SIG SAUER P238, P938-TGL User Manual

PX38-TGL TRIGGER GUARD LASER

OWNER’S MANUAL

PX38-TGL TRIGGER GUARD LASER

The PX38-TGL Trigger Guard Laser for the P238® and P938™ Pistols is a compact, light­weight red laser used for targeting. The PX38-TGL integrates pinpoint accuracy and rapid
target acquisition with intuitive operation in a form fi tting package that weights only 1.0 oz.

FEATURES

• Ambidextrous on / off switches

• Compact form factor blends with the lines of the P238 and P938

• Convenient low profi le mounting

• Windage & elevation adjustments

CONTENTS

1. PX38-TGL Trigger Guard Laser 2. Instructions 3. 3V CR1/3N Lithium Battery

4. 1.5 mm allen key (windage & elevation adjustment)

Left side cover

Laser

Elevation
adjustment screw

Allen head cover screw

On/Off Switch

Battery
Compartment

Allen head cover screw

On/Off Switch

Windage
adjustment screw

Elevation
adjustment screw

INSTRUCTIONS

Install Battery

• Remove (2) allen head screws
(left side)

• Remove left side cover

• Position battery matching the positive

(+) and negative (-) terminals.

Operation

• momentarily depress on/off switch to
activate laser

• momentarily depress on/off switch to
turn off laser

• Switching operates from either side

Laser

Mounting on fi rearm

• Ensure fi rearm is empty and clear of all
ammunition

• Position laser assembly over trigger
guard as shown

• Replace left side cover & install (2) allen
head screws

Laser Adjustment

• to adjust laser windage or elevation, use
allen key

• clockwise moves dot right/down

• counterclockwise moves dot left/up