|
|
|
|
fелн~дд~нбзе=белнкмЕнбзел |
Éå |
||
`fOQomKK
`fPMomKK cfNUkmKK cfOQamKK `fOQtmKK
Table of Contents |
|
Important Information . . . . . . . . . . . . . . . . . . |
3 |
Installation Possibilities . . . . . . . . . . . . . . . . |
4 |
Stand alone appliance . . . . . . . . . . . . . . . . . . . . . . . |
4 |
Side by side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
4 |
Stand alone appliance with dividing wall . . . . . . . . |
4 |
As an end section to a row of kitchen units . . . . . . |
4 |
Installing the Appliance . . . . . . . . . . . . . . . . |
5 |
Installation location . . . . . . . . . . . . . . . . . . . . . . . . . . |
5 |
Atmosphere grades . . . . . . . . . . . . . . . . . . . . . . . . . |
5 |
Installation niche . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
5 |
Neighbouring kitchen furniture . . . . . . . . . . . . . . . . |
5 |
Subsurface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
5 |
Electrical Connection . . . . . . . . . . . . . . . . . . |
6 |
Water Connection . . . . . . . . . . . . . . . . . . . . . |
6 |
Dimensions of the Installation Niche . . . . . |
7 |
Setting up as an stand alone appliance . . . . . . . . . |
7 |
Setting up side by side . . . . . . . . . . . . . . . . . . . . . . |
8 |
Site of the water connection . . . . . . . . . . . . . . . . . . |
9 |
Dimensions of the Appliance . . . . . . . . . . . . |
10 |
45.7 cm appliances - freezer appliances |
|
with/without water dispensing . . . . . . . . . . . . . . . . . |
10 |
45.7 cm appliances - wine storage compartment |
11 |
61 cm appliances - refrigerated |
|
and freezer appliances with/without ice |
|
and water dispenser . . . . . . . . . . . . . . . . . . . . . . . . . |
12 |
61 cm appliances - wine storage compartment . . |
13 |
76.2 cm appliances - refrigerated |
|
and freezer appliances . . . . . . . . . . . . . . . . . . . . . . . |
14 |
Tools and Accessories which |
|
are needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
15 |
Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . |
15 |
Additional accessories . . . . . . . . . . . . . . . . . . . . . . . |
15 |
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
15 |
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
15 |
Mounting Instructions . . . . . . . . . . . . . . . . . . |
16 |
|
1. |
Checking the installation niche . . . . . . . . . . . . |
16 |
2. |
Transporting the appliance . . . . . . . . . . . . . . . |
16 |
3. |
Removing the packaging . . . . . . . . . . . . . . . . . |
17 |
4. |
Preparing the appliance . . . . . . . . . . . . . . . . . . |
17 |
5. |
Exchanging the door stops . . . . . . . . . . . . . . . |
18 |
6. |
Preparing the installation niche . . . . . . . . . . . . |
20 |
7. |
Attaching an additional anti tilt mechanism . . |
21 |
8. |
Preparing the water connection . . . . . . . . . . . |
22 |
9. |
Attaching the edge protectors . . . . . . . . . . . . . |
22 |
10. |
Setting up side by side . . . . . . . . . . . . . . . . . . |
22 |
11. |
Sliding the appliance into |
|
|
the installation niche . . . . . . . . . . . . . . . . . . . . . |
23 |
12. |
Adjusting the appliance in the niche . . . . . . . . |
24 |
13. |
Fixing the appliance to the niche ceiling . . . . . |
25 |
14. |
Fastening the appliance to the side wall |
|
|
of the installation niche . . . . . . . . . . . . . . . . . . . |
25 |
15. |
Connecting water to the appliance . . . . . . . . . |
26 |
16. |
Attaching the base strip . . . . . . . . . . . . . . . . . . |
26 |
17. |
Switching the appliance on for the first time . |
27 |
18. |
Preparing the furniture doors . . . . . . . . . . . . . . |
28 |
19. |
Loading the appliance door . . . . . . . . . . . . . . . |
29 |
20. |
Attaching adjusting ribs to the furniture door . |
29 |
21. |
Putting the furniture door on its hinges |
|
|
and adjusting it . . . . . . . . . . . . . . . . . . . . . . . . . |
30 |
22. |
Fastening the furniture door . . . . . . . . . . . . . . . |
31 |
23. |
Shortening the finger protection . . . . . . . . . . . |
33 |
24. |
Fitting the finger protection . . . . . . . . . . . . . . . |
33 |
25. |
Attaching the covers . . . . . . . . . . . . . . . . . . . . . |
34 |
26. |
Adjusting the ice and water dispenser . . . . . . |
35 |
27. |
Attaching covering strips . . . . . . . . . . . . . . . . . |
36 |
28. |
Mounting the air filter . . . . . . . . . . . . . . . . . . . . |
37 |
29. |
Setting the door opening angle . . . . . . . . . . . . |
38 |
30. |
Tightening the hinges . . . . . . . . . . . . . . . . . . . . |
38 |
2
Important Information
! 6Warning!
