SIG SAUER DQM-7 User Manual

DQM-7 RIFLESCOPE

OWNER’S MANUAL

DQM-7 RIFLESCOPE

The DQM-7 Riflescope gives you 1.75X to 5X magnification and a
crosshair reticle in a compact, lightweight design, ideal for fast and
accurate target acquisition. This lightweight scope comes with clear
yellow, anti-glare scope cover, and M1913/Weaver rail mount rings.
Anodized aluminum construction ensures optimal performance in the
most extreme conditions.

CONTENTS

1. DQM-7 Riflescope 2. Owner’s Manual

FEATURES

• Crosshair reticle

• 1.75X to 5X magnification

• Windage & elevation adjustments

• Anti-reflex & multilayer band pass optical coating reticle lens

• M1913/Weaver rail mount rings

• Clear yellow, anti-glare scope cover

DQM-7 RIFLESCOPE

Magnification

Power/Obj. lens

Reticle type

Eye Relief

Exit Pupil

Parallax setting

Optical coating

Field of view

Adjustment range

Windage/elevation

Mounting

Temp range

Water resistance

Length/diameter

Weight

1.75X–5X

.8” / 20mm

Crosshair reticle

3.9”–2.8” / 98mm–68mm

.5”-.2” / 13.3mm–4mm

100 yds

Anti-reflect & multilayer band pass

13-4.7 degrees, 23.6-8.2m@100m

.5 degrees

1/2”@100 yds

M1913/Weaver

-5 degrees F to +130 degrees F

0.5m for 20 minutes

5.8” x 1.2” (146mm x 30mm)

11.9 oz / 335g

DQM-7 RIFLESCOPE

ELEVATION
ADJUSTMENT TURRET

M1913/WEAVER
RAIL MOUNT RINGS

ANODIZED
ALUMINUM
SCOPE BODY

WINDAGE
ADJUSTMENT
TURRET

MAGNIFICATION RING

FOCUS ADJUST­MENT RING

CLEAR YELLOW,
ANTI-GLARE
SCOPE COVER

INSTRUCTIONS

Mounting on firearm:
To mount on M1913/Weaver accessory rail:

• Loosen locking bolts on rings using coin or screwdriver

• Mount on rail, making sure you rotate scope tube so that vertical and

horizontal cross hairs are level to the rifle. Adjust position of the scope
forward or backward on rifle for proper eye relief. Secure by tightening
locking bolts on rings.

Getting Started:
Focus & Magnification:

• With scope positioned within 3 to 4 inches from your eye to the eyepiece
lens, turn focus adjustment ring until the reticle is in focus.

• Adjust magnification by turning the magnification ring to the desired setting,
from 1.75 to 5.

• Adjust windage and elevation by removing turret covers and turning the
handwheel –

• For elevation: counterclockwise: move impact up – clockwise: move impact
down.

• For windage: counterclockwise: move impact right – clockwise: move
impact left. 1 click 1/2”@100 yds. Secure covers once set.

STATEMENT OF LIABILITY

This device is classified as a FIREARMS ACCESSORY and is sold by us with the specific understanding
that we are not responsible in any manner whatsoever for its safe handling or resale under local laws
and regulations. SIG SAUER lnc. shall not be responsible in any manner whatsoever for malfunctioning
of the firearm, for physical injury or for property damage resulting in whole or in part from (I) criminal
or negligent discharge, (2) improper or careless handling, (3) unauthorized modifications, (4) defective,
improper, hand-loaded, or reloaded ammunition, (5) corrosion, (6) neglect, or (7) other influences beyond
our direct and immediate control. This limitation applies regardless of whether liability is asserted on the
basis of contract, negligence or strict liability (including any failure to warn). Under no circumstances shall
SIG SAUER Inc. be liable for incidental or consequential damages, such as loss of use of property,
commercial loss and loss of earnings or profits.

SIG SAUER® LIMITED ONE YEAR WARRANTY

SIG SAUER® warrants that the enclosed accessory was originally manufactured free of defects
in material, workmanship and mechanical function, and agrees to correct these defects by repair,
adjustment or replacement, at the option of SIG SAUER, with items of the same or comparable quality;
provided, however, that the accessory is returned freight prepaid to SIG SAUER at 18 Industrial Drive,
Exeter, NH 03833 by the original purchaser within one year of the date of purchase.

This limited warranty is null and void if the accessory has been misused, damaged (by accident
or otherwise), or if unauthorized repair or any alteration, including of a cosmetic nature, has been
performed on the accessory. This limited warranty does not apply to normal wear and tear of any parts.

Subject to the foregoing, this limited warranty confers the right to have the covered accessory
or its parts repaired, adjusted or replaced exclusively by the original purchaser, which right is
not transferable to any other person. NO IMPLIED WARRANTIES OF ANY KIND, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE MADE
HEREIN, and this warranty does not apply to any accessory items attached or appurtenant to
this accessory. In no event shall SIG SAUER be liable for incidental or consequential damages
arising from or in connection with this limited warranty.

18 Industrial Drive, Exeter, NH 03833
[phone] • www.sigsauer.com

P/N 8500509 rev. 4/11