Simrad PI50 Installation manual

Installation manual

TECHNOLOGY FOR SUSTAINABLE FISHERIES

www.simrad.com

Simrad PI50 Catch monitoring system

SimradPI50

Catchmonitoringsystem

Installationmanual

Thismanualprovidesyouwiththebasicinformation requiredtoinstalltheSimradPI50.Formoredetailed informationaboutthepracticaluseoftheproduct,refer totheSimradPI50OperatormanualortheSimradPI50 Referencemanual.

KongsbergMaritimeAS

328459/A

Documenthistory

Document:328459/ISBN:978-82-8066-122-7/Rev.A

Rev.A28.04.2010

©2010KongsbergMaritimeAS TheinformationcontainedinthisdocumentremainsthesolepropertyofKongsbergMaritimeAS.Nopart ofthisdocumentmaybecopiedorreproducedinanyformorbyanymeans,andtheinformationcontained withinitisnottobecommunicatedtoathirdparty,withoutthepriorwrittenconsentofKongsberg MaritimeAS.Thedocument,oranypartofit,maynotbetranslatedtoanyotherlanguagewithoutthe writtenapprovalfromKongsbergMaritimeAS.

Firstrelease.

Disclaimer

KongsbergMaritimeASendeavourstoensurethatallinformationinthisdocumentiscorrectandfairly stated,butdoesnotacceptliabilityforanyerrorsoromissions.

Warning

Theequipmenttowhichthismanualappliesmustonlybeusedforthepurposeforwhichit wasdesigned.Improperuseormaintenancemaycausedamagetotheequipmentand/orinjury topersonnel.Theusermustbefamiliarwiththecontentsoftheappropriatemanualsbefore attemptingtoinstall,operateorworkontheequipment. KongsbergMaritimeASdisclaimsanyresponsibilityfordamageorinjurycausedbyimproper installation,useormaintenanceoftheequipment.

Supportinformation

Ifyourequiremaintenanceorrepair,contactyourlocaldealer.Y oucanalsocontactususingthefollowing address:-.Ifyouneedinformationaboutourotherproducts,visitourwebsite.Onthewebsiteyou willalsondalistofourdealersanddistributors.

KongsbergMaritimeAS

www.kongsberg.com

Installationmanual

Aboutthismanual

Purpose

Thepurposeofthismanualistoprovidetheinformationandbasicdrawingsrequiredfor installationoftheSimradPI50.

Formoredetailedinformationaboutthepracticaluseoftheproduct,refertotheSimrad PI50OperatormanualortheSimradPI50Referencemanual.

Aboutthetechnicaldescriptionsandthetargetaudience

ThismanualdescribestheinstallationoftheSimradPI50.

Themanualisintendedfortechnicalpersonnel;qualiedmaintenanceengineersand technicians.Itisassumedthatthepersonnelisconversantwiththegeneralprinciplesof maritimeelectronicequipment,inparticularsonar,echosounderandcatchmonitoring systems.Thepersonnelmustalsobefamiliarwithcomputerhardware,signalprocessing, interfacetechnologyandtraditionaltroubleshootingonelectronicandmechanical products.

Theinstructionsmustbefollowedcarefullytoensureoptimalperformance.Asaguide, installationproceduresarepresentedintheordertheyaretobeperformed.Successful completionofeachprocedureistobeconrmedbycheckingoffthecorrespondingbox.

Note

Theinstallationinstructionsgiveninthisdocumentmustbeadheredto.Failuretodoso mayrendertheguaranteevoid.

KongsbergMaritimeASwillacceptnoresponsibilityforanydamageorinjurytothe system,vesselorpersonnelcausedbyequipmentthathasbeenincorrectlyinstalledor maintained,orbydrawings,instructionsorproceduresthathavenotbeenpreparedbyus.

Theequipmentdescribedinthismanualincludesthecompletesystemwithassociated cabinets,butnotsystemunitsprovidedlocallybythecustomer,installationshipyard orlocaldealer.Themanualalsodenestheequipmentresponsibility,andprovides instructionsforunpackingandstorage.

