SINGER 148-4 User Manual

Form 18405 Miuxh, 1930

I'UINTED IN U. H. A.

LIST

PARTS

MACHINES

Nos. 148-4 and 148-7

THE SINGER MANUFACTURING COMPANY

BY Thjb Singer Manupacturinq Company

Alh Rights Reserved for all Countries

INDEX

PAGE

Accessories................................................................................................... 37

Belt Guard.................................................................................................... 37

Foot Lifter Parts......................................................................................... 37

Iron Base....................................................................................................... 36

IjAP Seam Feller Parts.............................................................................. 38

Machine No. 148-4............................................................................... 7

“ “ 148-7..................................................................... 22

Numerical List of Parts............................................................................ 41

OusoLETE Parts............................................................................................ 39

Thread Unwinder......................................................................................... 38

INSTRUCTIONS FOR ORDERING

. 7

In ol'derinfi from tliis list, use ONLY tlie part NUMBER

in (lie i'IRST cokiiim.

'Pile number stamped on a Sewing Machine part is in every

case tlie number of the single part only.

Every combination of parts sent out as such has its specific number, which, although not stam])ed ou the parts, must be used wlu'ii ordering the combination.

Each nuniher always indicates the SAMl'i PART in whatever

list it a|>pears, or for whatever machine.

I'he letters after some of the numbers indicate the style of

finish only, as follows:

.V—Hardened, I’olished, Nickel Plated and Buffed

B—Polisheil, Nickel I’lated and Buffed

('—Hardened Only

I)—Polished Only

E—Soft, Not Poli.shed

P—Harilencd and Polished

H -Blued

.1—Nickel Plated Only

K—Hardened and Nickel Plated

L—Bra.ss Plated

M —O.xidi/.ed

N—Japanned, Didl

P—Japaimed, Bright R—Merlized T—(\jp|)er Mated

T. j\.—Haidened, Polished, Copper and Nickel Plated T. B.—Copper and Nickel Plated and Polished

T. ,1.—Copper and Nickel Plated Oidy

T. K.—Hardene<l, Co[)i)ei'and Nickel Plated

T. .M.—Copper Plateil and O.xidized

T. L.—Cupper and Brass Plated

Z. B.—Polished, Nickel Plated, Buffed and Chromium Plated

Z. ,1.—Nickel and Chromium Plated

These letters MUST BE USED when they appear in the list;

and AFTER the number as in the list.

In this series:

'I’lie figures in the second column refer only to the idates,

illustrating the pails, and uie NOT TO BE USICD in ordcjing.

Parts marked with an asterisk (*) are furnished only when

repairs ;ire m:ide at factory.

When ordering |)aris which differ iis to Gauge (the distance

between sisuns) the Cange, as well as the Number must be

given iiu oi’tlcr.

amt Buffed

U—Zinc Plated

V—Silver Plated

t\'—Polished and Nickel Plated

'/.—Chi'oininm Platerl

1 to bnlK) and htlOOI to 51500 are Screw Numbers 1501 to ISOU and 51501 to 51800 are Nut Numbers IbOl l(j 2000 and 51801 to 52000 are Roller Numbers

20t)l to 5000(1 and 52001 ami upward are nuinbeis of

M:ichine Parts

LIST OF PARTS COMPLETE

FOR

MACHINE No. 148-4

FOR THREE LINE STITCHING ON HEAVY OVERALLS AND WORK

OF A SIMILAR NATURE. THREE NEEDLES, THREE LOOPERS, DOUBLE CHAIN STITCH. GAUGES IN., IN.,

l- i IN., i, IN. AND 3% IN. BETWEEN EACH NEEDLE. DROP

FEED, FOOT LIFTER.

FORMERLY 148SV2 MACHINE

NO. 1'LA.TB N.XitK

*128196 --------Arm...................................................................

5B)i:i 9119 “ Back Cover 51914

--------

Arm Back Cover complete. Nos. 1538i),

.502230, .51913, 54915, .54916 and two

54915 9101 Arm Back Cover Latch with 911b

502231) 9117 “ “ “ “ Hinge Screw.. ..

911k 9101 “ “ “ “ Screw Stud

L538i) 9101

54916 9101 Arm Back Cover Spring..................................

14431) 9101 “ “ “ “ Screw

14430........................................................

Tlumih Nut

.............................................

..................

...............................................

..................

bssa

8 PARTS POR MACHINE No. 148-i

PARTS FOR MACHINE No. 148-4

NO. ri..\TK N.\MB

51897 9101 Arm Oil Cup.....................................................

128002 9119 “ Rock Shaft ..............................................

128008 9101 “ “ “ Bushing (back)

............

4:i7c 9118 “ “ “ “ “ Set Screw

128004 9101 “ “ “ “ (front)

888c 9118 “ “ “ “ Set Screw 54919 9101 “ “ “ “ (intermediate) 50224c 9118 “ “ “

Set Screw

..................................................

51921 9101 Arm Rock Shaft Collar with two 456c. .

456c 9101 “ “ “ “ Set Screw

128262 9122 “ “ “ Crank (back) with two

50083c, for 128264...................................

128006 9122 Ann Rock Shaft Crank (back) with two

50083c, for 128021...................................

50083c 9104 Arm Rock Shaft Crank (ba(P) Set Screw

128007 9109 “ “ “ “ (front) with two

50135c.......................................................

50135c 9104 Arm Hock Shaft Crank (front) Set Scrmv

51)016 9123 “ Side Cover...............................................

286i) 9118 “ “ “ Thund) Screw

.......................

128264 9124 Crank Connecting Rod complete, Nos.

217n, 172210, 172310, 54616, 54925,

55034 and 128267

....................................

*54925 Crank Connecting Rod (rod only)

51013c 9122 “ “ “ Ball Screw Stud

1.59710 91 18

Nut............................................................

67125 9122 Crank Connecting Hod Ball Screw Stud

*51612

-----------

Nut Lock Washer

Crank Connecting Hod Cap (lower) ....

.....................................

896io 9117 “ “ “ “ “ Screw

*28265 ■' “ “ “ (miper). . . .

171e till? “ “ “ “ “ Screw

*54614 “ “■ “ Pnd Bearing

(lower)

......................................................

*128266

*54616

*12821)7

------

Crank Connecting Rod End Bearing

(upper)

......................................................

--------

Crank Connecting Rod End Head (lower)

Nos. 54612, 54614 and two 896io

------

(.hank Coniiectiiig Rod Head (ii|)per)

...........

Nos. 51013c, 128265, 128266 and two

17110........................................................

1722io t)122 (hank Connecting Hoil .Nut (lower). . . .

1723E 9122 “ “ “ “ (up|)cr)....

55034 9101 “ “ “ Po.siti<)ii Plate...

217u 9117 •“ “ “ “ “Screw

...

.........

...

NO. I't.ATB NAME

*128197

------

Cylinder with 447c, 452c, 460c, 50150c,

54664, 128032, 128033 and two 391n. .

54620 9101 Cylinder Dowel Pin

128306 9124 “ End Cover

...........................................

128270 ------ Cylinder End Cover complete. Nos.

128128, 128306, two 128271, three

128305

1231W and four 405u

-------

Cylinder End Cover complete, 128270

..............................

with 1174w, 36586, 36598 and two 211w, for li in. to A in. gauges

128271 9122 Cylinder End Cover Lock Spring

................

...................

405i) 9118 “ “ “ “ “ Screw

*54625

-------

“ “ - “ Slide (back)

....................

128128 9102 “ “ “ “ “ 54625

with 54627 and 55165..............................

50999b 9117 Cylinder End Cover Slide (back) Stop

Screw........................................................

*55165

------

Cylinder End Cover Slide (front)

....................

54627 9102 “ “ “ “ “ HiiiKC

Pin.............................................................

1231w 9118 Cylinder End Cover Slide (front) Screw

128198 9124 “ Rock Shaft

.................................

128015 9102 “ “ “ Bushing (back)....

