Siemens WD7125, WD 7105, WD7025, WD7225 Operating Instructions

Operating and Installation Instructions

WD 7105 (XQG52-7105)WD 7105 (XQG52-7105) Silver WD7125 (XQG52-7125)Silver WD7125 (XQG52-7125) Silver WD7225 (XQG52-7225)Silver WD7225 (XQG52-7225)

Silver WD7025 (XQG52-7025)Silver WD7025 (XQG52-7025)

在使用本产品前，请您仔细阅读本使用说明书。

由于不遵守该使用及安装说明书中规定的注意事项，所引起的任何故障和损失均不在厂家的保修范围内，厂家亦不承担任何相关责任。请妥善保管好所有文件。如有疑问，请与当地的客户服务中心或经销商联系。

如果您需要英文说明书，请登陆西门子家电网站下载。或您可发送电子邮件，或拨打服务热线向客户服务部门免费索取。谢谢！

Please read this specification carefully before you use the product.

Any failure and losses caused by ignoring the above mentioned items and cautions mentioned in the operation and installation instruction are not covered by our warranty and any liability. Please keep all documents in a safety place for future reference. If you have any doubt, please contact our local service center of dealer.

If you need an English user manual, please download it from siemens web. Or you can send the E-mail to service department, or you can call up service hot line for free supply. Thanks!

Website:

http://www.siemens-ha.com.cn

Email:

Careline.China@BSHG.com

Uniform customer service number in China:

4008899999

Manufacturer: BSW Household Appliances Co., Ltd. Address: 66.Wang Zhuang Road, Wux, Jiangsu Province, P.R.Chinai

Post code: 214028

Table of Contents

Operating Instructions

Disposal Information . . . . . . . . . . . . . . . . . . . . ..

Environmental Protection/Conservation Issues ..

Safety Precautions and Warnings . . . . . . . . . . . .

Your New Washer-Dryer . . . . . . . . . . . . . . . . . .

Laundry Detergents and Additives . . . . . . . . . . .

First Wash Cycle . . . . . . . . . . . . . . . . . . . . . . . .

Preparing, Sorting and Loading the Laundry . . .

Washing/Drying(Standard settings) . . . . . . . . . .

Washing/Drying(Individual settings) . . . . . . . . .

During Washing/Drying . . . . . . . . . . . . . . . . . . .

When the Programme has Ended. . . . . . . . . . .

Special Applications . . . . . . . . . . . . . . . . . . . . .

Cleaning and Care . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting Minor Faults . . . . . . . . . . . . . .

Customer Service . . . . . . . . . . . . . . . . . . . . . . .

Programme Table . . . . . . . . . . . . . . . . . . . . . .

Installation Instructions

Installation, Connection and Transport . . . . . .

Disposal Information

Dispose of packing materials in a responsible

The new machine’s packaging

Your old machine

manner. Keep packing materials out of the reach of children. Packing materials are not toys. Reprocessing and re-using materials saves raw materials and reduces waste. All packing materials used are environment friendly and re-usable. Cardboard boxes consist of 80% to 100% recycled paper. Plastic wrappings are made from polythene(PE), the tapes are made from polypropylene(PP) and the CC-free packing is made from foamed polystyrene (PS). These materials are pure hydrocarbon compounds and can be recycled.

Render the machine inoperable when it can no longer be used. Remove the plug from the socket and cut off the power cable. Destroy the catch on the porthole door. Prevent children at play from being locked in and risking death by suffocation. The old machine contains valuable materials which should be recycled. Please make your contribution to the environment by assisting with proper disposal or recycling.

Environmental Protection Conservation Issues

Through the economical use of energy, water and detergent, your appliance is kind to the environments as well as your household budget.

You can increase the economy and environ-

Hints and tips

mental friendliness of your washer-dryer by washing/drying maximum loads:

Cottons: 5.2/2.6kg Easy-Care: 2.6/1.5kg Delicates/Wool: 2.0kg Individuation: see P42 “Programme Table” Single Wash: 3.5kg

How to save energy:

For small amounts of laundry, the automatic control system reduces the consumption of both water and energy. Where possible, in Cottons programmes, select “ intensive ” programme and set the

强洗

temperature of 60 C instead of the 9 programme. a cleaning result comparable to that of the 90 C programmes, but uses considerably less energy.

The extend washing time achieves

0 C

How to save water, energy and detergent:

Avoid using the Prewash function when washing lightly normally soiled laundry.

How to save energy and time:

For lightly soiled laundry, select the short programme appropriate to the type of textile.

How to save detergent:

Add detergent according to the degree of soiling, amount of laundry and water hardness, and observe the detergent manufacture s instructions.

Save energy:

If washing is then to be dried in the appliance, select the higher spin speed - because the more water that is spun out of the appliance, the less time and energy is required to dry it.

Safety Precautions and Warnings

This machine complies with all relevant safety regulations.

Before using for the first time:

Please read the enclosed documents carefully before using the washing machine for the first time. They contain important information on the installation, use and safety of the machine.

The manufacturer does not accept liability if these instructions are not followed.

Please contact an authorized technician to install the machine and instruct the using method.

Please keep all documents in a safe place for future reference.

Install the machine in accordance with the instructions(page 44-51). Remove the transit bolts and keep them in a safe place.

The washing machine must be installed and operated in a room with the drain.

When heating, the maximum current of the washing machine is 10A,so please make sure that the power supply system(voltage; current and the cable) is applicable to the load of the applied appliance.

In order to ensure your safety, you must plug the cable into a socket which connected to earth. And please check your socket to make sure that it is connected with reliable earth correctly.

If the washing machine is visibly damaged, do not connect it up. If you are in doubt, contact your customer service representative or dealer.

This machine use thread connection water inlet hose, connect it to the water tap together with the machine according to the require of page 47. (carry out by an authorized technician)

Operation conditions:

1). Ambient temperature 0~40 C.

2). Relative humidity of air: under 95% (tested

at 25 C).

When washing and drying:

When the programme has ended:

Taking care of your machine:

When transporting the machine:

Operate the machine with cold tap water only. Your washer-dryer is designed for domestic

use only, i.e. for washing machine-washable textiles in a detergent solution.

Never use flammable; explosible and/or poisonous solvents, such as gasoline; alcohol etc. As the washing lotion. Please only use the lotions suitable for using in washer-dryer available in the market.

Never wash the carpet in the washer-dryer.

Never let children play with the washer-dryer.

Keep pets away from the washer-dryer .

Exercise caution when pumping out hot detergent solution.

Do not fill water during washing cycle manually.

Due to the use of the condensation principle in drying, please keep the connected water tap open during the drying process.

Never open the door when drying.

