Smeg ST6120 product information sheet

Product Information Sheet

COMMISSION DELEGATED REGULATION (EU) 2019/2017

Supplier's name or trademark: SMEG

Supplier’s address: Via Leonardo da Vinci, 4 42016 Guastalla (RE) - Italy

Model identifier: ST6120

General product parameters:

Parameter Value Parameter Value

Rated capacity (ps) 12 Dimensions in cm

Height 82

Width 60

Depth 55

EEI 61.2 Energy efficiency class F

Cleaning performance index 1.125 Drying performance index 1.065

Energy consumption in kWh (per cycle), based on the eco programme using cold water fill. Actual energy consumption will depend on how the appliance is used.

1.010

Water consumption in litres (per cycle), based on the eco programme. Actual water consumption will depend on how the appliance is used and on the hardness of the water.

12.0

Programme duration (h:min) 3:15 Type built-in

Airborne acoustical noise emissions 50

Airborne acoustical noise emission class

Off-mode (W) (if applicable) 0.50

Standby mode (W) (if applicable)

0.50

Delay start (W) (if applicable) 2.00

Networked standby (W) (if applicable)

—

Minimum duration of the guarantee offered by the manufacturer: 24 months

Additional information:

Weblink to the supplier’s website, where the information in point 6 of Annex II to Commission Regulation (EU) 2019/2022 (1) (b) is found:

https://www.smeg.com/services/customer-service

Pa ge 1 / 1