SINGER 148-5 User Manual
SINGER
148-5
Form 18406
January, 1930
PRINTED IN U. 8. A.
LIST
OF
PARTS
INDEX
PAGE
AcCBSSOniES......................................................................................................................................
Belt Guard...............................................................................................
Foot Lifter Parts..................................................................................
Iron Base.................................................................................................... !'■!
Machine No. 148-5........................................................................
Numerical List OP Parts...................................................................... L?
Parts Required to Chance Gauge of Machine
Thread Unwinder..................................................................................... 21
.........................
'-'.I
MACHI NE No. 14 8-5
THE SINGER MANUFACTURING COMPANY
INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONIjY the imrt NflMBKU
in the FJIIST eohiinn.
Tiic number stamped on a Sevrdng Macdiine part is in every
case the number of the single part only.
Every eeimbmation of parts sent out as such has its speeifie
number, whieh, altliough not stamped on the parts, must I)c
used when ordering the eombiuation.
Each number always indicates the SAME PART in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, a.s follows:
A—Hardened, Polished, Nickel I’lated ;iud PutTed
R—I’oUshed, Nickel Plated ami Buffed
('—Hardened Only
D-Polished Only
li—Soft, Not Polished
F—Hardened and I’olished
H—Blued
.1-Nickel Plated Only
K—Hardeneil and Nickel Plated
L—Brass Plated
M—Oxidi/.ed
N—.Japanned, Dull
P—.Japanned, Jlright
R—Merlized
T—t^opper J'lated
T, A.--Hardened, Polished, Oopper and Nickel Plated
anti BulTed
T. B.—Copper and Nickel J’lated and I’olished
T. .J.—Cojjper and Nickel Plated Only
T. K.—Hardened, Copper and Nickel Plated
T. M.—Copper Platecl and Oxidized
T. L.—Copper and Brass Plated
ft—Zinc J’lated
V—Silver Plated
\V—I’olishcd and Nickel Plated
Z—Chromium J’lated
Z. B,—I’olished, Nickel Plated, Buffed and Chromium Plated
Z. J.—Nickel and Chromium Plated
These letters MJ'ST BE J'SED wlien they appear in f he list;
and A1<’TER the number as in the list.
In this .scries;
1 to 1500 and .50001 to 51.500 are Screw Numbers
1.501 to 1800 and 51.501 to 51800 arc Nut Numbers
1801 to 2000 and 51801 to 52000 are Roller Numbers
2001 to 50000 and 52001 and upward arc numbers of
Machine Parts
The figures in the. second column refer only to the plates,
illustrating the parts, and arc NOT TO BE USED in ordering.
Parts marked with an .asterisk (*) arc furnished oidy when
repairs are made at factory.
When ordering parts which differ as to Gauge (the dislance
between .se.ams) the Gauge, as well as the Number must be
given on order.
LIST OF PARTS COMPLETE
FOR
MACHINE No. 148-5
FOR SEAM COVERING ON KNIT GOODS, UNDERWEAR, ETC.
TWO NEEDLES ONE LOOPER, GAUGES Vg, AND
INCHES. DROP FEED, FOOT LIFTER.
FORMERLY 148 SV3 MACHINE
T'U.xrn
N1).
Pisotll
.51!) 13 9110
54914
,54915
) 9117
502231
OKU
91 Iv
B538I) 9101
.54910 9101
1443d 9101
54,897 9101
—
Arm................................................................
“ Back Cover
.Arm Back Cover eornplete, Nos. ]5.'18n,
—
.5022:in, .51913, .54915, .54911) and two
1443i)
Arm Back Cover Batch wdth 91lio...............
!)I01
........................................................
“ “ “ “ Hinge Screw....
“ “ “ “ Screw Stud
“ “ “ “ “ “ Thumb
Nut.............................................................
Arm Back Cover S|)ring
“ “ “ “ Screw
“ Oil Cup
....................................................
N Ml U
..............................................
...............................
......................
.L /lOfi
........
