Page 1
Parts Manual fo
r
V
V
V
CLASSIC SERIES WALK-BEHIND
LEAF BLOWER
SERIES 1 & 2
MODEL
LBC6151B
LBC6152B
SLBC55151B
COPYRIGHT ©2005
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
Revision IR,
McDonough, GA, 30253 U.S.A.
10/10/2005
Manual No. 7006182
TP 400-5082-IR-BL-N
Page 2
Page 3
s
PAGE GROUP
4
8
12
SLBC BLOWER ASSY (Series 1)
BLOWER ASSEMBLY (Series 1)
BLOWER ASSEMBLY (Series 2)
Table Of Content
SERIES 1 & 2
Manual No. 7006182CLASSIC SERIES WALK-BEHIND
3
TP 400-5082-IR-BL-N
Page 4
SLBC BLOWER ASSY (Series 1)
Manual No. 7006182 CLASSIC SERIES WALK-BEHIND
TP 400-5082-IR-BL-N
4
SERIES 1 & 2
Page 5
SLBC BLOWER ASSY (Series 1)
p
y
Part No Descri
1 3010003 1 WELDMENT, Base & Housing, 52 Classic
2 7043287 1 WELDMENT, Steel Impeller, 4 Blade, 15.00 O.D. replaces 3021506
3 7090167 1 SCREW, 3/8-24 x 2” Hex Head Cap, GR 5
4 3020234 1 WELDMENT, Intake Baffle
5 7091318 8 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5
6 7091315 12 WASHER, 5/16” Split
7 3024507 1 DEFLECTOR, Side Air
8 7090188 8 WASHER, .34 x .69 x .08 Flat
9 7013010 1 DECAL, Danger, Cut Finger (CPSC)
10 3024508 1 WELDMENT, Door Front/Side Discharge includes a free-spinning bronze
11 7091495 1 SCREW, 1/4-20 x 3/4” Hex Head Cap, GR 5
12 7027223 1 WASHER, .263 x .375 x .062 Split Lock
13 3031014 1 BUSHING, Steel .250 I.D. x .375 O.D. x .25 long
14 3071782 1 SPRING, Extension
15 3031103 1 KNOB, #230 Dimco (3/8-16 thread)
16 3033001 2 *ASSY, Wheel & Tire, Sawtooth 4.10/3.50-4 Kenda
-- 3033107 -- BALL BEARING, 5/8 x 1-3/8” included with item 16
17 7091628 2 WASHER, .64 x .99 x .05 Flat
18 7012763 2 RING, External Retaining Truarc 1500-62
19 3033017 1 WHEEL, 6.00 x 1.50 Semi-Pneumatic
20 3033101 1 BRACKET, Caster- RH
21 3033102 1 BRACKET, Caster- LH
22 7091501 1 SCREW, 3/8-16 x 2-1/2” Hex Head Cap, GR 5
23 7091585 1 NUT, 3/8-16 Hex Center Lock, GR 5 or B
24 7075760 1 DECAL, SNAPPER
25 7075893 1 DECAL, Personal Protection
26 3023270 1 ASSEMBLY, Upper Handle & Grip- Narrow (part # 7033876 + grip)
27 7074422 1 GRIP, 1.0 x 21-1/2” Foam
28 7033877 1 HANDLE, Lower Folding, Narrow, Blower
29 7091908 4 SCREW, 5/16-18 x 1-3/4” Hex Heasd Cap, GR 5
30 7091298 4 NUT, 5/16-18 Hex Nyloc
31 3039112 1 *ENGINE, 6HP B&S Intek (not shown) Mod. 121212-0110-E1
32 7033874 1 DECAL, Danger, Flying Material
33 7033686 1 DECAL, Leaf Blower Warning
34 7091540 4 SCREW, 5/16-18 x 1-1/2” Hex Head Cap, GR 5
tionItem Qt
Note
bushine (3031220)
Footnotes:
*Includes tire, rim, air valve, grease fitting & 2 ball bearings.
*See your local Briggs distributor for engine service parts.
