Specifications and Main Features
- Model: Pow’rMax 4041
- Manufacturer: Simplicity Manufacturing Co., Inc.
- Engine: Onan (specific model number not provided)
- Power: Specific horsepower rating not provided
- Transmission: Hydrostatic with 3-speed gear transmission
- Fuel Capacity: Approximately 3.8 gallons
- Oil Capacity (Engine): Specific quarts not provided
- Battery Voltage: 12 Volts
- Tire Options: Agricultural, Turf, High Flotation
- Tread Width Adjustment: Adjustable for rear agricultural tires
- Weighting: Optional calcium chloride solution in tires
- Attachments compatibility: Front mounted, center mounted, rear mounted attachments available
- Safety Features: Neutral safety switch, ignition key removal safety
- Operator Controls: Engine speed control lever, hydrostatic transmission control lever, hydraulic lift control lever
- Recommended Engine Oil: SAE 5W30 below 30°F; SAE 30 above 30°F
- Maintenance Intervals: Scheduled maintenance chart provided for every 5, 25, 50, 100, 200, and 400 hours
Frequently Asked Questions
Q: What type of fuel should I use for the Pow’rMax 4041?
A: Use clean, fresh, regular grade automotive gasoline.
Q: How often should I change the engine oil?
A: The engine oil should be changed every 50 hours of operation, with the first change after 25 hours.
Q: Are there any concerns with the Pow’rMax 4041 and wrt to children operating it?
A: Children are not permitted to operate the vehicle, only trained adults should operate the vehicle.
Q: I used my tractor in an area with dusty conditions, how can I keep the equipment working?
A: Service the air cleaner element more regularly than normal, and replace the engine oil and oil filter more often than every 50 hours.
Q: How can I verify that the right amount of oil is in the engine?
A: Oil dipstick : Unscrew the “oil filler cap- dipstick”, wipe it, insert it in place then remove it and compare the oil level with the dipstick markings.
Q: Are there any attachments that can be used with the Pow’rMax 4041?
A: Yes, a wide range of front, center and rear mounted attachments can be fitted to work with the tractor.
Q: What if the OIL light comes on while I am using the machine?
A: First of all, turn off the engine, and check the crankcase oil level and fill it up to the required level.
Q: What is the correct procedure to start the Pow’rMax 4041?
A: To start the engine, put the ignition key in the ignition, sit on the seat, make sure the hydrostatic transmission control lever is in the neutral position and the power take-off clutches are off.
User Manual
Loading...