8 PAirrS FOR MACHINE No. 118-5
FARTS FOR MACHINE No. 148-5
NO. PI.ATR NAMB
128002 9119 Arm Rock Shaft...............................................
128003 9101 “ “ “ Rushing (hark)
....................
437c 9118 “ “ “ “ “ S e t
Screw
........................................................
128001 9101 Arm Rock Shaft Rushing (front)
........................
888c 9118 “ “ “ “ “ Sc t
Screw
........................................................
54919 9101 Arm Rock Shaft Rushing (inicrinediatc)
60224c 9118 “ “
Set Screw
..................................................
54921 9101 Arm Rock Shaft Collar with two 450c. .
450c 9101 “ “ “ “ Set Screw
128202 9122 “ “ “ Crank (hack) will) two
50083c, for 128204...................................
128000 9122 Arm Rock Shaft Crank (back) with two
50083c, for 128021...................................
50083c 9142 Arm Rock Shaft Crank (hack) Set Screw
.128007 9109 “ “ “ “ (front) with two
A 50135c
......................................................
50135c 9142 Arm Rock Sfijift (.trank (front) .Set Screw
50010 9141 “ Side Cover...............................................
280d 9118 “ “ “ Thumb Screw
.......................
12821)4 9141 Crank Connecting Rod complete, Nos.
217d, 1722)e, 172«e, 54010, 51925,
65034 and 128207.....................................
*64925
--------
Crank Connecting Rod (rod only)
...................
61043c 9122 “ “ “ Rail Screw Stud
1597b 9118
Nut.............................................................
07425 912f2 Crajnk Connecting Rod Rail Screw .Stud
Nut Lock Washer......................................
*64012
-----
Crank Connecting Rod Cap (lower)
890f, 9117
Screw
........................................................
*128205 —■— Crank Connecting Rod Cap (upper)
171e 9117
Screw.........................................................
*54014 --------■ Crajnk Connecting Rod End Rearing
(lower)
......................................................
*128200
*54010
*128207
---
Crank Connecting Rod End Roulng
(iiPI>er)
--
Crank Connecting Rod lloid (lower)
....................................................
Nos. 54012, 54014 and two 890e
------
Crank Connecting Rod Head (np|)er)
..............
Nos. 51043c, 128205, 128200 and two
171e..........................................................
.........
NO. J’EATE NAME
1722e 9122 Crank Connecting Rod Nut (lower)....
1723e 9122 “ “ “ “ (ui)i)er)....
550.34 9101 “ “ “ Position Plate
217i> 9117
.Screw
........................................................
*128270 ------Cylinder wit h 4.52i , 40()c, .5()h50o, 51004,
128032, 128033 iuid two 391n
.51020 9101 Cylinder Jlowel Pin
128341 9141 “ End Cover
12.8342
-------
Cylinder End (.lover eom])lete, No.s.
............................................
............................................
.................
128341, 128344, two 128013, throe
1231,1 and four 405n
128013 9101 Cylinder End Cover Loek Spring
..............................
.....................
405n 9118 “ “ “ “ “ Screw
*128343
-------- “ “ “ Slide (hack)...................
128344 9142 “ “ “ “ “ 128343
Avith 51027 and 128315
...........................
•50999f 9117 Cylinder End Cover Slide (hack) .Sfo|)
.Screw........................................................
*1283-45
------
Cylinder End Cover Slide (front)
.....................
51027 9102 “ “ “ “ “ Hinge
Pin..............................................................
1231.1 9118 Cylinder End ('oyer Slide (front) .Screw
128277 9141 “ Rock .Sh.aft
................................
128015 9102 “ “ “ Rushing (l)ack). . ..
1126c 9118 “ “ “ “ “ Set
.Screw
........................................................
128010 9102 Cylinder Rock Shaft Rushing (front ). . .
220n 9117 “ “ “ “ “ Set
.Screw........................................................
128017 9102 Cylinder Rock Sluift Crank with two
1253c
.........................................................
12.53c 9102 Cylimlor Rock Shaft Crank Set Screw, .
128018 9102 “ “ “ Connection with
128019, 128020 and two each 152e and
175f...........................................................