Afterinstallation,thisdocumentmustbestoredonboardthevesselforlaterreference whenupdatingorservicingtheequipment.

328459/A

SimradPI50

Installationdrawings

Detailedvesselspecicmechanicaldrawingsfortheinstallationmustbeprovidedbythe customer,oranyshipyardcontractedtoperformtheinstallation.

KongsbergMaritimeASmay,onspecialorder,provideassistancetothesedrawings. Drawingsmustbeapprovedbytheappropriatevesselcerticationauthoritypriorto installationofthesystem.

ApplicableoutlinedimensionandproductionsdrawingsareprovidedintheDrawing lechapter.DrawingsmayalsobedownloadedinPDFand/orDWGformatsfrom

t t p : / / w w w . s i m r a d . c o m .

References

ThefollowingusermanualshavebeenprovidedfortheSimradPI50.Englishmanuals areprovidedwiththePI50whenitisshipped.Whenavailable,manualsinother languagesmaybedownloadedfromh

t t p : / / w w w . s i m r a d . c o m .

•SimradPI50OperatorManual,English[328457/ISBN978-82-8066-121-2]

•SimradPI50ReferenceManual,English[328458/ISBN978-82-8066-120-3]

•SimradPI50InstallationManual,English[328459/ISBN978-82-8066-122-7]

328459/A

AbouttheSimradPI50

StudythischaptertofamiliarizeyourselfwiththeSimradPI50.

Topics

•Importantonpage9

•Systemdescriptiononpage10

AbouttheSimradPI50

•Systemdiagramonpage11

•Systemunitsonpage12

•Generalsupplyconditionsonpage15

•Generalinstallationrequirementsonpage16

Important

Aswithallotheradvancedinstruments,thereareafewimportantthingsthatyoumustbe awareof.

WhenthePI50isnotused

WhenyoudonotusethePI50,switchoffthedisplayandthecomputer.

YoumayswitchofthePI50SensorReceivertoo.Itisnotequippedwithanon/offswitch, butyoucanunplugthepowersupplyifyouarenotgoingtousethePI50forawhile.

Ifsomethingbreaksdown

Ifyoubelievethatsomethinghasbrokendown,contactyourlocaldealer.Hewillbe abletoassist.

Alistofallourdealersisprovidedonh contactadealer,observethesupportinformationinthischapter.

→Supportinformationonpage18

WhenyouswitchoffthePI50

YoumustNEVERswitchoffthePI50bymeansoftheon/offswitchonthecomputer.

YoumustALWAYSexitthePI50applicationbyclickingtheExitbuttonontheTitleBar.

328459/A

t t p : / / w w w . s i m r a d . c o m .Ifyouareunableto

SimradPI50

IfyoupowerdownthePI50bymeansofthecomputerswitchyoumaydamagethe softwareapplicationandtheinterfaceparameterstoexternaldevices.

Systemdescription

TheSimradPI50isdesignedfortheprofessionalsherycommunityimplementingthe latestinnovations.Thecatchmonitoringsystemallowsyoutostayinfullcontrolofthe gearanditsbehaviour.Thesystemisdesignedtobeequallyusefulforallshingtypes. Bottomtrawlers,pelagictrawlers,purseordanishseiners-whateverkindofgearyou use,allvesselscantakeadvantageofthefunctionalityprovidedbythePI50.

TheSimradPI50comprisesthefollowingunits:

•Colourdisplay

•ProcessorUnit(ThePI50MarineComputermaybeprovided)

•SensorReceiver

•Hydrophone

Thehydrophoneismountedunderthevessel’shull.

Thesystemfurthercomprisesanumberofsmallandrobustsensorsmeasuringthe conditionsonyourshinggear.TheSimradPI50canreceiveinformationfromsix sensorssimultaneously.

Oneormoresensorbatterychargersarealsorequired.

Thesensorsarepoweredbybuilt-inrechargeablebatteries.Theyarehousedintitanium casings,anddesignedusingadvancedshockabsorbingmaterials.Theinformation collectedbythesensorsaresentthroughthewatertothehydrophonebymeansofcoded soundwaves.TheSensorReceiverampliesanddecodestheinformation,convertsitto digitalformat,andsendsittotheProcessorUnit(computer).Thecomputerinterpretsthe information,andnallypresentsittoyou.