The appliances are very heavy and must be secured from tipping when transporting, when mounting and when operating. It is absolutely necessary to fit an anti,tip device.
Keep the doors closed until the appliance has been mounted completely and secured according to the instructions in these mounting instructions.
Because of the weight / dimensions of the appliance and to minimise the risk of injuries and damage to the appliance at least two persons are necessary to setup the appliance securely.
! 6Caution!
Setting up and mounting this appliance requires extensive expertise in various trades (mechanics, carpentry, plumbing, electrics).
It is the duty of the person setting the appliance up to guarantee that it is set up and commissioned securely.
Mistakes in setting the appliance up and damage resulting from this do not come under the warranty of the manufacturer. Terms of guarantee are found in the operating instructions of the appliances.
! 6Warning!
Use the appliances according to the prescribed application.
Pull out the plug or remove the fuse before commencing work on the appliance.
Only allow a specialist electrician to exchange a mains lead.
Only allow customer service to carry out repairs to the appliance.
Apart from statutory national regulations, you should stick to the connection terms relating to the local electricity and water companies.
Apart from statutory national regulations, you should stick to the connection terms relating to the local electricity and water companies.
These mounting instructions are designed to help you install your new appliance. The manufacturer cannot be held liable for mounting which has been improperly carried out. We recommend that you allow a qualified specialist to set up and switch the appliance on for the first time.
Following all information and keeping to the instructions are preconditions for mounting and switching the appliance on safely for the first time.
Keep the mounting instructions safe for use later on.
Before setting up and switching the appliance on for the first time, read the mounting instructions fully and thoroughly.
3
Installation Possibilities
There are various set up options.
These are only limited by the kitchen design and the finger protection function.
Stand alone appliance
Side,by,side
* it is necessary to have a dividing wall!
If two appliances are set up next to each other, a sealing kit for side by side combination should be used in order to guarantee a stable connection.
Further information concerning this can be found in the section •Additional accessories" on page 15.
Stand alone appliance with dividing wall
1. |
2. |
3. |
4. |
Note:
-When measuring the dividing wall for model 4,
pay attention to the thickness of the furniture front to be mounted in order to avoid damage when opening doors at the same time.
-If the distance between the appliances is less than 160 mm, the heating kit for the side,by,side combination should be used.
Further information concerning this can be found in the section •Additional accessories" on page 15.
-The minimum thickness of the dividing walls is 16 mm.
As an end section to a row of kitchen units
If a side of the appliance is visible, use a side covering.
The side covering must be connected firmly to the wall, the floor and the upper cupboards before the appliance is slid into the installation niche.
The dimensions of the side covering are governed by the opposing niche wall. During installation, make sure that the installation niche has right angles and has the exact size necessary for the appliance.
4
Installing the Appliance
Installation location
The appliance should be installed in a dry, well ventilated space.
The location should not be exposed to the direct sunlight and should not lie next to a source of heat such as a cooker or a radiator etc. If installation next to a source of heat cannot be avoided, either a suitable insulating plate should be used or you should keep to the following minimum distances:
-30 mm from the electric cooker,
-300 mm from a oil fired or solid fuel cooker.