When the programme has ended: LCD screen displays “ ” (if “ Rinse hold ” was selected, see Page 30). A the buzzer Open the loading door after cutting the power of machine.

After the programme has ended, please cut the supply of power and water immediately.

Do not climb onto the washer-dryer.

Do not lean against the door.

Do not expose the machine in the place with causticity or explosibility gas.(e.g. dust, steam and gas, etc.)

Do not install the washer-dryer in a bathroom or a room very wet.

Please close the loading door correctly, if it is difficult to close it, please check if the laundry is distributed evenly in the drum.

Insert the transit bolts by technician.

Drain any water left in the machine.

Take care when moving the machine. Do not lift the machine by any of the protruding parts,and the loading door.

remind the end of the programme.

coustic signals of

Your New Washer-Dryer

Adding detergent/cleaning product

Dispenser I: Detergent for pre-wash or starch.

Dispenser II: Detergent for main wash, soaking agent, water softener, blench or stain remover.

Dispenser : Additives, e.g. fabric softener or former. (Fill at least to lower edge of insert 1. )

Open the loading door

and close it

Drain washing solution if necessary.

Control Panel

“开始/暂停”

“Start/Pause” touch control pushbutton

For starting/pausing the wash cycle (programme must have been selected). Pause function cannot be used during drying cycle.

Touch control buttons for additional functions

(Where required to supplement the programme)

Water plus: Greater volume of water,

高水位

improve the rinsing performance.

Easy Iron: Reduce the crease of the

免熨烫

laundry. Extra Rinse: Additional rinse cycle.

加漂洗

Additional options can be combined before the programme is started.

The indicator lights of the buttons come on, if the additional options are active.

Switch off additional option: touch button again until the indicator light goes out.

Programme selector

For switching the machine on and off and for selecting the programme. Can be rotated in either direction. The programme selector is the main switch of the washer-dryer, if it be rotated while the programme is running, the programme is terminated.

Display panel

Indicates the settings which have been selected(e.g. Spin speed, Washing temperature, End in Time, Childproof lock, Maximum load, etc)

Touch control button * Select the washing temperature.

Touch control button *

Select the spin speed or Rinse hold.

Touch control button *

Select the drying mode and drying time.

Touch control button *

Select the End in time (programmes will end in this time).

All pushbuttons implements as Touch Control pushbuttons, you can select the desired options by touching the

buttons gently. Do not touch two or more buttons in the same time except special requirments. There’s “autorepeat” function for display buttons (*). Keep pressing the button until the required option is displayed.

Control Panel

Programme status display

Display Notes

Prewash

Washing

On if selected

Not on if Rinse, Spin or Drain additional programme was selected

Rinsing

Not on if Spin or Drain additional programme was selected

Final spin/Drain

Not on if a programme with the “ ” setting(Rinse hold)

Drying

Progress bar Low water

On if drying programme selected

For the programme status On if the water pressure is low

pressure Overdosage

Childproof lock

On if too much detergent dispensed

On if selected

Fan

On during the cool down phase of drying programme

5.2kg*

Maximum load

Not on if Rinse, Spin or Drain additional programme was selected

60 C*

Default washing temperature, selected temperature or cold wash

1000*

---*

AUTO* 1:00*

1:30*

Spin speed or Rinse hold

Auto drying or Drying time

Programme

Maximum spin speed of the program or selected speed

Auto drying programme or Selected drying time

Expected programme duration

duration

Other displays at this location:

1 h*

End in time End of programme

End of programme

---

Selected end in time

with Rinse hold or

E:16*

Error display

See page 38

Pause Door can be opened

Rinsing cycles

Not on if there is no Rinse cycle or Rinse cycle is not selected.

Loading door

On if the door can be opened during “ Pause” period

Pause

* Examples of the display, it will be changed according to your machine and selected programme.

On if the programme in pause.

Programme status display

Low water pressure

Overdosage

The first row of symbols and the progress bar below form the programme status display. The progress bar consists of a frame and several segments.

When the programme has started, the almost empty bar is displayed which fills up with segments from left to right while the programme is running. The symbols indicate the programme sections which is running.

At the end of the programme all symbols have gone out and the progress bar is full.

The automatic system detects the pressure of water supply and displays if the pressure is low. The “ Pause” function cannot be activated in this detecting period.

The automatic safety system detects excessive froth in the appliance due to a highly frothing detergent or an overdosage. At the end of the programme this is indicated in the display field by the symbol. Dispense less detergent for the next wash with similar items of washing(same degree of soiling and wash load).

Overdosage of detergent may cause excessive froth formation and impair the washing and rinsing results. A rinse cycle is automatically run.

The symbol goes out when the appliance

switches off at the end of the programme or if the programme is changed.

Childproof lock

Fan

Maximum load

The activated childproof lock prevents the selected programme from being changed while the programme is running, see page 27.

The fan works at the last 10 minutes of drying duration for cooling the laundry.

Do not interrupt this cooling process.

The maximum wash/dry load is displayed depending on the selected programme and additional functions, see Page 42.

Spin speed

The default spin speed is displayed after selecting the programme, you can get required max. spin

Max. noise of spinning 66dB(A).

(

pin spee

r/mi

rog

m e

Cottons

)

Easy-care Delicates Wool

800 600 800 800 800 1000

1200 800

1200 800 800 600 800 800 800 1200

Max. S

Model

WD 7105 1000

Silver 7125

speed by touching the button.

Individu ation

Single wash

Single rinse

800

800 600 800 800 800 1200

Single spin

Silver 7025 1200 800 800 600 800 800 800 1200

Washing temperature

Default washing temperature is displayed after selecting the programme, and it can be changed by touching the button . See Page 42 “Programme Table” for detail temperature range for each programme.

Programme duration

When the programme has been selected, the expected programme duration(time after which the programme is expected to end) is displayed.

The programme duration is displayed in hours and minutes, e.g. 1:17 = 1 hour and 17 minutes 0:35 = 35 minutes. When the programme starts, the programme duration counts down in minutes.

When the programme ends, the displays shows (if select “Rinse hold” function, see Page30).

While the programme is running, the programme

duration may be extended or reduced for the following reasons. Reductions in time occur because of : small loads, reduced heating time, e.g. If the water is hot, reduce the washing temperature after the programme has started. the laundry is dry during autodrying programme

Increases in time occur because of: additional rinse cycle if excessive foam is in the laundry, multiple spinning if the laundry is distributed poorly in the drum, increased heating times, e.g. when the water is too cold or “high water level” was selected, water pressure too low, very absorbent washing extends the heating duration. the laundry is wet during autodrying programme

End in time

Selectable end in time, see Page 26.

Drying mode and time

If you want to dry laundry in the washer-dryer, you can select the drying mode or drying time by touching the button.

