Specifications and Main Features
- Manufacturer: Simplicity Manufacturing Company
- Model: M10 Lh Landlord Riding Tractor
- Engine: Stratton Briggs Model Number 243431 10 H P Type 0123
- Transmission Capacity: SAE 90 oil – 1.5 quarts
- Tire Pressure: 12 psi for front tires, 7 psi for rear tires
- Battery:. Maintenance-free busts and separators; vent caps must be tight
- Grease fittings: 3 (2 for the front spindles, 1 for the rear axle tube)
- Starting: Schneider EM electrical starter, Schneider M manual start option
- Total lubricants Required: Automotive grease for 3 grease fittings, SAE 90 unto bevel gear housing
- Warranty: One year’s warranty against defects in materials and workmanship
- Rear lift group installation: Includes instruction on connecting and adjustment
- Instructions: To enable the proper function of the tractor, mechanical adjustment of the cutter-clutch and the brake is necessary, 2 parts
- Hydraulic lift group: Only for models Mfrs. No. 351; contains details of assembly.
- Weight: Not determined.
- Dimensions: Not determined.
Frequently Asked Questions
- Q: Engine Question? Which engine component is found within the tractor?
- Indicates that the tractor uses a Briggs & Stratton Motor Model Type No. 243431 10 H P.
- Q: In what way do I turn on the tractor?
- A: If you prefer electric start, turn the gear shift to neutral position, use the choke lever and press the starter button. Alternatively, You can crank the tractor without engaging the battery by pulling the starter rope.
- Q: Between six, two and ten pounds of pressure, which number best describes the recommended tire pressure?
- A: While the front tires can maintain a pressure anywhere from 10 to 14 lbs psi, 6 to 8 lbs psi would be ideal for the rear ones.
- Q: Is there a particular time frame when I should lubricate the tractor?
- A: It would be best to consider doing the lubrication once a year, as there are 3 grease fittings present in the tractor which require automotive grease.
- Q: What else is included in the warranty deal?
- A: Lease subscribers can apply for a warranty that lasts one year and covers both material and works but, be aware that all labor costs and delivery costs are excluded from the warranty.
User Manual
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Loading...