Simplicity ZT2148B, ZT2148K, ZT2352B, ZT2352K User Manual
Print Instructions for Print Vendors (Paper Manuals)
PAR
TS MANUAL
TOTAL PAGE COUNT: Less than 80
Paper Size: • 11 x 17
• Body - 50 lbs brilliant white offset or equivalent.
• Cover - on 80 lbs coated, pre-printed “grid” cover stock
(NOTE: If total order quantity is less than 100 pieces, use uncoated cover stock)
Press: • Body - 1-color, 2-sided
• Cover imprint - 1-color, 2-sided
Bindery: • Fold & Staple (2X), Face Trim, 3-Hole Drill
TOTAL PAGE COUNT: 80 or greater
Paper Size: • 8-1/2 x 11
• Body - 50 lbs brilliant white offset or equivalent.
• Cover - on 80 lbs coated, pre-printed “grid” cover stock
(NOTE: If total order quantity is less than 100 pieces, use uncoated cover stock)
Press: • Body - 1-color, 2-sided
• Cover imprint - 1-color, 2-sided
Bindery: • Perfect Bind, Face Trim (3 knife), 3-Hole Drill
GENERAL
COVERS: • Covers are located at the beginning of this package.
• Back cover is the page IMMEDIATELY AFTER the front cover.
• If supplied, the “Hardware Identification & Torque Specifications” is located IMMEDIATELY AFTER
the back cover. This page MUST be printed on the INSIDE of the BACK cover.
• Check the front cover for the individual part number (typically a 2xxxx or 182xxxx number).
• Check the front cover for the document number (TP 4xx - xxxx - xx - xx - xx)
BODY: •ODD number pages are ALWAYS right hand pages, and EVEN number are ALWAYS left hand
pages.
General: • This instruction page is NOT part of the manual and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
If you have any further questions regarding this manual, please contact Ken Cehonski in
Ferris Industries Engineering Department at (315) 495-0100 ext. 249.
THIS PAGE INTENTIONALLY BLANK
22819
Rev. No. 02
Rev. Date: 10/2003
TP 400-7034-02-CT-D
Model Number: Description:
ZT2148 Colt, w/ 21 HP Briggs & Stratton & 48” Mower Deck
ZT2148B Colt, w/ 21 HP Briggs & Stratton & 48” Mower Deck
ZT2148K Colt, w/ 21 HP Kohler & 48” Mower Deck
ZT2352 Colt, w/ 23 HP Briggs & Stratton & 52” Mower Deck
ZT2352B Colt, w/ 23 HP Briggs & Stratton & 52” Mower Deck
ZT2352K Colt, w/ 23 HP Kohler & 52” Mower Deck
Colt
Zero-Turn Riding Mower
TM
mowers are built by
Ferris Industries, a
Simplicity company.
Ferris Industries
5375 North Main Street
Munnsville, NY 13409
800-933-6175
TM
PARTS
MANUAL
Ferris Industries
5375 North Main Street
Munnsville, NY 13409
800-933-6175
www.ferrisindustries.com
© Copyright 2003 Ferris Industries
All Rights Reserved. Printed in USA.
Hardware Identification & Torque Specifications
Common Hardware Types
Hex Head Capscrew
Carriage Bolt
Standard Hardware Sizing
When a washer or nut is identified as 1/2”, this is the
nominal size
second number is present it represents the
When a bolt or capscrew is identified as 1/2 - 16 x 2” , this
means the
second number represents the
example), and the final number is the
bolt or screw (2 inches long in this example).
, meaning the
nominal size
inside diameter
, or
body diameter
threads per inch
body length
Washer
Lockwasher
Hex Nut
is 1/2 inch; if a
threads per inch.
is 1/2 inch; the
(16 in this
of the
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
Nut, 1/2”
Inside
1/4 3/4
1/2
Diameter
1
1/4 3/4
1/2
Screw, 1/2 x 2
Body
Diameter
Body
Length
2
1/4 3/4
1/2
3
1/4 3/4
1/2
Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Hardware
Grade
Size Of
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 27 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0 420 571.2
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. For prevailing torque locknuts:
use 65% of Grade 5 torque.
b. For flange whizlock nuts and screws:
use 135% of Grade 5 torque.
3. Unless otherwise noted on assembly drawings,
all torque values must meet this specification.