Automatic drying:

During drying, the temperature determines the residual moisture. The drying time is modified according to the machine load and the type of laundry. During the drying cycle, the remaining time is constantly updated in the display.

Time-controlled drying:

The drying duration is the drying time you have set by touching the button. Please see Page 43 “ Drying programme tabel ”.

In the continuous wash+dry programme, default

drying duration will add in programme duration automatically. The washing programmes will prolong 5~15 minutes for good drying performance.

Time-controlled drying-15 minutes is the cooling

down programme. If a drying process is interrupted, please select this programme to cool the laundry before you open the loading door.

Rinsing cycles

On if there is(are) rinse cycle(s) in the selected programme or “ Rinse plus” function was selected, such as “ ” the number on the left of the “+” sign means the default rinse cycles of the selected programme, and the number on the right will appear only if the you select the additional function “Extra Rinse” by touching the buttons for desired times. (Maximum 3 rinsing cycles)

Programme selector

Select the desired programme (see “Programme Table”).

Cottons 棉织物 Quick快洗, Standard标准 For hard-wearing fabrics.

Basic programme

Cottons 棉织物 Prewash+ 预洗

An energy-intensive programme for heavily soiled hard-wearing textiles made from cotton or linen.

Cottons 棉织物 Intensive 强洗 Long time washing programme, for heavily soiled textiles hard-wearing textiles made from cotton or linen.

Easy-care 化纤洗

For easy-care fabrics made from cotton, synthetics or blended fibres.

Delicates 超柔洗

For delicate, washable textiles, e.g. Silk, satin, synthetic materials or blended fabrics(e.g. curtains). No subsequent spin cycle with rinsing period.

Wool 羊毛洗 For hand or machine-washable fabrics made from wool or wool blend.

Individuation个性洗 mixed混合 , shoes 波鞋 Programmes for individual requirements.

Only canvas shoes and netlike sport shoes(less than 2 pairs) are machine washable. Use liquid detergent to achieve better washing performance. Do not wash shoes made of leather, it may causes damage to shoes and drum.

You can select the desired washing temperature, if a high temperature was selected, such as 90 C for the protection of the drainage pipe, the hot washing solution is mixed with approx.5 liters of cold water before being drained.

Programme options

Dry

White and coloured cottons and linens. High temperature drying.

Delicate drying

Reduced drying temperature. Easy-Care laundry, such as synthetics and fabric blends, as well as cotton with drip-dry finish, e.g. viscose rayon, modern acrylic and polyester.

Single wash 单洗涤 Single wash cycle without subsequent rinse cycle, you can select the rinse cycle by touching the additional function button “ Extra Rinse” if desired..

Additional function

Duration change

Max. Spin Speed

Rinse 单漂洗

Rinse cycle with subsequent spin cycle for rinsing hand-washed items or for starching. Reduced spin speed.

Spin 单脱水

Spin cycle for spinning hand-washed items after selection of required speed. Washing water or rinsing water is drained before the spin cycle.

Drain 单排水

Water is drained after a programme that the water is still in the drum, such as Rinse hold, for gentle treatment of delicate laundry.

Extra Rinse 加漂洗 Touch this button once, an additional rinsing cycle is activated, programme duration will be prolonged 6~10 min., it depends on the selected programme. The max. selectable rinsing cycles is in the table as below:

quick

Cotton

Easy-Care Individu-

ation

Delicates Wool

Single Wash Single Rinse

standard anti-bacteria prewash

Mix Sport shoes

Less Iron

免熨烫

Default rinse cycle(s)

2 3 3 3 3 3 2 2 2

Max. Selectable rinse cycle(s)

3 3 3 3 3 3 3 3

/ 3 3

Special spin cycle with post-spin loosening cycle. The laundry is left lying loosely in the drum, thus reducing creasing. After pressing this button, the washing duration and max spin speed will be changed.

Single

+6+5+6

800

Individuation

Mix

Spin

+6+4

600

Cotton

Intensive

Quick

High water level

Others

cold-60

-1 +6

800 600

Easy-Care

高水位

Delicate

Single

Wash

Rinse

High water level for achieving good rinse performance. Reduce the influence of low water pressure.

Observe the maximum load for each type of fabric; Remove the laundry immediately after the spin cycle.

Laundry Detergents and Additives

Risk of explosion

not use solvent-based cleaning agents in fully automatic washing machines. Explosion hazard. Keep detergents and additives out of the reach of children.

You can use any standard powder or liquid detergent which is suitable for automatic washing machines. Do not use any detergent boosters containing solvents or dirt and stain-removing spraying near the machine, as these could damage the machine. Do not use non-automatic detergent as these produce too much foam.

The best washing results will only be achieved

Amount of detergent

if you add the correct amount of detergent. Observe the instructions for use shown on the detergent packing.

When using liquid detergents, you can use any measuring aids provided with the detergent, such as dosage balls of bags.

Please put the liquid detergents into correct chamber.

The amount of detergent depends on:

- water hardness

- degree of soiling

- size of the load

- amount of detergent to be added according to its manufacturer.

Dispensing the correct amount of detergent relieves the strain on the environment and ensures optimum washing results.

Filling laundry detergent and/or additive dispensers

Frequent use of insufficient detergent will eventually become noticeable as follows:

- washing appears grey or not properly clean

- grey-brown stains(grease marks) form on the washing

- scale builds up on the heating elements

Too much detergent results in:

- unnecessarily high environmental pollution

- due to the generation of too much foam, the washing is hardly agitated which leads to poor washing results.

The amount of detergent indicated on its packaging refers to a full machine load.

For small loads or less soiling, reduce the amount of detergent.

Chamber I: Detergent for prewash, starch or pre-soaking agent.

Chamber II: Detergent for main wash, water softener, bleach and stain removal product.

Chamber : Additives, e.g. fabric softener of former.

- Do not fill beyond the MAX mark, otherwise will be flushed into the machine together with the detergent at the start of the program.

- If the liquid additive is thick, mix with a little water before dispensing(prevents clogging of the overflow).

Pull out the detergent dispenser up to the end stop.

Add the detergent and/or additive.

Close the detergent dispenser.

First Wash Cycle

The installation of the washing machine is finished. (see page 44-50)

Each machine has been tested in the factory. A little bit of water can be left in the drum during the test. Please carry out the first wash cycle without laundry to remove any water left over from the factory tests.

Do not load any laundry.

Turn the tape ON.

Pull the detergent drawer out as far as it will go.

Input about 1 liter of water in chamber II.

Pour half a measuring cup of detergent into chamber II. Do not use a special detergent for delicates or wollens as these will create too much foam.

Close the detergent drawer.

Close the washer-dryer door.

