Siemens FDT181C,FDB181C Product Manual

Building Technologies

Fire safety and security products

FDT181C Collective Heat Detector
Product Manual

Overview

The heat detector FDT181C is a collective detector. It is used for fire detection inside a
building.

Characteristics

– Operation modes: A2 (Rate-of-rise and fixed temperature)
– Collective detector, no address setting, polarity free connection
– 360° visible alarm indicator
– Resistant to environment and interference factors such as humidity, corrosive and

vibration, with immunity against electro-magnetic interference.

Application

– Communication with FC18 controller via FDCI183 transponder, each FDCI183 can

connect max. 32 collective detectors.

– Communication with BC80 controller via BDS161 transponder, each BDS161 can

connect max. 10 collective detectors.

2

Building Technologies

A6V10361100_b_en_--

Fire safety and security products 07.2012

Indicator

The detector is provided with an internal alarm indicator to show its operating status.

Status

Indicator

Normal

Off

Alarm

Steady on

Installation

 Easy and time-saving mounting

Install the base and finish the wiring during the construction phase.

1. Insert detector into base and turn it clockwisely until positioning pointer on base

align with positioning pointer on detector.(see below)

Uninstallation:

1. Turn it counterclockwisely and pull the detector out of base.

After all the construction is finished, the dust cap must be taken away!
No painting!

Dimensions

In：mm（with base）

Detector

Positioning pointer

Base

Positioning pointer