coaxial output and digital ampliﬁer are connected through coaxial port, this set should be selected.

SPDIF/PCM Original code stream source be transfer and output as PCM digital signal. When DVD audio output analog signal and 2 sound channel digital stereo ampliﬁer are connected, this set should be selected.

NOTE: PCM channel item can be set as long as “SPDIF IPCM” was selected. If LPCM coding sample rate of disc is lower than the one selected, then output is according to LPCM coding sample rate of the disc.

On Screed Display

English/French/Italian Select language display of DVD system

LogoType

Default Display the default logo type Captured Display the picture captured by customer.

AVN S9010/9020 V1 06/15 UK

90 • UK

Return to contents

AVN9010/20 V105.15

Audio (Speaker Setup page)

DOWNMIX Mode

LT/RT Dolby stereo, distributing the sound from the middle and surrounding sound channels to the left and right sound channels.

Stereo Output left and right sound channel signal while playing disc.

V Surr Left and right sound channel create surround sound eﬀect.

Oﬀ The audio output 5.1 channel signal (support 5.1 ch DVD disc only)

Dual Mono

Stereo/L-Mono/R-Mono/Mix-Mono (Choose dolby digital sound channel)

Prefer (Preference Page)

Note: Preference Set could be set only when there is no disc in the player.

TV Type Pal TV/Multi/NTSC TV Select video output format (NTSC is recommended)

Audio English/Chinese/French/Swedish/Italian/Russian/German/Spanish/Portuguese/others Select language for playing (Disc support is needed)

Subtitle English/Chinese/French/Swedish/Italian/Russian/German/Spanish/Portuguese/others Select language for playing (Disc support is needed)

Disc Menu Language

English/Chinese/French/Swedish/Italian/Russian/German/Spanish/Portuguese/others

Select language for playing (Disc support is needed)

Parental

1 KID SAF / 2 G / 3 PG / 4PG 13 / 5 PGR / 6R / 7NCI7 / 8 ADULT

Select display level

Default

Reset Resets the device to factory settings.

Password Setup Page

Password

Select sub-item “Change” in password options and press OK to enter password change page. As the right ﬁgure shows.

Enter old password /new password / conﬁrm PWD respectively and press OK.

Exit Press “EXIT” to exit setup menu.

Original PW : 1389

AVN S9010/9020 V1 06/15 UK

91 • UK

Return to contents

AVN9010/20 V105.15

Bluetooth Handsfree

The system provides bluetooth hands free communication option. If your mobile phone is bluetooth enabled, it can establish a point-to-point connection with the AVN S9010/20, providing telephone dial up and call answering Phonebook, * dependent of telephone model

* Note: * The bluetooth module is compatible with most mobile phones. Some mobile phones and/or functions are not compatible with the AVN S9010/20.

1. Enter/Exit

Touch

to enter bluetooth main interface.

Touch

icon to exit from bluetooth interface.

2. Pair/Connect

Before using the Bluetooth hands free function the AVN S9010/20 and the mobile phone must be ‘paired’. To pair the AVN S9010/20 and mobile phone press

icon

Bluetooth main interface (as ﬁgure shown).

Touch

open the bluetooth function of your mobile phone and enable the

bluetooth device search function, and “Matching” will be displayed on the screen.

After the connection has succeeded, the mobile phones will display the AVN name (Ample I).

While connecting, the mobile phone indicates the input device connection password. The device connection password can be seen on the screen (The default password is “1234” or “OOOO”). After matching, “Connected” will be displayed on the ‘LT’~ matched mobile phone model will be displayed on the screen automatically, and

will

be displayed on the upper right part of the screen.

Settings

Edit device name or Pin number. Enter new device name or pin number then press Enter to conﬁrm - see page 90

for details

For automatic connection, if pairing succeeds, the connection can be reestablished automatically after the AVN is

oﬀ; and the connection can be reestablished automatically after several seconds if the connection is oﬀ.

Automatically answer means at connection mode , after the AVN displays incoming call’, after three rings the call

will be answered automatically.

AVN S9010/9020 V1 06/15 UK

92 • UK

Return to contents

AVN9010/20 V105.15

3. Modify the name and password

On the setup interface, touch the

icon to enter the modify interface.

Touch

. Items to be modiﬁed are shown in the display box on the right screen,

you can enter the new character by means of a keyboard, click the icon to conﬁrm

the operation.

If input error, press the

icon to delete it.

Press the

icon to exit.

The method of modifying the password is similar to the method of modifying the name.

4. Dialling

You can dial number using the telephone keypad mobile phone or enter telephone number on the number button on the AVN screen.

Press number button to enter desired number, the entered number is displayed on the top line. To correct a wrongly inputted number press the

to delete one by one.

Once the correct number has been entered press to call the number

Touch

to end the call

5. Answer the Phone

When an incoming call is received the AVN will automatically switch from is current mode to the Bluetooth interface.

Press

or to choose to answer or refuse.