No
Marks
SAE Grade 2 SAE Grade 5 SAE Grade 8
3.4
3.5
4.9
5.5
in/lbs
41
43
60
68
in/lbs in/lbs
19
20
27
31
66
76
2.1
2.3
3.1
3.5
7.6 8 10.9 12 16.3
8.6 10 13.6 14 19.0
30
31
43
49
NOTES
4.6
4.9
6.8
7.7
Wrench & Fastener Size Guide
1/4
1/4” Bolt or Nut
Wrench—7/16”
5/16
5/16” Bolt or Nut
Wrench—1/2”
4
3/8
3/8” Bolt or Nut
Wrench—9/16”
7/16
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2
1/2” Bolt or Nut
Wrench—3/4”
THIS PAGE INTENTIONALLY BLANK
1
TP 400-7034-01-CT-D
© Copyright 2003 Ferris Industries. All Rights Reserved.
Table of Contents
RIDER COMPONENTS
Main Frame and Front Caster Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Floor & Brake Cover Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Seat & Seat Mount Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Control Cover, Mount & Fan Shield Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Instrument Panel Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Fuel Tank & Bumper Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Fuel Supply Hose Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Engine & PTO Group - Briggs & Stratton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Engine & PTO Group - Kohler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Pump Drive Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Motion Control Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Motion Control - Neutral Return Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Hydraulic Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Parking Brake Group-Upper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Parking Brake Group-Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Battery Mount, Reservoir Mount & Soleniod Mount Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Deck Lift Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Tire & Wheel Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Electrical Schematics - Briggs & Stratton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Electrical Schematics - Kohler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Decals - Brand & Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Decals - Safety & Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
MOWER DECK COMPONENTS
Mower Housing, Cover, Spindle and Blade Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Mower Drive Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Mower Rear Mount Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Mower Deck Roller Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
REFERENCE INFORMATION:
Torque Specification Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Inside Back Cover
2
TP 400-7034-01-CT-D
© Copyright 2003 Ferris Industries. All Rights Reserved.
The above parts group applies to the following Model Nos.:
ZT2148 Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148B Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148K Colt 21 HP Kohler Rider w/ 48” Mower
ZT2352 Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352B Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352K Colt 23 HP Kohler Rider w/ 52” Mower
Main Frame & Front Caster Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
32
4
1
5
6
7
8
See Wheel & Tire Group
for Tires & Fasteners
3
TP 400-7034-01-CT-D
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
1 1847007 1 MAIN FRAME
2 21073 2 CAP
3 25203-10 2 PIN, Cotter
4 25104 2 NUT, Hex, Slotted, 3/4-16
5 25160 2 WASHER, 3/4
6 20884 4 BEARING, Tapered Roller
7 21072 2 SEAL, Grease
8 1847049 2 CASTER YOKE
The above parts group applies to the following Model Nos.:
ZT2148 Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148B Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148K Colt 21 HP Kohler Rider w/ 48” Mower
ZT2352 Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352B Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352K Colt 23 HP Kohler Rider w/ 52” Mower
4
TP 400-7034-01-CT-D
© Copyright 2003 Ferris Industries. All Rights Reserved.
The above parts group applies to the following Model Nos.:
ZT2148 Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148B Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148K Colt 21 HP Kohler Rider w/ 48” Mower
ZT2352 Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352B Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352K Colt 23 HP Kohler Rider w/ 52” Mower
Floor & Brake Cover Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
1
2
3
11
12
11
4
7 8
5
6
10
9
7
5
TP 400-7034-01-CT-D
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
1 1847069 1 BRAKE COVER PANEL
2 25013-16 2 CAPSCREW, Hex Hd, 3/8-16 x 2
3 25156 2 WASHER, 3/8
4 47125 2 SPACER, Cover Panel
5 25128 2 NUT, Hex, Serrated Flange, 3/8-16
6 22308 2 BODY CLIP, 5/16-18
7 25011-8 4 CAPSCREW, Hex Hd, 5/16-18 x 1
8 25155 2 WASHER, 5/16
9 1847113 1 FLOOR PLATE
10 44873 1 SAFETY WALK
11 47139 2 SAFETY WALK
12 25057 2 NUT, Hex, Nylon Lock, 5/16-18
The above parts group applies to the following Model Nos.:
ZT2148 Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148B Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148K Colt 21 HP Kohler Rider w/ 48” Mower
ZT2352 Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352B Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352K Colt 23 HP Kohler Rider w/ 52” Mower
6
TP 400-7034-01-CT-D
© Copyright 2003 Ferris Industries. All Rights Reserved.
