Smeg DOSC36X, DOSC34X, DOSC34N User Manual
Contents
@
1. INSTRUCTIONS FOR USE..................................................... 48
2. SAFETY PRECAUTIONS........................................................ 50
3. ENVIRONMENTAL RESPONSIBILITY ................................... 52
4. GET TO KNOW YOUR OVEN ................................................ 53
5. AVAILABLE ACCESSORIES .................................................. 54
6. FRONT PANEL ....................................................................... 55
7. ELECTRONIC PROGRAMMER.............................................. 59
8. USING THE OVEN.................................................................. 68
9. COOKING WITH THE OVEN .................................................. 71
10. CLEANING AND MAINTENANCE .......................................... 78
11. EXTRAORDINARY MAINTENANCE ...................................... 81
12. INSTALLING THE APPLIANCE .............................................. 85
INSTRUCTIONS FOR THE USER: these instructions contain user
recommendations, a description of the controls and the correct
procedures for cleaning and maintenance of the appliance.
INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified
technician who must install the appliance, set it functioning and carry out
an inspection test.
Further product information is available from the website www.smeg.com
47
General instructions
1. INSTRUCTIONS FOR USE
This manual is an integral part of the appliance and must therefore be kept in its
entirety and in an accessible place for the whole working life of the appliance.
It is important to carefully read this manual and all the instructions contained
herein before using the appliance. Installation must be carried out by competent
persons in accordance with the regulations in force. This appliance is intended
for household use and complies with te eec directives currently in force. The
appliance has been built to carry out the following functions: cooking food; any
other use is considered improper.
The manufacturer cannot be held liable for use other than as indicated.
This appliance has been manufactured to cook food, do not use the appliance to
heat rooms.
This appliance is marked according to european directive 2002/96/EC on waste
electrical and electronic equipment (weee).
This directive defines the standards for the collection and recycling of waste
electrical and electronic equipment applicable throughout the european union.
Do not obstruct ventilation openings and heat dispersal slits.
Do not rest any weight or sit on the open door of the appliance.
48
The identification plate bearing the technical data, serial number and brand
name is visibly applied on the appliance.
Do not remove this plate for any reason.
Before the appliance is put into operation, all the protective films applied inside
or outside must be removed.
Take care that no objects are stuck in the door of the oven.
The appliance becomes very hot during use. Suitable heat-proof gloves should
be worn for all operations.
General instructions
Do not use metallic sponges or sharp scrapers as they will damage
the surface.
Use normal non-abrasive products, including wooden or plastic
utensils if necessary. Rinse thoroughly and dry using a soft cloth or
chamois leather.
Do not allow residues of sugary foods (such as jam) to set inside the
oven. If they are allowed to set for too long, they could ruin the enamel
covering the inside of the oven.
Do not use plastic kitchenware or containers. The high temperatures inside the
oven could melt the plastic, damaging the appliance.
Do not use sealed tins or containers in the appliance. Overpressure may occur
inside the containers during cooking, creating a danger of explosion.
Do not leave the appliance unattended during cooking processes where fats or
oils could be released.
Fats and oils may catch fire.
Do not cover the bottom of the oven with aluminium or tinfoil sheets during
cooking and do not place pans or trays on it to avoid damage to the enamelled
surface.
If the surfaces are still very hot during cooking, do not pour water directly onto
the trays. The steam could cause severe burns and damage to enamelled
surfaces.
All cooking operations must be take place with the door closed.
49
General instructions
2. SAFETY PRECAUTIONS
Refer to the installation instructions for the safety regulations for electric or gas
appliances and ventilation functions.
In your interests and for your safety the law requires that the installation and
servicing of all electrical appliances is carried out by qualified personnel in
accordance with the regulations in force.
Our approved installers guarantee a satisfactory job.
Gas or electrical appliances must always be disconnected by suitably skilled
people.
Before connecting the appliance to the power grid, check the data on the plate
against the data for the grid itself.
Before carrying out installation/maintenance work, make sure that the appliance
is not connected to the power grid.
The plug to be connected to the power supply cable and its socket must be of
the same type and conform to the regulations in force.
The socket must be accessible after the appliance has been built in.
Never disconnect the plug by pulling on the cable.
If the power supply cable is damaged, contact the technical support service
immediately and they will replace it.
50
It is obligatory for all electrical equipment to be earthed according to the
methods laid down by safety regulations.
