Sloan G2 Optima Plus Maintenance And Repair Manual
Repair Parts and Maintenance Guide
3.2.1
G2 Optima Plus®Flushometer
SENSOR MODULE COMPONENT PARTS
Item
No. Code No. Part No. Description
1. 0325160 EBV-138-A G2 Cover/Ring/Sensor Assembly – Water Closet
0325161 EBV-139-A G2 Cover/Ring/Sensor Assembly – Urinal
0325166 EBV-149-A G2 Cover/Ring/Sensor Assembly – Water Closet
w/Zurn Ring
0325167 EBV-150-A G2 Cover/Ring/Sensor Assembly –
Urinal w/Zurn Ring
2. 0325168 EBV-142-A Cover Assembly
3. 0325172 EBV-130-A Override Button Assembly includes screws & hex
wrench
0325170 EBV-132-A Screws (2) and Allen Wrench Only
4. 0325169 EBV-131 Lens Window Cover
5. 0325804 EBV-14 Locking Ring CP
0325210 EBV-168 Locking Ring CP
3325524 EBV-31-A Locking Ring – for Zurn Valves
6. 3325450 EBV-129-A-C G2 Electronic Module – Water Closet
3325451 EBV-129-A-U G2 Electronic Module – Urinal
7. 0325171 EBV-134 Cover Rest Plate
8. 3325456 EBV-145-A G2 Inside Cover Assembly (includes solenoid)
(metal cover only)
3325089 EBV-1010-A Inside Cover Assembly (excludes solenoid)
9. 3325453 EBV-136-A Solenoid (For G2 Modules only)*
10. SEE CHART NEXT PAGE Flex Tube Diaphragm Kit
* Refer to Page 3.2.3 for instructions regarding solenoid replacement.
ACCESSORIES
11. 0325107 EBV-91 Trimpot Adjustment Screwdriver
12. 0305823 EBV-22 Strap Wrench
13. 0325170 EBV-132-A Allen Wrench
VALVE COMPONENT PARTS
14. 3323182 V-651-A Vacuum Breaker Repair Kit
15. 0393004 V-600-AA 3/4’’ x 9’’ CP Vacuum Breaker
0393006 V-600-AA 1-1/4’’ x 9’’ CP Vacuum Breaker
3393007 V-600-AA 1-1/2’’ x 9’’ CP Vacuum Breaker
16. 0306125 F-5-AW 3/4’’ CP Spud Coupling
0306140 F-5-AU 1-1/4’’ CP Spud Coupling
0306146 F-5-AT 1-1/2’’ CP Spud Coupling
17. 0308676 H-550 CP Stop Coupling
18. 0308801 H-551-A CP Adjustable Tailpiece 2-1/16’’ long
19A. 5308696 H-553 O-ring – 24 per package
19B. 5308381 H-552 Locking ring – 12 per package
20. 3308386 H-700-A 1’’ Screwdriver Bak-Chek®Stop CP – complete
3308384 H-700-A 3/4’’ Screwdriver Bak-Chek®Stop CP – complete
21. 3308853 H-541-A Control Stop Repair Kit
†
3308856 H-543-A Control Stop Repair Kit
‡
22. 0308612 H-622 CP Bonnet
†
0308843 H-577 CP Bonnet
‡
23. 3308772 H-1010-A Vandal Resistant Control Stop Cap Assembly
†
3308790 H-1009-A Vandal Resistant Control Stop Cap Assembly
‡
24. 3325816 EBV-1019-A 3/4’’ Decorative Stop Cap
3308866 H-574 1’’ Decorative Stop Cap
25. 3325814 EBV-1017-A Handle Cap — Metal
† For use with 1” and 3/4” H-700-A and 1” H-600-A Bak-Chek®screwdriver control stop
‡ For use with H-600-A 3/4’’ screwdriver Bak-Chek
®
control stops
4
5
7
10
A-3 Body
11
1
15
13
6
8
9
12
22
14
16
20
18
19A
19B
23
21
2
17
25
24
3
For use with Sloan’s G2 Optima Plus®Flushometer introduced May, 2003.
For older Optima Plus
®
Flushometers (produced from 1992 – 2003) and
Regal Pro
®
Optima Plus®Flushometers see pages 3.2.6 thru 3.2.11.
012010
Earlier model with
EBV-36-A body
For more Sloan parts and complete flush valves, visit:
www.ChicagoFaucetShoppe.com
Repair Parts and Maintenance Guide
3.2.2
082009
G2 Optima Plus®Flushometer
The Sloan Valve Company introduced its Optima Plus®battery operated
sensor Flushometer in 1992, revolutionizing the flushing of water closets
and urinals. In both new construction and retrofit applications, the use of the
Optima Plus has become the standard method for many facilities to improve
restroom hygiene and ensure handicap accessibility compliance.