Manual No. 7006182CLASSIC SERIES WALK-BEHIND
SERIES 1 & 2
5
TP 400-5082-IR-BL-N
Page 6
SLBC BLOWER ASSY (Series 1)
Manual No. 7006182 CLASSIC SERIES WALK-BEHIND
TP 400-5082-IR-BL-N
6
SERIES 1 & 2
Page 7
SLBC BLOWER ASSY (Series 1)
p
y
Part No Descri
35 7091601 4 NUT, 5/16-18 Hex Flange Lock, GR 5
36 7090517 1 WASHER, 3/8” Flat not shown
37 7010210 1 KEY, 1/4” Square x 2”
38 7012063 1 WASHER, .411/.406 I.D. Cone
39 7091962 1 WASHER, .468 x 1.625 x .25 Flat
40 3079214 1 DECAL, 5.5 HP B&S (not shown) B&S p/n 274582
41 7091189 4 BOLT, 5/16-18 x 2” Curved Head Square Neck
42 7090391 4 WASHER, 5/16” Internal Tooth Lock
43 3071776 4 KNOB, Fluted (5/16-18 thread)
44 7046465 1 ROPE GUIDE (1/4-20 thread)
45 7090372 1 NUT, 1/4-20 Hex Center Lock, GR 5 or B
46 3071800 1 THROTTLE CONTROL, B&S, 35.00/1.62 part # is stamped on part
47 7090505 1 SCREW, 1/4-20 x 2” Hex Head Cap, GR 5
48 7076978 1 NUT, 1/4-20 Hex Nyloc
49 1717312 4 WASHER, 5/16” Curved
tionItem Qt
Note
Footnotes:
*Includes tire, rim, air valve, grease fitting & 2 ball bearings.
*See your local Briggs distributor for engine service parts.
Manual No. 7006182CLASSIC SERIES WALK-BEHIND
SERIES 1 & 2
7
TP 400-5082-IR-BL-N
Page 8
BLOWER ASSEMBLY (Series 1)
Manual No. 7006182 CLASSIC SERIES WALK-BEHIND
TP 400-5082-IR-BL-N
8
SERIES 1 & 2
Page 9
BLOWER ASSEMBLY (Series 1)
p
y
Part No Descri
1 3010003 1 WELDMENT, Base & Housing, 52 Classic
2 7043287 1 WELDMENT, Steel Impeller, 4 Blade, 15.00 O.D. replaces 3021506
3 7090167 1 SCREW, 3/8-24 x 2” Hex Head Cap, GR 5
4 3020234 1 WELDMENT, Intake Baffle
5 7091511 8 NUT, 5/16-18 Hex, GR 5 or B
6 7091315 8 WASHER, 5/16” Split
7 3024507 1 DEFLECTOR, Side Air
8 7090188 6 WASHER, .34 x .69 x .08 Flat
9 7013010 1 DECAL, Danger, Cut Finger (CPSC)
10 3024508 1 WELDMENT, Door Front/Side Discharge includes a free-spinning bronze
11 7091495 1 SCREW, 1/4-20 x 3/4” Hex Head Cap, GR 5
12 7027223 1 WASHER, .263 x .375 x .062 Split Lock
13 3031014 1 BUSHING, Steel Sleeve .250 I.D. x .375 O.D. x .25 long
14 3071782 1 SPRING, Extension was 3024502
15 3031103 1 KNOB, #230 Dimco (3/8-16 thread) or 7012659
16 3033001 2 *ASSY, Wheel & Tire, Sawtooth 4.10/3.50-4 Kenda
-- 3033107 -- BALL BEARING, 5/8 x 1-3/8” included with item 16
17 7091628 2 WASHER, .64 x .99 x .05 Flat
18 7012763 2 RING, External Retaining Truarc 1500-62
19 3033017 1 WHEEL, 6.00 x 1.50 Semi-Pneumatic
20 3033101 1 BRACKET, Caster- RH
21 3033102 1 BRACKET, Caster- LH
22 7091501 1 SCREW, 3/8-16 x 2-1/2” Hex Head Cap, GR 5
23 7091585 1 NUT, 3/8-16 Hex Center Lock, GR 5 or B
-- 3033003 1 ASSEMBLY, Front Caster (incl. items 19 thru 23)
24 7075760 1 DECAL, SNAPPER
25 7075893 1 DECAL, Personal Protection
26 3023270 1 ASSEMBLY, Upper Handle & Grip- Narrow (part # 7033876 + grip)
27 7074422 1 GRIP, 1.0 x 21-1/2” Foam
28 7033877 1 HANDLE, Lower Folding, Narrow, Blower
29 7091908 4 SCREW, 5/16-18 x 1-3/4” Hex Heasd Cap, GR 5 not used on units with vibration
30 7091298 4 NUT, 5/16-18 Hex Nyloc
31 3039112 1 *ENGINE, 6HP B&S Intek, 1” Horozontal Shaft (not shown) Mod. 121212-0110-E1
32 7033874 1 DECAL, Danger, Flying Material
33 7033686 1 DECAL, Leaf Blower Warning
tionItem Qt
Note
bushine (3031220)
mounts
Footnotes:
*Includes tire, rim, air valve, grease fitting & 2 ball bearings.
