Smarthome 1623PC PC-IR Linc User Manual
TM
PC-IR Linc
Control your Audio-Video equipment
with a computer!
Model #1623PC PC-IR Linc
Congratulations!
Congratulations on purchasing PC-IR Linc, the smallest and easiest gateway for IR
automation control. The PC-IR Linc is the easiest way to add IR control from a computer. For years, many home automation enthusiasts have struggled with controlling
audio and video devices by computer. Now, you can control a whole-house audio or
home theater system from the comfort of your PC.
PC-IR Linc is essentially a powerful learning remote that transmits IR signals in
response to RS-232 signals. It learns IR codes from your existing remote controls or
uses the built-in library of IR codes. All the programming is stored on a Windowsbased computer, so there are few memory constraints. Just plug the supplied power
adapter into a standard wall receptacle and place the PC-IR Linc into position, it is
that simple.
The PC-IR Linc has two internal IR blasters but its flexibility can also be increased by
using Mini Stick-On IR Emitters, SmartHome #8170S and #8171S. A level of intelligence can also be added to the PC-IR Linc by using it with one of the Smarthome
Probes. Probes may be used for many purposes including detecting the power status of an AV device.
Key Features
• Two built-in IR blasters
• Built-in IR sensor for learning IR signals from existing remote controls
• Three jacks for attaching additional emitters (single/double or blast)
• External power sensing when used with Smarthome Probes
• Small sized with front panel status indicators
• Non-volatile memory. Contents will be retained after a power outage.
Other Complementary Smarthome Products
The PC-IR Linc is ready to be used in a stand-alone application with a computer.
However, when teamed up and used with other Smarthome automation products,
you can transform the whole home's automation system to the same level and
sophistication normally found in multi-million dollar homes.
IR Linc
Forget about using multiple remotes to control the stuff in your house. Now you can
control everything in your home entertainment center with the same keypads that
controls your lights! Most audio/video components won't turn on simply by applying
power. But this remarkable unit translates PLC signals into IR codes that your home
audio and video components can understand.
2
Parts included with PC-IR Linc
• The PC-IR Linc controller box
• AC Adapter (12-Volts DC, 300mA)
• Double headed Stick-on IR Emitter
• CD-ROM Software
• Serial Cable
Overview
• During playback, the Active indicator
is used to show that IR signals are
being transmitted. During programming, it will indicate that the unit is
ready to learn an IR signal.
• The two IR/Learn blast emitters
emit IR light to control the AV
devices. During programming, they
sense the IR light from the teaching
remote.
• The Probe indicator is used to indicate when a Smarthome probe
is detecting an ON condition.
Quick Start Instructions
1. Click on the "Learn" button.
2. Enter a file name for the command.
Learning
an IR
Command
3. The red "Active" indicator will begin to blink rapidly.
4. Point the remote control at the PC-IR Linc.
5. Press and hold the button on the remote control until the red
"Active" indicator turns off.
6. The IR Linc status bar will turn blue if the command was successfully learned or red if the command was not learned.
(See page 8 for more detailed instructions)
• The three IR Out jacks for optional
external IR emitters.
• The Probe jack will accept the
Smarthome Probes to monitor the
power status of equipment.
• The Powerlinc/RS232 Cable jack
connects the serial cable between
the PC-IR Linc and a computer.
• The 12VDC, 300mA is for the power
12-volt adapter included in the kit.
1. Click and select an entry on the "Select Device Type" menu.
Using a
built-in IR
command
2. Click and select an entry on the "Select Brand" menu.
3. Choose a number from the "Select Code" menu.
4. Choose the IR function to be sent.
5. Click the "Send" button to have the IR Linc transmit the command.
(See page 7 for more detailed instructions)
3
Optional Accessories for the PC-IR Linc
A level of intelligence can also be added to the PC-IR Linc by using it with one of the
Smarthome Probes. Probes may be used for many purposes including detecting the
power status of an AV device.
TV Detector 8012 Light Detector 8013
Senses the presence of the high frequency RF
emissions of a TV when it is on. Place the
white "Whip" near the rear of the set.
Digital Input Low Voltage
Detector 8015
This probe can be attached to any device that
generates a 3-28 volt (AC or DC) signal. Some
AV equipment have low-voltage outputs that
may be used to detect the device's power status.
Contact Closure 8018 Extra Emitters
This sensor can be placed over the location of
an LED or any other light source to sense if
the AV device is on.
Video Detector 8016
Detects the presence of a baseband video signal when connected to the VIDEO OUT jack.
Can't be used with video gear that outputs a
blank or blue screen when switched off (or in
stand-by).
This probe is ideal for detecting the condition
of a dry-contact switch. Some AV receivers
have dry-contact relays open or close when
powered on or off.
4
Blast IR
Emitter#8174
Using Mini Stick-On IR Emitters or Blast
Emitters can increase the PC-IR Linc’s flexibility. The #8174 Blast Emitter will have a range
of four to seven feet when used with the PC-IR
Linc.
Stick-on Emitter
8171S
Loading...