128332
128333
------
Cylinder Rock .Shaft Connection 128018
Avith 128038, 128011 and 128277
------
Cylinder Rock Shaft Conneelion 128332
with 1281)1,5, 128122 and 12,8311)
..........
........
*12.8019 — Cylinder Jtoek Sliaft ('onni'clion Cap
(hirge)........................................................
152e 9102 Cylinder Rock .Shaft Connection Cap
(large) Screw.............................................
*128020
------
Cylinder Rock Shaft Connection Caj)
(small)
.......................................................
10 PARTS FOR MACHINE No. 148-5
PARTS FOR MACHINE No. 148-5
11
NO. rfjATK NAME
175e 9102 (Jylinder Rock Sii.'ift Connection (kip
(smiill) Screw...........................................
128021 9141 Cylinder Rock Shaft Connectins Rod
ronii)lcfe, Nos. 1722e, 1728f,, 128022,
128025 and 128020...............................
12S022
-------
(Cylinder Ro(dc Shaft, (Jotinecfin}' Rod
(rod only)..................................................
50730c 9102 Cylinder Rock Shaft ('onnectiiiK Rod
Rail ScrcAv Stud (lower)
.........................
1664e 9118 Cylinder Rock Shaft Connecting Rod
Rail Screw Stud (lower) Nut
....................
50731c 9102 Cvlinder Rock Shaft Connecting Rod
Rail Scnwv Stud (u]ipcr)..........................
1597e 9118 Cylinder Rock Shaft Connecting Rod
*128023
Rail Screw Stud (ui)per) Nut
------
Cylinder Rock Shaft Connecting Rod
...................
Cap (lower)...............................................
, 171e 9117 Cylinder Rock Shaft Connecting Rod
Cap (lower) Screw
...................................
*54613 -------- Cylinder Rock Shaft Connecting Rod
Caj) (uijpcr)..............................................
171e 9117 (.lylinder Rock Shaft Connecting Rod
Ca|i (upper) Screw....................................
*128024
*55032
------
Cylinder Rock Shaft Connecting Rod
End Rearing (lower)
.................................
-------- Cylinder Rock Shaft. Connecting Rod
End Rearing (iipiier)
................................
125601 -------- Cylinder Rock Shaft Cotinecting Rod
End Rearing (u])i)cr) 55032 with 51613
128025
and two 171b
------
Cylinder Rock Shaft Connecting Rod
............................................
Head (low'cr) Nos. 50730o, 128023,
128024 and tw’o 171e..............................
128026
------ Cylinder Rock Shaft Connecting Rod
Head (upper) Nos. 217n, 50731c, 5.5034
and 125601
...............................................
1722e 9122 Cylinder Rock Shaft Connecting Rod
Nut (lower)
...............................................
1723b 9122 Cylinder Rock Shaft Connecting Rod
Nut (upper)
...............................................
55034 9101 Cylinder Rock Shaft Connecting Rod
Position Plate............................................
217i) 9117 Cylinder Rock Shaft Connecting Rod
Position Plate Screw
128027 ——■ Cylinder Rock Shaft Eccentric
.................................
.....................
50589c 9109 “ “ “ “ Regulating
Screw
........................................................
NO. 14,ATE NAME
198i) t)109 Cylinder Rock Shaft Eccentric Set Screw'
134i) 9117 “ Screw
...................................................
128199 9122 “ Thread Eyelet...............................
128200 9122 “ “ “ Thread Guard
662i) 9122
Screw
........................................................
1102i) 9117 Cylinder'Phread Eyelet Screw
128030 9102 “ “ Gu.ard
13021)9118 “ “ “ Screw
.........................
..............................
..................
128031 9103 “ “ Tube.................................
12,8032 9103 “ Top (.'over (back)
................................
.54664 9109 “ “ “ “ Hinge Fin
460c 9118
Set Screw
..................................................
128033 9103 Cylimh'r 'Pop Cover (front i with 233>n
3t)ln 9118 Clylinder'Pop (.'.over (front) ,Scnwv
and 12,4034
..............................................
................
