Sipromac VT-10000 User Manual
MASSAGERS
Models
VT-500 / VT-1000 / VT-2000 / VT-4000 / VT-6000 / VT-8000 / VT-10000
Heavy-duty
This stainless steel massager includes
high quality components such as a Busch
pump, which make it highly reliable.
User-friendly
Vacuum loading door (optional)*.
Unloading is made easy by reversing
the step-by-step motor.
Eciency
The continuous vacuum and smooth
motion make the process even more
ecient than a conventional tumbler.
Creative design
The blades’ helicoidal design provides
smooth and massaging action of food
products, all while keeping delicate
foods such as chicken and
seafood intact.
SIPROVAC
Easy maintenance
All components have smooth and
accessible surfaces and may be cleaned
in accordance with FDA and CFIA
standards.
* Not available on model VT-500
TM
SIPROSHRINK TMSIPROSEAL
Why should you use a massager?
• To marinate, coat, mix food products such as beef, pork, chicken
and seafood;
• To tenderize, enhance avor and keep food juicier with better
cure color.
TM
SIPROTHERMO TMSIPROINJEC
TM
SIPROMIX
TM
SIPROSMOKE
TM
SIPROFREEZE
TM
Machine dimensions
Inside of machine
b
a
New
MASSAGERS
CAPACITY
Width
MACHINE
DIMENSIONS
POWER SUPPLY Std. / Option.
PUMP
CAPACITY (STD)
MICROPROCESSOR
Height
Depth
VT-500 VT-1000 VT-2000 VT-4000 VT-6000 VT-8000 VT-10000
500 lbs. (227 kg) 1,000 lbs. (454 kg) 2,000 lbs. (907 kg)
92.31" / 2,345 mm 105.5" / 2,680 mm 153.5" / 3,894 mm
A
55.625" / 1,413 mm
B
37.19" / 944 mm 72.5" / 1,834 mm 74.25" / 1,885 mm 85" / 2,160 mm 89.25" / 2,264 mm 89.25" / 2,264 mm
C
120 Vac / 1 pH /
60 Hz
20 m3 0.9 kW 40 m3 2.0 HP 40 m3 2.0 HP 63 m3 3.0 HP 100 m3 5.0 HP 100 m3 5.0 HP 165 m3 7.5 HP
MC-40 MC-40 MC-40 MC-40 MC-40 MC-40 MC-40
Basic Features:
• Stainless steel construction: frame, cylinder,
accessories, etc.
• Cylinder reinforced with stainless steel ring
• Direct drive shaft system at the rear of the cylinder
(no chains, no belt)
• Stainless steel interior propeller for continuous
food massage
• Busch vacuum pump for continuous food massage
• Reversed rotation unloading mechanism
• Standard drain hole for cleaning purposes
• Water separator for pump protection
• Easy maintenance
• Microprocessor controlled (MC-40) for programming
continuous or intermittent operation time, rotation
speed, vacuum and start time
c
4,000 lbs. (1,814 kg)
165" / 4,200 mm 180" / 4587 mm 206" / 5,233 mm
75.25" / 1,908 mm 74.75" / 1,900 mm 83" / 2,099 mm 86.5" / 2,195 mm 86.5" / 2,195 mm
208-220 Vac /
3 pH / 60 Hz
208-220 Vac /
3 pH / 60 Hz
208-220 Vac /
3 pH / 60 Hz
6,000 lbs.
(2,724 kg)
208-220 Vac /
3 pH / 60 Hz
Optional Features:
(Available on selected models)
• Vacuum load
• Rear cleaning access
• Front cleaning access
• Load cell support
• Front door prop
• Front door prop and loading chute
• Multiple supply voltage available
• ETL, CSA, UL certication
All features are subject to change without notice.
8,000 lbs.
(3,632 kg)
208-220 Vac /
3 pH / 60 Hz
MC-40
10,000 lbs.
(4,540 kg)
202.5" / 5,146 mm
90.875" / 2,308 mm
90.875" / 2,308 mm
208-220 Vac /
3 pH / 60 Hz
Check out our other products
by visiting our website:
www.sipromac.com
Phone: 819 395-5151 | Toll Free: 1 855 395-5252 Canada/U.S.
Email: sipromac@sipromac.com
240, boulevard Industriel, Saint-Germain-de-Grantham QC, Canada J0C 1K0
Loading...