SMC Networks SMCWTK-G User Manual

SMCWTK-G is another innovative solution brought to you by SMC. It is the industry’s first compact
All-in-One device that fits in a convenient easy-to-carry case. The new product offers 5 different
modes: Access Point, Ethernet Bridge, Repeater, Point-to-Point Bridging, and Point-to-Multipoint
Bridging.

The new EZ Connect™ g 802.11g Wireless Traveler’s Kit is the perfect business traveler’s companion.
Imagine checking into your hotel room with broadband connection after a long day’s trip, plug in
your SMCWTK-G as your Personal Access Point, you can now enjoy and relax at your bed or sofa
in your room to check email or surf the Internet.

SMCWTK-G can be used as an Ethernet Bridge that instantly converts any Ethernet device, such
as a gaming console, printer, set-top box, point-of-sale terminal, desktop or laptop computer into
a wireless network device. The new product does not require installing any drivers. Simply plug it
into your Ethernet device and your Ethernet device will become wireless!

The new SMCWTK-G is the ultimate convenient way to expand your wireless local area network.
The new product can also be configured as a Repeater via support for Wireless Distribution System
(WDS). Thus allowing you to connect your 802.11b and/or 802.11g clients to the wireless network
or extend the coverage of your WLAN in your home or office by simply placing additional SMCWTK-G in
the desired locations.

In cases where you need to bridge two networks together, the SMCWTK-G’s Point-to-Point and
Point-to-Multipoint Bridging functions is an ideal solution. That way the networks are wirelessly
connected without the need of expensive cabling.

• IEEE 802.11b, and 802.11g-Compliant

• High Data Rates at up to 54 Mbps

• EZ Installation Wizard

• Plug-and-Play, no drivers needed

• USB powered, no power adapter is needed

• All-in-one compact device

• Supports 5 different modes – Access Point, Ethernet Bridge, Repeater, Point-to-Point
Bridging, and Point-to-Multipoint Bridging

• Personal Access Point mode

• 802.11g Wireless Ethernet Bridge converts any Ethernet-equipped device to wireless

• Repeater function (via WDS) extends the range of your wireless network

• Point-to-Point Bridging, and Point-to-Multipoint Bridging connects remote workgroup

easily

• Supports highly secure wireless connections

After unpacking the SMCWTK-G EZ Connect™ g 2.4GHz 802.11g Wireless
Traveler’s Kit, check the contents of the box to be sure you have received the
following components:

• 1 SMCWTK-G device

• 1 USB Cable

• 1 Power Adapter

• 1 Cat-5 Ethernet Cable

• 1 EZ Installation Wizard and Documentation CD

• 1 Quick Installation Guide

Immediately inform your dealer in the event of any incorrect, missing or dam­aged parts. If possible, please retain the carton and original packing materials
in case there is a need to return the product.

Please register this product and upgrade the product warranty at SMC’s Web
site: http://www.smc.com

• Internet Explorer/Netscape Navigator 5.0 or higher

• PC running Windows 98SE/ME/2000/XP

• CD-ROM drive

• An AC power outlet or an available USB port to supply power to the
SMCWTK-G

• An available RJ-45 port on a 10/100 Mbps Ethernet hub or switch

• Another IEEE 802.11b or 802.11g compliant device installed on your network
such as the Barricade™ g Wireless Broadband Router with USB Print Server
(SMC2804WBRP-G) or another wireless adapter such as the EZ Connect™
g Wireless Cardbus Adapter (SMC2835W)

Features

Packackage Cage ConontenentsPackage Contents

Hardware Description

Quick Installation Guide

EZ Connect™ g Wireless

Traveler's Kit

Features

P

ackage Contents

System Rem RequirequiremenementsSystem Requirements

Hardware Description

Quick Installation Guide

EZ Connect™ g Wireless

Traveler's Kit

Har

Hardwdwarare Dee Descripcriptiontion

Hardware Description

From U.S.A. and Canada
(24 hours a day, 7 days a week)

(800) SMC-4-YOU; Phn: [phone];

Fax: [phone]
From Europe : Contact details can be found
on www.smc-europe.com or www.smc.com

INTERNET
E-mail addresses:

[e-mail]
[e-mail]

Driver updates:

http://www.smc.com/index.cfm?action=tech

support drivers downloads

http://www.smc.com/
http://www.smc-europe.com/

If you are looking for further contact
information, please visit
www.smc.com or www.smc-europe.com.

