238-tGL P328 tRiGGeR GUaRD LaSeR
oWneR’S manUaL
238-tGL P238 tRiGGeR GUaRD LaSeR
The 238-TGL Trigger Guard Laser for the P238 Pistol is a compact, lightweight red laser used for targeting. The 238-TGL integrates pinpoint accuracy
and rapid target aquisition with intuitive operation in a form fi tting package
that weights only 1.0 oz.
featUReS
• Ambidextrous on / off switches
• Compact form factor blends with the lines of the P238
• Convenient low profi le mounting
• Windage & elevation adjustments
ContentS
1. 238-TGL P238 Trigger Guard Laser 2. Instructions 3. 3V CR1/3N Lithium
Battery 4. 1.5 mm allen key (windage & elevation adjustment)
On/Off Switch
Left side cover
Laser
Elevation
adjustment screw
Allen head cover screw
On/Off Switch
Allen head cover screw
Battery -
Battery +
Windage
adjustment screw
Elevation
adjustment screw
inStRUCtionS
Install Battery
• Remove (2) allen head screws
(left side)
• Remove left side cover
• Position battery as show,
+ facing down
Operation
• momentarily depress on/off switch
to activate laser
• momentarily depress on/off switch
to turn off laser
• Switching operates from either side
Laser
Mounting on fi rearm
• Ensure fi rearm is empty and clear
of all ammunition
• Position laser assembly over
trigger guard as shown
• Replace left side cover & install (2)
allen head screws
Laser Adjustment
• to adjust laser windage or
elevation, use allen key
• clockwise moves dot right/down
• counterclockwise moves dot left/up
SPeCifiCationS: 238-TGL P238 TRIGGER GUARD LASER
Dimensions
Weight w/batteries
Visible Laser
Laser switching
Battery
Power management
3.0” L x 0.7” W x 1.3” H
1.0 oz / 28 g
Hi Visibility (635nm), Class IIIa, Red
Steady on/off
CR1/3N Lithium or equivalent
Digital integrated circuit
*Lumens based on LED manufacturers specifications
Laser Information
Laser Type:
Class IIIa visible laser diode
Peak Power: 3mW
Wavelength: 635nm
Beam Color: Red
This product conforms with
21 CFR 1040.10.
WARNING: Do not point the laser beam at eyes. Permanent
eye damage can result. See attached warning label -
WaRninGS
Before handling any firearm with the PRODUCT attached, read and understand the entire
contents of your firearms manual (especially the safety precautions and procedures for
safe firearms handling) and the PRODUCT manual. Failure to follow safety precautions
when handling a firearm with the PRODUCT attached can result in damage to property,
serious injury, or death. Once the PRODUCT is attached to the firearm, the firearm will be
pointed at anything the PRODUCT is directed at. Do not point the PRODUCT at anything
or anyone that you do not intend to shoot.
The ON / OFF switch on the PRODUCT allows operation of the laser without placing
your finger inside the firearm trigger guard. Always keep your fingers off the trigger and
outside the trigger guard until you are ready to fire the weapon. Always verify the weapon
is free of ammunition and the chamber clear per the weapon’s operators manual before
attempting to mount or dismount the PRODUCT on the weapon. Always dismount the
PRODUCT from the weapon when performing maintenance, cleaning the PRODUCT, and
when replacing batteries. Never place your hand in front of the weapon muzzle when
adjusting the PRODUCT.
Do not operate the PRODUCT around cleaning solvents or flammable/combustible
materials, in environments involving gasses or a flammable atmosphere, or in areas where
gasoline, paints, solvents, or other flammable liquids are stored.
When the laser dims or fails to illuminate, change batteries. Follow battery manufacturers’
instructions for the proper handling, storage, and disposal of batteries. Do not store the
PRODUCT with batteries installed.
Statement of LiabiLity
This device is classified as a FIREARMS ACCESSORY and is sold by us with the specific
understanding that we are not responsible in any manner whatsoever for its safe handling or
resale under local laws and regulations. SIG SAUER lnc. shall not be responsible in any manner
whatsoever for malfunctioning of the firearm, for physical injury or for property damage resulting
in whole or in part from (I) criminal or negligent discharge, (2) improper or careless handling,
(3) unauthorized modifications, (4) defective, improper, hand-loaded, or reloaded ammunition,
(5) corrosion, (6) neglect, or (7) other influences beyond our direct and immediate control. This
limitation applies regardless of whether liability is asserted on the basis of contract, negligence
or strict liability (including any failure to warn). Under no circumstances shall SIG SAUER Inc. be
liable for incidental or consequential damages, such as loss of use of property, commercial loss
and loss of earnings or profits.
SiG SaUeR® LimiteD Lifetime WaRRanty
SIG SAUER® warrants that the enclosed accessory was originally manufactured free of defects in material,
workmanship and mechanical function. For the lifetime of the original purchaser, SIG SAUER agrees to
correct any defect in the accessory for the original purchaser by repair, adjustment or replacement, at
SIG SAUER’s option, with the same or comparable quality components (or by replacing the accessory at
SIG SAUER’s option); provided, however, that the accessory is returned freight prepaid to SIG SAUER at
18 Industrial Drive, Exeter, NH 03833.
This limited warranty is null and void if the accessory has been misused, damaged (by accident or
otherwise), or if unauthorized repair or any alteration, including of a cosmetic nature, has been performed
on the accessory. This limited warranty does not apply to normal wear and tear of any parts.
Subject to the foregoing, this limited warranty confers the right to have the covered accessory or its parts
repaired, adjusted or replaced exclusively upon the original purchaser, which right is not transferable to
any other person. No implied warranties of any kind are made herein and this warranty does not apply to
any accessory items attached or appurtenant to the accessory. In no event shall SIG SAUER be liable for
at incidental or consequential damages arising from or in connection with this limited warranty.
ContaCt
18 Industrial Drive, Exeter, NH 03833
(603) 772-2302 • www.sigsauer.com
P/N: 1201149 REV 2.0