Sigma BSG26N User Manual

SIGMA
STAND ALONE NTSC BLACK SIGNAL
GENERATOR
BSG26N
OPERATOR'S MANUAL
P.O. BOX 448
1027 COMMERCIAL AVENUE
EAST PETERSBURG, PA 17520-0448
www.sigmaelectronics.com
SIGMA ELECTRONICS, INC.
BSG-26 SERIES
IMPORTANT SAFETY INSTRUCTIONS
Explanation of symbols used. The following symbols appear on the product.
DANGER ATTENTION Protective Ground Fuse Replacement AC High Voltage Refer to Manual (earth) Terminal RISK OF FIRE Power REPLACE FUSE AS MARKED
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a damp cloth. Do not block any of the ventilation openings. Install in accordance with the manufactures
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding -type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord form being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exist from the apparatus. Only use attachments/accessories specified by the manufacture. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
Interference Information:
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations.
1 OF 4
Loading...
+ 3 hidden pages