Simrad NSE8, NSE12 Quick Reference Manual
NSE8 & NSE12
Quick Reference Guide
ECHORADARCHART NAV INFO PAGES
MENU
PLOT
GO TO
MARK
VESSEL
WIN
IN
MOB
ABC DEF
123
JKLGHI MNO
456
TUV
PQRS
WXYZ
7
STBY
AUTO
PWR
809
OUT
1
2 4
6
7
9
13
12
5
8
10
11
3
1
Direct Access Keys (DAK). Provide direct access to a page. Repeated presses
of each DAK cycles through several different pages that relate to the DAK
2
PLOT/MARK key. A short press activates the Plot menu, a long press positions
a waypoint at the vessel position
3
Rotary knob. Used to maneuver in the menu system, and for context specific
operation
4
GOTO/VESSEL key. A short press activates the Goto menu, a long press
centers the chart to vessel position
5
3 (Tick) key. Activates/confirms current selection
6
X (Exit) key. Used to close dialogs, and to return to previous menu level.
Removes the cursor from the screen on radar, sonar and chart panels
7
Cursor keypad used to move the cursor on the display, and to maneuver in the
menu system
8
MENU key. A single press displays the context menu for active panel/overlay/
operation. Pressing the key twice displays the Settings menu
9
WIN key, used on multiple panels pages. A short press toggles between the
panels, a long press expands active panel to a full page panel
10 Zoom keys for radar, sonar and chart panels
11 MOB key. A long press positions a MOB waypoint at the vessel’s position
12 Alpha numeric keypad used for entering numbers and text in dialog boxes.
13
Power key. A short press activated the Light dialog, a long press turns the unit
off.
Turning the unit on/off
POWER ON STAND BY POWER OFF
PWR PWR PWR
Adjusting backlight
or
PWR
+
PWR
MENU WIN
Activating the MOB function
MOB
a MOB waypoint is positioned at the vessel’s positionthe display switch to a zoomed Chart panel, centered on vessel positionthe vessel starts navigating towards the MOB waypoint-
You cancel the navigation by pressing the
GOTO key.
When the function is activate you
can switch to the Steer panel to
see navigation info.
M
EE
Loading...