Immediately after installation, carry out a brief inspection test, following the
instructions below. Should the appliance not function, disconnect it from the
electricity supply and call the nearest technical support centre.
Never attempt to repair the appliance.
Do not use or leave flammable materials near the appliance or in the food
warming compartment.
During use the appliance becomes very hot. take care not to touch the heating
elements inside the oven.
This appliance must not be used by people (including children) of reduced
physical and mental capacity, or lacking in experience in the use of electrical
appliances, unless they are supervised or instructed by adults who are
responsible for their safety.
General instructions
Do not let children go near the appliance when it is in operation or play with it at
any time.
Do not insert pointed metal objects (cutlery or utensils) into the slits in the
appliance.
If the appliance is installed on caravans or boats, it must not be used to heat
rooms.
Do not use steam jets for cleaning the appliance.
The steam could reach the electronics, damaging them and causing shortcircuits.
Do not modify this appliance.
Do not spray any spray products near the electrical appliance while it is in
operation.
Do not use spray products while the product is still hot.
The manufacturer cannot be held liable for damage to persons or things caused
by failure to observe the above instructions, by interference with any part of the
appliance or by the use of non-original spare parts.
51
Instructions for disposal
3. ENVIRONMENTAL RESPONSIBILITY
3.1 Our environmental responsibility
Pursuant to Directives 2002/95/EC, 2002/96/EC and 2003/108/EC relating to
the reduction of the use of hazardous substances in electrical and electronic
appliances, as well as to the disposal of refuse, the crossed out bin symbol on
the appliance indicates that the product, at the end of its useful life, must be
collected separately from other refuse. Therefore, the user must consign the
product that has reached the end of its working life to the appropriate selective
collection centres for electrical and electronic refuse, or deliver it back to the
retailer when purchasing an equivalent product, on a one for one basis.
Adequate differentiated collection for the subsequent forwarding of the
decommissioned product to recycling, processing and ecologically compatible
disposal contributes to avoiding possible negative effects on the environment
and on health, and promotes recycling of the appliance’s constituent materials.
The illicit disposal of the product by the user results in the application of
administrative sanctions.
The product does not contain substances in quantities sufficient to be
considered hazardous to health and the environment, in accordance with
current European directives.
52
3.2 Your environmental responsibility
Our product’s packing is made of non-polluting materials, which are therefore
compatible with the environment and recyclable. Please help by disposing of the
packaging correctly. You can obtain the addresses of collection, recycling and
disposal centres from your retailer or from the competent local organisations.
Do not discard the packaging or any part of it, or leave it unattended. It can
constitute a suffocation hazard for children, especially the plastic bags.
Your old appliance also needs to be disposed of correctly.
Important: hand over your appliance to the local agency authorised for the
collection of electrical appliances no longer in use. Correct disposal enables
intelligent recovery of valuable materials.
Before disposing of your appliance it is important to remove doors and leave
shelves in the same position as for use, to ensure that children cannot
accidentally become trapped inside during play. It is also necessary to cut the
connecting cable to the power grid, removing it along with the plug.
Instructions for the user
11121
8
9
10
4
3
2
7
6
5
1
2
3
4
5
3
6
4
6
7
8
A
1
2
3
4
5
3
6
4
6
7
4. GET TO KNOW YOUR OVEN
Control panel
Roof liner
(mobile)
Bulb
Oven seal
Roof liner
(fixed)
Pan and rack runners
Oven fan
Self-cleaning panels
53
Instructions for the user
5. AVAILABLE ACCESSORIES
NOTE: Some models are not provided with all accessories.
Rack: for holding cooking containers.
Tray r ack: to be placed over the top of the oven
tray; for cooking foods which may drip.
Oven tray: for collecting fat from foods placed on
the rack above.
Accessories available on request:
Original supplied and optional accessories may be ordered from any Authorised
Support Centre.
Use original SMEG accessories only.
54
For the functions of the available accessories and their use, see chapter "8.
USING THE OVEN".
Instructions for the user
11
12
1
8
9
10
4
3
2
7
6
5
1
3
4
2 6
8 8
A
1
3
5
2 7
8 8
6. FRONT PANEL
All the controls and indicator lights can be seen on the front panel. The symbol
under each knob indicates the oven which it controls. The tables below describe
the symbols used.
SMALL OVEN THERMOSTAT KNOB
The cooking temperature is
selected by turning the knob
clockwise to the desired
setting, between 50°C and
270°C.
