Sloan SF Series, SF-2100 Series, SF-2150 Series, SF-2300 Series, SF-2350 Series Installation Instructions Manual

INSTALLATION INSTRUCTIONS FOR SLOAN SF SERIES

ELECTRONIC SENSOR ACTIVATED LAVATORY FAUCETS

Code No. 0816496

Rev. 4 (04/14)

SF-2100 Series

Adapter Powered with Battery Backup,
Sensor Activated, Pedestal Style Lavatory Faucets

SF-2150 Series

Battery Powered, Sensor Activated,
Pedestal Style Lavatory Faucets

SF-2200 Series

Adapter Powered with Battery Backup
Sensor Activated, Gooseneck Style
Lavatory Faucets

SF-2250 Series

Battery Powered, Sensor Activated
Gooseneck Style Lavatory Faucets

SF-2300 Series

Adapter Powered with Battery Backup
Sensor Activated, 4” Centerset Lavatory Faucets

SF-2350 Series

Battery Powered, Sensor Activated
4” Centerset Lavatory Faucets

SF-2400 Series

Adapter Powered with Battery Backup,
Sensor Activated, Pedestal Style Lavatory
Faucets

SF-2450 Series

Battery Powered, Sensor Activated,
Pedestal Style Lavatory Faucets

LIMITED WARRANTY

Sloan Valve Company warrants its SF Series Electronic Hand Washing Faucets to be made of first class materials, free from defects of material or workmanship under normal use and
to perform the service for which they are intended in a thoroughly reliable and efficient manner when properly installed and serviced, for a period of one year from date of purchase.
During this period, Sloan Valve Company will, at its option, repair or replace any part or parts which prove to be thus defective if returned to Sloan Valve Company, at customer’s cost,
and this shall be the sole remedy available under this warranty. No claims will be allowed for labor, transportation or other incidental costs. This warranty extends only to persons or
organizations who purchase Sloan Valve Company’s products directly from Sloan Valve Company for purpose of resale. This warranty does not cover the life of the batteries.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY
RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.

PRIOR TO INSTALLATION

Prior to installing the Sloan SF Series Electronic Lavatory Faucet, install
the items listed below. Also, refer to the appropriate rough-in diagram.

Plug-In Adapter

•
Models SF-2100/SF-2200/SF-2300/SF-2400 only

electrical receptacle(s) for plug-in adapter(s) — 120 VAC, 1 amp
service for each 6 VDC plug-in adapter used.

International models may be supplied with a 220 VAC/VDC
transformer.

• Hot and cold water supply lines or tempered water supply line

• Drain lines

TOOLS REQUIRED FOR INSTALLATION

• Electric drill for drilling anchor holes (1/4” or 6 mm drill bit)

• Straight blade and phillips blade screwdrivers

• Open end wrenches (9, 11, 13, 16, 22 mm)

The components supplied with International Models of the SF Series Faucets may vary from what is shown in this manual. Consult factory to identify
variations that may apply to your market.

— Install

Important:

INSTALL ALL ELECTRICAL WIRING IN ACCORDANCE WITH

•

NATIONAL/LOCAL CODES AND REGULATIONS.
INSTALL ALL PLUMBING IN ACCORDANCE WITH APPLICABLE CODES

•
AND REGULATIONS.

A 6 VDC STEP-DOWN ADAPTER MUST BE USED FOR HARDWIRE

•
APPLICATIONS.

BEFORE CONNECTING COPPER TUBE(S) OR FLEX HOSE(S) TO

•
SUPPLY STOP(S), FLUSH ALL WATER LINES UNTIL WATER IS CLEAR.

FAUCET ROUGH-IN

TRIM PLATE

GASKET

24” (610 mm)

LONG FLEX HOSE

36” (914 mm)

LONG SENSOR

CABLE

SF-2100 / SF-2150 Series

SPOUT

RETAINER

2-1/8”

(54 mm)

1-1/4” (32 mm)
MIN. DIA. HOLE

REQUIRED

1-1/2” (38 mm) MAX.

DECK THICKNESS

CONTROL MODULE

3/8” COMPRESSION
CONNECTION

COPPER TUBE

OR FLEX HOSE

TEMPERED
SUPPLY

SF-2200 / SF-2250 Series

TRIM PLATE - Supplied with

SF-2200/SF-2250

Optional item for

SF-2200-INTL/SF-2250-INTL

GASKET

RETAINER

SF-2300 / SF-2350 Series

SPOUT

6-9/32”

(160 mm)

SPOUT

2-1/8” (54 mm)

1-1/4” (32 mm)
MIN. DIA. HOLE

REQUIRED

NUT

1” (25 mm) MIN.

1-1/2” (38 mm) MAX.

DECK THICKNESS

DIA. HOLE
REQUIRED

SIDE VIEW

(98 mm)

HOT AND COLD WATER
SUPPLY APPLICATIONS

HOT

SUPPLY

COPPER TUBES OR FLEX HOSES

3-7/8”

40°

some International Models.

4-1/2”

(114 mm)

BDM VARIATION (BELOW DECK

MECHANICAL) MIXING VALVE

3/8” (10 mm)

BAK-CHEK TEE

Flex Hoses Supplied Only with

-

10”

(254 mm)

COLD

SUPPLY

5-1/4”

(133 mm)

SLOTTED MOUNTING

WASHERS (2)

TRIM PLATE - Supplied with

SF-2400/SF-2450

SF-2400-INTL/SF-2450-INTL

27°

4-45/64”
(117 mm)

WING NUTS (2)

Optional item for

GASKET

RETAINER

SF-2400 / SF-2450 Series

2-1/8”

(54 mm)

SPOUT

1-1/4” (32 mm)
MIN. DIA. HOLE

NUT (1)

4-39/64”
(119 mm)

20°

1-1/2” (38 mm) MAX.

DECK THICKNESS

REQUIRED

1-1/2” (38 mm)

MAX. DECK
THICKNESS

4-1/2”

(115 mm)

20°

7”

(180 mm)

2

1A - SF-2100/2150 & SF-2400/2450

SERIES: INSTALL FLEX HOSE
AND MOUNTING STUD

Install Mounting

A

Stud.

Install Flex Hose.

B

1B - SF-2200/2250 & SF-2300/2350

SERIES: INSTALL FLEX HOSE

Install Flex Hose.

A

2A - SF-2100/2150, SF-2200/2250, & SF-2400/2450 SERIES: INSTALL SPOUT, TRIM

PLATE AND SPACER

Pedestal
Spout

Trim Plate

Pedestal
Spout

Trim Plate

Spacer

Pedestal
Spout

Trim Plate

Spacer

2B - SF-2300/2350 SERIES: INSTALL SPOUT

Spacer

Apply a bead of plumbers putty around the outside of the

A

Faucet underbody.

3