328459/A

Systemdiagram

AbouttheSimradPI50

Figure1System diagram

Abasicsystemdiagramisprovided.Interfacecapabilities andpowercablesarenotshown.

ADisplayUnit

BProcessorUnit

CSensorReceiver

DPowerSupply

EHydrophone

FCatchMonitoringSensors

Additionalunitsinclude:

•SensorBatteryCharger

•Loudspeaker

Aloudspeakerisoptional,anditmustbeinstalledifyou wishtoheartheaudiblealarms.Notethataloudspeaker cannotbeconnecteddirectlytothecomputer.An amplierisrequired.

328459/A

SimradPI50

Systemunits

Eachsystemunitisdescribedinmoredetail.

Colourdisplay

AnycommercialcolourdisplaycanbeusedwiththeSimradPI50systemprovidedthat thedisplaymeetsthebasicspecications.

Thesespecicationsare:

•Minimumscreenresolution:1280x1024

ProcessorUnit

AdedicatedmaritimecomputermaybeprovidedwiththeSimradPI50system.

Figure2PI50MarineComputer

Whenthiscomputerissupplied,itisreadilysetupwithallnecessarysoftware.The computeriscustomizedbySimradtocontainnomovingparts.

Thecomputerisnormallymountedinthewheelhouse.Ifyouwishtotakeadvantage oftheaudiblealarmsoffered,thecomputermustbeinstalledinsuchmannerthatthe built-inloudspeakercanbeheard.Asanalternative,anexternalpoweredloudspeaker canbeconnected.

Note

ThePI50MarineComputerdoesnotcontainanyfans.Itwillbeverywarm,evenduring normaloperation.

AnycommercialcomputercanalsobeusedwiththeSimradsystemprovidedthatthe computermeetsthebasicminimumspecications.

Minimumcomputerrequirements

Observethefollowingminimumcomputerrequirements.

•Operatingsystem:Microsoft

7(32–bit)

[1]

Onnewinstallations,werecommendthatMicrosoft

Windows

(32–bit)orMicrosoft

Windows

7isused.

•Processorspeed:2GHzDualcore

1.ThePI50softwaredoesnotsupportMicrosoft©Windows©NTorolderoperatingsystems.

328459/A

AbouttheSimradPI50

•Memory:2Gb

•Freeharddiskspace:30Gb

•Chipset:Intel

•Graphicadapter:DirectX9.0ccompatiblewithDirect3dandOpenGL

•Interfaces:

–Oneserial(RS-232)interfacetocommunicatewiththeReceiverUnit

Notethat“PCIExpress”serialinterfaceboardsarenotsupported.

–OneEthernetinterfacetocommunicatewithship’slocalareanetwork(ifrequired)

–Oneormoreseriallineinterfaces(dependsonhowmanyinterfacesthatare

requiredforthespecicintegration)

Note

USBtoSerialadapterarenotsupportedunderWindowsXP .

[2]

•Displayresolution:1280x1024

[3]

SensorReceiver

TheSimradPI50usesacustombuiltreceiver.

Figure3PI50Receiver

ThePI50SensorReceiverishousedinasmallcabinet.Allnecessaryinputandoutput socketseasilyavailable.Theunitispoweredbyasmallexternalpowersupply.

TheSensorReceiverprovidesthefollowinginterfaces:

•SeriallinecabletotheProcessorUnit.

•Onehydrophone

•Externalpowersupply

ThemaximumlengthoftheseriallinecablebetweentheSensorReceiverandthe ProcessorUnitis50meters.

2.Alargenumberofcommercialgraphicadaptersareavailable,andSimradhasnottestedallofthem.

EvenadaptersmeetingtheminimumspecicationsmayinsomecasesprovetofailwiththePI50 software.W ewelcomeanyfeedbackwithcommentsorexperienceswithgraphicadapters.