The appliance is very heavy. Data relating to the weight when empty is found in the following table:
Appliance |
Weight (empty) |
|
|
Refrigerator 61.0 cm (24") |
approx. 131 kg |
|
|
Refrigerator 76.2 cm (30") |
approx. 145 kg |
|
|
Freezer 45.7 cm (18") |
approx. 109 kg* |
|
|
Freezer 61.0 cm (24") |
approx. 131 kg* |
|
|
Freezer 76.2 cm (30") |
approx. 145 kg* |
|
|
Wine storage cabinet 45.7 cm (18") |
approx. 109 kg |
|
|
Wine storage cabinet 61.0 cm (24") |
approx. 131 kg |
|
|
* without water and ice dispenser |
|
Atmosphere grades |
|
The atmosphere grade is written on the identification plate. It states the room temperature within which the appliance can be operated.
Atmosphere grade |
|
Permitted room temperature |
|
|
|
SN |
|
+10 °C to 32 °C |
|
|
|
N |
|
+16 °C to 32 °C |
|
|
|
ST |
|
+18 °C to 38 °C |
|
|
|
T |
|
+18 °C to 43 °C |
|
|
|
Installation niche
It is important to keep to the stated dimensions of the installation niche with a view to trouble free fitting, and the subsequent appearance of the kitchen furniture frontage. Special care should be taken that the niche has right angles.
The side walls should not exhibit areas that stick out, projections or unevenness.
You should determine the right angles of the installation niche with appropriate means, e.g. by measuring diagonally and by using a spirit level.
The side walls and the upper end of the installation niche must be at least 16 mm thick.
Neighbouring kitchen furniture
The new appliance is screwed down tightly using parts of the cabinet and the upper cabinet.
Care should therefore be taken, that all upper cabinets to which something has been fastened are securely connected to the subsurface or wall by appropriate means.
The minimum thickness of the base should be a minimum of 19 mm.
Subsurface
! 6Warning!
A fully laden appliance is heavy, data relating to the weight when empty is found in the following table.
Appliance |
Weight (laden) |
|
|
Refrigerator 61.0 cm (24") |
approx. 400 kg |
|
|
Refrigerator 76.2 cm (30") |
approx. 500 kg |
|
|
Freezer 45.7 cm (18") |
approx. 250 kg* |
|
|
Freezer 61.0 cm (24") |
approx. 350 kg* |
|
|
Freezer 76.2 cm (30") |
approx. 425 kg* |
|
|
Wine storage cabinet 45.7 cm (18") |
approx. 245 kg |
|
|
Wine storage cabinet 61.0 cm (24") |
approx. 310 kg |
|
|
* without water and ice dispenser |
|
5
The subsurface must be level and even in order to ensure that the appliance is securely installed and works correctly.
The subsurface must be made from a hard, non flexible material.
The floor of the installation space must have the same height as the rest of the space.
On account of the weight of a fully laden appliance, it is necessary to have a bearing subsurface. In the case of doubt, the help of architect or specialist builder should be enlisted.
Electrical Connection
Do not use an extension lead or a multi plug socket. Connecting this appliance, only use a plug which has been installed securely.
The plug to secure the appliance must be freely accessible. Connect the appliance to a 220-240 V/50 Hz ac current via a plug which has been properly installed. The plug must be fitted with a 10 A fuse or higher.
For appliances operated in non,European countries, the identification plate should be checked whether the electric supply and the current model stated match the vales of the mains supply. For details regarding the position of the identification plate, see section •Calling Customer Service / Identification Plate". Any necessary exchanging of the mains lead should carried out by a specialist electrician.
! 6Warning!
On no account should the appliance be connected to electric saving plugs or to converters which convert dc current to 230 V ac e.g. solar appliances, marine current mains networks.
Water Connection
A cold water connection is necessary for operating the automatic ice maker. The water pressure must lie between 1.7 and 10 bar. The installation must correspond to the local plumbing regulations.
A separate shut off valve should be installed in the cold water inflow.
The shut off valve should not be located behind the appliance. It is recommended that you mount the shut off valve directly next to the appliance or at another place which is easily accessible.
When installing the water connection, pay attention to the permissible installation area for the water mains. For more information concerning the permissible installation areas, see the section •Installation Dimensions".