Turn the programme selector to “ Cotton prewash” and set the washing temperature 90 C, “Start/Pause” indicator flashes.

Touch “Start/Pause” button. The programme starts.

The LCD screen displays “ ” after the programme finished, the buzzer sounds the acoustic signal. Turn the programme selector to “ Off” .

Preparing, Sorting and Loading the Laundry

Remove any loose items or metal objects, such

Preparing the laundry

as safety pins, paper clips, etc. from the laundry.

Brush sand, coins, etc. out of pocket and cuffs.

Close zips and button up cushion covers, duvet covers, etc.

Remove curtain runners, or secure them in a net bag.

Particularly delicate items, such as tights or lace curtains, or smaller items, such as tiny socks or handkerchiefs, should only be washed in a net bag or pillow case.

Some items are best turned inside out. These included knitwear, trousers, T-shirts and sweatshirts.

Make sure that the wire-cup bras are machine washable.

Make sure that wire-cup bras in a pillow case

which can be securely closed with a zip or buttons. If the wire works itself out of the cup it may fall through the holes of the drum and cause extensive damage.

Preparing the laundry for drying

Make sure that the sport shoes are machine washable. Remove the shoelace and insole, put the shoes in the drum transversely.

Make sure that the sand, dirt at the underside

and upper of the shoe has been removed before putting it into the drum. It may blocks the outlet pipeline, influence the washing performance or causes damage to the washing machine.

Only tumble-dry textiles which have been washed, rinsed and spun.

Remove as much water as possible from the laundry. Do not touch the button for reducing the spin speed.

Before tumble-dring, ease-care items should also be spun using the appropriate spin programme (see P42 programme table)

Sorting the laundry

According to colour and degree of dirt

In order to ensure uniform drying, sort the items according to fabric type and degree of drying required.

Items which require ironing do not have to be ironed immediately after being tumble-dried. It is a good idea to fold or roll them together for a while, so that any remaining moisture is evenly distributed.

Caution

Items of clothing can become discoloured. Never wash new multi-coloured items together with other items.

White items may become grey. Always wash white and coloured items separately.

Degree of dirt

Slight dirt

No recognizable dirt or staining. Laundry may have some body odour.

- Light summer clothing and sportswear that has only been worn for a few hours.

- T-shirts, shirts and blouses that have been

used for one day.

- Bed linen and guest towels that have been

used for one day.

Normal dirt

Visible dirt and/or some light staining recognizable.

- T-shirts, shirts and blouses that are very sweaty

or have been worn several times.

- Underwear that has been worn for one day.

- Tea towels, hand towels and bed linen that have

been used for up to one week.

- Net curtains (without nicotine staining) that have

not been washed for up to 1/2 year.

Intensive dirt Dirt and/or staining recognizable.

- Kitchen hand towels that have been used for

up to one week.

Sorting laundry according to their care label specifications

- Fabric napkins.

- Children's outer clothing or football shirts and

shorts with grass and soil stains.

- working clothes such as overalls or baker's

and butcher's coats.

Typical stains

- Skin fat, cooking oils/fat, sauces, mineral oil, wax

(containing fat/oil)

- Tea, coffee, red wine, fruit, vegetables(bleachable).

- Blood, egg, milk, starch(containing protein/

carbohydrate).

- Soot, soil, sand(pigments), red sand on tennis

clothes.

Removing stains

Wherever possible, remove/pretreat stains whilst they are still fresh. First, dab soapy water onto the stain. Do not rub. Subsequently wash the items of clothing using the appropriate program. Several washing cycles may sometimes be required in order to remove stubborn/dried in stains.

Only wash laundry that is labeled with the following care symbols:

90 C Cotton + lines

60 C、40 C、30 C Cotton + lines

60 C、40 C、30 C Easy-Care

40 C、30 C Delicates

40 C、30 C Woollens (hand and machine-washable)

Laundry that is labelled with the following care symbol must not be washed in the washing machine.

Only dry laundry that is labelled with the following care symbols

= do not wash

=Tumble-dry at normal heat setting (dry)

=Tumble-dry at lower heat setting (gentle dry)

Loading the laundry

The following textiles should not be tumble-dried: Laundry marked with the care symbol:

=Do not tumble-dry

- Wollens or items containing wool. Risk of shrinking!

- Delicate fabric (silk, synthetic net curtains). Risk of creasing.

- Items containing foam rubber or similar material.

- Items which have been treated with inflammable solvents, such as stain removes, petrol, paint thinners. Explosion hazard!

- Items still containing hair lacquer or similar substances. Dangerous vapors!

- Dripping-wet laundry. Waste of energy!

Risk of explosion

！

Items of clothing that have been pretreated with solvent-based cleaning agents, e.g. Stain remover and dry cleaning spirit, represent an explosion hazard once loaded into the washer-dryer. Therefore, these items must be rinsed thoroughly by hand.

Caution:

Loose debris in the washer-dryer drum can damage the laundry. Before loading the laundry, check that there is no debris in the drum.

Open the loading door.

Unfold the sorted items of clothing and place them loosely into the drum. Mix up large and small items. Items of varying size will distribute better during the spin cycle..

Do not exceed the maximum load: Overloading will cause poor wash/dry results and encourage creasing.

When washing/drying a small amount of laundry, the washer-dryer automatically reduces the amount of the water and energy used.

Close the loading door. Take care not to trap any items of clothing between the loading door and rubber seal.

Washing/Drying(Standard settings)

Your washer-dryer can be used in three ways:

- washing only,

- drying only,

- washing and drying without a break in between.

Caution:

For uninterrupted washing and drying, the maximum load must be reduce to 2.6kg for cottons/coloureds or 1.5kg for easy-care. Furthermore, it is possible that certain types of laundry will not be dried satisfactorily using the non-stop mode.

The economic using way: wash and dry with recommended loads.

Washing

( Picture of WD 7105 with setting of Cotton “ Standard” programme as example)

Turn on the water tap.

Turn the program selector to desired program (refer to table” “Start/Pause” indicator light flashes.

me. Page 42 “Programme

The following is displayed for the selected programme: progress bar, maximum load ( do not exceed max. load), default rinse cycles, default washing temperature, default spin speed, drying duration(now shows , i.e. 0 ) programme duration.

If required, touch the button(s) for additional option(s). The programme duration, additional rinse cycles and other parameters displayed in LCD screen will changed accordingly.

Touch the “Start/Pause” button. The programme starts. The indicator light remains lit for the entire duration of the programme.

The almost empty progress bar is indicated in

the display field. While the programme is running, the programme duration counts down and the progress bar fills up with the segments. The symbols for the run programme sections appears.

Drying

Maximum washing noise approx. 53dBA.