The above parts group applies to the following Model Nos.:
ZT2148 Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148B Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148K Colt 21 HP Kohler Rider w/ 48” Mower
ZT2352 Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352B Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352K Colt 23 HP Kohler Rider w/ 52” Mower
Seat & Seat Mount Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
17
1
2
3
12
16
13
4
14
5
6
7
8
15
9
10
11
12
7
TP 400-7034-01-CT-D
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
1 22363 1 SEAT, Brown (complete)
* 22363-1 1 CUSHION, Seat, Brown
* 22197-2 1 CUSHION, Back, Brown
* 22440 2 ARM REST, Black
2 1847744 1 SEAT MOUNT
3 46470 1 SEAT STOP ROD
4 20047 1 COLLAR, 5/16 Set
5 25095 2 NUT, Hex, Nylon Lock, 1/4-20
6 22673 2 RUBBER BUMPER
7 25013-48 1 CAPSCREW, Hex Hd, 3/8-16 x 6
8 25156 1 WASHER, 3/8
9 46586 1 SPACER, Seat Spring
10 22798 1 SPRING, Compression
11 25326 1 WASHER, 3/8 x 2
12 25096 3 NUT, Hex, Nylon Lock, 3/8-16
13 25029 2 NUT, Hex, #10-24
14 22095 1 SWITCH, NO/NC
15 25270 2 SCREW, #10-24 x 1
16 25057 4 NUT, Hex, Nylon Lock, 5/16-18
17 25013-32 2 CAPSCREW, Hex Hd, 3/8-16 x 4
The above parts group applies to the following Model Nos.:
ZT2148 Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148B Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148K Colt 21 HP Kohler Rider w/ 48” Mower
ZT2352 Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352B Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352K Colt 23 HP Kohler Rider w/ 52” Mower
8
TP 400-7034-01-CT-D
© Copyright 2003 Ferris Industries. All Rights Reserved.
The above parts group applies to the following Model Nos.:
ZT2148 Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148B Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148K Colt 21 HP Kohler Rider w/ 48” Mower
ZT2352 Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352B Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352K Colt 23 HP Kohler Rider w/ 52” Mower
Control Cover, Mount & Fan Shield Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
1
2
4
3
6
5
See Floor & Brake Panel Group
1
7
6
8
5
6
12
9
10
13
11
16
19
5
18
17
15
14
19
11
6
16
21
20
22
24
12
7
11
23
10
14
9
13
7
15
9
9
TP 400-7034-01-CT-D
REF NO. PART NO. QTY. DESCRIPTION
Control Cover, Mount & Fan Shield Group
Footnotes:
1 1719230 2 HEADLIGHT ASSEMBLY, Complete
* 1719226 2 Headlight
* 1719227 2 Bezel
2 1846780 1 CONTROL COVER-RH
3 22030 1 VALVE, Fuel Shut Off
4 1719392 1 CUP HOLDER
5 25011-6 14 CAPSCREW, Hex Hd, 5/16-18 x 3/4
6 25155 14 WASHER, 5/16
7 25127 14 NUT, Hex, Serrated Flange, 5/16-18
8 1846706 1 SUPPORT, Cover-RH
* 1846705 1 SUPPORT, Cover-LH (not shown)
9 25128 6 NUT, Hex, Serrated Flange, 3/8-16
10 1846704 2 SUPPORT, Control Cover
11 25013-6 10 CAPSCREW, Hex Hd, 3/8-16 x 3/4
12 1846887 2 SUPPORT, Control Cover
13 1845887 2 DEBRIS GUARD
14 22395 4 RUBBER ISOLATOR
15 1845890 2 TANK MOUNT BAR
16 25156 10 WASHER, 3/8
17 25154 4 WASHER, 1/4
18 25010-6 4 CAPSCREW, Hex Hd, 1/4-20 x 3/4
19 1846890 2 FAN SHIELD MOUNT
20 22649 4 BODY CLIP, 3/8-16
21 22665 4 BODY CLIP, 1/4-20
22 1846645 2 FAN SHIELD
23 1846770 1 MOUNT, Oil Filter
24 1846779 1 CONTROL COVER-LH
The above parts group applies to the following Model Nos.:
ZT2148 Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148B Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148K Colt 21 HP Kohler Rider w/ 48” Mower
ZT2352 Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352B Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352K Colt 23 HP Kohler Rider w/ 52” Mower
10
TP 400-7034-01-CT-D
© Copyright 2003 Ferris Industries. All Rights Reserved.
