Page 1
Hazardous Voltage.
Hazardous Voltage.
Will cause death or serious injury.
Will cause death or serious injury.
Turn off and lock out all power supplying this device before
Turn off and lock out all power supplying this device before
working on this device.
working on this device.
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
turned on.
turned on.
VBFS365
VBNFS365
VBFS366
VBNFS366
VBLK4
Tensión peligrosa.
Tensión peligrosa.
Puedecausarla muerteo lesionesgraves.
Puedecausarla muerteo lesionesgraves.
Desenerg icetotalmente antes d e ins t al ar o darle servici o.
Desenerg ice tot al m ent e ant es d e inst alar o darle s ervi c io.
Reemplacetodas las barreras y cubiertas antes de
Reemplace todas las barreras y cubiertas antes de
energizarel interruptor.
energizarel interruptor.
Panel Mount Assembly
Linkage Kit
Tension dangereuse.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Danger de mort ou risque de blessures graves.
Couperl'alimentationde l'appareil et barreravant de
Couperl'alimentationde l'appareil et barreravant de
travailler.
travailler.
Remplaceztouts les couvertsavant que
Remplaceztouts les couvertsavant que
l'approvisionnementde pouvoirsoitalimenté.
l'approvisionnementde pouvoir soit alimenté.
QTYIndexComponentCatalog Numbers
1A1Linebase ( factory installed )
1A2Loadbase ( factory installed - Fused Only )
1A3Mechanism ( factory installed )
1A4Mounting Pan ( line base )
1A5Mounting Pan ( load base – Fused Only )
1A6Support Bracket ( 600 amp Only, factory installed )
1
4 (8)
A7Screw, 1/4-20 x 1/2 (not shown)
1A8Threaded Rod
1
4 (8)
A9Lock Washer, 1/4 (not shown)
1
A10Flat Washer, 1/4 (not shown)
4 (8)
QTYIndexComponentCatalog Numbers
1B1Driver Plate (required for 400 amp only)
1B2Threaded Rod
2B3E-Ring, 1/4” (required for 400 amp, VBH2 kit only)
1B4Flat Washer, 1/4” (required for 400 amp only)
1B5Retaining ring, type PO (required for 400 amp only)
VBH2R
VBH24X
1
Quantity of mounting screws, ( ), for fused switches only.
Handle Kit
QTYIndexComponentCatalog Numbers
1C1Handle
1C2Handle Support Bracket
1C3Door Catch
1C4Door Catch Bracket
1C5Interlock Lever Extension
6C6Screw, 1/4-20 x 1/2, thread forming
2C7Screw, 1/4-20 x 3/4, machine
2C8Flat Washer, 1/4
4C9Lock Washer, 1/4
2C10Nut, 1/4-20
2C11Lock Washer, 5/16
1C12Gasket (required for Type 3R/12/4X)
4C13Screw, #8-32 x 5/16
4C14Lock Washer, #8
2C15Screw, 5/16-18 x 3/4
1C16Gasket (required for Type 3R/12/4X)
4C17Sealing Washer, 1/4 (required for Type 3R/12/4X)
2 / 17 I.L. No. 500524F00
Page 2
Panel Mounted Assembly
(VBFS366 Shown)
Linkage Kit
Handle Assembly
3 / 17 I.L. No. 500524F00
Loading...