3.Thisistheminimumresolution.AswithallotherWindowsapplications,thePI50softwarewillwork

withhigherresolutions,providedthatitissupportedbythegraphicadapterinthecomputerandthe displayconnected.

328459/A

SimradPI50

Hydrophone

Twohullmountedhydrophonesareavailable,oneforpurseseiningoperations,andone fortrawloperations.Y oucaninstallboth,andthenselectactivehydrophonebymeansof aselectorboxonthebulkhead.

Purseseinehydrophone

Figure4Purseseinehydrophone

Thehullmountedhydrophoneforpurseseining operationshasa90degreeshorizontalbeam anda30degreesverticalbeamtoprovidethe PI50withoptimalreceptionfromthesensors onapurseseine.

Thisspecicbeampatternisespeciallysuitedfor purseseiningandthewidecoverageareareduces theneedforcarefulalignment.

Trawlhydrophone

Thehullmountedhydrophonefortrawlingoperationshasa50degreeshorizontalbeam anda30degreesverticalbeamtoprovidethePI50withoptimalreceptionfromthe sensorsonabottomorpelagictrawl.

Thisspecicbeampatternisespeciallysuitedfortrawlingandthewidecoveragearea reducestheneedforcarefulalignment.

Portablehydrophone

Figure5Portablehydrophone

Aportablehydrophoneisalsoavailable.Itis designedasatemporarymeasureuntilaxed hydrophonecanbeinstalledatthevessel’snext planneddrydocking.Ithasanomnidirectional beamanda50meterintegratedcable.

Thecableissheathedinpolyurethaneproviding robustexternalprotectiontocomplimentits150 kgtensilestrength.

Thecableissuppliedonareelforconvenient retrievalandstowage,andisequippedwitha plugforeasyattachmenttotheReceiverUnit.

328459/A

Catchmonitoringsensors

AlargeselectionofsensorscanbeusedwiththePI50system.

Thecurrentsoftwareversionsupportsthefollowingsensors:

•BottomContact

•Catch

•Depth

•Spread

•Temperature

•Height

•Spread/Depth

•TwinSpread

•Height/Depth

•SeineSounder

AbouttheSimradPI50

•Geometry

Relatedtopics

•Sensorsoverviewonpage68

•Sensorcongurationonpage83

•Chargingproceduresonpage86

Generalsupplyconditions

ThefollowingsupplyconditionsareapplicabletothisSimradPI50delivery.

Equipmentresponsibility

Theshipyardperformingtheinstallationand/orequipmentdealerbecomesfully responsiblefortheequipmentuponreceiptunlessotherwisestatedinthecontract.The durationofresponsibilityincludes:

•Theperiodoftimetheequipmentisstoredlocallybeforeinstallation.

•Duringtheentireinstallationprocess.

•Whilecommissioningtheequipment.

•Theperiodoftimebetweencommissioningandthenalacceptanceoftheequipment

bytheenduser(normallytheownerofthevesselwhichtheequipmenthasbeen installed).

Unlessotherarrangementshavebeenmadeinthecontract,theSimradPI50guarantee period(asspeciedinthecontract)beginswhentheacceptancedocumentshavebeen signed

328459/A

SimradPI50

Receipt,unpackingandstorage

Uponacceptingshipmentoftheequipment,theshipyardand/orthedealershouldensure thatthedeliveryiscompleteandinspecteachshippingcontainerforevidenceofphysical damage.Ifthisinspectionrevealsanyindicationofcrushing,dropping,immersionin wateroranyotherformofdamage,therecipientshouldrequestthatarepresentative fromthecompanyusedtotransporttheequipmentbepresentduringunpacking.

Allequipmentshouldbeinspectedforphysicaldamage,i.e.brokencontrolsand indicators,dents,scratchesetc.duringunpacking.Ifanydamagetotheequipmentis discovered,therecipientshouldnotifyboththetransportationcompanyandKongsberg MaritimesothatKongsbergMaritimecanarrangeforreplacementorrepairofthe damagedequipment.