*See your local Briggs distributor for engine service parts.
Manual No. 7006182CLASSIC SERIES WALK-BEHIND
SERIES 1 & 2
9
TP 400-5082-IR-BL-N
Page 10
BLOWER ASSEMBLY (Series 1)
Manual No. 7006182 CLASSIC SERIES WALK-BEHIND
TP 400-5082-IR-BL-N
10
SERIES 1 & 2
Page 11
BLOWER ASSEMBLY (Series 1)
p
y
Part No Descri
34 7091540 4 SCREW, 5/16-18 x 1-1/2” Hex Head Cap, GR 5
35 7091601 8 NUT, 5/16-18 Hex Flange Lock, GR 5
36 7090517 1 WASHER, 3/8” Flat not shown
37 7010210 1 KEY, 1/4” Square x 2”
38 7012063 1 WASHER, .411/.406 I.D. Cone
39 7091962 1 WASHER, .468 x 1.625 x .25 Flat
40 3032160 4 MOUNT, Vibration (5/16-18 threads, both ends)
41 7091189 4 BOLT, 5/16-18 x 2” Curved Head Square Neck, GR 2
42 7090391 4 WASHER, 5/16” Internal Tooth Lock
43 3071776 4 KNOB, Folding Handle
44 7046465 1 ROPE GUIDE (1/4-20 thread)
45 7090372 1 NUT, 1/4-20 Hex Center Lock, GR 5 or B
46 3071800 1 THROTTLE CONTROL, B&S, 35.00/1.62 part # is stamped on part
47 7090505 1 SCREW, 1/4-20 x 2” Hex Head Cap, GR 5
48 7076978 1 NUT, 1/4-20 Hex Nyloc
49 1717312 4 WASHER, 5/16” Curved
tionItem Qt
Note
Footnotes:
*Includes tire, rim, air valve, grease fitting & 2 ball bearings.
*See your local Briggs distributor for engine service parts.
Manual No. 7006182CLASSIC SERIES WALK-BEHIND
SERIES 1 & 2
11
TP 400-5082-IR-BL-N
Page 12
BLOWER ASSEMBLY (Series 2)
Manual No. 7006182 CLASSIC SERIES WALK-BEHIND
TP 400-5082-IR-BL-N
12
SERIES 1 & 2
Page 13
BLOWER ASSEMBLY (Series 2)
p
y
Part No Descri
1 7043239 1 WELDMENT, Base & Housing, 52 Classic
2 7043287 1 WELDMENT, Steel Impeller, 4 Blade, 15.00 O.D.
