snom PA1 User Manual

Snom PA1

data sheet

Snom PA1

Key Features

· Public announcement system for office floors,
reception areas and waiting rooms

· Announcements in airports, trains and bus stations,
and waiting lounges

· Monitoring of security-sensitive environments like
entrances or reception areas

· SIP

· Multicast

· Remote maintenance

The audio announcement system Snom PA1 augments
your existing SIP PBX with another component of mod­ern communication. The PA1 unites the functions of a
telephone with a high-performance digital amplifier
for broadcasting announcements and supplying back­ground music to assigned rooms, hallways, and office
floors.

An announcement via PA1 is effected simply by initiat­ing a call from a SIP telephone with its handset, head­set, or via handsfree mode. An efficient 4 Watt amplifier
provides sufficient coverage for the entire room or floor
space.

If a network video camera is connected to the PA1
( ethernet switch), images of the highest quality are
transmitted to monitors located in other rooms or on
other floors.

Several PA1 units can be connected to each other via
the built-in switch. It also can be optionally installed on
walls or ceilings.

The PA1 can be power-fed either via conventional power
supply unit connection or through Power-over-Ethernet
(PoE). The settings of individual PA1 control systems can
be centrally configured via the device’s web interface.

Aside of the leading SIP protocol, the PA1 can also be
addressed via Multicast, thus enabling one transmit­ter to simultaneously address many receivers. As with
all other snom terminals, updates and configuration
changes for the PA1 can be centrally effected over the
server.

For maintenance purposes, the PA1 has two 3.5 mm

jacks for headset and microphone connection. Four out­put pins can be controlled either via web interface or
DTMF.

technical data

General information

· Voltage feed via network (PoE): IEEE 802.3af, class 3

· Ethernet: 2 x IEEE 802.3, 10/100 Mbps switch

· SIP communication + Multicast

· Central configuration and maintenance

· Web interface menu

· Remote volume configuration

· 4 Watt power amplifier, class D (loudspeaker not included)

· Key for announcement of IP address and for resetting

· 2 LED status indicators

· For maintenance purposes: two 3.5 mm jacks for headphone and microphone connection

· 4 output pins controlled via web interface or DTMF

· Robust housing for wall-mount

Delivery contents

· Base unit

· Brackets, screws and expansion anchors for wall mounting

· Drill template

· Wire set

Version 2.0.2 / en / 04 · 2017
Copyright 2017 Snom Technology GmbH. All rights reserved.

Snom is a registered trademark of Snom Technology GmbH and its aliates in the European Union, USA, Japan, China and certain other countries and regions.
Unless specied otherwise, all trademarks, in particular product names, are legally protected trademarks of Snom Technology GmbH. Other mentioned trade­marks or registered trademarks are the property of their respective manufacturers or owners. Product specications are subject to change without notice.

We do not accept liability for printing errors and mistakes. snom.com