Slant/Fin Lynx User Manual
T
his parts list must be left with owner, hung on or adjacent to
the boiler. Owner should retain parts list for fuure reference.
LYNX
Modulating Condensing Gas Boiler
Boiler Replacement Parts List
Item No. Description LX-85
1
2
3 TERMINAL COVER 84 3149 000
4
5 FRONT PANEL - REAR PART 84 3155 000
6 CONTROL PANEL - MAIN FRAME ASSEMBLY 84 3178 000
7
8 JACKET LEFT SIDE PANEL - ASSEMBLY 84 0142 000
9 JACKET RIGHT SIDE PANEL- ASSEMBLY 84 0143 000
0 PROPANE CONVERSION KIT (OPTIONAL PART) 84 0905 000
1
11 FLUE & AIR INTAKE CONNECTOR (PVC) 84 3528 000
13 JACKE TOP 84 3157 000
4 FRONT PANEL - ASSEMBLY 84 0144 000
1
15 JACKET - BRACKET FRONT 84 3158 000
16 JACKET FRAME BACK - SUBASSEMBLY 84 3177 000
7 JACKET BASE - SUBASSEMBLY 84 0149 000
1
18 BOILER LEGS (PACKAGE OF 4) 84 6915 000
9 SNAP BUSHING 50 0385 000
1
20 HEAT EXCHANGER ENCLOSURE FRONT COVER ASSEMBLY 84 0147 000
1 HEAT EXCHANGER ENCLOSURE ASSEMBLY 84 0150 000
2
22 GRO
23 BLOWER GASKET 84 3211 000
24 JUNCTION BOX, GAS AND WATER PIPES BRACKET COMBINATION ASSY 84 0151 000
25 GAS VALVE (WITH FLANGE) 86 3208 000
26 BLOWER 86 3215 000
27 GAS PIPE ASSEMBLY 84 0343 000
28 FLEXIBLE METAL HOSE 84 3331 000
29 VENTURI DAMPER - ASSEMBLY 84 3210 000
31 DRAIN VALVE 84 3417 000
32 WATER HIGH LIMIT 84 2411 000
33 WATER SENSOR 84 2410 000
34 SPARK IGNITOR GASKET (NOT SHOWN) 84 3217 000
35 SPARK IGNITOR 84 3218 000
36 HELICAL BUNDLING WRAP (FOR SPARK CABLE) (NOT SHOWN) 86 3608 000
37 STAINLESS STEEL PIPE ADAPTOR (OPTIONAL PART) 84 0907 000
38 OBSERVATION WINDOW (SIGHT GLASS) PACKAGE 84 6917 000
41 HEAT EXCHANGER 84 3430 000
42 FLUE SENSOR 84 3541 000
43 AIR INTAKE AND FLUE COLLAR 84 3505 000
44 BOILER PIPES PACKAGE 84 6916 000
45 FLUE PIPE - ASSEMBLY
46 CONTROL BOARD BRACKET 84 1146 000
47
48 BOILER CONDENSATE TRAP PACKAGE 84 6920 000
49 HONEYWELL VENTURI 84 3209 000
50
51 TERMINAL BLOCKS 6, 86 2602 000
52 ON/OFF SWITCH 86 2601 000
53 TERMINAL BLOCKS 8 86 2603 000
54 CONTROL BOARD 86 2607 000
55 DISPLAY - ASSEMBLY 86 2606 000
56 TRANSFORMER 24V, HONEYWELL 140B1297 66 0528 000
57 PRESSURE GAUGE ( INCL. CHECK VALVE) 86 3611 000
58
59
60 J6 CONNECTOR HARNESS (FOR BOILER LOOP AND DHW CIRCULATORS CONNECTION) 84 2105 000
61 J9 CONNECTOR HARNESS (FOR COMBUSTION BLOWER CONNECTION - CONTROL SIDE) 86 2106 000
62 J13 CONNECTOR HARNESS (FOR GAS VALVE TRANSFORMER AND GROUND, WATER HIGH LIMIT CONNECTION) 84 2108 000
63 BLOWER CONNECTOR HARNESS 86 2109 000