Onceunpacked,theequipmentmustbestoredinacontrolledenvironmentwithan atmospherefreeofcorrosiveagents,excessivehumidityortemperatureextremes.The equipmentmustbecoveredtoprotectitfromdustandotherformsofcontamination whenstored.

Formoreinformation,seetheappendixrelatedtoequipmenthandling.

Generalinstallationrequirements

ThefollowinginstallationrequirementsareapplicabletothisKongsbergMaritime delivery.

Approvalbyclassicationsociety

TheSimradPI50hydrophoneinstallationmustbeapprovedbyDetNorskeV eritas (DNV)oranotherclassicationsociety.Theshipownerandshipyardperformingthe installationareresponsibleforobtaininginstallationapproval.

Supplypower

Thesupplyvoltagetotheequipmentistobekeptwithin±10%oftheinstallation’s nominalvoltage.Maximumtransientvoltagevariationsonthemainswitchboard’s bus-barsarenottoexceed-15%to+20%ofthenominalvoltage(exceptunderfault conditions).

Compassdeviation

Oncetheinstallationiscomplete,thevesselmustbeswungwiththesysteminboth theoperativeandinoperativemodes.Theshipownerandcaptainareresponsiblefor updatingthedeviationtableaccordinglywithregardtothevessel’snationalregistryand correspondingmaritimeauthority.

328459/A

AbouttheSimradPI50

Noisesources

Thevessel’shull,rudder(s)andpropeller(s)shouldbethoroughlyinspectedindrydock priortoinstallation.Roughnessbelowthewater-linedeformitiesintheshellplatingand protrudingobstaclescancreateunderwaternoise.Thesesourcesofturbulencemustbe smoothedorremovedasbestaspossible.Itisespeciallyimportantthatthepropeller(s) isnotpittedordamaged.

Drydocking

Makesurethatampleclearanceunderthesonartrunkand/orprotectionblisteris providedwhendrydockingthevessel.Avoidlocatingsupportingblocksorstructuresin thevicinityofthisequipment.

Note

Thelocationofthehydrophoneand/orprotectionblistermustbenotedonthevessel’ s dockingplanforfuturereference.

Powerdownallhydroacousticsystems,andlabeleachsystemaccordinglytoprevent accidentalpoweron.Removecircuitbreakersifnecessary .

Wiring

Allcablesrunningbetweensystemcabinetslocatedindifferentroomsand/orondifferent decksmustbesupportedandprotectedalongtheirentirelengthsusingconduitsand/or cabletrays.Notethatthecablesmustnotbeinstalledinthevicinityofhigh-power suppliesandcables,antennacablesorotherpossiblesourcesofinterference.

Note

Wheneverpossible,hydrophonecablesmustberuninsteelconduits.

Formoredetailedinformationaboutcablesandwiring,refertothebasiccable requirements.

→Basiccablerequirementsonpage116

328459/A

SimradPI50

Supportinformation

IfyouneedadditionaltechnicalsupportforyourSimradPI50youmustcontactyour localdealer,oroneofoursupportdepartments.

Norway(Mainofce)

•Address:Strandpromenaden50,3190Horten,Norway

•Telephone:+4733034000

•Telefax:+4733042987

•E-mailaddress:s

•Website:h t t p : / / w w w . s i m r a d . n o

Spain

•Address:PoligonoPartidaTorres38,03570Villajoyosa,Spain

•Telephone:+34966810149

•Telefax:+34966852304

•E-mailaddress:s

•Website:h t t p : / / w w w . s i m r a d . e s

USA

•Address:1921033rdAveW,Lynnwood,W A98036,USA

•Telephone:+14257121136

•Telefax:+14257121193

•E-mailaddress:s

•Website:h t t p : / / w w w . s i m r a d . c o m

i m r a d . s u p p o r t @ s i m r a d . c o m

i m r a d . s p a i n @ s i m r a d . c o m

i m r a d . u s a @ s i m r a d . c o m

328459/A

Installationprocedures

ThischapterprovidesthebasicinformationrequiredtoinstallthephysicalSimradPI50 units.

