Sloan EAF-100-P-ISM-IC User Manual

►► Code NumberCode Number

3335008

►► DescriptionDescription

Sensor Activated Electronic Hand Washing Faucet for pre-tempered or hot and cold
water operation.

►► Flow RatesFlow Rates

1.5 gpm/8.3 Lpm Max. Flow Aerated Spray Head

►► SpecificationsSpecifications

Sensor Activated, Electronic, Chrome Plated Die-Cast Metal, Hand Washing Faucet with
the following features:

● ● Modular One-piece Construction with all Concealed Components above deck

● ● Appropriate Mounting Hardware included

● ● Automatic Self-adapting Sensor Technology

● ● Magnetic Solenoid Valve

● ● Water Supply Connection with Flexible High-pressure Hose and Strainer

● ● Double Infrared Sensors with Automatic Setup and Indicator Light

● ● Optional 24 Hour Sentinel Activation

● ● 6 Volt DC Plug-in Adapter (Included with (-P) faucets and must be ordered separately
with (-LT) faucets)

● ● ISM - Integral Spout Mechanical Mixing Valve (For Hot and Cold supply)

● ● Daisy Chain Electrical Splitter Cable included with Less transformer (-LT) faucets

►► VariationsVariations

☐ Plug-in Transformer

☐ IC i.q.-Click feature

►► The new Optima i.q. faucet — BringingThe new Optima i.q. faucet — Bringing

intelligence to waterintelligence to water

Sloan’s Optima i.q. EAF-100 Series electronic hand washing
faucets activates by means of a dual infrared sensor and
microprocessor based logic that utilize self-adapting
technology to ensure superior performance. The modular
design incorporates all of the operating components of the
faucet, including the sensor, solenoid and circuitry above the
sink within a die-cast metal spout.

ISM models feature an integral temperature control lever
which allows the user to adjust the water temperature. This
adjustment can also be converted to a fixed setting. EAF
faucets ordered without the ISM variation must be connected
to a single, pre-tempered water supply.

Optima i.q. EAF-100 series faucets are powered by a 6 VDC
plug-in adapter. Each plug-in adapter can supply power for
up to six (6) faucets by means of the Daisy Chain Electrical
Splitter (optional) with each (-LT) faucet.

►► Compliance & CertificationsCompliance & Certifications

ASME A112.18.1-2005/CSA B125.1-05, ISO/IEC 17025

This space for Architect/Engineer Approval

►► Control CircuitControl Circuit

6 VDC — Includes Auto Set Range Adjustment

►► Sensor RangeSensor Range

Nominal: 4” - 5” (102 mm - 127 mm)

Faucet Adaptive Self-adjustment Range: 2”-14” (51 mm -356 mm) nominal

►► Power SupplyPower Supply

120 VAC/6 VDC Plug-in Adapter

►► Time Out SettingTime Out Setting

2 minutes— Maximum time faucet will run upon continuous detection (except for i.q.­Click models that are otherwise set in continuous run).

►► Rough-in Dimensions (side view)Rough-in Dimensions (side view)

Optima i.q.® Faucet
EAF-100-P-ISM-IC

2016-11-04 Page 1 of 2

SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131 60131

Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: [phone] or 1-847-671-4380 ● http://www.sloan.com

►► ELECTRICAL CONNECTION FOR UP TO SIX (6) FAUCETS USING ONE (1)ELECTRICAL CONNECTION FOR UP TO SIX (6) FAUCETS USING ONE (1)

ADAPTERADAPTER

Optima i.q.® Faucet
EAF-100-P-ISM-IC

2016-11-04 Page 2 of 2

SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131 60131

Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: [phone] or 1-847-671-4380 ● http://www.sloan.com