55
Instructions for the user
SMALL OVEN FUNCTION KNOB
Turn the knob clockwise or
anti-clockwise to select a
function for the small oven
from the following options:
GRILL FUNCTION
+ TOP RESISTANCE
+ BOTTOM RESISTANCE
TOP RESISTANCE
+ BOTTOM RESISTANCE
In the small oven the function with the least energy consumption is
LARGE OVEN THERMOSTAT KNOB
SMALL GRILL FUNCTION
LARGE GRILL FUNCTION
The cooking temperature is
selected by turning the knob
clockwise to the desired
setting, between 50°C and
250°C.
56
LARGE OVEN FUNCTION KNOB (on some models only)
Turn the knob clockwise or anti-clockwise to select a
function for the large oven from the following options:
THAWING FUNCTION
LARGE GRILL FUNCTION
SMALL GRILL FUNCTION CIRCULAR FUNCTION
SMALL GRILL FUNCTION
+ VENTILATION
LARGE GRILL FUNCTION
+ VENTILATION
Instructions for the user
In the large oven the function with the least energy consumption is
LARGE OVEN FUNCTION KNOB (on some models only)
Turn the knob clockwise or anti-clockwise to select a
function for the large oven from the following options:
LARGE GRILL FUNCTION CIRCULAR FUNCTION
LARGE GRILL FUNCTION
+ VENTILATION
THAWING FUNCTION
In the large oven the function with the least energy consumption is
ELECTRONIC PROGRAMMER - ANALOGUE CLOCK (on some models
only)
The programming clock can be used
to display the current time or to set a
timer or cooking programme.
TIMER BUTTON VALUE DECREASE BUTTON
TIMED COOKING AND
SCHEDULED COOKING
BUTTON
CLOCK ADJUSTMENT AND
RESET
VALUE INCREASE BUTTON
57
Instructions for the user
ELECTRONIC PROGRAMMER - DIGITAL CLOCK (on some models only)
The programming clock can be used
to display the current time or to set a
timer or cooking programme.
TIMER BUTTON VALUE DECREASE BUTTON
SCHEDULED COOKING
BUTTON
TIMED COOKING BUTTON MANUAL MODE BUTTON
THERMOSTAT INDICATOR LIGHT (orange)
During the oven heating phase the thermostat light remains on. Once
the oven has reached the set temperature the light turns off.
VALUE INCREASE BUTTON
58
Instructions for the user
7. ELECTRONIC PROGRAMMER
7.1 Analogue clock (on some models only)
FUNCTION KEY LIST
TIMER BUTTON
TIMED COOKING AND
SCHEDULED COOKING
BUTTON
CLOCK ADJUSTMENT AND
RESET
VALUE DECREASE BUTTON
VALUE INCREASE BUTTON
THE ELECTRONIC PROGRAMMER ONLY CONTROLS THE LARGE OVEN
AND HAS NO CONTROL OVER THE SMALL OVEN
At the end of each completed programming operation, 10 beeps will sound 3
times at intervals of about 1 minute. This sequence can be stopped at any time
by pressing any key.
7.1.1 Setting the time
When the oven is used for the first time, or after an interruption in the electricity
supply, the display flashes at regular intervals.
To set the time proceed as follows:
• Press to stop the display flashing;
• Press and hold for 2 seconds. A flashing dot will be seen between 2 and
3. The time can now be set;
• Press the value modification buttons or to increase or decrease the
setting by one minute for each pressure until reaching the desired time;
• Press or wait 5 seconds to exit the time setting mode.
59
Instructions for the user
7.1.2 Timer
The timer does not stop the cooking process. It only warns the user that the
preset number of minutes have passed.
• Press and the display will light up as
shown in figure 1;
• Within 5 seconds press the value modification
buttons or in order to increase or
decrease by one minute for each pressure until
reaching the desired time (1 hour and 10
minutes is shown in figure 2);
• Press or wait 5 seconds to exit the timer
setting mode;
• The display will show the current time and the
symbol between 9 and 10;
• To view the remaining time, press and
press it again to return to the current time view;
1)
2)
60
• To silence the buzzer at the end of the time, press any button on the
programmer.
If the user wants to end cooking at the end of the time, the thermostat and oven
function knobs must be controlled manually.
A time longer than 4 hours cannot be set.
If is pressed accidentally and no time setting is desired, press and hold
for about 5 seconds to cancel the settings.
Loading...