Note

Physicalinstallationofcommercialunits(computers,printers,displays)isn o t described inthismanual.Refertotheapplicableusermanual(s)providedwiththeproduct.

Topics

•Basicprocedureonpage20

•PI50MarineComputerinstallationonpage20

•Colourdisplayinstallationonpage22

•ReceiverUnitinstallationonpage22

Relatedtopics

•Generalsafetyrulesonpage105

•Equipmenthandlingonpage106

•Basiccablerequirementsonpage116

328459/A

SimradPI50

Basicprocedure

Thisisthebasicinstallationprocedure.

1Checkthatyouhavereceivedallpartsrequiredfortheinstallation;cables,

connectors,brackets,drawingsetc.

→Drawingleonpage59

2Installthehydrophoneanditscableaccordingtotheguidelinesinthehydrophone

manualandthedrawingsprovidedwithit.

3MountthePI50ProcessorUnit(orcommercialcomputer).

→PI50MarineComputerinstallationonpage20

4Mountthedisplayunit.

5Connectthecomputeranddisplaycables.

•Powercabletodisplaymonitor.

•Powercabletocomputer.

•Videocablefromcomputertodisplaymonitor.

•Connectthepointingdevice(mouseortrackball).

•Connectthekeyboard(ifapplicable).

→PI50Cablelayoutonpage24

6MounttheReceiverUnitusingtheappropriatebrackets.

→ReceiverUnitinstallationonpage22

7MountthepowersupplyfortheReceiverUnit.

8ConnectthecablestotheReceiverUnit:

•Hydrophonecable

•Powercables

9PrepareandinstalltheseriallinecablebetweentheReceiverUnitandthecomputer:

10Prepareandconnecttherequiredsensorinterfaces.

•Navigationsystem(GPS)forspeed,position,distanceandheadinginformation

•Trawlsystemforgearmonitoring

•Echosounderfordepthmonitoring

YoucanconnectthesedevicesusingseriallinestotherearsideofthePI50 computer.Ifapplicable,youcanalsoretrievetheinformationfromtheseperipheral devicesfromthevessel’slocalareanetwork(LAN).

PI50MarineComputerinstallation

ThePI50MarineComputerisanindustrialcomputer.Itissmall,rugged,andcontainsno movingparts.Thismeansthatfans,harddisksandCDdrivesareomitted.Thecomputer providesEthernetsockets,RS-232seriallines,andanumberofUSBconnectors.The harddiskisreplacedwithasolidstatedrive(SSD).

328459/A

Installationprocedures

TheMarineComputeriseasilymountedwiththebracketssuppliedwiththeunit.

Asmallexternalpowersupplyisprovided,andmustbeplacednearthecomputer.

Figure6PI50MarineComputer

Preparations

Twobracketsandeightboltsenclosed.Mountthetwobracketsatthebottomofthe computer.

Procedure

Tomakesurethattheprocedureisfollowedcorrectly,andintherightorder,tickoff eachtaskafteryouhavedoneit.

Locatethemostconvenientlocationforthecomputer.

Inordertoallowforfuturemaintenance,westronglyadvicethatyoumountthe computerwithitsrearpanelavailableforimmediateaccess.

Note

Makesurethatyoucanaccessboththerearandfrontsideofthecomputerafterit hasbeeninstalled.

2 Observetheoutlinedimensiondrawing.

Markthelocationofthesixholesprovidedonthetwobrackets.

Mounttheunitusingsixboltsorscrews.

Findasuitablelocationforthepowersupply.

Securethepowersupplywithwirestraps,velcro,brackets,oranyother

meansappropriate.

Connectthecables.

Note

Whenyouconnectthecables,makesurethattheyareallsecured,andableto withstandthevibrationandmovementsofthevessel.

328459/A

SimradPI50

Colourdisplayinstallation

Differentcommercialcolourdisplaysareavailable.Forinstallationandoperationofthe chosendisplayunit,refertothemanualsuppliedwiththeunit.

Tomakesurethattheprocedureisfollowedcorrectly,andintherightorder,tickoff eachtaskafteryouhavedoneit.

Beforeyoustartinstallation,checkthatallthefollowingrequirementsaremet.

•Thedisplaymustbelocatedsothatitisbestprotectedfromglarewhichreduces readability.

•Thedisplaymaybemountedinapanel,onthedesktoporbulkhead,oroverhead.

•Makesurethatadequateventilationisavailabletoavoidoverheating.

•Thecompasssafedistancemustbeallowedforwhenplanningtheunit’slocation.

•Makesurethattheinstallationallowsforthephysicalmovementsandforces normallyexperiencedonavessel.

•Makesurethatenoughspaceisprovidedformaintenancework.

Installthecolourdisplayasdescribedtheapplicabledocumentationprovided

withtheunit.

Connectthecables.

Note

Whenyouconnectthecables,makesurethattheyareallsecured,andableto withstandthevibrationandmovementsofthevessel.

ReceiverUnitinstallation

ThePI50SensorReceiverishousedinasmallcabinet.Allnecessaryinputandoutput socketseasilyavailable.Theunitispoweredbyasmallexternalpowersupply.

TheSensorReceiverprovidesthefollowinginterfaces:

•SeriallinecabletotheProcessorUnit.

•Onehydrophone

•Externalpowersupply

Figure7PI50Receiver

328459/A

Installationprocedures

Preparations

TwobracketsaremountedontheReceiverUnittofacilitateinstallationonabulkheador insideacabinetwall.Y ouneedtondfour4mmboltsorscrews.

Procedure

Tomakesurethattheprocedureisfollowedcorrectly,andintherightorder,tickoff eachtaskafteryouhavedoneit.

LocatethemostconvenientlocationfortheReceiverUnit.

Inordertoallowforfuturemaintenance,westronglyadvicethatyoumounttheunit withbothendpanelsavailableforimmediateaccess.

Observetheoutlinedimensiondrawing.

Markthelocationofthefourholesprovidedbythetwobrackets.

Mounttheunitusingfourboltsorscrews.

Findasuitablelocationforthepowersupply.

Securethepowersupplywithwirestraps,velcro,brackets,oranyother

meansappropriate.

Connectthecables.

Note

Whenyouconnectthecables,makesurethattheyareallsecured,andableto withstandthevibrationandmovementsofthevessel.

328459/A

SimradPI50

PI50Cablelayout

ThischapterdescribestheinstallationrequirementsfortheSimradPI50cables.

Note

Allelectronicinstallationsandcorrespondingwiringmustbeinaccordancewiththe vessel’ snationalregistryandcorrespondingmaritimeauthorityand/orclassication society.

ObserveBasiccablerequirementsonpage116.

Ifnosuchguidelinesexist,werecommendthatDetNorskeV eritas(DNV)ReportNo. 80-P008«GuidelinesforInstallationandProposalforTestofEquipment»isusedas aguide.

Topics

•Cableplanonpage25

•Listofcablesonpage27

•Cabledrawingsonpage31

328459/A

Cableplan

           

Figure8Cableplan,topside

PI50Cablelayout

ADisplay

BComputer

CEthernetcabletovesselLAN(C09,optional)

DSerialcabletoReceiverUnit(C10)

Ifaloudspeakersystemisinstalled,usetheappropriateoutput(audioorUSBdepending onthespeakersystem)ontherearsideofthecomputer.

328459/A

SimradPI50

Figure9Cableplan,ReceiverUnit

ASerialcabletoProcessorUnit(C10)

BReceiverUnit

CPowersupply

DHydrophone

Notethattheindividualunitsarenotdrawntoscale.

328459/A

PI50Cablelayout

Listofcables

ThelistbelowspecieseachcableusedonthePI50system.Referencesaremadetothe locationofconnector(s),detailedcabledrawingsandspecications.

PI50Cablelist

C1PI50/C01Keyboard

Thisisastandardkeyboardcable.Itisusuallyxedtothekeyboard.The connectionnormallydependsonthemakeandmodelofthecomputer.Most recentcomputersuseaUSBplug,oldertypesusePS/2.Wirelesskeyboards arealsoavailable.

Notethatthekeyboardisanoptionalitem.ItisnotapartofthePI50delivery.

