7.2 Treatment steps
1. Make sure your skin is clean, dry and free from powder, cream or gel.
2. Make sure that the rubber cap (#2), filter (#3), and treatment tip (#1) are
rmly in place. For your rst few treatments, be sure to use the Fin e
treatment tip.
3. Press the control button (#4) to turn on the device. Your Silk’n Reveal is
ready for use in low suction mode.
4. Apply the treatment tip rmly to your skin so that you feel the suction.
5. Work each area as recommended in section “6.1 Treatment areas”.
6. To m ove f ro m l ow t o h i gh s u ct io n m od e, p re ss t he control button
again.
7. To sw it ch o the device after t reatment, shor t press the control button
once or twice, depending on which suction mode you are in.
8. Unplug the device and store it in its original box. Please refer to section
“8. Maintenance”.
7.3 After treatment
Try not to expose recently treated areas of skin to sunlight. Be sure to
apply sunscreen SPF 30 or higher when out in the sun.
You may wish to a pp ly a f ac ia l ma sk , or apply a day o r ni gh t cr ea m.
8. Maintenance
It is important to clean your Silk’n Reveal device and store it properly after each
treatment.
L
First, unplug the device.
L
To clean the device, wipe with a clean, dry cloth. Never use
acetone or other abrasive uids, because they will damage
your device.