1125c 9118 “ “ “ “ “ Set

Screw

........................................................

128016 9102 Cylinder Rock Shaft Bushing (front)...

220u 9117 “ “ “ “ “ Set

Screw

........................................................

128017 9102 Cylinder Rock Shaft Crank with two

12.53c.......................................................

1253c 9102 Cylinder Rock Shaft Crank Set ¿»crew. .

128018 9102 “ “ “ Connection with

128019, 128020 and two each 152b and 175b

.........................................................

128272 ------ Cylinder Rock Shaft Connection 128Ü18

*128019

with 128038, 128041 and 128198

------

Cylinder Rock Shaft Connection Cap

...........

(large).......................................................

152b 9102 Cylinder Rock Shaft Connection Cap

(large) Screw............................................

*128020 -------- (lylinder Rock Shaft Connection Ca])

(small)

......................................................

175e 9102 Cylinder Rock Shaft Connection Cap

(snudi) Screw

...........................................

128021 9124 Cylinder Rock Shaft Connecting Rod

complete, Nos. 1722b, 1723b, 128022,

128025 and 128026..................................

PAiri'S TOR MACRIINE No. 148-1

PARTS E'OR MACHINE No. 148-4

NO. PL-\TK NAME

128022

--------

('yliiultT Hoi'U SliaR ( à)iuu'(4infi Rod

(rod urdy)..................................................

5()7:i0c 9102 ((ylirider Rock Shaft Connect iiif!: Rod

ItitilE !MI8 Cylinder Rock Shaft (.’onnectiiifi Rod

507lili; 9102 Cylinder Rock Slud't Connectinti Rod

1597e9118 Cylinder Rock Shaft Connecting Rod

*128023

*51013

*128021

*550:12

125ti01

128025

128020

55031 9101 Cylinder Rock Shaft Connecting Rod

128027

50589c 9109 “ “ “ " Regulating

128199 9122 “ Thread Eyelet

128208 “ “ “ 128199 with 002n,

------

--------

------

--------

------

1722e 9122 Cylinder Rock Shaft Conmaiting Rod

1723e 9122 Cylinder Rock Shaft Connecting Rod

217n 9117 Cylinder Rock Shaft Connecting Rod

------

198i) 9109 Cylinder Hock Shaft Kccinitric Set Screw Bl-in 9117 “ Screw

liatl Screw Stud (lower)

Ball Screw Stud (lower) Nvil...................

Ball Screw Stud (ujiper)...........................

Bull Screw Stud (upper) Nut....................

Cylinder Rock Shaft Connecting Rod

Call (lower)...............................................

171e 9117 Cylinder Rock Shaft Connecting Rod

Cap (lower) Screw....................................

Cylinder Rock Shaft Connecting Rod

Cap (upper)...............................................

171k 9117 Cylinder Rock Shaft Connecting Rod

(lap (upper) Screw

Cylinder Rock Shaft Connecting Rod

Knd Bearing (lower)

Cylinder Rock Shaft Connecting Rod

Knd Bearing (upper)

Cylinder Rock Shaft Connecting Roil

Knd Bearing (upper) 55032 with 51(ii:!

and two I7Ie

Cylinder Rock Shaft Connecting Rod

Head (lower), ,Nos. 507:i0c, 128023,

128021 and two 17Ik...............................

Cylindi“!' Rock Shaft ('onnecling Rod

Head (n)i|)er), Nori. 2l7n, 507:ilo, 55031 and 125001

Nut (lower)

Nnt (upper)

Position Plate............................................

Position Plate Screw'................................

Cylinder Rock Shaft Eccentric

Screw.

128200 and 128211...............................

.............................................

...............................................

.......................................................

...................................................

.............

....................................

................................

....................................

........................

...............................

NO. en.vno NA.ME

128200 9122 Cylinder Thread Eyelet Thread Guard

002n 9122 “ “ “ “

1402n 9117 Cylinder Thread Eyelet Screw

128030 9102 “ “ Guard

1302n 9118 “ “ “ Screw......................

128031 9124 '• “ Tube 1280:12 9124 “ Top Cover (back)

51004 9109 “ “ “ “ Hinge Pin..

liiOc 9118 “ “ “ “ “ “I’et

128033 9123 Cyliiulcr Top Cover (front) with 2:Йи

iiOln 9118 Cylinder Top (tover (front) Screw

128031 9109 “ “ “ “ Spring

2:13d9I17 “ “ “ “ “ Screw

128201 9123 Face Plate

10111 9102 “ “ Pin...............................................

2801)9118 “ “ Thumb Screw

507.12c 9117 h'eed Adjusting Screw (eccentric)

17:15j 9118 “ “ “ Nut...........................

128202 9125 “ Dog, 10 teeth (8 teeth to the inch)

12,s:i l8 9120 Feed Dog, 18 t eeth (16 teeth to the inch)

128:109 9125 Feed Dog, 18 teeth (lOteeth to the inch)

128112 970:i Feed Dog, 12 teeth (8 teeth to the inch)

Хо'гк: When ordering Nos. 128202, 128348, 128:509

50128c 9117 E’oed Dog Screw

1280:18 9112 “ Connecting Rod with 128039 and

*]280:!9

*128010 - - “ Eccentric

128011 9109 Feed Kecentric (adjustable) complete,

*128174 ------ Feed Eceentrie Body with two 1143c. . .

128203 9122 “ Lifting Eccentric with two 462c.. .

128273 - “ “ “ 128203 with 51953

------

89(iK 9117 “ “ “ “ Screw

I113c 9109 “ “ “ Set Screw.....................

Screw........................................................

'and 128»;i4

for >8 in., ii in. and h in. gauges bet ween needles

for 3g in. and 64 in. gauges between needles

for 18 iu. and Й in. gauges between needles

for 5 s in., ii in. and -3^3 in. gauges beIwaieu needles, for heavy worlcpT

and 128112, .state gauge.

t wo 890e..................................................

l''eed Connecting Rod Cap..............................

Nos. 198d, 50589c, 128027, 128040 and

128174......................................................

...............................................

........................................................

.............................................

........................

...................

.....................

....................

..................

...............................

.............

......................................

.........

..............

....

12 PARTS KOR MACIIINR No. 14S-4

PARTS FOR MACHINE No. 148-4

NO. PLATE NAME

R)2c 9118 Peed Piftiiig Pecentiie Set Screw......................

1280-i:i 9112 “ “ Lever

...................................

549.53 9109 “ “ “ Connecting Rod with

*54910

54940 and two 890e

-------

Feed Lifting Lever Connecting Rod Cap

.................................

891)10 9117 Screw

........................................................

50997c 9117 Feeil Lifting Lever Connecting Rod

Hinge Screw (eccentric)...........................

1722e 9122 Feed Lifting Lever Connecting Rod

Hinge Screw Nut

128044' 9102 Feed Lifting Lever Hinge Pin

......................................

................

452c 9122 “ “ “ “ “ Set Screw

128045 9109 “ Regulator

54958 9102 “ “ I'riction Spring.

.............................................

........................

128040 9109 “ “ Pawl with two 4,53c. .. .

128047 9123 “ “ “ Lever with 44Sc.. .

448c 9110 “ “ “ “ Set Screw. .

128048 9102 “ “ “ “ Stud

42833 9102 “ “ “ “ “ Sjn-ing

4,5)ic 9110 “ “ “ Set Screw 128049 9102 “ “ Pawl Sliaft P28050 9112 “ Rod

......................................................

128051 9102 “ “ Connecting Link (l('ft)

1280.52 9102 “ “ “ '■ (right)

...................

.....................

.............

...........

50733c 9117 “ “ “ “ Hinge S.'rew

173,5.1 9118 “ “

Nut............................................................

128053 912'2 Feed Hod Hinge Bracket with ,50150c. ,

1280.54 9127 “ “ “ “ Hinge Bin, . . .