128031 9109 “ “ “ “ Spring
2331)9117 “ “ “ “ “ Screw
12,8035 9141 Face Plate
128036
--------
P'ace Plate coiui)lcte. Nos. 621 ii, 55184
.........................................................
and 128035
...............................................
46111 9102 Face Plate Pin..............................................
551,84 9101 “ “ 'Phread Guide
62Id 9118 “ “ “ “ Screw
............................
...................
286d 9118 “ “ 'Phiinib Screw............................
50732c 9117 P’ced .\djusting ScreAV (eccentric.)
173,5.1 9118 “ “ “ Nut
................
.............................
12,8278 9144 “ Dog, 13 teeth (16 teeth to the inch)
No'J’e: When ordering No. 128278 slate gauge
rcipiirod.
50128c 9117 Feeil Dog Screw'...............................................
128038 9112 “ Conncctiug Rod with 128039 and
two S96e....................................................
*128039
*128010 —“ Piccontric
-----
Feed Connecting Hod Cap
...............................
896e 9117 “ “ “ “ Screw'
............................................................
..............
128041 9109 Feed liccentric (adjustable) conipli'te.
Nos. 198i), ,50589c, 128027, 128040 and
128174
*128174
--------
Feed Ecceidric, Rody with tw'o 1143c. . .
......................................................
1143c 9109 “ “ “ Set Screw......................
128042 9109 “ Lifting Piccentrie with two 462c.. .
128122 — - “ “ “ 128042 with,54tt.53
462c 9118 “ “ “ Set Screw
128043 9112 “ “ Lever
.......................................
................
...
12 PARTS FOR MACHINE No. 148-5
PARTS FOR MACHINE No. 148-5
13
NO. PLATE
54953 9141
*54940 —
896b 9117
50997c 9117
1722b 9122
128044
128045
54958
12804C
128047
128048
i42833
128049
128050
128051
128052
50733c
128053 9122
128054 9142
50150c 9142
128055 9102
50150c 9142
*128334 --------
128335 9137
50084c 9122
128336 9143
128340
128.388 9142
9102
9122
452c
9109
9102
9109
9141
9145
448c
9102
9102
9142
453c
9102
9143
9102
9102
9117
9118
1735J
-------
54968 9112
41128 9142
888c 9118
NAME
Feed Lifting Lever Connecting Rod witli
54940 and two 896e
Feed Lifting Lever Connecting Rod Cap
<< << U i< U ((
Screw
........................................................
.................................
Feed Lifting Lever Connecting Rod I lingc;
Screw (eccentric)......................................
Feed Lifting Lever Conner ting Hod Hinge
Screw Nnt
Feed Lifting Lever Hinge Pin
.................................................
......................
“ “ “ “ “ Set Screw
“ Rcgnlator
“ “ Friction S|iring
“ “ Pawl with two 45ilc. .. .
................................................
.........................
“ “ “ Lever with 448c:. .
“ “ “ “ vSet Screw..
“ “ “ “ Stud
“ “ “ “ “ Spring
“ “ “ Set Screw
.................
“ “ “ Shaft
“ Rod
.........................................................
Connecting I/ink (left)
“ “ (rightl
...............
............................
“ “ Hinge Screw
Nut.
Feed Rod Hinge Bracket with 5()L5()c. .
“ “ “ “ Hinge Pin...
(( (C <{ << (t U
Screw
........................................................
Feed Rod Hinge Pin
“ “ “ “ Set Screw
Hand Wheel
-
.....................................
...................
..................................................
“ “ and Pulley, Nos. 128334,
128337 and two 50084c
Hand Wheel and Pvdiey Set Screw
“ “ “ “ Sh.aft
...........................
.............
..................
“ “ “ “ “ 128336
with 54616................................................
Hand Wheel and Pulley Shaft Bushing
(right)........................................................
Hand Wheel ami Pulley Shaft. Bushing
(right) Oil Pad (hraided cotton)
...............
Hand Wheel and Pulley Shaft Bushing
(right) Set Screw
......................................
Hand Wheel and Pulley Shaft Flanged
Bushing (left)
...........................................
