Si-tex SP-80 Manual

SI-TEX MARINE ELECTRONICS INC

#800 - 11001 Roosevelt Blvd

St. Petersburg, Florida 33716

Phone [phone]

INSTALLATION and OPERATION MANUAL

SI-TEX SP-70 AND SP-80 AUTOPILOTS

Addendum 1

Wiring the Control Unit & Compass

(New Cable Colour Codes)

SP-80 AUTOPILOT

SP-70 AUTOPILOT

Document PN 29010049 V1.2

Addendum 1: Wiring the Control Unit & Compass 1

SI-TEX SP-70 & SP-80 Autopilot Systems

Introduction

There is an alternate new cable type for the SP-80 Control Unit cable and the Fluxgate

Compass cable. This cable has a different colour code than the original cable type,

although it is otherwise identical.

As well, there is now an alternate SP-70 Control Unit Receptacle cable, with a different

colour code than the original cable.

Starting with systems manufactured in the Summer of 2009, either the original or the

alternate type of cable may be used, for any of the items above.

As a result, the wiring information for the SP-70 Control Unit Receptacle cable, the

SP-80 Control Unit and the Fluxgate Compass, in the Installation & Operation manual

(PN 20910049, version 1.2, April 2004) must be revised.

Please use the next two pages of this Addendum, instead of pages 37 & 38 in the

current manual.

Document PN 29010049 V1.2

Addendum 1: Wiring the Control Unit & Compass 1