In May, 2003 Sloan introduced the G2 Optima Plus.
The G2 Optima Plus builds on the success of the original product and offers
many technological advancements to further improve on performance and
reliability expected of sensor operated plumbing. In addition to a new
aesthetic design, the G2 Optima Plus features a new state-of-the-art
electronic and optical package and a unique solenoid operator that keeps the
moving components of the solenoid completely isolated from the water
supply. This ensures long life and low maintenance regardless of local
water condition.
The G2 Optima Plus replaces the original Optima Plus product, which was
phased out of production in mid-2003.
The Sloan G2 Optima Plus automatic battery powered Flushometer relies on
an infrared sensor to detect a user and activate a flushing cycle. No physical
contact with the Flushometer surface is necessary, assuring sanitary
protection. G2 Optima Plus Flushometers are ADA compliant devices.
The Flushometer is triggered by means of an active infrared sensor. The
Optima Plus sensor emits a continuous invisible light beam. When a user
enters the beam’s effective range, the beam is reflected into the Optima
Plus scanner window. The user is now detected. After the user moves out of
the effective range of the sensor, a signal is sent to the Flushometer
solenoid and, after appropriate arming and/or flush delays, the flush cycle
is initiated.
FLEX TUBE DIAPHRAGM KIT
Regulator
Code No. Part No. Description Color *
3325003 EBV-1023-A Urinal-0.5 gpf/1.9 Lpf
†‡
GREEN
3325000 EBV-1022-A Urinal-1.0 gpf/3.8 Lpf GREEN
3325000 EBV-1022-A Urinal-1.5 gpf/5.7 Lpf
†
BLACK
3325001 EBV-1020-A Urinal-3.5 gpf/13.2 Lpf
†
WHITE
3325031 EBV-1024-A Closet-1.28 gpf/4.8 Lpf GREEN
3325001 EBV-1020-A Closet-1.6 gpf/6.0 Lpf
†
GREEN
3325014 EBV-1021-A Closet-2.4 gpf/9.0 Lpf BLUE
3325001 EBV-1020-A Closet-3.5 gpf/13.2 Lpf WHITE
3325001 EBV-1020-A Closet-4.5 gpf/17.0 Lpf
§
WHITE
† EBV-1020-A and EBV-1022-A are supplied with multiple regulators.
‡ A 0.5 gpf (1.9 Lpf) urinal kit can be converted to a 1.0 gpf (3.8 Lpf) by cutting and removing the
smooth A-164 flow ring from the guide.
§ For a 4.5 gpf (17 Lpf) water closet flush use EBV-1020-A with the white regulator, and cut and remove the
A-164 flow ring from the guide.
* Color of regulator to be used with flex tube diaphragm to obtain the listed flush volume.
COVER
BODY
FLUSH CONNECTION
(VACUUM BREAKER)
SPUD COUPLING
LOCKING RING
STOP COUPLING
CONTROL STOP
SUPPLY FLANGE
TAILPIECE
OUTLET COUPLING
SPUD FLANGE
OVERRIDE BUTTON
O-RING
Code No. Part No. Description
5325056 EBV-83 O-ring – 6 per package
REGULATOR
O-RING
(Code No. 5325056)
0-RING
REGULATOR
(MUST BE
INSTALLED
PAST 0-RING)
FLEX TUBE
DIAPHRAGM
FLEX TUBE
DIAPHRAGM
REGULATORS
The flush volume of the flex tube diaphragm kit is controlled by the
regulator. Regulators are identified by color. Some flex tube diaphragm kits
are supplied with multiple regulators. The installer must make sure the
proper regulator is used when installing the flex tube diaphragm kit.
REGULATOR (SOLD 6 PER PACKAGE)
Regulator
Code No. Part No. Description Color
5325122 EBV-95 Urinal-0.5 gpf/1.9 Lpf GREEN
5325122 EBV-95 Urinal-1.0 gpf/3.8 Lpf GREEN
5325129 EBV-102-2 Urinal-1.5 gpf/5.7 Lpf BLACK
5325130 EBV-102-1 Urinal-3.5 gpf/13.2 Lpf WHITE
5325122 EBV-95 Closet-1.28 gpf/4.8 Lpf GREEN
5325122 EBV-95 Closet-1.6 gpf/6.0 Lpf GREEN
5325130 EBV-102-1 Closet-3.5 gpf/13.2 Lpf WHITE
5325128 EBV-101 Closet-2.4 gpf/9.0 Lpf BLUE
EBV-1020-A and EBV-1022-A are supplied with multiple flush volume regulators.
The installer must use the correct regulator when installing the kit.
For more Sloan parts and complete flush valves, visit:
www.ChicagoFaucetShoppe.com
Loading...