NO. I’l.ATB NAME
42365 9142 Hand Wheel and Pulley Shaft Flanged
Bushing (left) Oil Pad (hraided cotton)
445c 9122 Hand Wheel and Pulley Shaft Flanged
Bushing (left.) Set Screw'
.........................
1,50d 9142 Hand Wheel and Pulley Shaft Screw... .
51970 9101 “ “ “ “ “ Washer..
128283 9145 J.oop Cuard (needle thread)
.........................
128284 9145 “ “ “ “ Holder with
51091c, 51095c and two 1607e
................
51095c 9145 Jjoop Cuard (needle thread) Holder Ad
justing Screw" (lower)
..............................
1607e itl45 Loop (tuard (needle thread) Holder Ad
justing Screw (lower) l.ock Nut
...............
51094(' 9t45 Loop Cuard (needle thread) Holder Ad-
ju.st.ing Screw (upper)
.............................
1607b 9145 Loop Cuard (needle Hire,ad) Holder Ad
.
justing Screw' (upper) Tajck Nut
.............
128285 9145 Loop (tuard (needle thread) Holder
..
.
128286
--------
Bracket
......................................................
Loo]) Cuard (needle thread) Holder
Bracket 128285 with 233n, 1 Kil.i,
504251), 128283, 128284 and 128287...
]85i> 9117 fjoop Cuard (needle thread) Hohler
Bradict. Screw'
.........................................
50425d 9145 Loop Guard (needle thread) Holder
Hinge Screw'.............................................
128287 9145 Loop Cuard (needle thread) Holder
Spring........................................................
233d 9117 Looj) Cuard (needle thread) Holder
Sjiring Screw
............................................
1161.1 9145 T.oop Guard (needle thread) Screw...............
128405 i)142 Looper
128406 9142 “ Carrier with 1454c
.............................................................
................................
1454c ttl42 “ “ Clamping Screw......................
197i) 9142 “ Screw.....................................................
.54708 9112 Needle Bar (hollow)
..........................................
128281 --------Needle Bar conij)lete, Nos. 54708 and
128282
......................................................
54710 9142 Needle Bar Bushing (lower)..........................
,563c (»118 “ “ “ “ Set Screw..
54710 9142 “ “ “ (ui)pcr)
.....................
■563c ttll8 “ “ “ “ Set Screw..
*.54711 9145 “ “ Connecting Link.....................
128126
------
“ “ “ “ 54711 with
.54712 and 128118....................................
54712 9145 Needle Bar Connecting Link Hinge Stud
14 PARTS FOR MACHINE No. 148-5
PARTS FOR MACHINE No. 148-5
NO. PLATE NAME
1520J 9118 Noodle Bar ConnccUng Link Hinge stud
Nut............................................................
128117 9145 Needle Bar Connecting Stud with 207e.
207e 9145 “ “ “ “ Claiuping
Screw
128118
---
— Needle Bar (Connecting Stud complete,
........................................................
Nos. 220n, i:i32n, 54716, 128117,
128119 and 128120
..................................
128119 9145 Needle Bar Thread Retainer............................
128120 9145 “ “ “ “ Bracket
220o 9117
Screw
54716 9145 Needle Bar Thread Retainer Spring
........................................................
................
1332d 9145 “ “ “ “ “ l^erew
128282 9145 “ Clamp with twm 209f...........................
128407
128408
M28409
------------
------------
“ Guard
..............................................
“ “ Holder
..................................
______ “ “ “ 128108 with 5022.5,г
and 128407
...............................................
18.5d 9117 Needle Guard Holder Screw...........................
5022.5.Г
-----------
“ “ Serew
209f 9145 “ Set Screw
...................................
..............................................
.5.5084 9146 Presscr Bar (lorver).............................
128064 9146 “ “ “ Bushing
..........
563c 9118 “ “ “ “ Set Screw..
128005 9146 “ “ (upper)
.........................
128060 9146 “ “ “ Guide Bracket with
440c...........................................................
440c 9146 Presscr Bar (upper) Guide Bracket Set
Screw'........................................................
