SMEG KSET910, KSET610X, KSET910X User Manual [fr]
Instruction Manual
Cooker Hoods KSET610X // KSET910X
Manuel d’instructions
Hottes Aspirantes KSET610X // KSET910X
Manual de instrucciones
Campanas Extractoras KSET610X // KSET910X
Libretto istruzioni
Cappe Aspirante KSET610X // KSET910X
Gebruikshandleiding
Afzuigkappen KSET610X // KSET910X
Bedieningsanleitung
Dunstabzugshauben KSET610X // KSET910X
Руководство по эксплуатации
Âûòÿ æêà KSET610X // KSET910X
Manual de Instruções
Exaustores KSET610X // KSET910X
Bruksanvisning
Köksfläkt KSET610X // KSET910X
20/04/09
This apparatus has the marked CEE in conformity with Standard 2002/92/EC of the European
F
Parliament and the Council about remainers of electrical en electronic apparatuses. The correct
elimination of this product avoids negative consequences for the market and the health.
Symbol (In the product or in the documents that are included with it), indicates that it’s not
possible to be treated like domestic remainder. It’s necessary to give it in a collection point to
recycle electrical and electronic apparatuses. Get rid of it in accordance with the environmental
norms for remainders elimination. In order to obtain detailed information about the treatment,
recovery or recycling of this product, put yourselfe in contact with the city council, with the
elimination service of urban remainder or with the store where you acquired the product.
_____________________________________________________________________________________________________________________
Cet appareil porte le symbole du recyclage conformément à la Directive Européenne 2002/96/CE
concernant les Déchets d’Equipements Élctriques et Electroniques (DEEE ou WEEE). En
procédant correctement à la mise au rebut de cet appareil, vous contribuerez à empêcher toute
conséquence nuisible pour l’environnement et la snté de l’homme.
Le symbole présent sur l’appareil ou sur la documentation que l’accompagne indique que ce
produit ne peut en aucun cas être traité comme déchet ménager. Il doit par conséquent être remis
à un centre de collecte des déchets chargé du recyclage des équipementes électriques et
électroniques. Pour obtenir de plus amples détails au sujet du traitement, de la récupération et du
recyclage de cet appareil, veuillez vous adresser au bureau compétent de votre commune, à la
société de collecte des déchets ou directement à votre revendeur.
_____________________________________________________________________________________________________________________
Este aparato lleva el marcado CE en conformidad con la Directiva 2002/96/EC del Parlamento
Europeo y del Consejo sobre residuos de aparatos eléctricos y electrónicos (RAEE). La correcta
eliminación de este producto evita consecuencias negativas para el mercado y la salud.
El símbolo en el producto o en los documentos que se incluyen con el producto, indica que no
se puede tratar como residuo doméstico. Es necesario entregarlo en un punto de recogida para
reciclar aparatos eléctricos y electrónicos. Deséchelo con arreglo a las normas medioambientales
para eliminación de residuos. Para obtener infomación más detallada sobre el tratamiento,
recuperación y reciclaje de este producto, póngase en contacto con el ayuntamiento, con el
servicio de eliminación de residuos urbanos o la tienda donde adquirió el producto.
_____________________________________________________________________________________________________________________
Questo dispositivo è munito della marcatura CE ai sensi della Direttiva 2002/96/EC del Parlamento
europeo e del Consiglio sui rifiuti di dispositivi elettrici ed elettronici (RAEE). Il corretto smaltimento
di questo prodotto, evita ricadute negative sul mercato e sulla salute.
Il simbolo apposto al prodotto oppure ai documenti di cui è corredato il prodotto, indica che il
medesimo non può essere trattato come rifiuto domestico. Consegnarlo presso un punto di
raccolta appositamente predisposto per dispositivi elettrici ed elettronici. Smaltirlo secondo le
apposite norme ambientali. Per informazioni più dettagliate sul trattamento, sul recupero e sul
riciclaggio di questo prodotto, rivolgersi al Comune, al servizio di smaltimento di rifiuti urbani
oppure al negozio dove il medesimo è stato acquistato.
_____________________________________________________________________________________________________________________
Dit apparaat is voorzien van het CE-merkteken volgens de Richtlijn 2002/96/EG van het Europees
Parlement en de Raad betreffende afgedankte elektrische en elektronische apparatuur (AEEA). De
correcte verwijdering van dit product voorkomt negatieve gevolgen voor de markt en de
gezondheid.