If “answer” is set up for: “automatically answer” , after three rings the call will be answered automatically.

The incoming number will be displayed in the number line.

Pairing is OK

AVN S9010/9020 V1 06/15 UK

93 • UK

Return to contents

AVN9010/20 V105.15

6. Phonebook

Touch

icon

Phonebook image appears. The phonebook displays incoming calls, received calls, and missed numbers (It displays 5 most recent calls in each category).

Choose the number you want to dial then press

To access numbers in the SIM card phonebook, press

To scroll up and down through the phonebook pages use

Not all models of mobile phone are campatible with this feature

To access the phonebook on the mobile phone press

To refresh the phonebook content press

7. Call Logs

Click on

to enter the phone log interface .

This interface displays the following information

 Address book  Dialled calls  Missed calls  Received calls

Click on a dailled, missed or recived call then click

to dial.

Press

to scroll through the list.

8. Bluetooth playback

If your mobile phone supports it you can playback music from your mobile via the AVN unit using Bluetooth.

In the Bluetooth menu press

.

Play/Pause Stop

Previous Track Next Track

AVN S9010/9020 V1 06/15 UK

94 • UK

Return to contents

AVN9010/20 V105.15

iPod Function Operation

When the unit is connected to an external iPod player, the audio and video ﬁles stored in iPod can be played back.

1. Enter/Exit

Touch

to access ipod main interface.

Touch the “MAIN” icon to return to the home page interface, and touch other function icon to exit.

Note If the iPod is connected when the AVN is switched On the iPod may not be recognized by the AVN unit. To establish a connection switch the AVN oﬀ then back On again while the iPod is connected.

2. Description of Touch Button

Enter iPod menu Pop up/hide the number pad

Play/Pause Switch to video playback

Next Track Repeat the current played song

Previous Track Page Up

Play songs at random Page Down

3. Main Menu

Touch

to return to the previous menu.

The system classiﬁes ﬁles according to the above-mentioned 6 types and stores ﬁles in the corresponding folders. Click to open a folder and play the ﬁrst ﬁle.

Click on the arrows to scroll the directory

4. Audio File playing

Touch the song title/name to directly play the song

Touch

to select previous/next song.

5. Playing Information

Touch

and the play information

will be displayed in the box on the right:

Directory name

0. NO iPod

1. Playlists ...................Playlists

2. Artists .....................Artists

3. Albums ...................Albums

4. Genres ....................Genres

5. All Music ..................All Music

6. Video ......................Video

Current track/Total current folder’s track number

Play/pause

Song name

Artist

Album

Current track

playing time

All tracks

Playing time

AVN S9010/9020 V1 06/15 UK

95 • UK

Return to contents

AVN9010/20 V105.15

6. Video File Playing

Touch

to play back video ﬁles from the iPod

* Most models of Ipod are compatible with AVN S9010/20 but not all functionality can be guaranteed.

Note: When selecting the video play, you should switch to iPod Video settings to ‘TV Out’ to On or ask. For detailed iPod operation, please refer to the iPod player manual.

AV Function Operation

Located on the rear of the AVN unit, there are muti -functional compound connection A and D. For connecting external audio video (AV) sources such a games consoles, video or DVD player.

Press the “MAIN” icon to enter home page interface, and touch to enter AV main interface.

Press the “MAIN” icon to enter home page interface, and touch other function icon to exit from the AV function status.

Note: Both the A and D interfaces of multi-function interfaces on the rear of the AVN unit can be used as AV input interface, but only one input source can be used at once. When both the A and D interfaces are not connected to other device, please select A interface prior to B when selecting AV input; otherwise, AV input will be disabled.

Auxiliary Function (AUX)

1. Enter/Exit

From the main menu press the

A

E

B

F

C

G

D

AVN S9010/9020 V1 06/15 UK

96 • UK

Return to contents

AVN9010/20 V105.15

Rear Zone Function Operation

The AVN S9010/20 has a dual zone function. Dual Zone allows the front and rear passengers to listen to music or watch video from diﬀerent sources. EG the driver and front passenger can listen to the radio and the rear passengers can watch a DVD.

Additional rear screens and headsets are required (not supplied).

1. Enter/Exit

Open the touch menu and press

to enter the rear zone interface while in any

playing status.(except NAY)

Touch “exit” icon to exit.

2. Operation

Touch one of the “TV/AV/DVD” icon to select the rear zone media playing source.

Note TV function is not available on the AVN S9010/20 unit.

Camera Function Operation

On this mode, if a rear camera connected, you can view the picture from the rear camera.

On the main menu, touch the icon

to enter the rear camera interface

Touch the icon “Main” to enter main menu, touch other function icon to enter the corresponding interface.

For automatic selection of the rear camera, when reverse gear is entered, the Orange ‘back wire’ needs to be connected - see page P6

Button Background Adjustment

Enter “System setting” menu, and touch L.SET character to change the background colour of the panel buttons.

Numerical value of red, green, blue can be adjusted to change LED colour of the panel, Click

icon to adjust.

