SINGER W1630 User Manual
oyvcy
INSTRUCTION MANUAL
FOR
SEWING MACHINE
WHIITE
WHITE SEWING MACHINE COMPANY
Record In space provided below the Serial No. and
Model No. of this appliance.
The Serial No. Is located on Bed Plate.
The Model No. Is located on Rating Plate.
Serial No.
Model No.
Retain these numbers for future reference.
Name of Parts
Accessories
Before sewing (Power supply and Sewing lamp)
Take out extension table, free arm sewing
Winding the bobbin
Removing bobbin case and bobbin.....................
Inserting bobbin into bobbin case
Inserting bobbin case into shuttle race, .
Threading upper thread & Twin needle threading. . . .
Drawing up bobbin thread...................
Changing sewing directions
Control dial & Adjusting thread tension
Regulating the presser foot pressure
Drop feed
Changing needle
Fabric. Thread. Needle table...................................
Sewing (pattern selector) and operation table ....
To start sewing
To finish seam
Straight stitch.
Zigzag sewing .
Overcasting . .
Stretch stitch .
Blind stitch . ,
Button sewing.
Binding
.............
Zipper sewing....
Button hole sewing
Hemming
.................
Twin Needle.............
Embroidery
Quilter
................
Seam guide
.Maintenance (Cleaning and oiling)
Checking Performance Problems WHAT TO DO
....................................
..............................
........................
.................
......................
..............
........................................
................................
................
...................................................
..........................
’
.........................
..............................
CONTENTS
...............
. . 1 &2
.........................
3
.........................4
.........
5
.........................
6
.........................7
.........................7
.........
8
. ■ . 9
... 10
... 10
11&12
• ■ ■ 13
■ ■ . 13
. . . 14
. . . 15
. . . 16
. . 17
. . 18
. . .19
. .19
. ,20
. 20
21
& 22
. .23
. .23
■ • 24
• -25
■ ■ 26
■ • 27
■ . 27
• -28
■ -28
■ 29
■30
NA ME O F P AR T S (F RO N T VI EW )
1 Pattern selector dial
2 Pressure regulator
3 Take up lever
4 Thread tension dial
5 Presser foot
6 Shuttle cover
^ Extension table
8 Sub-spool pins
9 Top cover
10 Zigzag width dial
11 Stitch length dial
12 Reverse button
13 Thread guide for upper threading
(RE A R VI EW )
Bobbin winder spindle
AC CE S SO R IE S
Bobbin V
Felt
Zigzag foot
(On machine)
Button hole foot
Zipper foot
Button hole cutter
Screw driver
Needle
#11 #14
BEFORE SEWING
Mac In
1. Fit the machine plug into
the machine.
Power supply 2. Plug the machine to the
power supply.
3. Sewing speed can be varied
by the speed controller.
1. Remove or install bulb from
inside of face cover.
2. Open face cover in direction
of arrow.
3. Remove bulb by unscrewing
it counter clockwise.
4. Install a new bulb by screw
ing it in clockwise.
5. Use a screw type bulb with
120V/15W, (Max)
REMOVING EXTENSION TABLE
FREE-ARM SEWING
1. Hold the left end of table
and pull out in direction
of arrow.
1. Especially useful when sewing
sleeves, pants leg, tubular
fabrics etc more easily.
2. To sew tubular just slip the
sleeve or pants leg on the free
srm as shown sbove.
3. This sewing machine can be
used as a flat bed machine,
but easily converts to free
arm machine by removing the
extension table.
WIN D IN G T HE B O BB IN
Bobb
winder
spindle^ ■
1. Release stop motion knob.
2. Thread as shown.
3. When bobbin is filled,
tighten stop motion knob.
5cm thread
Push bobbin winder spindle
in direction of arrow.
When bobbin winding is com
pleted return swindle to
original position.
When bobbin winding is in
correct, release the screw of
upper thread guide and ad
just up or down until bobbin
winding is balanced.
■ 'Oft 5cm of thread
tom bobbin and insert it
bobbin case as shown.
spring
- o.ui ana under
‘®os.on spring and draw
Z.r^' - -
Loading...