Het symbool op het product of op de bijbehorende documentatie geeft aan dat dit product niet
mag worden behandeld als huishoudelijk afval. Het moet worden afgegeven bij een verzamelpunt
voor recycling van elektrische en elektronische apparaten. Volg de plaatselijke voorschriften voor
afvalverwerking op wanneer u het apparaat afdankt. Voor meer informatie over de behandeling,
terugwinning en recycling van dit product kunt u contact opnemen met het stadskantoor in uw
woonplaats, uw afvalophaaldienst of de winkel waar u het product heeft aangeschaft.
6.-
5.-
KSET610X
A B
KSET910X
A B
In überinstimmung mit den Anforderungen der Europäischen Richtlinie 2002/96/EG über Elektround Elektronik-AlgerÄte (WEEE) ist vorliegendes Gerät mit einer Markierung versehen. Sie leisten
einen positiven Beitrag für den Schutz der Umwelt und die Gesundheit des Menschen, wenn Sie
dieses Gerät einer gesonderten Abfallsammlung zuführen. Im unsortierten Siedlungsmüll könnte
ein solches Gerät durch unsachgemäâe Entsorgung negative Konsequenzen nach sich ziehen.
Auf dem Produckt order der beiliegenden Produktdokumentation ist folgendes Symbol einer
durchgestrichenen Abfalltonne abgebildet. Es weist darauf hin, dass eine Entsorgung im normalen
Haushaltsabfall nicht zulässig ist. Entsorgen Sie dieses Produckt im Recyclinghof mit einer
getrennten Sammlung für Elektro- und Elektronikgeräte. Die Entsorgung muss gemäâ den örtlichen
Bestimmungen zur Abfallbeseitigung erfolgen
Bitte wenden Sie sich an die zuständigen Behörden Ihrer Gemeindeverwaltung, an den lokalen
Recyclinghof für Haushaltsmüll oder an den Händler, bei dem Sie dieses Gerät erworben haben,
um weitere Informationen über Behandlung, Verwertung und Wiederverwendung dieses Produkts
zu erhalten
_____________________________________________________________________________________________________________________
На данном приборе стоит маркировка СЕ согласно директиве 2002/96/EC Европейского
парламента и Европейского совета об отходах электрического и электронного оборудования
(ОЭЭО) Правильная утилизация этого изделия предотвратит отрицательные последствия íà
здоровье и окружающую среду.
Маркировка на приборе или в сопроводительной документации указывает, что данное
изделие не может быть утилизировано как бытовые отходы. Необходимо сдать его в пункт
утилизации электрического и электронного оборудования . Следует выбрасывать прибор в
соответствии с нормами экологического законодательства относительно обращения с
отходами.
Для получения более подробной информации об обработке и утилизации данного изделия
обратитесь в местные административные органы, службу обращения с коммунальными
отходами или магазин, в котором было приобретено изделие.
_____________________________________________________________________________________________________________________
Este aparelho está classificado de acordo com a Directiva Europeia 2002/96/EC sobre Resíduos e
equipamento eléctrico e electrónico (REEE). Ao garantir a eliminaçao adequada deste produto,
estará a ajudar a evitar potenciais consequências negativas para o ambiente e para a saúde
pública, derivadas de um manuseamento inadequado dos desperdicios deste producto.
O símbolo no produto, ou nos documentos que acompanham o produto, indica que este
aparelho não pode receber um tratamento semelhante ao de um desperdicio doméstico. Pelo
contrário, deverá ser depositado no respectivo centro de recolha para a reciclagem de
equipamento eléctrico e electrónico. A eliminacão deverá ser efectuada em conformidade com as
normas ambientais locais para a eliminaçao de desperdícios. Para obter informações mais
detalhadas sobre o tratamento, a recuperaçao e a reciclagem deste produto, contacte o
Departamento na sua localidade, o seu serviço de eliminaçao de desperdícios domésticos ou a
loja onde adquiriu o produto.
_____________________________________________________________________________________________________________________
Den här apparaten är CE märkt i enlighet med direktivet 2002/96/EC i Europa Parlamentet och
RAEE av Europarådet angående avfall från elektriska och elektroniska apparater. Rätt
avfallshantering av denna produkt undviker fara för miljön.