Operate the direction cursor to move the light ring to select the background colour.

Touch directly to select background colour, and click

to store the selected background colour.

AVN S9010/9020 V1 06/15 UK

97 • UK

Return to contents

AVN9010/20 V105.15

System Set Up

Basic Operation of Setup Menu

1. Enter/Exit

Press the screen to open the touch menu.

Press the “MAIN’ icon to enter home page interface, and touch

to enter

system setting main interface.

ON OFF

Touch

icon to exit the current menu.

2. System Setup

Touch

to enter system settings. Touch icon to exit.

3. Time Setup

Touch TIME DISP

/ icon to turn on/oﬀ time display function,

the time will displayed on the lower right corner of the screen.

4. Spectrum Display

Touch SPECTRUM

/ icon to turn on/oﬀ spectrum display

function.

5. Rear Camera Function (optional)

Touch BACK

/ icon to turn on/oﬀ reverse function. If a rear camera is ﬁtted this will switch the rear camera auto switch , when reverse gear is selected, on and oﬀ.

The product has the second generation IPAS which results in a clearer image, and reversing will be safer. Snooper recommends cameras which are supplied by ourselves, these cameras have been tested and are fully compatible with the AVN S9010/20. Once the camera has been installed you will need to select ‘Back’ to switch this function On. When you reverse your vehicle, the rear image will be displayed on the screen.

AVN S9010/9020 V1 06/15 UK

98 • UK

Return to contents

AVN9010/20 V105.15

6. Key sound

Touch BEEP

/ icon to turn on/oﬀ the touch screen ‘beep’ sound

eﬀect

7. Audio navigation

Touch NAV AUDIO

/ icon to turn on/oﬀ Audio Navigation.

If On, this allows the navigation voice prompts be heard through the front two speakers, muting the original audio source.

8. Video navigation

Touch NAV VIDEO

/ icon to turn on/oﬀ Video Navigation.

If On, this allows the navigation prompts to interrupt the original video source.

9. Interface colours

Touch

or to change the colour scheme of the user interface

Video Setup

Touch icon to enter audio settings.

Touch

to adjust the brightness, chroma and contrast of the image.

Press

to change the colour mode.

Audio Setup

Click icon to enter audio settings.

Press icon

to adjust the tone.

Touch the icon

to revert the devive to the default settings.

Press

to adjust the equiliser mode between Flat, Customised, Pop, Classic, Jazz and Rock.

AVN S9010/9020 V1 06/15 UK

99 • UK

Return to contents

AVN9010/20 V105.15

Touch the icon to enter the balance/fade setup interface.

Press the

to adjust the left to right balance and the front to rear fade.

To revert to factory default press

Press

icon to exit.

Note “Center volume” adjustment is available only when 5.I-channel is on. Only with playback of a disc with 5.1ch encoding can you turn on and setup this feature. When playing a CD ,MP3 disc, please turn oﬀ 5.1ch.

Time Setup

Touch the icon to enter the time setup interface.

Press

to change the time zone

Press the up or down arrow to adjust the Year, Month, Day, Hours or Minute

Press 24H to choose 24 hour format

Press RDS SYNC to synchronize the clock using the radio tuner RDS.

Press NAV SYNC to synchronise the clock using GPS.

AVN S9010/9020 V1 06/15 UK

100 • UK

Return to contents

AVN9010/20 V105.15

Control Calibration

Press to enter control calibration. Touch “exit” icon to exit.

The AVN can be controlled by the vehicles multi-function steering wheel (where ﬁtted) but the AVN controls must be calibrated with the corresponding functions on the steering wheel.

NOTE: not all vehicle steering wheel controls are compatible with the AVN

To calibrate the steering wheel controls follow these steps:

1. Press ‘Start’

2. Touch any key on the screen to start the test

3. Press the button on the AVN then press the corresponding button on the steering wheel

4. After the AVN has ‘learnt’ the ﬁrst function you will be prompted to initiate the next function to be programmed. Once all of the steering wheel functions have been successfully programmed press ‘End’

NOTE: the steering wheel control cable must be connected for this function to operate (see page 6)

Touch Screen Calibration

Occasionally the AVN screen may need calibrating.

To recalibrate the screen press

to enter touch calibration

Press OK to start the calibration then click the ‘+’ on the screen in this order:

Once calibration has been completed click anywhere on the screen to exit.

Main menu shortcuts

The shortcut menu bar, at the base of the screen, can be customised.

A maximum of seven shortcuts can be displayed on the shortcut menu bar.

Click

to enter the shortcut interface.

To add a shortcut to the menu bar simply click on the icon and drag it on to the menu bar.

If there are already seven items on the shortcut bar you will need to remove one item before you can add another. To remove a shortcut just press on the item, you want to remove, in the menu bar and drag the iocn onto the main screen.

1

2

3

4

5

AVN S9010/9020 V1 06/15 UK

Snooper AVN S9010/20 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual