Simrad NSE8,NSE12,GS25,NSE8-GS25 Bundle,NSE12-GS25 Bundle Installation Instructions Manual

SIMRAD GS25 GPS Antenna SIMRAD NSE8 / NSE12

GPS Installation Instructions

SIMRAD NSE8 SVB Item: 81030
SIMRAD NSE12 SVB Item: 81031
SIMRAD GS25 SVB Item: 81471
SIMRAD NSE8-GS25 Bundle SVB Item: 81036
SIMRAD NSE12-GS25 Bundle SVB Item: 81037

GPS Installation Instructions

www.svb24.com

GS25

NSE-Series

Simnet - Micro-C

adapter cable

Terminator

Simnet-cable

Micro-C-cable

Simnet 7-connector switch

Power cable

incl. Terminator

2 Copyright SVB-Spezialversand Bremen / www.svb.de

Connecting a GS25 GPS Antenna to an NSE Series device

In order to connect a SIMRAD NSE series device to the GS25 GPS antenna,
it is necessary to establish the Simnet (NMEA2000) network rst (in case it
isn’t already available). After all of the network connections have been made
(as shown in gure below), a source scan must be performed on the NSE
display.

Please note that the network must be provided with a 12V power supply.
NMEA2000 networks don’t have multivoltage capabilities, meaning that
connecting this network to a 24V supply can cause damage to the system.