Sigma Sport ROX 7.0 GPS Quick Start Guide
MORE
INFORMATION
WWW.SIGMA-QR.COM
ROX GPS 7.0
QUICK START GUIDE
EN
1
ENGLISH
DEENFRITESNLPLCZPTHUSISKTRBGRUDKFI
Contents
1 Packaging contents
2 Assembly
3 Before initial use
Packaging contents
1
Black or white ROX GPS 7.0
bike computer
EN
4 Operation / Button functions / Menu overview
5
Train with ROX GPS 7.0 /
This is how I start a recording
GPS bracket
6 Load track
7
How do I get the Strava segments
on the ROX GPS 7.0?
8 Memory
USB type - A to micro-B
cable
9 Settings
10 Function overview
11 Technical data
12 Notes
Mounting material
13 Guarantee, Warranty, Legal Disclaimer
Foreword
Quick Guide ROX GPS 7.0
Thank you for choosing a bike computer from SIGMA SPORT®.
MORE
Your new ROX GPS 7.0 will be a loyal companion for your bike trips for years to
come. To familiarise yourself with and learn how to use the many functions of
your new bike computer, please read these operating instructions carefully.
SIGMA SPORT® wishes you hours of fun and enjoyment with your ROX GPS 7.0.
INFORMATION
WWW.SIGMA-QR.COM
ROX GPS 7.0
QUICK START GUIDE
1
DATA CENTER
2 3
Assembly
2
Before initial use
3
NOTE
?
or
Fully charge the ROX GPS 7.0.
Charge the device using the micro USB cable and the USB port on your PC.
Alternatively, use the USB charger. The process takes approximately 3 hours.
To charge the device, plug the USB cable into the micro USB port on the back of
the ROX GPS 7.0 and the USB port on your PC or the USB charger (not included
in the delivery).
EN
3.1 Initial use
1. Press and hold the START button for 5 seconds (right upper button).
2. Press START to change the language.
3. Now press the PLUS or MINUS buttons to select your desired language
and then press the START button.
4. Configure the remaining settings using the same principle.
Operation / Button functions /
4
Menu overview
4.1 Operating concept
A continually visible navigation level makes the
ROX GPS 7.0 menu navigation far easier for the
user. The possible functions of the BACK and
ENTER buttons are displayed in this level to:
−
Go to the next level down (START),
−
Go back to the next level up (STOP)
−
To scroll within the menu level forward or
backward or to increase or reduce values
(PLUS or MINUS)
CLICK!
4 5
4.2 Button functions
STOP button :
Press this button to exit the
sub-menus or stop a running
data log.
START button:
Press this button to reach the
sub-menus or start the data log.
During a data log you can also
press this button to start a new lap.
Press and hold the button to switch
the ROX GPS 7.0 on and off.
EN
MINUS button:
Use this button to change the training
views during training. In the menu, navigate
through the separate points or reduce
a value to be set.
Enable/Disable light mode
By simultaneous pressing of the PLUS and MINUS
buttons the light mode is activated or deactivated.
6 7
PLUS button:
Use this button to change the
training views during training.
In the menu, navigate through
the individual points or increase
a value to be set.
ONLY IN TRAINING
Press and hold to open the
Quick Menu in training.
4.3 Menu overview
Training
Select
sport profiles
Start
training
Training with the ROX GPS 7.0 /
5
Start a recording
INFO ON THE SPORT PROFILES
The ROX GPS 7.0 has the so-called “SPORT PROFILES”. These help you to link
the different settings with the chosen sport. Thus all the important settings are
connected to the SPORT PROFILE. If you change the sport profile, functions such
as the training views and the settings for the Automatic Pause are automatically
set. Once set, there is no more need to check the settings. The training views
can only be set in the SPORT PROFILE using the DATA CENTER.
EN
Select
Driven tracks
Load track
Strava
Memory
Setting
8 9
or
stored tracks
Enable /
Disable
segment
Activities
Total Values
Personal Best
Device
Altitude
Sport profiles
Track settings
User
Firmware update
Factory reset
Select track
Select
competitor
for each
segment
sport profiles
and start
track
navigation
5.1 Start training
After the desired SPORT PROFILE has been selected, it searches for the GPS.
After a successful search of the GPS, the various views can be changed using
the PLUS or MINUS button.
To start the training or the recording, the START button must be pressed once.
If the stopwatch is running, it is always recorded.
Loading...