128007 9140 Pressor Bar Connecting Bracket witli
448c and 453c...........................................
448c 9145 Pres.ser Bar Connecting Bracket Set
Screw (tong)
.............................................
453c 9142 Prosser Bar Connecting Bracket Set
Screw' (.short)
128068 9140 ITcsser Bar Lifter
..........................................
...............................................
128009 9146 “ “ “ Connecting Link
50116F 9117
Hinge Screw (long)
..................................
108f 9117 Pres.ser Bar liifter Connecting Link
Hinge Screw' (short.)................................
50415c 9117 Pre.sser Bar Lifter Hinge Screw
2269 9146 “ “ “ Stop Pin (lower)
2049 9146 “ “ “ “ “ (upper)
128070 9103 “ “ Lifting Lever
.......................
...............
...........
............................
128071 9112 “ “ “ “ ExteiKsion
NO. PLATE .NAME
161c 9117 Pressor Bar Lifting I^cvor Extension
Screw.........................................................
S66i) 9117 Presscr Bar luffing Lever Hinge Screw'.
184i) 9145 “ “ “ “ Stop Screw..
128072 9103 “ “ Spring (ПаО
........................
.54722 9146 “ “ “ Stud..............................
128288
--------
128289
“ Fool
--------
“ “ Compensating Plate with
...................................................
128308.......................................................
128308 9144 Presscr I’oot Compensating Plate Pin.. .
14058 9144 “ “ “ “ Spring
128290 9144 “ “ “
Ga|)............................................................
337d 9131 Pre.sser I'ool. Com|)ensating Plate Spring
Cap iScii-w................................................
34318 9144 Presscr Foot Compensating Plate Stop
I’in.............................................................
128291 9144 Pre.sser Foot (compensating) complete,
Nos. 337i), 34318, 128288, 128290 and
tw'o each 140.58 and 12828!)
...................
Note : When ordering No. 128291 state gauge
rc(piircd
lUOi) 9117 I’resser I'ool, Screw'........................................
50132w' 9118 Prc.ssure Uegulating Thumb Screw'
...............
L543w9118 “ “ “ “ Lo(L
Nut.............................................................
Ч28337
---------
Puilc}', 2')i in. diam..........................................
128292 9145 Scam Guide
......................................................
1174.Г 9145 “ “ Screw...........................................
128075 9147 Tension (under Ihreadi Br.acket.......................
176n 9117 “ “ “ “ Screw..
2102 9131 “ “ “ Disc
..................
51570c 91.31 “ “ “ Regulating
ThumI) Nut
...............................................
12807ti 9147 Tension (under thread) Releasor.........................
233d 9117 “ “ “ “ Adjust
ing .Screw
50076d 9117 Tension (under thread) Releaser Hinge
Screw'
........................................................
32572 9131 Tension (under thread) Rel(\a.siug Disc..
128077 !)103 “ “ “ “ Lever
6.3824 9131
Spring
........................................................
1144d 9117 Tension (under tiiread) Releasing Lover
Spring Screw'.............................................
128078 9131 Tension (under thread) Hole,ising Pin.. .
10 PARTS FOR MACHIXF No. US-5
PARTS FOR MACIIIXF, Xu. MS-5
NO. PLATE NAME
50320c 9131 'I'ension (unilor Ihifiiil) Sciew Stud
59539
--------
50320c Midi 51570c.................................
59534 9131 Tension (under tliread) Sprini;
........................
59537 9131 “ “ “ “ Bushins
(lai'se).......................................................
59538 9131 Tension (under Ihread) Sprius Bushins
(small)
......................................................
17547 9131 Tension (under tlirea«!) 'Fhread (iuide. .
128079 9103 “ (upper tliread) Bracket, with t,wo
447c
..........................................................
370d 9118 Tension (upper fhread) Bracket Screw. .
128080 9147 “ “ “ “ Thread
Eyidct (douhlel
.........................................
330n 9118 Tension (ujuier direail) Bracket 'I’liread
Eyelet Screw.............................................