64 GAS VALVE CABLE 86 2104 000
65
66 GROUND WIRE 84 2100 000
67 CIRCULATOR NEUTRAL JUMPER 86 2110 000
70 VENT/AIR INTAKE TERMINATION KIT FOR PVC VENTING 84 0802 000
71
72 PRESSURE RELIEF VALVE, 3/4", 30Psi 65 0550 000
73 HEAT EXCHANGER ENCLOSURE BRACKET 84 3152 000
74 AIR DETECTOR - ASSEMBLY 84 3205 000
75 BURNER 84 3215 000
76 BURNER GA
78 OUTDOOR SENSOR KIT (12 kOhm) 86 3805 000
79 VENT/AIR INTAKE TERMINATION KIT FOR STAINLESS STEEL VENTING (OPTIONAL PART) 84 0804 000
GAS SHUT OFF VALVE 86 3803 000
JACKET FRONT PANEL COVER 84 3147 000
JACKET FRONT ASSEMBLY 84 0141 000
CONTROL PANEL - HINGE ASSEMBLY 84 3179 000
MMET FOR GAS PIPE 84 3204 000
84 3420 000
FLUE COLLECTOR - ASSEMBLY 84 3414 000
AIR/GAS MANIFOLD ASSEMBL
J2 CONNECTOR HARNESS (FOR ON/OF SWITCH, GROUND TERMINAL) 84 2107 000
J5 CONNECT
ARK CABLE
SP
CIRCULATOR TACO 0011 86 3804 000
OR HARNESS (FOR
CKET
Y
TER AND FLUE SENSORS, THERMOSTATS AND L.W.C.O. CONNECTION) 84 2103 000
A
W
84 3206 000
86 2101 000
84 3212 000
When ordering replacement par
For replacement parts, heating contractors should contact their Slant/Fin boiler distributor.
ts: specify the model number, serial number and gas by name ( natural or propane).
PUBLICATION NO. LX-10PL
607
.A.
inted in U
Pr
.S
Part No. 84 5738 000
3" Diameter Heat-F
OPTIONAL VENT SYSTEM PARTS
ab Saf-T EZ Seal venting system (AL29-4C stainless steel)
art No.
Description
6" long vent pipe 45 5020 000 9301
12" long v
18" long vent pipe 45 5022 000 9304
24" long v
37 1/2" long vent pipe 45 5024 000 9307
Elbow termination with screen 44 0678 000 7314TERM
Suppor
Support, 2" clearance 44 0692 000 7323GC2
Support clamp 44 0680 000 4327SS
45° elbow
©Slant/Fin Corp. 2007.
ent pipe
ent pipe
t, 6" clear
ance
P
45 5021 000 9302
45 5023 000
44 0679 000
45 5017 000
Heat-F
ab EZ Seal
art No.
P
9305
7323GCC
9311
art No.
Description
90° elbow, standard radius 45 5019 000 9314LR
mination with screen
TEE ter
Stainless steel pipe adaptor 84 0907 000
ent/air intak
V
Venting system 84 0804 000
Slip joint connector (6"-19") 45 5025 000 9324
Fire stop
90° elbow, tight radius 45 5018 000 9314
Wall thimble * (5"-8" Wall) 44 0695 000
aight ter
Str
mination for S.S.
er
T
e
mination with screen
P
44 0683 000 7390TEE
44 0685 000
66 0548 000
Heat-F
ab EZ Seal
art No.
P
5318CI
7392GC
SLANT/FIN CORPORATION, Greenvale, N.Y. 11548 • Phone: (516) 484-2600
(516) 484-5921
AX:
F
• Canada:
Slant/Fin
TD/L
L
TEE
, Mississauga, Ontar
www.slantfin.com
io
Loading...