Symbolen på produkten eller dokumenten som medföljer produkten, visar att man inte kan
hantera det som hushållsopor. Det skall föras till återvinningstation för elektriska och elektroniska
apparater. Hantera i enlighet med miljölagarna. För mer information kontakta din kommuns
återvinningstation.
G H
English
Dear customer,
We congratulate you on your choice. We are
sure that this modern, functional and
practical article, constructed from highest
quality materials, will fully meet your
requirements.
Please read all the sections of this
INSTRUCTION MANUAL before using the
extractor for the first time to be able to obtain
its full performance and to avoid any
breakdowns that could arise from its misuse,
also allowing small problems to be
overcome.
Keep and store this manual. It will always
provide useful information on the extractor
and will help other people to use it.
Safety Instructions
Before using the extractor for the first time,
you must read the following safety
instructions.
* Never pull the cable to unplug the
extractor.
* Do not switch on the extractor if the
electricity cable is worn or has cuts or if there
are signs of deterioration around the control
panel.
* If the extractor stops working or functions
abnormally, unplug it from the mains and
advise the technical service.
* Do not leave gas burning without a pan
above it under the hood.
* Do not allow grease to accumulate in any
part of the extractor, especially in the filter as
this COULD PRODUCE A FIRE RISK
* Do not flambé food under the hood.
* Before installing the extractor consult local
rules and regulations in force with respect to
current standards on air and fumes.
* Before connecting the extractor to the
mains, check that both the voltage and the
frequency conform to what shown on the
characteristics label of the extractor located
inside it.
* The cooker hoods provided with plug must
preserve it accessible. In the opposite way, it
is necessary to install an omnipolar switch
with at least a distance of 3 mm. between
Line (L) and Neutral (N).
* The room must be provided with
appropriate ventilation if the extractor is
going to be used at the same time as other
food processing equipment not using
electrical power.
* We recommend the use of gloves and
caution when cleaning the inside of the
extractor.
* Your extractor is designed for domestic use
and only for expelling and purifying gases
arising from food preparation. Its use for any
other purpose must be at your own
responsibility and may be dangerous.
* For any repair, including the substitution of
the feeder it must go to the Service of
qualified Technical Attendance closest,
always using replaced original. Repairs and
modifications carried out by others could
damage the apparatus or cause it to
malfunction, and risking your safety. The
manufacturer cannot be held liable for
inappropriate use of the apparatus.
Description of the appliance (Fig.1)
A Motor controls, three speeds.
B Light switch independent from motor
commands.
C Two lamps for hood lighting.
D Filters located over cooking area,
easily removable for cleaning (2 or 3
according to model).
E Extractable group that allows a greater
gas capture area.
F Possibility of incorporating active
charcoal filters (Fig. 6).
G-H Anti return tabs to be located in the
outlet mouth, locating their ends in the
holes provided (Fig. 4).
3.-
4.-
1.-
A
C
D
E
B
A
Speed Vitesse Velocidad Velocità
Low Moyenne Baja Bassa Laag Leistungsstufe Низкая Baixa Låg
I
High Maximum Alta Alta Hoog Intensivstufe Высокая Alta Hög
II
Intensive Intensive Intensiva Intensa Intensief Intensiv Интенсивная Intensiva Intensiv
+
Light Lumière Luz Luce Licht Beleuchtung Освещение Luz Lampa
On
Allumé
Off
Eteint
Encendido
Apagado
Accesa
Spenta
Snelheid
Aan
Uit
Absaugleistung Скорость Velocidade Hastighet
Ein
Aus
Включено
Отключено
Acesa
Desligada
2.-
På
Av
Instructions for use
By pushing buttons shown in the figure 1,
you will be able to control the functions of the
extractor
Two achieve better extraction, we
recommend switching on the extractor a few
minutes before starting to cook (3 - 5
minutes) so that the air flow is continuous
and stable when extracting the fumes.
Likewise, keep the extractor switched on for
a few minutes when cooking is complete to
allow all fumes and odours to be expelled.
Cleaning and maintenance
Before carrying out any cleaning or
maintenance activities, ensure that the
extractor is disconnected from the mains.
To carry out cleaning and maintenance,
follow the Safety Instructions.
Filter cleaning
To remove the filters from their locations
release the anchoring points. Clean the filter,
either by putting it in the dishwasher (see
notes) or leaving it standing in hot water to
simplify the removal of grease or, if wished,
by means of special sprays (protecting the
non metallic parts). Once clean, leave it to
dry.
