Sloan MCR-231-D User Manual

►► Code NumberCode Number

3375000

►► DescriptionDescription

Waterproof push button for use with any MICRO Plumb® controller.
Used on Acorn® and Willoughby® fixtures with “D” shaped hole.
May be used to activate flushometer, lavatory and shower
solenoids.

►► SpecificationsSpecifications

● ● 35 VDC Maximum

● ● 0.20 AMP Maximum

● ● Stainless Steel Housing

● ● .875-14 Thread – Major Diameter .8631/.8734

● ● 15’ Cord w/6 Position, 4 Connector RJ-11 Modular Plug

►► AccessoriesAccessories

● ● ETF-1003-72 6’ Single wire extension Cord Kit

● ● ETF-1003-108 9’ Single wire extension Cord Kit

● ● ETF-1003-240 20’ Single wire extension Cord Kit

● ● ETF-1003-600 50’ Single Wire Extension Cord Kit

● ● NOTE: The MCR-231-D Push Button cord can be extended to a
maximum length of 200’ using the above extension cord kits.

● ● Any other modifications will result in voiding the warranty.

►► VariationsVariations

● ● “A” = 7.28” 6” wall thickness

● ● “A” = 9.28” 8” wall thickness

● ● “A” = 11.28” 10” wall thickness

►► ROUGH-INROUGH-IN

Side View

Rear View Round Hole

►► Compliance & CertificationsCompliance & Certifications

This space for Architect/Engineer Approval

MICRO Plumb® PRODUCTS Push
Button Assembly
MCR-231-D

2016-11-04 Page 1 of 1

SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131 60131

Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: [phone] or 1-847-671-4380 ● http://www.sloan.com