Turn on the water tap.

Due to the use of the condensation principle in drying, please keep the connected water tap open during the drying process.

Turn the programme selector to the dry or delicate dry.

Washing drying without interruption

Touch the button to set the drying time or auto drying function. The following is displayed:

Maximum drying load, Drying time or auto drying mark, Programme duration.

Touch the “Start/Pause” button. The drying programme starts.

The almost empty progress bar is indicated in the display field. While the programme is running, the programme duration counts down and the progress bar fills up with the segments. The symbols for the run programme sections appears.

Turn on the water tap. Select desired washing programme. Select desired additional functions.

Press the button to set the desired drying time or drying mode, the programme will be washing and drying without interruption.

The indicator light of “Less Iron” goes out if it was selected, it is not available when a drying cycle comes subsequently.

The programme duration will be changed

accordingly after the drying time being set. See page 11.

The maximum load is also changed, do not

exceed recommended washing/drying loads. Do not interrupt the drying process, if it is

necessary, please select 15 minutes cooling programme before open the loading door.

The following is displayed of the programme:

default rinse cycles, maximum load ( do not exceed max. Load), default spin speed, default washing temperature, drying time or auto drying programme duration

Touch the “Start/Pause” button. The drying programme starts.

Washing/Drying(Individual settings)

You can adjust the settings to your requirements. First find a quick overview of the adjustable settings. The steps for changing the settings are described in detail overleaf.

Turn on the tap, loading the laundry, close the door.

Add correct amount of detergent, additives.

Set desired washing/drying programme.

Temperature* Spin speed*

Page 25

Or cold wash

Make fu rther s ettin gs or tou ch the “St art/P ause” b utton .

Page 25

Or rinse hold

Childproof lock**

Page 27

* Individual settings can be combined. ** This function is recommended to prevent misoperation by casual touching.

End in time*

Page 26

1-hour steps

Buzzer*

Page 28

On/Off, setting volume

Washing temperature

Spin speed

You can change the default washing temperature.

Keep touching the temperature button until the desired value displays.

For different clothing, there are different programmes with respective temperature ranges. Please refer to Page 42 “Programme table”.

The button can be touched to reduce the

washing temperature at any time when the washing programme is running( “ ” is on), the displayed programme duration will be reduced accordingly.

You can change the default spin speed.

Touch the button until required spin speed displayed.

If setting (Rinse hold) has been selected, the washing remains in the final rinsing water. Before the laundry can be unloaded, the “Pump” or “Spin” programme must be performed. Press button to select the desired spin speed; or press “Start/Pause” button directly with subsequent spin cycle with default spin speed.

The spin speed can be changed at any time by

touching the button until the desired speed is displayed. Setting “ Rinse hold” is possible until the Rinse programme section starts.

2525

End in time

Before a programme starts, you can specify by how many hours later the programme is to be ended.

Touch the button, the LCD screen will display the minimum End in time which is longer than the duration of the selected programme. (in hours) Such as the programme duration in the picture is 1 hour and 18 minutes, the selectable minimum End in time is 2h, i.e. 2 hours. Touch “Start/Pause” button after the desired End in time was selected, the End in time start counting down.

The End in time can be set in 1-hour steps. The

time can be delayed up to a maximum of 24h. If a End in time of 24h has been set, the programme duration can be accessed by touching the button again.

The End in time is counted down by the hour. When the End in time has lapsed, the programme starts automatically and the programme duration is displayed.

Changes to the End in time or an immediate

start are possible. To do this: Briefly set the programme selector to another programme. When the programme selector has been reset to the original programme, individual or all other settings may have to be reselected. If required, reset the End in time. Touch the “Start/Pause” button, the programme starts.

The background light will be off after 5 minutes when the “Start/Pause” button is touched.

Childproof lock

You can secure your washing machine to prevent selected functions from being inadvertently changed.

If the childproof lock has been selected:

no changes can be made while the programme is running,

the symbol flashes if a programme setting is inadvertently changed, should the appliance be switched off and on while a programme is running the programme will continue at the point at which it was interrupted.

when the programme finishes, the duration time is displayed as 0:01, the loading door cannot be opened, switch off the childproof lock, the loading door can be opened while the screen displays “ ”.

Activating the childproof lock

Deactivate the childproof lock

Set the programme selector to desird programme. If required, select other settings.

Load the laundry and close the loading door.

Touch the “ Start/Pause” button, the programme starts.

Touch the button and hold down(for approx. 5 seconds) until the symbol is displayed.

Release the button, the childproof lock is activated, the symbol is permanently on.

The childproof lock must be deactivated before

making programme changes or ending programmes with setting “ ” (rinse hold).

This function cannot be activated in some status, such as the programme not starts or ending programmes with setting “ ”, refer to page 30.

Press the button and hold down(for approx. 4 seconds)until the symbols goes out.

Childproof can only be deactivated when the pro-

gramme which childproof was activated is selected. For example, childproof lock was activated when the programme Cotton “Stand” was selected, the childproof lock can only be deactivated when the selected programme was not changed, otherwise the symbol flashes, and the buzzer sounds alert signal.

Signal

Start the signal mode

The acoustic signal indicates:

that the additional functions (buttons ) have been switched on or off,

Individual programme statuses (e.g. Start of programme, end of programme), operating errors and faults.

1.Set to “ ” 3. keep selected and

4. 1 step to right

Set volume for...

6. Button signals.* 6. 1 step to right 7. Information signals*

2. 1 step to right

5.release and find the number from 0 to 4

The number means the

volume from “off ” to maximum

After setting, turn the programme selector to “ ”, the volume of signal is stored.

* If required, set repeatedly.

During washing/drying

If you have accidentally selected the wrong programme:

Changing the programme

Cancelling the programme

If the childproof lock is active, temporarily deactivate, see page 27.

Turn the programme selector to “ off ”.

Turn the programme selector to the desired programme. The “Start/Pause” indicator light flashes.

Touch the “Start/Pause” button. The “Start/Pause” indicator light comes on and the new programme starts.

If you wish to prematurely end a programme:

If the childproof lock is active, temporarily deactivate, see page 27.

Turn the programme selector to “ off ”.

Turn the programme selector to “Drain”, “Spin” or 15min cooling programme. Touch the “Start/Pause” button.

Remove the laundry after spin or drain programme finished.

Interrupting the programme

If you want to add/remove the laundry during active programme and the set programme sequence will not be changed.

Touch the “Start/Pause” button during the working cycle, LCD display shows “ ”and “ ”(pause), if “ ” flashes at this moment means the door can be opened after one minute later, when the “ ” and “ ” appear, open the door, add/remove the laundry. Close the door.

To continue the interrupted programme, touch the “Start/Pause” button again. The programme starts.