The above parts group applies to the following Model Nos.:
ZT2148 Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148B Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148K Colt 21 HP Kohler Rider w/ 48” Mower
ZT2352 Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352B Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352K Colt 23 HP Kohler Rider w/ 52” Mower
Instrument Panel Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5
2
4
8
11
3
9
10
7
1
12
6
13
11
TP 400-7034-01-CT-D
REF NO. PART NO. QTY. DESCRIPTION
Instrument Panel Group
Footnotes:
1 1846758 1 INSTRUMENT PANEL
2 22180 1 SWITCH, PTO
3 1703799 1 SWITCH, Headlight
4 20060 1 HOURMETER
5 21663 1 CABLE, Choke Control (Briggs)
* 21675 1 CABLE, Choke Control (Kohler)
6 21887 1 CABLE, Throttle Control (Briggs)
* 21662 1 CABLE, Throttle Control (Kohler)
7 20927 1 SWITCH, Ignition, Complete (includes Ref No. 8-10)
8 22789 1 KEY, Ignition, Molded (Set of 2)
9 22790 1 COVER
10 22791 1 PLASTIC NUT
11 25010-6 2 CAPSCREW, Hex Hd, 1/4-20 x 3/4
12 22308 4 BODY CLIP, 5/16-18
13 25126 2 NUT, Hex, Nylon Lock, 1/4-20
The above parts group applies to the following Model Nos.:
ZT2148 Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148B Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148K Colt 21 HP Kohler Rider w/ 48” Mower
ZT2352 Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352B Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352K Colt 23 HP Kohler Rider w/ 52” Mower
12
TP 400-7034-01-CT-D
© Copyright 2003 Ferris Industries. All Rights Reserved.
The above parts group applies to the following Model Nos.:
ZT2148 Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148B Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148K Colt 21 HP Kohler Rider w/ 48” Mower
ZT2352 Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352B Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352K Colt 23 HP Kohler Rider w/ 52” Mower
Fuel Tank & Bumper Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
2
1
3
4
5
11
6
12
7
21
20
22
15
8
9
13
10
15
12
14
16
16
17
18
16
19
13
TP 400-7034-01-CT-D
REF NO. PART NO. QTY. DESCRIPTION
Fuel Tank & Bumper Group
Footnotes:
1 1846698 1 FUEL TANK TIE BAR (Briggs)
* 1847347 1 FUEL TANK TIE BAR (Kohler)
2 25299-6 4 SCREW, Allen Hd, 1/4-20 x 3/4
3 45496 2 CAP w/ Gauge
4 45494 1 FUEL TANK-RH, Complete (includes Ref 9 & 10)
5 22395 4 RUBBER ISOLATOR
6 25126 4 NUT, Hex, Nylon Lock, 1/4-20
7 1846489 1 MOUNT, Tie Bar-RH (Briggs)
* 1847348 1 MOUNT, Tie Bar-RH (Kohler)
8 25011-6 4 CAPSCREW, Hex Hd, 5/16-18 x 3/4
9 1654930 2 RUBBER BUSHING
10 1674231 2 ELBOW FITTING
11 22394 4 RUBBER BUSHING
12 25155 4 WASHER, 5/16
13 25011-10 4 CAPSCREW, Hex Hd, 5/16-18 x 1-1/4
14 1846682 1 MOUNT, Fuel Tank-RH
15 25128 6 NUT, Hex, Serrated Flange, 3/8-16
16 25156 6 WASHER, 3/8
17 25013-8 2 CAPSCREW, Hex Hd, 3/8-16 x 1
18 25013-10 4 CAPSCREW, Hex Hd, 3/8-16 x 1-1/4
19 1846703 1 BUMPER
20 1846683 1 MOUNT, Fuel Tank-LH
21 45495 1 FUEL TANK-LH, Complete (includes Ref 9 & 10)
22 1846490 1 MOUNT, Tie Bar-LH (Briggs)
* 1847349 1 MOUNT, Tie Bar-LH (Kohler)
The above parts group applies to the following Model Nos.:
ZT2148 Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148B Colt 21 HP Briggs & Stratton Rider w/ 48” Mower
ZT2148K Colt 21 HP Kohler Rider w/ 48” Mower
ZT2352 Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352B Colt 23 HP Briggs & Stratton Rider w/ 52” Mower
ZT2352K Colt 23 HP Kohler Rider w/ 52” Mower
Loading...