3 7090167 1 SCREW, 3/8-24 x 2” Hex Head Cap, GR 5
4 3020234 1 WELDMENT, Intake Baffle
5 7091525 4 BOLT, 5/16-18 x 1/2” Hex Flange Lock
6 7091315 4 WASHER, 5/16” Split
7 3024507 1 DEFLECTOR, Side Air
8 7090188 4 WASHER, .34 x .69 x .08 Flat
9 7013010 1 DECAL, Danger, Cut Finger (CPSC)
10 7078161 1 DOOR, Forward Air Control
11 7091530 2 BOLT, 1/4-20 x 3/4” Short Square Neck, GR 5
12 7091584 2 NUT, 1/4-20 Hex Flange Lock, GR 5
13 7078169 2 BEARING, 3/8 Clip
14 3071782 1 SPRING, Extension
15 3031103 1 KNOB, #230 Dimco (3/8-16 thread)
16 3033001 2 *ASSY, Wheel & Tire, Sawtooth 4.10/3.50-4 Kenda
-- 3033107 -- BALL BEARING, 5/8 x 1-3/8” included with item 16
17 7091628 2 WASHER, .64 x .99 x .05 Flat
18 7012763 2 RING, External Retaining Truarc 1500-62
19 3033017 1 WHEEL, 6.00 x 1.50 Semi-Pneumatic
20 3033101 1 BRACKET, Caster- RH
21 3033102 1 BRACKET, Caster- LH
22 7091501 1 SCREW, 3/8-16 x 2-1/2” Hex Head Cap, GR 5
23 7091585 1 NUT, 3/8-16 Hex Center Lock, GR 5 or B
-- 3033003 1 ASSEMBLY, Front Caster (incl. items 19 thru 23)
24 7075760 1 DECAL, SNAPPER
25 7075893 1 DECAL, Personal Protection
26 3023270 1 ASSEMBLY, Upper Handle & Grip- Narrow (part # 7033876 + grip)
27 7074422 1 GRIP, 1.0 x 21-1/2” Foam
28 7033877 1 HANDLE, Lower Folding, Narrow, Blower
29 7078163 1 ROD, Door Front/Side Discharge
30 7091298 4 NUT, 5/16-18 Hex Nyloc
31 3039112 1 *ENGINE, 6HP B&S Intek, 1” Horozontal Shaft (not shown) Mod. 121212-0110-
32 7033874 1 DECAL, Danger, Flying Material
33 7033686 1 DECAL, Leaf Blower Warning
tionItem Qt
Note
E1
Footnotes:
*Includes tire, rim, air valve, grease fitting & 2 ball bearings.
*See your local Briggs distributor for engine service parts.
Manual No. 7006182CLASSIC SERIES WALK-BEHIND
SERIES 1 & 2
13
TP 400-5082-IR-BL-N
Page 14
BLOWER ASSEMBLY (Series 2)
Manual No. 7006182 CLASSIC SERIES WALK-BEHIND
TP 400-5082-IR-BL-N
14
SERIES 1 & 2
Page 15
BLOWER ASSEMBLY (Series 2)
p
y
Part No Descri
34 7091540 4 SCREW, 5/16-18 x 1-1/2” Hex Head Cap, GR 5
35 7091601 8 NUT, 5/16-18 Hex Flange Lock, GR 5
36 7091318 4 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5
37 7010210 1 KEY, 1/4” Square x 2”
38 7012063 1 WASHER, .411/.406 I.D. Cone
39 7091962 1 WASHER, .468 x 1.625 x .25 Flat
40 3032160 4 MOUNT, Vibration (5/16-18 threads, both ends)
41 7091189 4 BOLT, 5/16-18 x 2” Curved Head Square Neck, GR 2
42 7090391 4 WASHER, 5/16” Internal Tooth Lock
43 3071776 4 KNOB, Folding Handle
44 7046465 1 ROPE GUIDE (1/4-20 thread)
45 7090372 1 NUT, 1/4-20 Hex Center Lock, GR 5 or B
46 3071800 1 THROTTLE CONTROL, B&S, 35.00/1.62 part # is stamped on part
47 7090505 1 SCREW, 1/4-20 x 2” Hex Head Cap, GR 5
48 7076978 1 NUT, 1/4-20 Hex Nyloc
49 1717312 4 WASHER, 5/16” Curved
50 7091908 4 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5
tionItem Qt
Note
Footnotes:
*Includes tire, rim, air valve, grease fitting & 2 ball bearings.
*See your local Briggs distributor for engine service parts.
Manual No. 7006182CLASSIC SERIES WALK-BEHIND
SERIES 1 & 2
15
TP 400-5082-IR-BL-N
Page 16
Page 17
Page 18
Parts Manual fo
r
CLASSIC SERIES WALK-BEHIND
LEAF BLOWER
SERIES 1 & 2
RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS
COPYRIGHT ©2005
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS
WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE
AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE
SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
McDonough, GA, 30253 U.S.A.
Revision IR,
10/10/2005
Manual No. 700618 2
TP 400-5082-IR-BL-N
Loading...