The pause function cannot be activated during the drying cycle and water pressure detecting period. If there is high water level or temperature in the drum, the door open sign does not appear, the door cannot be opened also.

When the programme has ended

Display panel:

All symbols on the programme status display have gone out, the full bar, washing temperature spin speed drying time and default rinse cycles are displayed.

The programme duration is on .

If the childproof lock is selected, the symbol illuminates, the programme duration is on 0:01, please deactivate the childproof lock, see page 27.

If the detergent was overdosed, the symbol illuminates.

If the water pressure is low, the symbol illuminates.

The background light will be off after 5 minutes.

Turn the program selector to off position.

Setting (Rinse hold ) selected

Display panel:

sign, default rinse cycles (no display if there is not rinse cycle in the programme), the full bar and the washing temperature are displayed.

The programme duration and spin speed are on .

If the childproof lock is selected, the symbol illuminates.

If the detergent was overdosed, the symbol illuminates.

If the water pressure is low, the symbol illuminates.

If required, deactivate the childproof lock.

Select “Drain” or “Spin”, touch button, select required spin speed; or touch “Start/Pause” button directly with default spin speed.

Turn the programme selector to off position when the programme is finished.

Unloading the laundry

Turn off the water tap.

Open the loading door.

If the loading door can not be opened: Wait for 2 minutes ( the safety function is active ) until the programme duration is on or there is still water in the washing machine if Rinse hold option was selected. In the latter case, select “Drain” or “Spin” programme.

Unload the laundry.

Caution:

Remove any debris (e.g. Coins, paper clips ) from the drum and rubber seal---risk of rust formation!

Leave the loading door open to allow the inside the washing machine to dry out.

Special Applications

Pre-soak

Starching

Load laundry of the same color.

Add the pre-soak agent to chamber II according to the manufacturer’s specifications.

Turn the programme selector to “Quick”, Cottons/coloureds, and set the washing temperature to 30 C.

Touch the “Start/pause” button and the programme starts.

After approx. 10 minutes, turn the programme selector to Off . The laundry is left to lie in the water.

Select a programme after the desired soaking period.

Do not add any additional detergent. The presoak solution continues to be used in the wash programme.

The laundry must not be treated with fabric softener,

Load the laundry.

Dispense the correct amount of starch for approx. 15 liters of water. Powered starch must first be dissolved in water according to the manufacturer’s specifications.

Turn the programme selector to “Rinse” .

Touch the “Start/Pause” button.

As soon as water starts to enter the machine:

Pull out the detergent dispenser slightly.

Add the starching solution to chamber I.

Close the detergent dispenser.

Cleaning and Care

Risk of electric shock!

Always disconnect the appliance from the mains before cleaning.

Never clean the washing machine with a jet of water.

Risk of explosion!

Never use solvents to clean the appliance.

As required:

Cleaning the appliance housing and control panel

Cleaning the drum

Use hot soapy water or a mild, non-abrasive cleaning agent.

Rub dry with a soft towel.

In the event that rust spots have formed due to leftover debris(e.g. coins, paper clips, needles,nails):

Use a chorine-free cleaning agent. Follow the manufacturer’s instructions. Never use steel wool.

Cleaning the detergent dispenser

In the event that residual detergents or additives have accumulated.

Pull out the detergent dispenser up to the end stop.

Press down the hollow on the insert and remove the detergent dispenser completely.

Pull up the insert.

Rinse the detergent dispenser under running water.

Push down the insert until it clicks into place.

Insert the detergent dispenser.

Cleaning the drain pump

Draining the washing solution

This is necessary if the washing solution can not be completely drained. The pump is blocked by either loose debris or fluff which accumulates if fluff-giving fabrics are washed at high temperature.

The water in the drum should be drained first before cleaning the drain pump. Have a suitable container ready.

！

Risk of scalding

Allow the hot washing solution to cool.

WD710 5

Turn the program selector to Off .

Fold down the cover panel.

Silve r WD712 5, Silv er WD72 25

WD710 5

Carefully remove the pump cap.But don t fully remove it and allow a little more residual water flow into the suitable container.

Remove the pump cap.

Remove any loose debris/fluff from inside the pump and clean the pump. The pump impeller must be able to rotate. Clean any residual suds or fluff from the thread of the pump cap and pump housing.

Attach and tighten the pump cap.

Attach and close the cover plate.

To avoid unused detergent from flowing into the drain during the next wash cycle:

Silve r WD712 5, Silv er WD72 25

Pour 1 litre of water into chamber II.

Select the “Drain” programme.

Cleaning water inlet strainers

This is necessary if very little or no water flows into the washing machine.

First release the water pressure in the supply hose:

Turn off the water tap.

Turn the program selector to any programme. (Except “Spin” and “Drain” )

Cleaning the strainer at the water tap

Cleaning the strainer on the washing machine

Press the Start button, and allow the programme to run for approx.40 seconds.

Disconnect the hose from the water tap.

Rinse the strainer under flowing water.

Reconnect the hose.

Disconnect the hose from the back of the washing machine.

Pull out the strainer and rinse under running water.

Insert the strainer and reconnect the hose.

Turn on the water tap and check whether water is still discharged. If water is still discharged, check that the strainer is attached properly.

Turn off the water tap.

Descaling the washing machine

Frost protection

Caution:

Descaling agents contain acids which can attack parts of the washing machine and discolour the laundry.

Provided that you use the correct amount of detergent, it is not necessary to descale the washing machine.

If, however, descaling the appliance becomes necessary, please follow the instructions provided by the descaling agent manufacturer.

If the washer-dryer is located in a room which is exposed to freezing temperatures, any residual water in both the pump and the water inlet hose must be drained immediately every time the machine is used.

Draining the pump:

See “Cleaning the pump” on page 34.

Draining the water inlet hose:

1. Turn the tap OFF.

2. Unscrew the hose from the tap and hold the end

of the hose over a container.

3. Switch ON any of the washing programmes for

approximately 40 seconds. Water left inside the inlet hose will be drained out.

4. Screw the hose back onto the tap.

Trouble Shooting Minor Faults

Risk of electric shock

Repairs must only be carried out by our Customer Service or an authorized technician.

If repaires are needed, and assuming that you cannot eliminate the fault yourself with the aid the following table:

Turn the program selector to “Off” .

Disconnect the washer-dryer from the mains.

Turn off the water tap.

Call Customer Service.

A signal emitted in display field

E:16

E:17

E:18

Possible cause Action

Door not colosed properly.

Tap not turned on.

Inlet hose kinked or pinched.

Filter blocked in water inlet hose. Water pressure too low.

Lose debris is blocking the pump.

Drainage pipe blocked.

