Smeg STU1846 Instructions Manual
DISHWASHER
IINNSSTTAALLLLAATTIIOONN IINNSSTTRRUUCCTTIIOONNSS
CONTENTS
EN
Contents
CONTENTS
EN
1 INTRODUCTION ....................................................................................... 3
2 SAFETY INFORMATION ............................................................................ 5
3 INSTALLATION MATERIAL ......................................................................... 8
3.1 Kit supplied with dishwasher (models sta_4645/sta_8743) ......................... 9
3.2 Kit supplied with dishwasher (models pla_8743) .......................................10
4
5
5.1
5.1.1
5.1.2
5.2
5.2.1
5.2.1.1
5.2.1.2
5.2.2
5.3
5.3.1
5.3.2
DIMENSIONS OF DISHWASHER ............................................................. 10
INSTALLATION AND HOOK-UP ...............................................................11
Leveling ....................................................................................................12
Mounting the feet (only for some models) .................................................12
Levelling the appliance ............................................................................. 13
Connections .............................................................................................14
Connecting to the water supply ................................................................ 15
Connecting to the water tap ..................................................................... 16
Connecting the drain hose .......................................................................18
Electrical connections and warnings .........................................................23
Commissioning ........................................................................................24
Installation procedure (all models) ............................................................. 24
Procedure for mounting the door panel (models sta_4645/sta_8743)........ 26
5.3.3
5.4
1
Completion of installation (all models).................... .....................................30
Testing ..................................................................................................... 33
EN
2
INTRODUCTION
EN
INTRODUCTION
1 INTRODUCTION
EN
Thank you for choosing one of our products. To install this dishwasher correctly and safely, please read this manual carefully. The
manual is divided into sections giving you a step-by-step guide to
installation of the appliance. The texts are easy to understand and
are complete with detailed illustrations. This user-friendly manual will
provide answers to all your questions about installation of the dishwasher.
This manual comprises the following sections:
INTRODUCTION: general information about the manual.
WARNINGS: a list of warnings concerning safety during installation.
INSTALLATION INSTRUCTIONS: for the qualifi ed technician who
must carry out the installation, hook-up and testing of the appliance.
Nomenclature of fi gures and tables:
The progressive number of each fi gure is shown in the bottom righthand corner of the relative box. An example of a progressive number
is “Fig. 4-01”, where the fi rst number (4) indicates the section to
which the fi gure belongs, while the second number (01) indicates
the progressive number of the fi gure in section 4 (Fig. 4-01 is the
fi rst fi gure in section 4). The tables are numbered in the same way,
bearing in mind that “Tab.” is used instead of “Fig.” (e.g.: Tab. 4-01
is the fi rst table in section 4). If a table occupies more than one page,
a letter is added after the progressive number (e.g.: “Tab. 4-01a”,
Tab. 4-01b”).
3
INTRODUCTION
Symbols used in this manual
EN
DANGER. This symbol highlights information and warnings which,
if not observed, may compromise personal safety or damage the
appliance.
DANGER OF ELECTROCUTION. This symbol highlights information
and warnings of an electrical nature which, if not observed, may
compromise personal safety or damage the appliance.
This symbol highlights general information and warnings.
INTRODUCTION
(see tab. 1-01)
Tab. 1-01
4
WARNINGS
EN
WARNINGS
2 SAFETY INFORMATION
THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE
AND MUST THEREFORE BE KEPT INTACT TOGETHER WITH THE
MACHINE. BEFORE USING THE APPLIANCE, CAREFULLY READ
ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL. INSTALLATION MUST BE PERFORMED BY A QUALIFIED TECHNICIAN,
IN COMPLIANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USE, AND COMPLIES
WITH THE DIRECTIVES CURRENTLY IN FORCE, INCLUDING THE
PREVENTION AND ELIMINATION OF RADIO FREQUENCY INTERFERENCE. THE APPLIANCE IS DESIGNED FOR THE FOLLOWING
PURPOSE: WASHING AND DRYING OF DISHES; ANY OTHER
USE SHALL BE CONSIDERED IMPROPER. THE MANUFAC-
TURER DECLINES ALL RESPONSIBILITY FOR USES OTHER
THAN THOSE DESCRIBED ABOVE.
INSTALLATION, REPAIRS AND SERVICING MUST BE PERFORMED BY QUALIFIED AND AUTHORIZED TECHNICIANS.
AS WELL AS INVALIDATING THE WARRANTY, WORK CARRIED
OUT BY UNAUTHORIZED PERSONS MAY GENERATE HAZARDS.
INSTALLATION MUST BE PERFORMED IN COMPLIANCE WITH
ALL THE DIRECTIVES IN FORCE IN THE COUNTRY OF INSTALLATION AND, IF THESE DO NOT EXIST: IN THE UNITED STATES THE
NATIONAL ELECTRIC CODE; IN CANADA THE CANADIAN ELECTRIC CODE C22.1 - LATEST EDITION/PROVINCIAL AND MUNICIPAL CODES AND/OR LOCAL CODES.
EN
THE NAME PLATE FEATURING THE TECHNICAL DATA, SERIAL
NUMBER AND MARKINGS IS VISIBLY POSITIONED ON THE INNER EDGE OF THE DOOR. THE NAMEPLATE ON THE INNER
EDGE OF THE DOOR MUST NEVER BE REMOVED.
THIS APPLIANCE IS NOT SUITABLE FOR USE ON BOATS, CARAVANS OR THE LIKE. DISHWASHERS CERTIFIED FOR DOMESTIC
USE ARE NOT SUITABLE FOR AUTHORISED FOOD FACTORIES.
