Data sheet 5SV3111-6
4
RES.CUR.OP.CIRCUIT BREAKER TYPE A 16A 1+N-
POLE 10MA 230V 2MW
Model
product brand name SENTRON
Product designation RCCB
Design of the product Instantaneous
General technical data
Number of poles 2
Size of installation devices / acc. to DIN 43880 1
Protection against electrical shock Finger and back-of-hand safe
Short-circuit current rating kA 10
circuit-breaker / Design 5SV3
Mechanical service life (switching cycles) / typical 10000
Overvoltage category III
Supply voltage
Supply voltage
● with AC / Rated value
● for testing equipment / minimum
V 230
V 195
Protection class
Protection class IP IP20, if the distribution board is installed, with
connected conductors
Switching capacity
Switching capacity current
● acc. to EN 60898 / Rated value
kA 0.5
Dissipation
5SV3111-6 Changes preserved
Page 1/
20.05.2015 © Copyright Siemens AG
Active power loss
4
● for rated value of the current / with AC / in hot
operating state / per pole
W 0.7
Electricity
Tripping residual current / Rated value mA 10
rated current In / IEC, DIN/VDE / at 40 Cel A 16
Type of fault current A
Current / with AC / Rated value A 16
Surge current resistance / Rated value kA 1
Product details
Product property
● halogen-free
● silicon-free
Product expansion / can be installed / supplementary
devices
Number
Number of test cycles / for environmental testing /
acc. to IEC 60068-2-30
Yes
Yes
Yes
28
Connections
Connectable conductor cross-section / stranded
● minimum
● maximum
Connectable conductor cross-section / solid
● minimum
● maximum
Tightening torque / with screw-type terminals
● minimum
● maximum
Position / of power supply cord top or bottom
mm² 0.75
mm² 35
mm² 0.75
mm² 35
N·m 2.5
N·m 3
Mechanical Design
Height mm 90
Width mm 36
Depth mm 70
mounting position any
Installation depth mm 70
Number of width units 2
Mounting type DIN rail (REG)
Net weight g 217
Environmental conditions
Ambient temperature
● minimum
5SV3111-6 Changes preserved
Page 2/
°C -25
20.05.2015 © Copyright Siemens AG