501.50c 9110 “ “ “ “ “ “ Set Screw

1280,5.5 9102 Feed Rod Hinge Bin

50L)0(; 9110 “ “ “ “ Set Screw

*128334

------

Hand Wheel

........................................................

........................................

.............

.....................................................

1283:15 9137 “ “ and pidiey, Nos. 1283.'14,

128337 and two ,50084c

50084c 9122 Hand Wheel and I'ulley Sel Screw B28:i:i0 9128 “ “ “ “ Shaft B28340

------

“ 128330

with 54010

................................................

..........................

...................

......................

128275 -------- Hand Wheel and Bulley SInd't 128310

will) 128045, B28272 and 128273

..........

54908 9112 Hand Wheel and Bulley Shaft Bu.shing

(I'iglit).......................................................

41128 9127 Hand Wheel and Bulley Shaft Bushing

(right) Oil Bad (Braided cotton)

..............

NO. PLATE NAME

888c 9118 Hand Wheel and Pulley Shaft Bushing

(right) Set Screw

......................................

128388 9127 Hand Wheel and Pulley Shaft Flanged

Bushing (left)

...........................................

42305 9127 Hand Wheel and Pulley Shaft i’langed

Bushing (left) Oil Pad (braided cotton)

445c 9122 Hand Wheel and Pulley Shaft Flanged

Bushing (left) Set Serew

..........................

l,50i) 9127 Hand Wheel and Pulley Shaft Screw....

54970 9101 “ “ “ “ “ Washer...

128413 9127 Looper (back)..............................................

128414 9127 “ (centre) 128415 9127 “ (front)

.............................................

...............................................

128349 9127 “ Carrier with 1454c, for 128351

and 128413

...............................................

128350 9127 Looper Carrier for 128351 and 128414. . 128351

------

“ “ (double adjustable), Nos.

128349 and 128350..................................

...

128208 9127 Looper Carrier (single) with 1454c, for

128415......................................................

1454c 9127 Looper Carrier Clamping Screw

223i) 9127 “ Screw

54708 9112 Needle Bar (hollow)

................................................

........................................

......................

128209 ------Needle Bar complete, Nos. 54708 and

128215......................................................

.51710 9129 Needle Bar Bushing (lower)

...................

.5(Hc 9118 “ “ “ “ Set Screw..

51710 9129 “ “ “ (upBor)...................

,5t)3c 9118 “ “ “ “ Set Screw.

*51711 9120 “ “ Connecting Link..................

128271 “ “ “ “ 547_y. with

51712 and 128210

....................................

54712 9129 Needle Bar Connecting Link Hinge Stud

1.5'20,i 9118 “ “ “ “ “ “

Nut............................................................

12S117 9129 Needle Bar Connecting Stud with 207e.

207e 9129 “ “ “ “ Clamping

Screw........................................................

128210 ------ Needle Bar Connecting Stud complete,

Nos. 220u, 10107, 128117, 128211,

128213, 128214 and two each 42348

and 128212

...............................................

128211 9129 Needle Bar Thread Retainer Bracket

will) two 238d..........................................

2201)9117 Needle Bar 'I'hread Retainer Rracket

Serew........................................................

и РЛН'ГН FOR МЛСШКЕ No. 118-4

PARTS FOR MACHINE No. 148-4

NO. 1'1,.VTF. N.\MK

42818 9129 Needle Bar Tliread Retainer lli.se

...............

128212 9129 “ “ “ “ ¡Separating

Disc...........................................................

10107 tll29 Necaile Bar Thread Retainer Spring .. .

128218 9129 “ “ “ “ Stud

...........

288n til29 “ “ “ “ “ Set

Screw

........................................................

128214 tll29 Needle Bar Thread Retainer Thread

(Inide.........................................................

2:i8n 9129 Netalle Bar 'I'hread Retainer Tlmaul

(inide Set Screw........................................

128215 9129 Needle (Slain]» with three 1498t'

....................

.Noth; When ordering No. 128215, state gauge.

128852 9129 Needle Guard for 3% in- nnd in. gauges 128210 9129 “ “ “ I s in., A in. and 3^^ in.

giniKCS

....................................................

NoTi;: When ordering Nos. 128210 and 128852

state gauge.

4 17<; tills Needle Guard Set Screw

1498f til29 “ Set Screw

........................................................

55084 til80 I’re.sser Bar (lower)

128004 til80 “ “ “ Blushing

..................................

........................

.........

508c tills “ “ “ “ Set Screw..

128005 til28 “ “ (upper)

........................

128000 9180 “ “ “ Guiile Bracket with

440c

..................

........................................

410c 9104 Presser Bar (up]ier) Guide Bracket Set

Screw

........................................................

128007 9110 Pre.sser Bar Gounecting Bracket with

448c and 45i!c

..........................................

41Sc lillO Pre.s.ser Bar Gounecting Bracket Set

Screw (long)

.............................................

458c 9110 Presser Bar Gounecting Bracket Set

Scre.w (short)

128008 liPiO Pre.s.ser Bar Lifter

...........................................

..........................................

1280(19 til80 “ “ “ Gounecting Link

50110Ftill7

lliugi! Screw (lower)

................................

108f 9117 Pri'sser Bar lafter Gounecting Link

Hinge Screw' (ujiper)

50115c 1(117 Presser Bar Lifter Hinge Screw

...............................

......................

2209 9180 “ “ “ Sto]» Pin (lower)..............

2019 9180 “ “ “ “ “ (u]iper)

128070 9128 “ “ Lifting Lever

..............................

..........

128071 9112 “ “ “ “ Extension

NO. rL.ITE NAME

lOlc 9117 Pra.sser Bar Lifting Lever Extension

Screw........................................................

8OO1) 9117 Presser Bar Lifting Lever Hinge Screw..

1841) 9180 “ “ “ “ Stop Screw...

128180 9128 “ “ Spring (flat)

54722 9130 “ “ “ Stud

128188

-------

“ Loot Leveling Plate

Noie: AVhen ordering No. 128188, state gauge.

..........................

...........................

......................................

11184 9129 Presser Foot Leveling Plate Hinge Pin.. 128307 9129 “ “ “ “ Spring 128217

----

“ “ Needle Plate

No’I'k: When ordering No. 128217, state gauge.

........................

128191 9129 Presser Foot Needle Plate S]»ring

..........

.............

055c 9139 “ “ “ “ “ Screw.

128308 9129 “ “ “ “ “ Stop

1808J 9129

Screw

........................................................

128192 Presser Foot Plate

...............................

No'rF,: When ordering No. 128192, state gauge.

128193 Presser Foot Shank

..............................

,50591c 9118 “ “ “ Screw.............................

128219 9120 Presser Foot (hinged) com])lete, for Ls in.,

iTi in. and Y2 in. gauges. Nos. 1308.1, 11181, 128188, 128192, 128198, 128217, 128:107, 128808 and two each 005c, ,50594c and 128191

,\'о'ге; When ordering No. 128219, state gjuige.

128:15:5

------

Presser h'oot Leveling Plate

Хо'ге: When ordering No. 128358, state gauge.

.................................

............................

11184 9129 Pres.ser Foot l,eveling Plate Hinge Pin.. 128410 9127 “ “ “ “ S|»ring 12S:i54

---------------

No'I’e: W'hen ordering No. 128354, state gauge.

“ “ Needle Plate.........................

128191 9129 Pre.sser Foot Needle Plate Spring

.........

...........

005c 9l:i9 “ “ “ “ “ Screw.

128:108 9129 “ “ “ “ “ Stop

18ti8.i 9129

Screw........................................................

128355

-------

Presser Foot Plate

Note: When ordering No. 128355, state gauge.

............................................

U) PARTS FOR MACnlNK No. 148-4

PARTS FOR MACHINE No. 148-4

NO. l'I,.\TK N.^.ME

128856

--------

Prosser Foot Shank

50594c 9118 “ “ “ Screw

...........................................

.............................

128357 9126 Prosser F'oot (hinged) conipleto for 3-3 in.

ani-1 e’l ill. gauges, Nos. 1368i, 11184, 128353 to 128356, 128368, 128416 and two each 665c, 50594 and 128191

...........