CHECK THAT THE VOLTAGE, FREQUENCY AND PROTECTION OF
THE DOMESTIC MAINS POWER SUPPLY MATCH THE RATINGS
ON THE NAME PLATE OF THE APPLIANCE.
5
WARNINGS
EN
WARNINGS
TWO PEOPLE WEARING SAFETY GLOVES ARE REQUIRED
TO LIFT THE DISHWASHER.
DO NOT LEAVING DISCARDED PACKAGING MATERIALS UNSUPERVISED WITHIN THE HOME. SEPARATE THE VARIOUS PACKAGING MATERIALS AND TAKE THEM TO THE NEAREST SORTED
WASTE COLLECTION CENTRE. KEEP CHILDREN, PHYSICALLY
AND/OR MENTALLY IMPAIRED ADULTS, AND ANIMALS AWAY
FROM PACKAGING WASTE; DANGER OF SUFFOCATION.
BEFORE PROCEEDING WITH INSTALLATION, DISCONNECT THE
MAINS POWER SUPPLY FROM THE WORK AREA.
DURING INSTALLATION, TAKE CARE NOT TO INJURE YOURSELF
ON THE SHARP EDGES OF THE APPLIANCE; WEAR SAFETY
GLOVES.
THE APPLIANCE MUST BE PROVIDED WITH A GROUND CONNECTION IN ACCORDANCE WITH THE ELECTRICAL SAFETY
REGULATIONS IN FORCE. IF IN DOUBT, HAVE THE SYSTEM
CHECKED BY A QUALIFIED ELECTRICIAN.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR
DAMAGE TO PERSONS OR PROPERTY RESULTING FROM
THE FAILURE TO GROUND THE APPLIANCE OR FROM A DEFECTIVE GROUND CONNECTION.
DO NOT USE APPLIANCES WHICH HAVE BEEN DAMAGED DURING TRANSIT! IF IN DOUBT, CONSULT YOUR DEALER. THE APPLIANCE MUST BE INSTALLED AND CONNECTED IN ACCORDANCE
WITH THE INSTRUCTIONS PROVIDED BY THE MANUFACTURER
OR BY A QUALIFIED TECHNICIAN.
DO NOT OPERATE THE DISHWASHER UNLESS ALL THE OUTER
PANELS HAVE BEEN POSITIONED CORRECTLY.
IMMEDIATELY AFTER INSTALLATION, BRIEFLY TEST THE APPLIANCE FOLLOWING THE INSTRUCTIONS INDICATED BELOW. IF
THE DISHWASHER FAILS TO OPERATE CORRECTLY, DISCONNECT IT FROM THE ELECTRICAL POWER SUPPLY AND CALL THE
NEAREST TECHNICAL SERVICE CENTRE. DO NOT ATTEMPT TO
REPAIR THE APPLIANCE.
6
WARNINGS
EN
WARNINGS
DO NOT USE EXTENSION CORDS, ADAPTORS OR SHUNT CONNECTIONS IN ORDER TO AVOID THE POSSIBILITY OF OVERHEATING OR BURNING, WITH CONSEQUENT FIRE HAZARD.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAMAGE TO PERSONS, ANIMALS OR PROPERTY RESULTING FROM FAILURE TO OBSERVE THE ABOVE
PRECAUTIONS, FROM TAMPERING WITH EVEN A SINGLE
COMPONENT OF THE APPLIANCE, OR FROM THE USE OF
UNORIGINAL SPARE PARTS.
IF IN DOUBT ABOUT THE CONTENTS OF THIS MANUAL,
CONTACT THE TECHNICAL ASSISTANCE SERVICE.
EN
7
INSTALLATION INSTRUCTIONS
EN
INSTALLATION INSTRUCTIONS
3 INSTALLATION MATERIAL
To install the dishwasher correctly, the following materials are required:
Phillips screwdriver (ref. A fi g. 3-01);
•
•
•
•
•
•
•
•
•
•
spirit level (ref. B fi g. 3-01);
tape measure (ref. C fi g. 3-01);
compass saw (ref. D fi g. 3-01);
pencil (ref. E fi g. 3-01);
fi le (ref. F fi g. 3-01);
13 mm open-ended wrench (ref. G fi g. 3-01);
plumbing pliers (ref. H fi g. 3-01);
drill (ref. I fi g. 3-01);
safety gloves (ref. L fi g. 3-01).
B
A
C
E
G
I
D
F
H
L
Fig. 3-01
8
INSTALLATION INSTRUCTIONS
EN
INSTALLATION INSTRUCTIONS
3.1 Kit supplied with dishwasher
(models sta_4645/sta_8743)
The kit supplied with the dishwasher comprises:
•
adhesive steam guard (ref. A fi g. 3-02);
•
1 steel steam guard (ref. B fi g. 3-02);*
•
1 template for door panel (ref. C fi g. 3-02);
•
2 hooks for door panel (ref. D fi g. 3-02);
•
8 screws for securing the door panel hooks (ref. E fi g. 3-02);
•
2 screws for securing the door (ref. F fi g. 3-02);
•
2 screws for fi xing the dishwasher to the adjacent walls (ref. G fi g. 3-02);
•
2 screw caps (ref. H fi g. 3-02).
•
2 adjustment feet (only for some models) (ref. I fi g. 3-02);
•
2 nuts (only for some models) (ref. L fi g. 3-02);
•
2 washers (only for some models) (ref. M fi g. 3-02).
A
B
EN
C
E
F
L
I
•
* The adhesive protection is suitable for kitchens with worktops that do not allow the
steel protection to be fi xed with screws (e.g.:+ marble or masonry), but it can be also
used with other materials.
9
G
D
H
M
Fig. 3-02
Loading...