Notes: cleaning in the dishwasher with
aggressive detergents may darken the
surface of metallic parts, without this
affecting its gas retaining properties.
N.B. The filter must be cleaned at least once
a month depending on how often the
extractor is used. It must be remembered
that grease accumulates in the extractor
when cooking, whether it is switched on or
not.
Cleaning of the extractor body
The use of warm (40ºC approx.) soapy water
is recommended. A cloth moistened in this
water is used for cleaning the extractor,
paying special attention to the grids.
Afterwards, dry it using a lint-free cloth.
Note:
* Never use metallic scouring pads or
abrasive products that could damage the
surface.
* Do not use scrapers with metallic surfaces
such as knives, scissors etc.
Active charcoal filter
* To install the charcoal filters it is necessary
to firstly remove the metallic grease filters.
* In order to fix them it is necessary to
introduce the rear lips of each filter in the
holes provided for it in the security grid,
turning them upwards until its fixation by
clipping in the front part (Fig.6).
* The carbon filters last from three to six
months depending on the particular
conditions of use.
* The active carbon filters can neither be
washed nor regenerated. Once they are
exhausted, they must be changed.
* To replace worn out filters with new ones,
remove the old ones in the reverse order to
that of installation.
Changing Bulbs
* It is important that the mains are
disconnected, and ensure the bulbs that are
to be replaced are not hot.
* Remove the light lens to expose the
extractable lamps.
* The maximum bulbs power is 20W.
Technical Information (Fig.3)
Dimensions Width = 600//900 mm
Depth = 300 mm
Height = 353 mm
Electrical characteristics:
REFER TO RATING PLATE
English
Installation
To fix the cooker hood please choose one of
the following options:
a) Fix it to the upper part of the furniture
Figure 3 must be used where the position
of the holes is indicated.
b) Fix it to the internal laterals of the
furniture:
1.- Screw two screws to each side of the
furniture interior following figure 5
instructions. Leave them 3 mm loose for
adjustment.
2.- Screw the provided brackets to the top
part of the hood, keeping the internal
furniture width.
3.- Hold and rise the hood until the slots of
their brackets fit in the screws (step 1)
of the furniture.
4.- Keeping the appliance hold, push it
towards furniture’s bottom until screws
fits into a stable position inside the slots.
5.- Rise the hood a little until a definitive
position is obtained and tight the loosen
four screws to the brackets.
The lower part of the extractor must be
installed a minimum height of 60 cm
above the hob for electric cookers and 65
cm for gas cookers. (If the installation
instructions of a gas cooker indicate a
greater distance this must be observed).
The KSET910X cooker hood only can be
installed in furniture of 90 cm.
Once the hood is installed, the front facia
can be fitted. For this the frontal surface of
the hood is firstly cleaned with alcohol
(manufacturer’s safety recommendations for
the handling of solvents are always to be
followed). Then remove the protective paper
of the adhesive on the fascia, it can now be
placed in its correct position, applying
pressure on the adhesive area.
When the extractor is working at the same
time as other non-electrical cooking
equipment, the outlet air pressure must not
exceed 4 Pa (4 x 10
To achieve optimum performance the length
of the outlet hose should not exceed 4
meters, or include more than two 90º angles
(elbows)
Although venting to the outside is
recommended, active carbon filters may be
used, which allow the purified air to be
returned to the kitchen through the outlet
pipe.
If you wish to substitute the front panel and
replace it with one matching the kitchen
units, follow the following instructions (Fig.2):
* Withdraw the movable group.
* Remove the screws (T) that support the
front.
* Install the new front fixing it with the same
screws that held the old one.
-5
bar).
If something does not work
Before seeking technical assistance carry
out the following checks first:
Om någonting inte fungerar
Innan du kontaktar verkstad gå efter följande
instruktioner:
FEL MÖJLIG ORSAK LÖSNING
Fläkten fungerar inte
Fläkten suger inte
upp tillräckligt eller
vibrerar
Lamporna tänds inte
Kontakten är inte isatt Sätta i kontakten
Det kommer inte ström i
kontakten
Filtret är fullt med fett Rengör filtret eller byt ut det
Tilltäppning i utgångsröret Ta bort tilltäppningen
Fel utgångsrör Kontakta installatören och följ
Lamporna är utbrända Byt ut lamporna
Lösa lampor Skruva åt lamporna
Försäkra dig om att det finns el
instruktionerna i denna
bruksanvisning
SMEG. förbehåller sig rätten att göra ändringar för att förbättra sina produkter om de anser det
nödvändigt utan att detta försämrar produkten.