Notk: When ordering No. 128357, stale gauge.

128370 ------Pre.s.ser Foot laiveling Plate

............................

Noth; Wluai ordering No. 128370, state gauge.

11184 9129 Pres.ser Foot Ijoveling Plate Hinge Pin.. 128417 9127 “ “ “ “ Spring 128371 “ “ Needle Plato

...........................

.........

NoTc; When ordering No. 128371, state gauge.

128372 9129 Prosser F’oot Nitedle Plate Spring (left)

665c 9139

Screw

........................................................

128368 9129 Prosser F'oot Needle Plate Spring (left)

St(jp...........................................................

1368j 9129 Prosser Foot Needle Plate Spring (lefl)

St()|) Sci'ew...............................................

128373 9129 Pre.s.ser F’oot Needle Plate Spring (I'ight)

665c 9129

Screw

........................................................

128371

-------

Pres.ser F’oot Plate

..........................................

XoTi:: When ordering No. 128374, stale gauge.

128356

-------

Pressor F'oot Shank

50591c 9118 “ “ “ Screw

..........................................

.............................

128375 9126 Pri'.s.ser F’oot (hinged; complete for in.

iind jfi in. gauges. Nos. 1368t, 11181,

128356, 128368, 128370 to 128374,

128417 and two each 665c and 50594c

.NoTC. When ordering No. 128375, state giiuge.

I9O1) 9117 Presser F’oot Screw.........................................

50132w 9118 Pressure Regulating Thunih Screw

.................

1543w9118 “ “ “ " I.ock

Nut

............................................................

*128337

------

Pulley, 2)“ g in. diaiu.......................................

128220 9128 Tension (iitider thread) Bracket......................

428269

-------

“ “ “ “ 128220

with 233i), 1144n, 500761), 63824,

128077, 128221, 128222 and two 337n.

176n 9117 'I’ension (under lliread) Bracket Screw..

2102 9131 “ “ “ Disc

.....................

NO. I“LATE NAME

51570c 9131 Tension (under thread) Regulating

Tlunnh Nut

...............................................

128221 9131 Tensioti (under thread) Releaser (lower)

233d 9117

Adjusting Screw

.......................................

50076d 9117 Tension (under thread) Releaser (lower)

Hinge Screw.............................................

128222 9131 Tension (under thread) Releaser (upper)

337i) 9131

Screw

........................................................

32572 9131 Tension (under thread) Releasing Disc

128077 9P28 “ “ “ “ Lever

63824 9131

Spring

.......................................................

11 Flu 9117 Tension (under thread) Releasing Lever

Spring Screw

............................................

128078 9131 Tension (under thread) Releasing Pin...

50326c 9131 “ “ “ Screw Stud................

59539

-------50326c with 51570c

.................................

59534 9131 d’ension (under thread) Spring........................

59537 9131 “ “ “ “ Bushing

(large)

.......................................................

59538 9131 Tension (under thread) Spring Btisiiing

(small)

......................................................

17547 9131 Tension (under thread) Thread Guide

128223 9135 “ (upper thread) Bracket with

three 447c

.................................................

376n 9118 Tension (upper thread) Bracket Screw ..

128224 9131 “ “ “ “ Thread

Eyelet (double).........................

................

330u 9118 Tension (upper thread) Bracket Thread

Eyelet Screw.............................................

128081 9131 'I’ension (upper thread) Bracket Thread

Eyelet Screw Washer

...............................

2102 9131 Tension (upper thread) Disc............................

51570c 9131 “ “ “ Regulating

Thunili Nut

...............................................

32572 9131 Tension (upper thread) Releasing Disc... 128225 9131 “ “ “ “ Pin... 128-226 9135 “ “ “ “ Shaft P28-227 9131 “ “ “ “

Collar with two 735c................................

735c 9131 Tension (upper thread) Releasing Shaft

()ollar Set Screw.......................................

128228 9132 Timsion (ujtijer thread) Releasing Shaft

Crank witli 457c.......................................

I’AirrS FOK МА(Л1ШБ No. 148-1

HAITI’S FOR MACHINE No. 148-4

NO. 1>L.\TE

54878 9182

128229 9182

88()d 9118

5IO8I0 9181

110c 9117

457c 9182

89802 9182

170n 9181

5082()C 9181

59589

------

59580 9181

59587 9181

59588 9181

17547 9181 128088 9185 128081 9185

1521c 9118

1181c 9117

51818 9182

128280 9182

020c 9118

128887 9182

8851) 9118

128285 9182

128087 ------

128088 ------

128089 9182

405c 9188 128280 9181 128287 9181

NAME

'reiLsioii (up|)er llircad) Keleasiiii; Shaft

Crank Link................................................

Tension (upper thread) Reloa.sing Shaft

Crank Link Hracket

..................................

d’ension (upper thread) Releasin';; Shaft

Crank Link liraeket Screw........................

'I'ension (ui)])er thread) Ueleasinji Shaft

Crank Link Hinge Screw (lower)

.............

Tension (upper thread) Releasing Shaft

Crank Link Hinge Siu'ew (upper)

............

Tension (upper thread) Releasing Shaft

Crank Set Screw

.......................................

'Pension (upper tliread) Releasing Shaft

Crank Sjirlng.............................................

'I’ension (upper thread) Releasing Shaft

Crank S|iring Screw Stud

Tension (upper thread) Screw Stud

.........................

..............

“ “ “ “ “ 50820c

with 51570c...............................................

'I’ension (ujiper thread) S])ring

....................

“ “ “ “ Hushing

(large)........................................................

'Pension (upp(W thread) Spring Hushing

(small).......................................................

'Pension (upper thread) 'Phreail Guide..

“ Releasing .Ann with 51818

.................

“ “ “ ('onnecd ing Rod

Nut,

'Pension Releasing Ann Hinge Screw.. . .

“ “ Rcjller and Screw

Stud

...........................................................

'Pliread (under) Eyelet

“ “ “ Set Screw “ “ Guide

..................................

..................

......................................

“ “■ “ Screw.........................

“ “ Nipper Cam with 01121

and Iwo 105c.............................................

'I’hread (under) .Nipper Cam Oil Had

(fell)

.........................................................

'I’liiead (uiul(u-) Nipper Cam Oil I’ad

11 older......................................................

'I’hread (under) Nipper Cam Oil Had

Holder 128088 with 128087.....................

'I’hread (under) Nipper Cam Set Screw.

“ “ “ Spring (lower). . “ “ “ “ (upi)cr)..

NO. la.ATF. NAME

884n 9118 'Pliread (under) Ni])per Sp i ig Screw. ..

128288 9184 “ “ Hrotector

228n 9184 “ “ “ Screw

128289 9184 “ “ Hull-<.ff

22O1) 9117 “ “ “ Adjusting Screw

.........................

.....................

..........................

01121 9182 “ “ “ Hosition Hin.. ..

128240 9184 “ “ “ Stripper

...............

829i) 9182 “ “ “ “ Screw

128081 9181

Washer

.....................................................

128241 9184 'Pliread (under) Separator

...............................

128212 9184 “ “ 'Pake-up with two 405c. 128248 9185 “ “ “ Frame

128298

------

'Phread (under) Take-u|) Frame complete,

.....................

Nos. 128105, 128248 and 128299...........

*128299 9L15 'Phread (under) 'Pake-up P'raine Cover

with 50150c..............................................

128105 9184 'Phread (under) 'Pake-up Frame Cover

Hinge Hin

................

................................

50150c 9110 'Phread (under) 'Pake-u|i Frame Cover

Hinge Hin Set Screw

...............................

11491) 9184 'Phread (under) 'Puke-up Frame Screw.. 128240 9188 “ " “ Knife 128217 9188 “ “ “ “ Holder

wilh 105c..................................................

185i) 9117 'Phread (under) 'Pake-up Knife Holder

Screw........................................................