There is too much residual water in the drum when drying

Check whether laundry is trapped in door; Close the washing machine door.

Turn the tap on.

Eliminate cause.

Clean filter, see page 36.

Eliminate cause.

Clean the pump, see page 34.

Clean the drainage pipe.

Stop the drying process, select the “ Single Spin” before drying .

Fault Possible cause Action

The loading door cannot be opened.

Detergent residue in the detergent dispenser.

The gasket is crimped.

The belt gets off the pulley.

Control lights do not come on.

The program does not start. Loading door not closed.

machine or detergent is not wash away.

Detergent in chamber I is not wash away.

Water cannot be seen in drum.

Washing solution is not completely drained.

Water is flowing out from underneath the machine.

There is water in drum.

Safety function is active. Wait for 2 minutes. Detergent was damp or

lumpy.

This may appears after installing the transport bolts.

Too much laundry is in the drum or the laundry is put in badly, and close the window with excessive force.

A fuse has triggered. Switch on/replace the fuse.

Power failure.

Plug is loose or not inserted.

“Start/Pause” button does not touched.

Water tap not turned on.Water does not enter the

“Prewash” function is not selected.

This is not a fault. The water lies below the visible part of the drum.

Loose debris is blocking the pump.

Fluff-producing laundry was washed at a high temperature. The water drainage pipe or drain hose is blocked.

The thread of the supply hose is not tight.

Leak in the drain hose.

Select Draining or Spinning .

Clean and dry the detergent dispenser(refer to Page 34)

Use the dispensing aid for liquid detergent.

Remove the transport bolts, operate the machine for a period of time, the gasket will return to the original shape.

Put in the laundry well and according to the maximum load specifiction.

Call Customer Service if this fault is repeated.

An interrupted program will be resumed when power retures. If you wish to unload the laundry, proceed as in Cleaning the drain pump , Page 34.

Check whether laundry is trapped in door.

Close the loading door(a click should be heard).

Touch the “Start/Pause” button.

Turn on water tap.

Clean the strainer (refer to Page 36)Strainer in supply hose clogged. Select “Prewash+” Cotton programme.

Clean the pump. (refer to Page 34)

Clean the water drainage pipe and/or drain hose.

Tighten the thread.

Replace the drain hose.

Fault Possible cause Action

Foam coming out of the detergent dispenser. The sign appears after the programme finished.

Repeated spinning at short intervals.

Drying programme does not start.

The program takes longer than usual.

Unsatisfactory washing result.

To much detergent. Or the detergent is not machine washable.

This is not a fault. The imbalance compensation system is attempting to balance the load through repeated spins. Drying programme not selected.

Drying time not set, or set drying time is too short.

Washer-dryer door not closed properly.

Pump is blocked.

This is not a fault. The imbalance compensation system is attempting to balance the load by distributing the laundry more evenly.

The foam detection feature has activated an additional rinsing cycle to reduce the amount of foam.

The degree of dirt was higher than supposed.

Not enough detergent.

Mix1 tablespoon of fabric softener with 1/2 litre of water and pour into chamber I of the detergent dispenser.

Reduce the amount of detergent next time.

Select the desired dying programme.

Set the reasonable drying time.

Turn on the tap.Tap not turned on. Check whether laundry is trapped in door.

Close the washer-dryer door ( click should be heard).

Clean the pump, see page 34

Wash large and small items together to reduce imbalances.

Add a more appropriate amount of detergent next time.

Select a more suitable program.

Add detergent according to the manufacturer's specifications.

Detergent residual on the laundry.

Grey residues on the laundry.

Programme duration changed during the programme sequence

Reductions in programme duration

Increases in programme duration

Some phosphate-free detergents contain water-insoluble residues that may appear as light spots on the laundry.

Dirt accumulation from ointments, fats or oils.

This is not a fault. See also explanations in the chapter programme duration from page 10.

Select “Rinse” immediately, or brush off spots when laundry is dry.

Add the maximum amount of detergent and select the highest permissible temperature next time.

Customer Service

Before calling the Customer Service, please make sure that you cannot eliminate the fault yourself.

This is because consultation provided by our technicians, even within the warranty period, will lead to costs being incurred by yourself.

If you cannot correct a problem yourself, switch off the washing machine, remove the plug from the socket, shut off the water supply and call Customer Service. When calling the Customer Service, please specify the product number (E-Nr.)of your appliance.

label

These numbers are shown on the label which can be found behind the door and also behind the washing machine.

E-Nr.

Please specify the product number and production number of your appliance, your help can prevent unnecessary travelling and the associated extra costs.

Product number

Technical data:

Rated voltage:220V~ Washing power:200W

Rated frequency:50Hz Spinning power:460W

Washing capacity:5.2kg Heating power:1800W

Spinning capacity:5.2kg Maximum power:2000W

Drying capacity:2.6Kg Maximum current:10A

Water pressure:0.1~1MPa Drying power:1500W

Water proof :1PX4

Programme table

Always foll ow the manufactu re’s care label instr uctions

Programme

Quick

Cottons

Standard

Intensive

Prewash

Individua tion

Mixed

Shoes

Dry

Gentle Dry

Delicates

Wool

Laundry up to(kg)

5.2

3.0

2.6

1.5

2.0

Default washing

temperature C

Selectable wash-

ing temperature C

cold-30

cold-90

cold-40

30 cold-30

cold-30

Detergent and fabric softener

Chamber I

Chamber II

Chamber

Additional functions

Extra Rinse

Easy Iron

Drying

Water plus

Program duration

in minutes

(approx. time)

152

----

Easy-Care

Single wash

2.6 58

3.5

cold-60

cold-30

Rinse

Spin

Drain

Default programme durations is the working time

when the programme is selected, the setting is not changed, such as washing temperature, spin setting etc. After selecting additional functions, the programme

duration will be changed accordingly, refer to page13.

= obligatory

= optional

Programme table: drying

Cottons/coloureds (cotton, linen)

Dry weight in Kg

Cupboard dry

Iron

Easy-care / synthetics

Dry weight in Kg

Acrylics

Easy-care

Times are approximate and refer to standard loads. The maximum selectable drying time is 120 minutes.

Recommend using automatic drying programme for good drying performance and saving energy.

0.5 1.0 1.5 2.6

Recommended drying time(min)

50-60

40-50

60-70 70-80 90

50-60

60-70 70-80

0.5 1.0 1.5

Recommended drying time(min)

40 50

25 25 - 30

Programme

Dry

Programme

Gentle Dry

Installation, Connection and Transport

Risk of injury

Safety information

The washing machine is heavy. Take care when lifting it.

Caution

Frozen hoses can tear/burst. Do not install the washing machine outdoors or in an area prone to frost.