Note:
The maximum outside diameter of the water mains (without connecting pieces) is 10 mm.
6
Dimensions of the Installation
Niche
Setting,up as an stand alone appliance
Important!
The upper niche wall must consist of a rigid, load bearing material (minimum thickness 16 mm). The upper niche wall must be completely even up to a depth of at least 100 mm and free from bumps.
Important!
The lateral niche walls must be completely even and free from bumps. If the niche is formed as a separate part, the side walls must be completely even up to a depth of at least 100 mm and free from bumps.
Appliance width |
X |
Y |
|
|
|
457 mm |
457 mm |
228 mm |
|
|
|
610 mm |
610 mm |
305 mm |
|
|
|
762 mm |
762 mm |
381 mm |
|
|
|
Key:
AArea for installation of the water connection
The shut off valve for the appliance's water connection is to be located in the immediate vicinity of the installation niche such that it is accessible without disassembling the appliance.
If this is absolutely unavoidable, the shut off valve should be only be installed in the area of the installation areas labelled with A and B behind the appliance.
BArea for installation of the electric current
DDepth of the installation niche, depending on the kitchen design (see DESIGN GUIDE)
D = 610 mm minimum!
Note:
The installation niche must have right angles.
The side walls should not exhibit areas that stick out, projections or unevenness.
7
Setting,up side,by,side
The dimensions stated for the respective appliance also apply for the installation of two appliances next to each other.
The overall width of the niche is made up by adding the niche widths necessary for the individual appliances.
Example:
Freezer 45.7cm wide / Refrigerator 76.2 cm wide
Important!
The upper niche wall must consist of a rigid, load bearing material (minimum thickness 16 mm). The upper niche wall must be completely even up to a depth of at least 100 mm and free from bumps.
Important!
The lateral niche walls must be completely even and free from bumps. If the niche is formed as a separate part, the side walls must be completely even up to a depth of at least 100 mm and free from bumps.
Key:
AArea for installation of the water connection
The shut off valve for the appliance's water connection is to be located in the immediate vicinity of the installation niche such that it is accessible without disassembling the appliance.
If this is absolutely unavoidable, the shut off valve should be only be installed in the area of the installation areas labelled with A and B behind the appliance.
BArea for installation of the electric current
DDepth of the installation niche, depending on the kitchen design (see DESIGN GUIDE)
D = 610 mm minimum!
Note:
The installation niche must have right angles. The side walls should not exhibit areas that stick out, projections or unevenness.
8
Site of the water connection
The mains supply can be laid to the appliance from the right hand side (a), from the left hand side (b) or from the space below the appliance (c).
Key: |
B Area for installation of the electric current |
AArea for installation of the water connection
9
Dimensions of the Appliance
45.7 cm appliances - freezer appliances with/without water dispensing
Key:
An example is shown with a continuous furniture frontage
a)The adjustment range of the appliance feet is +35 mm / -13 mm.
b)Dimensions can vary.
c)The thickness of the door covering can vary.
d)This dimension can vary, depending on installation, thickness of the furniture door to be mounted and the neighbouring kitchen furniture.
e)Dimensions of the appliance
f)Dimensions of the furniture door
10
45.7 cm appliances - wine storage compartment
Key:
An example is shown with a continuous furniture frontage
a)The adjustment range of the appliance feet is +35 mm / -13 mm.
b)Dimensions can vary.
c)The thickness of the door covering can vary.
d)This dimension can vary, depending on installation, thickness of the furniture door to be mounted and the neighbouring kitchen furniture.
e)Dimensions of the appliance
f)Dimensions of the furniture door
11
61 cm appliances - refrigerated and freezer appliances with/without ice and water dispenser
Key:
An example is shown with a continuous furniture frontage.
a)The adjustment range of the appliance feet is +35 mm / -13 mm.
b)Dimensions can vary.
c)The thickness of the door covering can vary.
d)This dimension can vary, depending on installation, thickness of the furniture door to be mounted and the neighbouring kitchen furniture.
e)Dimensions of the appliance
f)Dimensions of the furniture door
12
Loading...