105c 918)1 'Phread (under)'Pake-ui> Knife Set Screw

405c 9188 " “ “ Set Screw

................

128218 9188 “ “ “ Stripper 128098 9l:l:> “ “ “ “ HruAiket

1804c 9117

Screw........................................................

88O1) 9118 'Phread (under) 'Pake-up Stripper Screw

128081 9181

Wasdier

....................................................

128249 9188 'Phread (under) 'Pake-u]) 'Phread Guard

wilh 22()u..................................................

128100 9188 'Phread (under) 'Pake-up 'Phread Guard

Hracket.....................................................

1804c 9117 'Phread (under) 'Pake-u)) Thread Guard

Hracket Screw..........................................

1187e oils 'Phread (under) 'Pake-up 'Phread Guard

Hinge Screw

............................................

128101 9188 'Phread (under) 'Pake-up 'Phread Guard

¡^pi'ing......................................................

lS-105 -~2

....

20 I’AR'rS FOR MACHINE No. 148-4

PAR'rS FOR MACHINE No. 148-4

NO. I'LATK NAME

34,'ll) 9118 'I’lircad (uiuler) 'I'uke-up Thread Guard

S|>riug .Screw

..........................................

220u 9117 Tliread (under) 'Гаке-ир 'flircad Guard

.Slop .Screw..............................................

1282,'Ю 913.3 'I'liread (up])er) Controller

..............................

]2,5,')04 9133 “ “ “ Lever with

.30138 E................................................. .

.34879 913.5 ddiiead (upper) Controller Lever Con-

uecl ion

.....................................................

999e 9117 Thread (upper) Controller Lever Cun-

iKH’liou Hinge .Screw (lower)................

999e ill 17 Thread (u])per) Controller Lever Con-

uecliou Hinge .Screw (upper)

..................

1700e 9118 4’hreail (upper) Controller Lever Con-

iH'ction Hinge .Screw (upper) Nut. . . .

12.5,5()0 9133 Thread (upper) Controller Lever Hinge

Stud...........................................................

405c 9133 Thread (u])iier) ('ontroller Lever Hinge

Stud Set .Screw

........................................

125567 9133 'I'hread (u|)per) Controller Lever Rost

with 4(i5c..................................................

443c 9118 4’hread (ui>[)er) Controller Lever Post

.Set .Screw

................................................

.50138k 9133 d'hread (upj.er) Controller .Set Screw. , . 128250 9133 “ “ “ Thread Guide 128251 9130

Po.st with 501381)

......................................

175k 9133 d'hread (upper) (huitroller Thread Guide

I’o.st Screw

..............................................

,501381) 9133 Thread (upper) Controller Thread Guide

Set Screw..................................................

128110 9130 4'hread (upper) Check Spring

...................

128111 iU30 “ “ “ “ Adjusting

Plate........................................................

22Gd 9117 'I’hread (up|)er) Check S|)ring .\dju.sting

Plate Screw...............................................

128112 9101 'rhread (upper) Check S[)i'ing Regulating

Stud...........................................................

447c 9118 'I’hread ( ui)per) Check Spring Regulating

Stud S(‘t .Screw........................................

128252 9130 'I’lu-ead (upper) 'I’ake-up................................

2171)9117 “ “ “ Screw

1282.53 9l3(i “ “ “ Stri|)per

......................

.............

1282.54 9130 “ “ “ “ liracket

14921)9117 Screw

........................................................

220i) 9117 'I’liiead (upper) 'I’ake-up >Strip|)er Screw

NO. PL.ATE NAME

128255 9125 Throat Plate for 128202...........................

128358 9126 “ “ “ 128348

...........................

128376 9125 “ “ “ 128369...........................

128418 9703 “ “ “ P28412...........................

1319k 9118 “ “ Screw........................................

Note: When ordering Nos. 128255, 128358, 12837ti

and 128412, state gauge.

Genuine Singer Needles and their Con

tainers are marked with the Company’s

Trade Mark “SIMANCO.” 1

Needles in Containers marked

“For Singer Machines”

are not Singer made needles. 2

LIST OF PARTS COMPLETE

FOR

MACHINE No. 148-7

FOR THREE LINE STITCHING ON OVERALLS. THREE NEEDLES,

THREE LOOPERS, DOUBLE CHAIN STITCH, GAUGES > „'4 AND INCH BETWEEN EACH NEEDLE. UPPER AND

UNDER FEED, LENGTH OF STITCH UP TO 6 TO THE INCH.

FORMERLY ITBSV 9 MACHINE

.NIU. ri.A'I’l". N.AMIO

*I2S:iS!)

511)1;! 1)1111 " Hack Covi'r 5TD1T

5TD15 1)101 .Ami Hack Cover laitcli xvitli Olln................

5022;ii) 9117 “ " “ “ lliiiiic Screw..

------

Ami............................................................................

...................................................

--------

Ami Hack Cov'cr (•(miplcle, Nus. I0H81),

.lllULkii), 511)i:i, 511)1.5, 511)l() ami hvo

lH:ii).................................................................

9111: 9101 “ “ “ “ S c r e w S t u (1

15:i8i. 9101

Tliuiiib Xiif

....................................................

HARTS TOR M.ACIIINE ,4o. 148-7

NO. l'l..\TE NAME

519U) 9101 Ann Hack Cover Spring..................................

l l llio 9101 “ “ “ “ Screw

51897 1)101 “ Oil Cii|)

...................................................

.....................

128l;i(i 9119 “ Rock Shaft..........................................

128003 9101 “ “ “ Hu.sliiiig (back)

.................

437<J 1)118 “ “ “ “ “ S e t

Screw........................................................

128004 1)101 Arm Rock Shaft Hushing (front)...................

SS8c 9118 " “ Set

Screw........................................................

51911) 9101 .\rni Rock Shaft Hu.'^hing (inlemiediate) .50221c 1)118

Set Screw..................................................

511)21 9101 .Ann Rock Shaft Collar with two loGc. .

15(ic 9101 " “ “ “ SO Screw............

128202 9122 “ “ “ Crank (back) witii two

,50083c, for 128201

.................................

128000 9122 Arm Rock Shaft Crank (back) witli two

50083c, for 128021

..................................

500S3c 1)104 .Ann Rock Shaft Crank (ba'ck) Set Screw

128138 9104 “ “ “ “ (front) with

128145 and two 50135c

..........................

,50135c 1)101 .Arm Rock Shaft Crank (front ) Set Screw 50010 9123 “ Side Cover

280i)9118 '■ " “ Thumbscrew

..............................................

........................

128204 9121 Crank Connecting Rod complete, .\'o.s.

217i), 1722e, 1723e, .54010, 54925,

550;! 1 and 128207....................................

*51925

-----

Crank Connecting Rod (rod only)

..................

,51013c 9122 “ “ “ Hall Screw Stud

1,597e 9118 “ “ “ “ " “

Nut............................................................

07125 9122 Crank ('onnecting Hud Hall Screw Stud

Nut Hock Washer

*51012 ------ Crank tlonnecting Rod ('ap (lower)

....................................

................

890e 9117 “ “ “ “ “ Screw

*128205 “ “ “ “ (up|)er)

..............

171e9117 “ “ “ “ “ Screw

*54014

-------------

“ “ “ End Hearing

(lower)......................................................

128200

------

Crank Connecting Rod lind Hearing

(upper)......................................................

*54010

-------

Crank Connecting Rod Head (lower),

Nos. 54012, 54014 and two 890e

............

*128207 ------ Crank Connecting Rod Head (u))per),

.Nos. 51043c, 128205, 128200 and two

171e

.........................................................

2.S

24 PAR'rS FOR MACmiNE No. 118-7

PAirrS FOR M.kCHINE No. 148-7

.NO. ri..\TB NAME

1722b 9122 (’niiik Coiiiiectiiig Rod Nut (lower). . . .

172:iB 9122 “ “ “ “ (upper)....

rjfiOdl 9101 “ “ “ Fo.sitiou Plate

217u 9117 “ “

Screw

........................................................

