Smeg CR322ANFL User manual [GB]

GB
Instructions for use
Upright refrigerator-freezer
Upright refrigerator-freezer
Thank you for your confi dence in buying our appliance and congratulations on the excellent choice. We hope it will successfully serve its purpose for many years.
Upright refrigerator - freezer (hereinafter: the appliance) consists of two parts: top part is refrigerator and bottom part is upright freezer.
181300
Before fi rst operation .................................................. 3
Description of the appliance ......................................5
Installation and connections ...................................... 6
Changing the Direction of Opening the Door ........... 8
Control panel - appliance with electronical
regulation ..................................................................... 9
Control panel - Appliance with mechanical
regulation .................................................................. 15
Refrigerator accessories ..........................................15
Storage of food in the refrigerator ........................... 17
Storage of food in the FRESH ZONE ....................... 18
Freezing and storage of frozen food .......................19
Defrosting the appliance ........................................... 20
Cleaning the appliance .............................................21
Troubleshooting guide .............................................. 22
Noise level .................................................................. 24
2
Before fi rst operation
• The appliance is manufactured in compliance with all relevant safety standards; however, it is recommended that persons with impaired physical, motional, or mental abilities, or persons with inadequate experience and knowledge, do not use the appliance without due supervision. The same recommendation applies to minors using the appliance.
• Before connecting the appliance read these instructions carefully. They describe the appliance and provide instructions for its safe and correct use. The instructions are prepared for different types and models of the appliance so they may contain descriptions of functions and compo­nents your appliance may not have.
• These instructions also contain the NO FROST version of the freezer, fi tted with the fan and featuring automatic defrosting.
• Remove the wrapping protecting the appliance during transport.
• Wrappings contain environmentally friendly materials which can be recycled, recovered or dispo­sed off without threat to the environment.
• On the door corners (on freestanding appliances) or on the housing of the appliances (on built-in appliances) the spacers are installed, which should be removed and replaced with the attached spacer-plugs.
• Before connecting the appliance to the mains supply, leave it in upright position for about 2 ho­urs. This will reduce possibility of malfunctions in the cooling system resulting from prior transport and handling.
• The appliance must be connected to the mains supply in accordance with the standing regulati­ons and local requirements.
• The appliance must not be used in open air or exposed to weather precipitation.
• Always disconnect the appliance from power supply (pull the power cord from wall socket) before cleaning and before replacing the light bulb.
• If the power supply cord is damaged, in order to avoid hazard it must be replaced by the service or by qualifi ed personnel.
• In case of longer disuse fi rst turn the appliance off with the ON/OFF button and disconnect it from mains supply. Empty the appliance, clean the interior and leave the door ajar.
• For the protection of environment deliver the obsolete appliance to the authorized scrap applian­ce dealers.
• Never let the children play with the appliance.
• Self closing shear door hinge pulls the door to the cabinet just before closing, thereby preventing the door to remain ajar. Equally it limits the door opening angle and prevents damage to adjacent elements.
• Rating plate with basic information is located in the interior of the appliance. If the sticker plate is not suitable for your language, replace it with the attached one.
Warning: Ventilation slots on the appliance or built-in element should always be kept clean and unobstructed.
Warning: Do not use any mechanical accessories when thawing the refrigerator, except for those explicitly recommended by the manufacturer.
Warning: To prevent any pollution be careful not to damage the insulation or refrigeration tubes at the rear wall during the installation, cleaning and disposal of the appliance.
Warning: Do not use any electrical devices inside the appliance, except for those explicitly recommended by the manufacturer.
181300
3
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of thisproduct. For more detailed information about recycling of this product, please contact your local city offi ce, your household waste disposal service or the shop where you purchased the product.
181300
4
Description of the appliance
Interior equipment of the appliance will typically vary according to the specifi c model.
A Refrigerator 1 Fan 2 Interior light 3 Control panel 4 Horizontal bottle rack 5 Adjustable glass shelves 6 Pull-out glass shelf (adjustable height) 7 Removable snack tray 8 Foldable egg rack
(closed - 6 eggs, open - 12 eggs)
9 FRESH ZONE pan 10 Vegetable crisp pan 11 Refrigerator door pans
(options: deep, shallow; covered or no cover)
12 Door bottle rack with safety holder
B Freezer 13 Storage compartment 14 Freezing compartment 15 Legs
181300
5
Installation and connections
Selecting the locationSelecting the location
Positioning the
Positioning the appliance
appliance
• Place the appliance in dry and well aired room. The appliance operates best at temperature ranges indicated in the chart below. Relevant class of the appliance is indicated on the rating plate.
Class Ambient temperature
SN (subnormal) from + 10°C to + 32°C
N (normal) from + 16°C to + 32°C
ST (subtropical) from + 16°C to + 38°C
T (tropical) from + 16°C to + 43°C
Positioning the appliance requires two persons in order to avoid injuries or damage to the appliance.
• Place the appliance fl atly and fi rmly on a solid base. The appliance is fi tted with adjustable feet on the front side, used to level the appliance (certain models only).
• Avoid exposing the appliance to direct sunlight or heat sources. If this is not feasible, install insulation plate between the appliance and adjacent heat source.
• The appliance may stand independently or you may incorporate it into the kitchen cabinet. Be sure to leave enough space for cooling of condenser (distance from the wall or the opening should be 200 cm cabinet above the appliance should be at least 5 cm.
After the installation, the appliance mains plug should be
accessible!
2
). Distance to the
181300
6
Connecting to power
Connecting to power supply
supply
• The appliance is fi tted with spacers to be mounted on the top edge of the condenser. They prevent the rear of the appliance to be pushed too close to the wall. Spacers are fabricated universally regarding the different distance of the condenser from the cabinet, so make sure to position them properly.
• Use the power cord to connect the appliance to the mains power. Wall outlet must be fi tted with ground terminal (safety socket). Required nominal voltage and frequency are indicated on the relevant label or rating plate of the appliance.
• Mains power connection and grounding must be made in line with standing regulations and local requirements.
The appliance is able to accommodate minor temporary voltage tolerances, but they may not exceed -6% to +6%.
181300
7
Changing the Direction of Opening the Door
Freestanding appliance
Tilt the appliance so that the bottom hinge can be unscrewed and proceed with disassembling as shown in the Figure 3. Then fi x the assembly parts again in the opposite turn. Use the attached opposite hinge insert piece. Use the bungs, which have been pulled out, on the opposite side. Check the door seal. In case that it does not rest well, take it off and turn it by 180°.
Necessary tools: ring spanner No.8, screwdriver, torque 25
181300
8
Loading...
+ 17 hidden pages