128081 9131 Tension (u|)per threadl Bracket 'I’hread
Eyelet Screw Washer
2102 9131 Tension (upper thread) Disc
...............................
....................
51570c 9131 “ “ “ Resulatins
Thumb Nut
...............................................
32572 9131 Tension (upper threadl Rcleasins Disc..
12S07S 9131 “ “ “ “ Pin.
54989 9147 “ “ “ “ Shaft
128082 9147
Crank witli 452c
.......................................
54873 9147 Tension (upiier tliread) Rcleasins Shaft
Crank Link................................................
110c 9117 Tension (ipiper Ihread) Rcleasins Shaft
Crank Link Hinge Sennv
.........................
452o 9122 Tension (upper thread) Releasing Shaft
Crank Set Screw.......................................
128105 9121 Tension (iipiier thread) Relcasiug Shaft
Spring
.......................................................
310c 9118 Tension (upper thread) Releasing Shaft
Stop SereM’..............................................
1547.1 9118 Tension (ii[ii)er thread) Releasing Shaft
Stop Screw' Nut........................................
50320c 9131 Tension (upper thread) Screw' Stud
59539
59530 9131 Tension (up|icr thread) Spring
----50320c with 51570c
.................................
...........................
59537 9131 “ “ “ “ Bushing
(large)
.......................................................
69538 9131 Tension (upper thread) Spring Bushing
(small)
......................................................
17547 9131 Tension (upper fhread) Thread Ouide...
NO. I'l.ATF, NAME
12s0.s:i 9I 13 Tension Releasing .\nn w it h 5ISI8
.........
12,4081 9113 “ “ “ Coiuiectiug Rod
L521e 9118
Xut.............................................................
1131c 9117 Tension Releasing Ann I Luge Screw. . .
51818 9117 “ “ “ Roller and Sei'ew
Stud
...........................................................
128085 9115 Thread (iinderl Eyelet.........................................
020c 9118 “ “ “ Set Screw
..................
128081) 9117 “ “ Xi])per()am with til 121
128087
12,8088
and two 105i'
-------
Tliread (iiudi-r) Xipper (lain Oil Pad
(fell)
-------
Thread (under) Xipper Cam Oil Pad
Holder
.............................................
..........................................................
.......................................................
128089 9117 Tlin'ad (under) Xi))per Cam Oil Pad
Holder 1280,88 with 12,8087...................
105c 9110 'Fhread (under) Xipper ('am Set, Screw .
128090 9117 “ “ “ Spring (lower) . .
12.8293 9117 “ “ “ “ (u|)per)..
334ii 9118 “ “ “ “ Screw...
12823,8 9118 “ “ Protector
228n 91 17 “ “ “ Screw
..........................
.....................
128291 911.8 " “ Pull-off.............................
220i)tlll7 “ “ “ .Adjusting Screw
01121 9110 “ “ “ Posit ion Pin. . .
12.8295 9M8 “ “ “ Stripjier
...............
20311 9117 “ “ “ “ Scri'w.
12S290 911,8 “ “ 'Fake-ii|) with two Iti5c
Note; When ordering Xo. 128290, stale gauge
r(4|uir('d.
1282 hi 9113 'Fhread (under) 'Fake-iip F'i'aiue
128298
------
'Fhread (under) 'Fake-up Frame compiei e,
Nos. 128105, 12,8213 and 128'299
........................
..........
‘РЗ.ЗЗ’Ю 9113 'Fhread (under) 'Fake-up Frame Cover
with 50150c...............................................
128105 9118 'Fhread (under) 'Fake-up Frame Covi-r
1 linge Pin.................................................
.50150c 9112 'Fhread (under) 'Fake-up F'rame Cover
Hinge Pin Set Screw
.................................
11 I9i) ill 15 'Fhread (under) 'Fake-iip Frame Screw . .
128210 9118 “ “ “ Knife
.................
F2,8217 9118 “ “ “ “ Holder
with 105c...................................................
185i) 9117 'Fhread (under) 'Fake-up Knife Holder
Screw.........................................................
IS-lOCi—2
Loading...