*128197

------

Cylinder with 447c, 452c, 400c, 50150c,

54004, 128032, 128033 ami two 391u. .

54020 9101 (.'yliuder Dowel Pill............................................

128011 9124 “ End Cover............................................

128012

--------

Cylinder End Cover complete. Nos.

128011, 128128, two 128013 three

1231w and four 405i>..............................

128127 —— ('yliuder End Cover complete 128012

with 1174w, 30580, 30598 and two

211w...........................................................

128013 9101 Cylinder lind (.’over Lock Siiriiig

...................

405n 9118 “ “ “ “ “ Screw

*54025

-------

“ “ “ Slide (back)

...................

128128 9102 “ “ “ “ “ 54025

w'ith 54027 and 55105..............................

50999b 9117 Cylinder End (.'over Sliile (back) Stop

Screw

*55105

------

Cylinder End Cover Slide (front)

........................................................

.....................

54027 9102 “ “ “ “ “ Hinge

Pill.............................................................

1231\v 9118 Cylinder End Cover Slide (front) Screw

128198 9124 “ Hoidr Shaft

................................

128015 9102 “ “ " Hushing (back)... .

1125c 9118 “ “ “ “ “ Set

Screw

........................................................

128010 9102 Cylinder Rock Shaft Bushing (front).. . .

220n 9117 ■“ “ “ “ “ Set

Scre.w

.......................................................

128017 9102 Cylinder Rock Shaft (.hank with two

1253c

........................................................

1253c 9102 Cylimler Rock Shaft (.¡rank Set Screw. .

128018 9102 “ “ “ (.ioniKiction with

128l'19, 128020 and two each 152b and

175 b.........................................................

128103

*128019

------

Cylinder Rock Shaft Connection 128018

with 128041, 128140 and 128198

------

('3 linder Rock Shaft (ionnection Caj)

(large)

.......................................................

............

152b 9102 Cylinder Rock Shaft Connection Cap

*128020

(large) Screw

------

('yliuder Rock Shaft Connection Cap

............................................

(small).......................................................

NO. 1Ч.АТВ NAME

175b 9102 Cylinder Rock Shaft Connection Cap

(small) Screw

...........................................

12S021 9124 Cylinder Rock Shaft Connecting Rod

complete, Nos. 1722b, 1723b, 128022

128022

128025 and 128026

------

Cylinder Rock Shaft Connecting Rod

(rod only)

.................................................

..............................

,50730c 9102 Cylinder Rock Shaft Connecting Rod

Hall Screw Stud (lower)

..........................

KitilB 9118 Cylinder Rock Shaft Connecting Rod

Hall Screw Stud (lower) Nut

...................

50731c 9102 (Cylinder Rock Shaft Connecting Rod

Hall Screw Stud (upper)

..........................

1597b 9118 Cylinder Rock Shaft Connecting Rod

*128023

Hall Screw Stud (upper) Nut

------

Cylinder Rock Shaft Connecting Rod

(hip (lower)_

............................................

...................

171b 9117 Cylinder Rock Shaft Connecting Rod

((¡ip (lower) Screw...................................

*54(il3

------

Cylinder Rock Shaft Connecting Rod

Ca]i (upper)..............................................

171b 9117 Cylinder Ruck Shaft Connecting Rod

Cap (upiier) Screw

...................................

*128024 ------Cylinder Rock Shaft Connecting Rod

End Heiiring (lower)................................

*55032 -------- (.(yliuder Rock Shaft Connecting Rod

End Hearing (u])|)er)

...............................

125601 ------ ((yliuder Rock Shaft Connecting Rod

End Hearing (upper) 55032 with 54613

128025

and two 171E

------

Cylimler Rock Shaft Connecting<^tod

............................................

Head (lower), Nos. ,50730c, 128023,

128024 iuul two 171b..............................

128026

------ Cylinder Rock Shaft (Jonnecting Rod llead(u|ii)er). Nos. 217u, 50731c, 55034

ami 125601...............................................

1722b 9122 Cylindiu- Rock Shaft Connecting Rod

Nut (low'er)

..............................................

1723b 9122 Cyhnder Ruck Shaft Connecting Rod

Nut (upper)...............................................

55034 9101 Cylimler Rock Shaft Connecting Rod

Position Plate

...........................................

217n 9117 Cylimler Rock Shaft Connecting Rod

I’ositiou Plate Screw................................

128027

------

Cylinder Rock Shaft Eccentric

........................

50589c 9109 “ “ “ “ Regulating

Screw........................................................

2(i PARTS FOR MA('IIINK No. MS-7

PAR'l'S FOR MACHINE No. 118-7

NO. 1‘1..VTK N.^MH

P,)Si) DIO'J ('ylindcr Hork Siiafl lu’ceni rii'Sol Screw

Fill) 111 17 “ Screw

12S1II9 1)122 “ ThreaiN'iycIct

............................................

...............................

12S2(iS -- “ “ “ 12819!)willi()()2i),

1282(10 and 128211

................................

128200 9122 (lylinilcr 'I'lircad I'iyclct 'I’lircad Guard

(i(i2n 9122

Screw

........................................................

1 102i) 9117 <'yliiider Thread livelet Screw

T280:!0 9102 ■' “ Guard

.....................

..............................

l;i02i)9118 “ “ “ Screw....................

1280.il 9121 “ " Tube................................

128082 9121 “ I’op Cover (back)

................................

SlOlil 9109 “ “ “ “ Hinge Pin

.100,; oils

Set Screw

..................................................

1280iii! 9123 (’yliniler To|i Cover (front) witli 233n

anil 1280.31

391n 9118 Cylinder'l'o|> Cover (front) Screw

128031 9109

.................................... Spring

..............................................

...................

...............

2331,9117 “ “ “ “ o Screw

128201 9123 Face Plate

10111 9102 “ “ Pin

.........................................................

.................................................

280n 9118 “ “ 'riinnib Screw................................

f)0732<; 9117 I'eed (lower) Adjusting Screw (eccentric)

173o.i 9118 “ “ “ “ Nut

................

128110 9123 “ “ Connection willi 128039

and I wo 89(ir;

1280:i9

------

80010 9117 “ “ *• Screw...

Feed (lower) Connection Cap..........................

..........................................

128202 9125 “ “ Dog, 10 teeth (8 teeth to

the inch) for ) ^ in., in. and in.

gauges bet ween needle.s..........................

128112 970:i F<;(>d (lower) I)og, 12 ti'clh (8 teelh to the

inch) for in., in. and in. gauges

between needles, fur heavy work

..............

No-no; When ordering Nos. 128202 and 128112,

stale gauge.

50128(; 9117 Feed (lower) Dog Screw

128010

*128171

....

— “ “ Fceentrie

------

“ “ ■“ Body w'ith two

1113c

..................................'.....................

..................................

.....................................

1113c 9109 Feed (lower) Eccentric Body Sc't Screw

128011 9109 Feed (lower) Eccentric (adjustable)

eoniplele, .Nos. 198n, ,50589c, 128027,

128010 and 128171

..................................

NO. l'I..VrK N.VMK

128012 9109 I'ced (lower) Lifting Eccentric with two

ll)2c...........................................................

128122

------

Feed (lower) liifting Eccentric 128012

with 519,53

..............................................

Iti2<; 9118 Feed (lower) Lifting Eccentric Set Screw

128013 9112 “ “ “ Lever.........................

,519,53 9109 “ “ “ “ Connecting

Bod with 51910 and two 89t)n

♦51910

--------- Feed (low-er) Lifting Lever Connecting Rod Cap

...................................................

................

890io 9117 Eeed (lower) Lifting Lever Connecting

Bod Cap Screw

........................................

,50997c 9117 Feed (lower) Lifting Lever tlonnecling

Rod Hinge Screw (eccentric)...................

1722io 9122 Feed (lower) Lifting Lover Connecting

Bod Hinge Screw Nut

..............................