Svenska
Byta ut lampor
* Ta bort glasskyddet på lampan så att man
ser de uttagbara lamporna.
* Vidta försiktighetsåtgärder för att ta av
fläkten och se till att lamporna inte är varma.
* Den maximala strömstyrkan på lamporna
Är 20W.
Teknisk information (Fig. 3)
Dimensioner:
Elkännetecken:
SE KÄNNETECKENSETIKETTEN
Breddstorlek = 600//900mm
Djup = 300 mm
Hög = 353 mm
Montering
För att fixera fläkten på möbeln välj följande:
a) På den övre delen av möbeln. Använd
modellen i figur 5 där man kan se
placeringen av hålen.
b) På de innersidorna av möbeln:
1.- Skruva åt två skruvar på varje
innersida av möbeln, med figur 5 som
modell. Därefter skruva loss dem ung.
3mm.
2.- Skruva till den tillförsedda vinkelhaken
på den övre delen av fläkten, justerad
till innerdelen av möbeln.
3.- Flytta fläkten vertikalt från underdelen
av möbeln tills skruvarna fogar sig i
möbelns rännor på vinkelhakarna.
4.- Utan att släppa fläkten, putta den mot
botten av möbeln tills skruvarna fogar
sig stadigt i rännorna.
5.- Lyft fläkten till dess rätta position och
skruva åt alla skruvar i vinkelhakarna en
gång till.
Nedre delen på fläkten ska placeras minst
65 cm ovanför spisen om det är gas och
60 cm om det är elspis. Om gasspisens
instruktioner säger att det ska vara högre
måste man ha det i åtanke.
Henne fläkten KSET910X inte annan än
den Maj bli installera på utrustning av
90cm
När fläkten väl är installerad, kan man
placera främre skyddlisten. För att göra det
måste man först göra rent ytan med
isopropolisk alkohol på den främre delen av
fläkten (man måste alltid följa tillverkarens
säkerhetsrekommendationer). Efter att ha
tagit bort skyddspappret på fästytan av listen
så fäster man denna på avsedd plats med
ett litet tryck.
När man sätter på köksfläkten samtidigt som
av annan än elenergi försedda apparater så
bör inte luftströmmen vara starkare än 4Pa
(4 x 10 –5 bar).
För att uppnå bästa prestation, ska
uttömnings-röret inte vara längre än 4 meter
och Inte ha mer än två vinklar på 90º.
Även om vi rekommenderar att oset ska
föras utomhus går det även att installera
aktiva kolfilter som tillåter oset föras tillbaka
till köket via utgångsröret.
Om du vill byta ut originalfrontpanelen mot
en annan likvärdig så gå efter följande
instruktioner (Fig. 2):
* Ta ut den uttagbara enheten.
* Ta bort skruvarna (T) som håller fast
frontpanelen.
* Montera den nya frontpanelen på samma
sätt som originalet var fastsatt.
Special U.K. Requirements
Height above gas hob: 75 mm minimum.
NEVER PLACE THE COOKER HOOD
OVER AN EYE-LEVEL GRILL.
This appliance must be connectec by a
competent person, using fixed wiring via a
DOUBLE POLE SWITCHED FUSED SPUR
OUTLET.
Electrical connection
We recommend that the appliance is
connected by a qualified electrician, who is a
member of the N.I.C.E.I.C. and who will
comply with the I.E.E. and local regulations.
Should the colour of the wires in the mains
lead for the appliance not correspond with
the coloured markings identifying the
terminal in your spur box proced as follows:
* The wire which is coloured blur must be
connected to the marked N (Neutral) or
coloured Black.
* The wire which is coloured brown must be
connected to the marked L (Live) or
couloured Red
* Where avialable (see installation), the wire
which is coloured yellow/green must be
connected to the market or coloured
Yellow/Green.
If the cooker hood is installed for use above
a gas appliance then the provision vor
ventilation must be in accordance with the
Gas Safety (Installation & Use) Regulations
1984 and the relevant Building Regulations.
Detailed recommendations are contained in
the following British Standard Codes of
Practice BS6172, BS5440 and BS6891
Current Edition.
SMEG reserves the right to make corrections in its appliances wherever it considers these
necessary or useful, without harming their essential features.
Loading...