
F REQUENTLY
A SKED
Q UESTION
Conguring snom 100/snom
200 for TEDAS Server
Date: Sep-12-2002
Author: Ahmar Ghaffar
Document: faq-02-09-12-ag

2 snom technology AG
[ F R E Q U E N T L Y A S K E D Q U E S T I O N ]
Con guring snom 100/snom 200 for TEDAS Server 3
[ F R E Q U E N T L Y A S K E D Q U E S T I O N ]
The snom100/snom200 phones are completely interoperable with the TEDAS Phoneware
Server. This is a quick installation guide for getting the best performance out of snom phones
with the TEDAS Phoneware Server. Before we jump to the snom100/snom200 settings for
TEDAS Server, here is a quick Installation guide for the TEDAS Server:
Requirements for TEDAS Phoneware Server
1. Computer with Pentium III 800 MHz processor
2. 128 MB RAM
3. 140 MB Hard disk space
4. Windows NT 4.0 Server with Service Pack 5 and Option Pack 4, Windows 2000 (or
Windows 2000 Advanced Server)
5. Microsoft IIS (for web administration)
6. Single Network Card (NIC) with a static IP address
Installation of TEDAS Phoneware Server
Insert your TEDAS Phoneware Server CD-ROM. The installation program will launch
automatically. Select "Install Phoneware Server" from the menu. If some of the les on the
system need to be updated, the program will prompt this. Click on "Yes" to perform the update.
The license key is mentioned in the readme.txt at the CD root. Please cut and paste this. From
the Central/Distributed Installation option select "Central Installation". If you encounter any
problems during the installation please refer to the TEDAS Phoneware Server manual.