128011 9102 Feed (lower) Lifting Lever Hinge Pin

1,52c 9122

Set Screw..................................................

128015 9109 Feed (lower) Regulator......................................

519,58 9102 “ “ “ Friction Spring

128010 9109 “ “ “ Liiwl with two

153c

..........................................................

128017 9123 Feed (lower) Regulator Pawl Lever with

118c

..........................................................

118c 9110 Feed (lower) Regulator Pawl Lever Set

Screw........................................................

128018 9102 Feed (lower) Regulator Pawl Lover Stiul

12833 9102

Spring

.......................................................

153c 9110 Feed (lower) Regulator PawPlSet Screw

128019 9102 “ “ “ “ Shaft

............

1280,50 9112 “ “ Rod........................................ ^

128051 9102 “ “ “ Connecting Link'

(left)..........................................................

128052 9102 Feed (lower) Rod Connecting Link

(right)

.......................................................

50733c 9U7 Feed (lower) Rod Connecting Link

Hinge Screw-

...........................................

1735J 9118 Feed (lower) Rod Connecting Link

Hinge Screw Nut

.....................................

128053 9122 Feed (lower) Rod Hinge Bracket with

50150c

......................................................

128051 9127 heed (lower) Rod Hinge Bracket Hinge

............................................................

50150c 9110 Feed (lower) Rod Hinge Bracket Hinge

Pin Set Screw

...........................................

28 FOR iMACIlINE No. 118-7

PAR'rS FÜR MACHINE No. 148-7

NO. I'l.ATE NAME

128055 9102 Feed (lower) Rod Hinge Fin

...................

50150c 9110 “ “ “ “ “ Set Screw

128141 9110 “ (ujiper) Bar

.......................................

1281 12 9110 “ “ “ Bell Crank (forked) . .

1407n 9110 “ “ “ “ “ Cap Scj-ew

128110 9110 “ “ “ “ “ Connecting

Link...........................................................

128111 9110 Feed (upper) Bar Bell Crank Connecting

Link Hinge Stud (left)

..............................

152(0: 9118 Feed (upper) Bar Hell Crank Connecting

Link Hinge Stud (left Nut

.........................

128115 9101 Feed (щ)рег) Bar Bell Crank Connecting

Link Hinge Stud (riglit)

............................

125501 9110 Feed (upper) Bar Bell Craidc Slide Block 128140 9110 “ “ “ Hinge Bracket with

two 50150c................................................

50150c 9110 Feed (upper) Bar Hinge Bracket Set

Screw.........................................................

51021c 9117 Feed (upper) Bar Hinge S<:rew

17OO10 9118 “ “ “ “ “ Nut

128148 9104 “ “ Regulator

........................

..............

...........................

125510 9104 “ “ “ Connecting

] ank

..........................................................

51001c 9117 Feed (upper) Regulator Connecting

Link Hinge Screw (back)

.........................

lOSlio 9118 Feed (up|)er) Regulator Connecting Link

Hinge Screw (hack) Nut...........................

907i) 9117 Feed (uj)|)er) Regulator Connecting Link

Hinge Screw (front)..................................

128149 9101 Feed (upper) Regulator Hinge Stud. . . .

50150c 9110 “ “ “ “ “ Set

Screw

........................................................

128150 9123 Fee<l (u|)[)er) Regulator I’itinan

...

128151 9123 “ “ “ “ Connec

tion with 193c...........................................

125514 9101 Feed (up))er) Regulator Pitman Connec

tion Bracket

..............................................

125515 9101 Feed (up|ier) Regulator Pitman Connec

tion Bracket Hinge Pin

.............................

452c 9122 Feed (upper) Regulator Pitman Connec

tion Bracket Hinge Pin Set Screw.. . .

125510 9104 Feed (upper) Regulator Pitman Connec

tion I lingo Pin

..........................................

193i' 9117 Feed (upiier) Regulator Pitman Connec

tion Hinge Pin Set Screw

.........................

128152 9110 Feed (upper) Regulator Pitman Connec

tion Hinge Stml.........................................

NO. 1'1..\TK NAME

L520e 9118 Feed (upper) Regulator Pitman Connec

tion Hinge Stud Nut

.................................

829c 9118 Feed (upper) Regulator Pitman Connec

tion Hinge Screw

.....................................

1520e 9118 Feed (upper) Regulator Pitman Connec

tion Hinge Screw Nut

51005c 9117 Feed (upper) Regulator Screw Stud

..............................

.........

1009c 9118 “ “ “ “ “ Nut

39541 9110 “ “ “ “

Washer

.............

*......................................

128390 9122 Feeding Foot Hinge Stud

004w 9122 “ “ “ “ Stop Screw...

128391

-------------

“ “ Plate.....................................

...............

Note: When ordering No. 128391, state gauge.

128392

------ Feeding Foot Shank

........................................

128393 9120 h'eeding Foot (hinged) complete, Nos.

128391, 128392 and two each OO lw and

128390......................................................

Note: When ordering No. 128393, state gauge.

203d 9117 Feeding Foot Screw

*128334

------

Hand Wheel......................................................

.........................................

128335 9137 “ “ and Pulley, Nos. 128334,

128337 and two 50084c

50084c 9122 Hand Wheel and Pulley Set Screw

...........................

..................

128330 9128 “ “ “ “ Shaft...................

128310

-----

“ “ “ “ “ 128330

with 54616. .............................................

128404 -------- Hand Wheel and Pulley Shaft 128340

with 128045, 128122 and 1284«3

...........

51908 9112 Hand Wheel and Pulley Shaft Bushing

(light )

.................................

....................

41128 9127 Hand Wheel and Pulley Shaft Bushing

(right) Oil Pud (braided cotton)

888c 9118 Hand Wheel and Pulley Shaft Bushing

...............

(right) Set Screw......................................

128388 9127 Hand Wheel and Pulley Shaft Flanged

Bushing (left)

...........................................

42305 9127 Hand Wheel and Pulley Shaft Flanged

Bushing (left) (,)il Pad (braided cotton)

445c 9122 Hand Wheel and Pulley Shaft Flanged

Bushing (left) Set Screw

..........................

150i) 9127 Hand Wheel and Pulley Shaft Screw....

54970 9101 “ “ “ “ “ Washer..

128158 9130 Lifting Presser Bar (lower)

.............................

128159 9130 “ “ “ “ Bushing....

:il) PAinVS FOR MA(;iIINF No. MS-7

NO. Р1.ЛТ1С NAMli

5(lSc 'JM8 l.iftiiifi; [’ге.ч.чег liar ,(loui!i) Husliiiig'Set

Screw

........................................................

I'iSKiO iJFiO Lil'tiiit; I'nsser liar (lower) (liiiile lirack-

et with M54ic............................................

M.alF, <J127 Lifliiij' l’re,s.s(!r liar (lower) Guide lirack-

td, ('laiiijtiiig Screw

..................................

I'iSltil 1)M(> Liftiiifi Pre.s.ser liar (lower) Guide lirack-

(d (¡aide.....................................................

171i) 1)117 laftiiijj; Pre.s.ser liar (lower) Guide liraek'-

et Goiide Screw

I'dSOtio D12S Lil'tiii}' Presser liar (upper)

........................................

......................

12SUIL l)l:il) “ “ “ “ Guide liraek-

et with hide

...............................................

■1 lOo DlUl Fiftiiie Priss.ser liar (u|)per) Guiileliiack-

I'iSOiiS Ohio biftiiia I’re.sser liar Fifler

el, Sc-I Sci'ew

...........................................

............................

I'dSOhl) У1Ж) “ “ “ “ Gonmu;ting

Link...........................................................

oOlltiF 1)117 J.ifter Pre.s.ser liar Lifter ('oiima.'t ilia

Link 1 liiifre Screw (lower)

.....................

lose 9117 Lifter Pre.s.ser liar Lifter ('oiinectiiiii

Link Hinge Screw (upper)........................