38 Tesla
Irvine, CA 92618
Phone: [phone]

Model Number: SMCWTK-G

FeatatururesFeatures

EZ Connect™ g Wireless

Traveler's Kit

The installation method makes the process as simple as possible.

1. Connect the SMCWTK-G to a PC using the Cat-5 Ethernet Cable.

2. Plug in the 4V power supply or use the supplied USB cable to
plug into an available USB port on the PC.

3. Insert the EZ Installation Wizard and Documentation CD.

4. Select “Install Utility”.

5. The Scan/Configuration Utility is now installed.
Go to “Start”, then “Programs”, select “SMC

802.11g Wireless Traveler’s Kit”, and then “SMC

802.11g Wireless Traveler’s Kit Configuration Utility”
to start the SMCWTK-G Scan/Configuration Utility
Program.

6. The Scan/Configuration automatically scans
for SMCWTK-G on the network.

7. Highlight the SMCWTK-G that you would like to
configure and click “Configure”. If your PC has the
same IP address subnet range as the SMCWTK-G,
then the login screen will appear. Enter the username
and password. The default IP address of the
SMCWTK-G is 192.168.2.25. The username is
“admin” and the password is “smcadmin”.
Skip to Step 10.

8. Make sure the PC has an IP address on the

192.168.2.xxx subnet, such as 192.168.2.30. If not, the
IP window will appear, as shown below. From this
window, set the static IP address of the PC to be in
the same subnet as the SMCWTK-G, e.g. 192.168.2.30.
Set the “Subnet Mask” to be “255.255.255.0”. Default
Gateway is usually the IP address of your router, e.g.

192.168.2.1. Click OK. Your PC may require a reboot
after changing the IP address. Click “Yes” to reboot
PC if prompted.

9. From Scan/Configuration Utility, select the
SMCWTK-G that you would like to configure and
click “Configure”. You will be asked to enter the
username and password to configure the SMCWTK-G.
By default, the username is “admin” and the pass­word is “smcadmin”. Enter this information and
click OK.

10. The default mode of SMCWTK-G is Access Point
(AP) mode. To switch to Client, Repeater, Point­to-Point Bridging (P2P), or Point-to-Multipoint
Bridging (PMP) mode, go to the Mode Page and
select the desired mode. Click Apply.

11. Then go to the Mode page and click Setup.
Configure the applicable properties for that mode,
such as the SSID, Channel, and Security.

12. The SMCWTK-G is now ready to use.

Features

P

ackage Contents

Hardware Description

Quick Installation Guide

EZ Connect™ g Wireless

Traveler's Kit

Hardware Installation

Using the EZ Inssing the EZ Installation Wallation Wizizarard

Using the EZ Installation Wizard

Quick InsQuick Installation Guideallation GuideQuick Installation Guide

EZ Connect™ g Wireless

Traveler's Kit

EZ Connect™ g Wireless

Traveler's Kit

SMCSMCWTKWTK-G-G

SMCWTK-G

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no
responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third
parties, which may result from its use. No license is granted by implication or otherwise under any patent
or patent rights of SMC. SMC reserves the right to change specifications at any time without notice.

SMC Networks, Inc.
38 Tesla
Irvine, CA 92618

Copyright © SMC Networks, Inc., 2004. All rights reserved.
SMC is a registered trademark; EZ Connect and Barricade are trademarks of SMC Networks, Inc.
Other product and company names are trademarks or registered trademarks of their respective holders.