Sloan SF-2100, SF-2150, SF-2200, SF-2250 Maintenance Manual

Repair Parts and Maintenance Guide

SF-2100/SF-2150
SF-2200/SF-2250

PARTS LIST—SF-2100/SF-2150/SF-2200/SF-2250

Item
No. Code No. Part No. Description

1A. — — Pedestal Faucet Assembly w/Outlet (Models
SF-2100 and SF-2150)

1B. — — Gooseneck Faucet Assembly w/Outlet
(Models SF-2200 and SF-2250)

— 0362004 SFP-4 Mounting Hardware Kit, Pedestal Faucet (Models
SF-2100/SF-2150): includes Items 2A, 2B, 2C,

SF-2100
SF-2150

SF-2200
SF-2250

1A

1B

FOR

SF-2100/2150

2C

2D

3

4

7

2E

5A

SF-2200/2250

2A

2B

FOR

2D and 2E
— 0362005 SFP-5 Mounting Hardware Kit, Screws and Anchors for
Control Module (all models)
2A. — — Gasket
2B. — — Metal Retainer
2C. — — Threaded Studs (Models SF-2100/2150)
2D. — — Retainer Nuts (Models SF-2100/2150)
2E. — — Screws and Anchors for Control Module (all models)

3. 0362006 SFP-6 110 VAC/6 VDC Plug-In Adapter (US)

(Models SF-2100 and SF-2200)

4. — Batteries, 4 AA-size (all models)
5A. 0362040 SFP-40-A Control module w/ adjustable button

(6 pin connector)

5B. 0362008 SFP-8 Control module (Old Style 4 pin connector)*

6. 0362010 SFP-10 Flex Hose, Control Module to Spout (all models)

7. 0362045 SFP-45-A Inlet adapter – 1/2” NPSM to 3/8” compression

connection (not supplied with most
international models)

8. 0362011 SFP-11 4” Trim Plate with Spacer (all models)

9. 0362030 SFP-30A Faucet Extension Kit (Models SF-2100/2150)
10A. 0362041 SFP-41-A Sensor Assembly (6 pin connector)
10B. 0362034 SFP-34 Sensor Assembly (Old Style 4 pin connector)*

11. 3365461 ETF-617-A 3/8” Bak-Chek® Tee Compression Fitting

* IMPORTANT: Sloan added the range adjustment feature in August 2008 for faucets made prior to August 2008

use the following replacement parts: SFP-34 and SFP-8

NOT SHOWN SEPARATELY
— 0335029 EAF-51 0.35 gpm (1.3 Lpm) spray head (Models SF-2100/2150)

Faucets and

Soap Dispensers

— 0335012 EAF-15 0.5 gpm (1.9 Lpm) vandal resistant spray head
(Models SF-2100/2150)

9

5B

10A/10B

— 3362000 SFP-1000 0.35 gpm (1.3 Lpm) vandal resistant spray head
(Models SF-2100/2150)

— 0362012 SFP-12 Gooseneck Spout w/Outlet (Models SF-2200/2250)
— 0362013 SFP-13 0.5 gpm (1.9 Lpm) spray head (Models

SF-2100/2150)

— 0362014 SFP-14 Spray head for Gooseneck Faucet

11

13

(Models SF-2200/2250)
— 0362023 SFP-23 2.2 gpm (8.3 Lpm) Aerator (Models SF-2100/2150)
— 0362024 SFP-24 2.2 gpm (8.3 Lpm) vandal resistant aerator

12

6

(Models: SF-2100/2150)
— 0362020 SFP-26 220 VAC/6 VDC Plug-In Adapter (ASIA)
— 0362025 SFP-25 220 VAC/6 VDC Plug-In Adapter (EURO)
— 0362026 SFP-20 220 VAC/6 VDC Plug-In Adapter (UK)
— 3362022 SFP-22-A 8” Trim Plate

ACCESSORIES

12. 0362035 SFP-35-A 100-240 VAC/6 VDC Gang Adapter Kit,

includes 12A, 12B and 12C

12A

12B

12A. 0362016 SFP-36-A 100-240 VAC/6 VDC Plug-In Adapter
12B. 0362018 SFP-38 Cable Splitter, 51” (1300 mm) – 5 included in kit

12C

12C. 0362017 SFP-37 Cable Extension, 51” (1300 mm)

REPAIR PARTS

13. 0362015 SFP-15 Strainer (located in water inlet of control module)

8

— in Item No. column = Not shown in illustration
— in Code No. and Part No. column = Not sold separately

The information contained in this document is subject to change without notice.

202

Repair Parts and Maintenance Guide

SF-2100/SF-2150
SF-2200/SF-2250

TROUBLESHOOTING GUIDE CARE AND CLEANING

1. Faucet delivers water in an uncontrolled manner.

A. Faucet is not working properly. Contact Sloan Technical Support.

2. Faucet DOES NOT deliver any water when sensor is activated.
INDICATOR: Solenoid valve produces an audible “CLICK.”

A. Water supply stop(s) closed. Open water supply stop(s).
B. Water strainer in control module is clogged. Close supply stops and

remove water inlet line at control module. Remove, clean and reinstall
strainer and water inlet line. Replace strainer if required.

INDICATOR: Solenoid valve DOES NOT produce an audible
“CLICK.”

A. Batteries low (battery powered models). Replace batteries.
B. Power failure (adapter powered models). Check power supply.

3. Faucet delivers only a slow flow or dribble when sensor is
activated.

A. Water supply stop(s) are partially closed. Completely open water

supply stop(s).

B. Water strainer in control module is clogged. Close supply stops and

remove water inlet line at control module. Remove, clean and reinstall
strainer and water inlet line. Replace strainer if required.

C. Aerator is clogged. Remove, clean, and reinstall aerator. Replace

aerator if required.

D. Faucet is not working properly. Contact Sloan Technical Support.

4. Faucet DOES NOT stop delivering water or continues to drip after
user is no longer detected.

A. Faucet is not working properly. Contact Sloan Technical Support.

5. The water temperature is too hot or too cold on a Faucet
connected to hot and cold supply lines.

A. Supply stops are not adjusted properly. Adjust supply stops.

DO NOT USE abrasive or chemical cleaners (including chlorine bleach) to
clean faucet that may dull the luster and attack the chrome or special
decorative nishes. Use ONLY mild soap and water, then wipe dry with
clean cloth or towel. While cleaning the bathroom tile, protect the faucet
from any splattering of cleaner. Acids and cleaning uids will discolor or
remove chrome plating.

When assistance is required, please contact
Sloan Technical Support at: 1-888-SLOAN-14 (1-888-756-2614).

Faucets and

Soap Dispensers

203

The information contained in this document is subject to change without notice.