5l)lloc 1)117 Lifter Presser liar Lifter Hinge Sere«.. .

22ti9 DLiO ■* “ “ “ S t о ]) P i 11

(lower)

......................................................

21)19 DLiO Lifter Presser liar Lifter Stop Pin (upper)

......................................................

12S070 9128 Lifter Presser liar Lifting Lever.......................

128071 9112 “

....................... '■ Lxteii-

sion............................................................

llile 9117 Litter Presser liar Lifting Lever Exten

sion Screw.................................................

Stilin 9117 Litter Presser liar Lifting Lever Hinge

Screw

........................................................

50G0tii) DLiO Lifter Presser liar Lifting Lever Stop

Sere«

.........................................................

128180 9128 Lifter Pre.s.ser liar S|)ring (tlat).......................

51722 DLiO “ “ “ '■ Stud 128882 9122 “ “ Foot Hinge Pin 128891

-------

“ “ “ Plate

.......................

............................

.................................

Xotf: When ordering No. 128894, st;ite gauge.

128881 ------ Lifter Pressei’ h'oot Shank

...............................

128890 9120 Lifting Presser Fool thinged) complete,

Nos. 128882, 128881 and 128891

...........

Note; When ordering No. 128890, state gauge.

I’ARTS FOR MAGHINE No. 148-7

NO. l’l..vri': NA.ME

19t)i) 9117 Lifting Presser Foot Screw

.............................

128118 9127 Looper (hack)..............................................

128111 9127 “ (centre)............................................

128115 9127 “ (front)..............................................

128819 9127 “ C:urier with 1154c, for 128413. . 128897 9127 “ “ “ 785c, for 128414.. . 128898 Jjooper Carrier (adjustable), Nos. 128349

and 128897

...............................................

128208 9127 Looper Ciirrier (single with 1454c, for

128415......................................................

1151c 9127 Looper ('arrier Clamping Screw

......................

785c 9127 “ “ Set Screw 128899 9128 Needle liar (liollow) 128100

--------

Needle liar complete. Nos. 128215 and

........................................

128899......................................................

51971 9129 Needle Bar Rushing (lower)

...................

508c 9118 “ “ “ “ Set Screw..

51710 9129 “ “ “ (upper)

...................

508c 9118 “ “ “ “ SetScrew.. *51711 9129 “ “ Connecting Link 128271

___

“ “ “ “ 54711 with

54712 and 128210

....................................

..................

51712 9129 Needle liar Connecting Link Hinge Stud

1.520.1 9118

Nut............................................................

128117 9129 Needle liar (.'onnecting Stud with 207e.

207r; 9129 “ “ “ “ Clamping

Screw........................................................

128210

------

Needle liar Connecting Stud complete.

Nos. 220i), 10107, 128117, 128211,

128218, 128214 and two each 423¡J8

and 128212

...............................................

128211 9129 Needle liar 'hliread Retainer Bracket

with two 288i)

..........................................

220i)9ll7 Needle liar d'hread Retainer Bracket

Screw........................................................

42818 9129 Needle B:ir Thread Retainer Disc

128212 9129 “ “ “ “ Separating

Disc

..........................................................

10107 9129 Needle liar Thread Retainer Spring. .. .

128218 9129 “ “ “ “ Stud

.........

2881)9129 “ “ “ “ “ Set

Screw........................................................

128214 9129 Needle liar 'I'hread Retainer Thread

Guide

........................................................

288i) 9129 Needle Bar Thread Retainer Thread

Guide Set Screw.......................................

..........

RAR'PS TOR MACHINP; No. 118-7

PARTS TOR MACHINE No. 148-7

NO.

128215

PLATK

9129

Needle Clamp with three 1198f

NAME

.Note; When onhiring No. 128215, state gauge.

128210

9129

Needle Guard for ) ^ in., in. and i-, in.

gauges

.......................................................

Note: When ordering No. 128210, state gauge.

447c 9118

1498e

50182W

1548w 9118

*128887

128220 128209

Needle Guard Set Screw...............................

9129 9118

“ Set Screw

..............................................

Pressure Regulating lluiml) Screw

“ “ “ “ Lock

— 9128

Nut.........................................................

Pulley, 2ps in. diaui., 'Pension (under thread) Bracket

“ “ “ “ 128220, with 283d, IPPli), .500761), ti8824, 128077, 128221, 128222 and two 387u

170d 9117

2102

51570c 9181

128221

288 D

'Pension (under thread) Bracket Screw..

9181

“ “ “ Disc.................................................

“ “ “ Regulating

9181

'Phuinb Nut

'Pension (under thread) Releaser (lower)

...........................................

9117

Adjusting Screw'.......................................

500701)

128222

82572

128077

08824

9117

9181

887i) 9181

9181 9128 9181

Tension (under thread) Relea.ser (lower)

Hinge Screw

'Pension (under thread) Relea.ser (upper)

ii ii i( U

Screw

.............................................

........................................

'Pension (under threiid) Releasing Disc..

“ “ “ “ Lever

Spring........................................................

11 111)

9117

'Pension (under thread) Releasing Lever

Spring Screw'....................................

12,8078

50820c 59589

9181

Tension (under tlireiid) Releasing Pin. .

9181

----

“ “ “ Screw' Stud

50820c with 51570c

,59584

59587 9181

9181

'Pension (under thread) Spring

“ “ “ “ Bushing

(large).......................................................

59588 9181

17,517 9181

12,8228

'Pension (und)'r thread) Spring Bushing

(sin)ill)

..............................................

'Pension (under thread) 'Phread Guide.. .

9185

“ (up|>er thread) Bracket with

three 117c..........................................

...................

...............

....................................

...................

U i( ii

.................

.....................

NO. I’l.ATE N.\ME

9118 'reiision (upper tliread) Bracket Screw

I'JS'.l'il 9181 “ “ “ “ Thread

Ey elol (double)........................................

9118 Teunion (uppiu- thread) Bracket Thread

Eyelet Screw

............................................

P28081 9181 Tension (u])per thread) Bracket Thread

Eyelet Screw Washer

2102 9181 Tension (u|)))er thread) Disc

...............................

.............

515701; 9181 “ “ “ Regulating

Thmnl) Nut...............................................

82.572 9181 'rension (upper thread) Releasing Disc.. 128225 9181 “ “ “ “ Pin... 128220 9185 “ “ “ “ Shaft 128227 9181

Collar with two 735c................................

785c 9181 'Pension (u|)j)cr thread) Releasing Shaft

Collar Set Screw

......................................

128228 9182 'Pension (upper thread) Releasing Shaft

Crank with 457c

.......................................

51878 9182 'Pension (upper thread) Releasing Shaft

Crank J/ink

...............................................

128229 9182 'Pension (upper thread) Releasing Shaft

Crank Link Bracket

..................................

880i) 9118 'Pen.sion (ujiper thread) Releasing Shaft

Crank Link Bracket Screw.......................

51084c 9181 'Pension (upijer thread) Releasing Shaft

Crank Link Hinge Screw (lower)

............

110c 9117 'Pension (upper thread) Relea.sing Shaft

Crank Link Hinge Screw (upper)

............

457c 9182 'Pension (upper thread) Releasing Shaft

Crank Set Screw................................

89802 9182 'Peinsion (upper thread) Releasing Shaft

Crank Spring

............................................

170n 9181 'Pension (u])per thread) Keleasing Shaft

Crunk Spring Screw Stud

........................

50820c 9181 'Pension (upper thread) Screw Stud 59,589

-------

59580 9181 Tension (upper thread) Spring

50820c with 51570c

.................................

........................

59587 9181 “ “ “ “ Bushing

(lai-ge)......................................................

59588 9181 'Pfmsion (upper thread) Si>ring Bushing

(small)

......................................................

17517 9181 'Pension (upper thread) 'Phread Guide. .

128088 9185 “ Releasing Arm with 51818

..........

12MIS1 9185 “ “ “ Connecting Rod

+ 35 hidden pages