C2PI50/C02Mouse,trackballorotherpointingdevice

Thisisastandardcomputermouse,orotherpointingdevice,cable.Itisphysically attachedtothemouse.ThecableisnormallyterminatedinaUSBplug.Wireless pointingdevicesarealsoavailable.

Acommercial“trackball”pointingdeviceisprovidedwiththePI50computer.

C3PI50/C03Displaycable

Thisvideocableisnormallyprovidedwiththedisplay,anditisoftenphysically attachedtotherearsideofthedisplay.Itisastandardcommercialcable.

ThemostcommonvideoformatsandconnectorsareSVGAandDVI.Some computersalsosupporttheHMDIoutputformat.Makesurethatthecomputer’s graphicadapteristtedwithaconnectorthatmatchesthevideocableprovided withthedisplay.

→VGA/SVGADisplayonpage41

→DVI–IDisplayonpage44

C4PI50/C04Printer

AprintercanbeconnectedtothePI50computer.Acableforthisisnormally providedwiththeprinter.

ThemostcommoninterfacecableforprintersisUSB.Someoldercomputersand printersalsosupportparallelconnection(Centronics).

→UniversalSerialBus(USB)onpage42

→Parallelprinteronpage43

328459/A

SimradPI50

C5PI50/C05ComputertoACmains

Thiscableisprovidedwiththecomputer.Itisastandardcommercialmainscable.

ThedisplayendisnormallyterminatedwithanIECC13inlinesocket.Theother endisterminatedinanACconnectorsuitableforthelocalconditions.Ifthisis notthecase,youmustreplacetheACconnector.

ThePI50MarineComputeristtedwithanexternalpowersupply,anditcanalso bepoweredfromaDCsource.Observethetechnicalspecications.

→PI50MarineComputerspecicationsonpage65

→ACmains(IEC60320)onpage36

→CommercialDCpowersupplyonpage38

C6PI50/C06ColourdisplaytoACmains

Thiscableisprovidedwiththedisplay.Itisastandardcommercialmainscable.

ThedisplayendisnormallyterminatedwithanIECC13inlinesocket.Theother endisterminatedinanACconnectorsuitableforthelocalconditions.Ifthisis notthecase,youmustreplacetheACconnector.

→ACmains(IEC60320)onpage36

C7PI50/C07Colourdisplaytoground

Thisisastandardcommercialgroundingcable.Whenapplicable,connectthis cablebetweentheunitandships’ground.

Thecablemustbeprovidedbytheinstallationshipyard.

→Vesselgroundonpage35

C8PI50/C08Computertoground

Thisisastandardcommercialgroundingcable.Whenapplicable,connectthis cablebetweentheunitandships’ground.

Thecablemustbeprovidedbytheinstallationshipyard.

→Vesselgroundonpage35

C9PI50/C09Ethernettoshiplocalareanetwork(LAN)

IfthecomputerisequippedwithanEthernetconnector,itmayalsobeconnected tothevessel’slocalareanetwork(LAN).

Astandard“straight”Ethernetcableisrequired,andthecablemustbeprovided bytheinstallationshipyard.

NotethatscreenedEthernetcablesmustbeused(CA T5orbetter).

→RJ45Ethernet,straightonpage40

328459/A

+ 98 hidden pages

Simrad PI50 Installation manual

Tableofcontents

Aboutthismanual

AbouttheSimradPI50

Important

Systemdescription

Systemdiagram

Systemunits

Colourdisplay

ProcessorUnit

SensorReceiver

Hydrophone

Purseseinehydrophone

Trawlhydrophone

Portablehydrophone

Catchmonitoringsensors

Generalsupplyconditions

Equipmentresponsibility

Receipt,unpackingandstorage

Generalinstallationrequirements

Supplypower

Compassdeviation

Noisesources

Drydocking

Wiring

Supportinformation

Installationprocedures

Basicprocedure

PI50MarineComputerinstallation

Colourdisplayinstallation

ReceiverUnitinstallation

PI50Cablelayout

Cableplan

Listofcables