Take care not to damage the washing machine. Do not hold onto protruding parts (e.g. loading door) when lifting.

In addition to the safety information listed here, the local water and electricity supplier may have special requirements.

If in any doubt, have the appliance connected by an authorized technician.

Before leaving the factory every machine is thoroughly tested under operating conditions any moisture or residual water which you may find in the machine or drainage hose are left over from this testing.

On the back of the machine:

- Water drain hose.

- Power cord.

Useful tools

The following tools are helpful:

- Wrench.

- Spirit level.

Dimensions

Installation location

a=600mm

b=560mm

c=860mm

Approx. weight=73 kg

To ensure the proper operation of the machine, please pay attention to the following when you install the machine.

The machine should be installed on the solid and flat floor, never put the machine on the soft carpet or on the wood floor. Do not installed the machine on the homemade plinth, if the installation location cannot be changed, the plinth must be improved as required, such as enlarge the size, secure with brackets. Never put the machines on the separate brackets. It is possible the machine moves a little by the factors of overloading, situation of the plinth(wet) and so on, so it will be a risk the machine falls down from the plinth after working for a period of time.

Keep the environment dry and vented.

Never put small appliance, such as microwave oven; and/or jar cooker, on the machine.

Keep the machine away from the flaming equipment, such as candle; cooking stove; liquefied gas container etc.

Never put the pressure containers on the machine.

Never put the machine over the opening of an uncovered drainage.

Removing the transport bolts

In the case of suspended wooden floors, place the machine on a water-resistant wooden board (plinth) of at least 30mm thickness which is screwed to the floor. If possible, install the machine in a corner of the room. Secure the machine’s feet with brackets (this applies particularly to tower arrangements).

Caution

The transport bolts must always be removed before using the appliance for the first time and must be retained for any subsequent transport (e.g. when moving). Use the spanner provided only if a ring spanner is unavailable.

Undo the 4 fixing bolts A and remove them.

Remove the four spacers B. They will fall to the floor when you tip the machine.

Insert cover caps C which you will find in the bag containing the documentation.

Hose and cable lengths

Left-hand connection

Right-hand connection

100cm

110cm

max.100c mmax.100c m

max.6 0cmmax.6 0cm

150cm

140cm

1 0

Water connection

Water supply

max.100c mmax.100c m

max.6 0cmmax.6 0cm

For the water connection a standard cold-water line with a minimum water pressure of 0.1MPa is required (with tap full ON, at least 8 litres of water must flow out in one minute). If the water pressure exceeds 1MPa, a pressure reducing valve must be added.

Never connect the machine to the mixer tap of a pressureless hot-water heater.

Caution! Connections are under full water pressure, check for leaks with tap turned fully ON.

The filters at the free end of the inlet hose and at the back of machine should only be removed for cleaning purposes.

G 1

Plastic connector CS code 424387

To avoid water damage, the tap must be turned OFF after using the machine.

The plastic nuts on the hose connections must only be tightened by hand.

For tight connection between washing machine and water source, you can:

1. Call Customer Service before you install the machine, get the plastic connector freely. It may connect tightly the water inlet pipe and your water tap.

2. Or you may purchase the specific water tap from customer service. It is designed by factory. It may be better connected with machine than your water tap. Note: The water tap is not free.

Water tap CS code 184611

Caution:

Do not disassemble the water inlet hose frequently, the untight connection will lead to leakage. We suggest that you use a water inlet hose specially for the washing machine.

If you need lengthen the water inlet hose together with the machine, please contact local CS center/ station or leader to buy additional lengthening hose.

Additional lengthening water inlet hose is not free.

Water Drainage

Aligning the washing machine

Caution

Do not bend or pull the water drainage hose.

Height between the placement area and drainage point: maximum 100cm

Drainage into a wash basin( The hose elbow is in the drum).

Caution

The plug must not block the drain of the wash basin.

Secure the water drainage hose so that it does not slide out.

When water is being drained, check that the water flow is fast enough.

Align the washing machine with the aid of the four height-adjustable feet and a spirit level.

Loosen lock nut 1 in a clockwise direction with a spanner.

Adjust the height by rotating height-adjustable foot 2.

Tighten lock nut 1 against the housing; grip the foot and do not adjust the height.

All four appliance feet must be situated firmly on the ground. The washing machine must not wobble. The lock nuts on all four appliance feet must be tightened against the housing.

Attention

Loud noises, vibrations and “wandering” may be due to incorrect alignment!

Electrical connection

When heating, the maximum current of the washing machine is 10A, so please make suer that the power supply system (voltage, current and cable) is applicable to the load of the applied appliance.

The machine must only be connect to an alternating current supply via a correctly installed earthed socket.

The voltage indicated on the rating plate at the back of the machine must match the mains voltage at the installation location.

Connected load and required fuse or line protecting cut-out are indicated on the rating plate.

It must be ensured that the plug and socket match, that the conductor cross-section is sufficient and that the earthing system has been installed in compliance with regulations.

Multiple plug connectors and extension cables must not be used.

Do not connect the machine to electrical outlets while your hands are wet or damp.

To remove the plug from the socket, grasp the plug firmly and pull it out. Do not pull at the cable.

If the supply cord is damaged, it will be replaced by a special cord or a assembly available from the manufacturer or its service agent.

In the event that an earth-leakage circuit breaker is to be used, only use types marked with the following symbol: . Only this symbol can guarantee compliance with all current regulations.

Transport e.g. when moving

Before transporting the washing machine:

Turn off the water tap,

Drain any residual washing solution (refer to Page 34),

Release the water pressure in the supply hose (refer to Page 36),

Disconnect the washing machine from the mains,

Dismantle the supply and drainage hose,

Install the transport bolts.

Having transported the appliance and ensured proper installation and connection, allow the “Drain” programme to run through before starting the first washing programme.

Preparing and inserting the transport bolts

Remove the covers C.

Remove the back panel D (see Page 44), preparing the transit bolt.

Insert and tighten the bolts.

本资料如有更改，恕不另行通知。

Contents of this brochure could be changed without written notice.

Product standard:

GB 4706.1-1998 GB 4706.24-2000 GB 4706.26-2000 GB 17625.1-2003 GB 19606 -2004 GB 4343.1 -2003 GB/T 4288-2003 GB 12021.4-2004 GB 4706.20-2004

WD 7105 (XQG52-7105)

Silver 7125 (XQG52-7125) Silver 7225 (XQG52-7125) Silver 7025 (XQG52-7025)

零件号： 9000156318 版次： 01 修订日期：2006年08月

Siemens WD7125, WD 7105, WD7025, WD7225 Operating Instructions

Specifications and Main Features

Frequently Asked Questions

User Manual

Page 26