Page 1
siemens-home.com/welcome
de Gebrauchsanleitung
en Instruction manual
fr Mode d’emploi
nl Gebruiksaanwijzing
Register
your
product
online
Page 2
en
Contents
Safety instructions ....................................34
Overview...................................................36
Controls ....................................................37
Initial use ..................................................38
Display ......................................................39
Preparing drinks .......................................40
Preparation using coffee beans ................42
Preparation using milk ..............................43
Preparation using ground coffee ..............44
Dispensing hot water ................................44
Personalised drinks ..................................45
Two cups at once......................................46
Adjusting the grind setting ........................ 46
Childproof lock ..........................................46
Menu.........................................................47
Care and daily cleaning ............................49
Service programmes ................................53
Tips on energy saving ..............................56
Frost protection.........................................56
Storing accessories ..................................56
Accessories ..............................................56
Disposal ....................................................57
Guarantee.................................................57
............................57
Simple troubleshooting .............................58
Included in delivery
(Figure A on the fold-out pages)
Fully automatic coffee machine
Instruction manual
Filter instructions
Installation instructions
Connecting cable
Assembly bracket
Spacer
5 fastening screws (silver)
2 fastening screws (long/black)
2 fastening screws (short/black)
1 sleeve (black)
2 sleeves (white)
Quick reference guide
Measuring spoon
Water hardness testing strip
Milk tube (set)
Milk container
Suction pipe
32
Page 3
Congratulations ...
en
... on purchasing this fully automatic coffee
machine! You have now acquired a highquality and modern kitchen appliance. It
combines innovative technology with a
range of functions and is easy to use. It will
enable you to prepare a variety of delicious
hot drinks quickly and simply – whether
you’re in the mood for an invigorating
espresso, a creamy cappuccino, a smooth
latte macchiato or white coffee, or a traditional cup of coffee. At the same time the
appliance offers you a wide range of options
for adapting it to your individual taste.
To ensure that you can use this fully
automatic coffee machine with all its functions and features reliably and safely, we
would like you to familiarize yourself with
its components, functions, displays and
controls. These instructions are designed
to help you. So please take the time to read
them before you switch on the appliance.
How to use these instructions
You can open up the front cover of this
illustrations of the appliance with each part
numbered. These numbers will be referred
to throughout the text.
Example: brewing unit (15)
These instructions also show display texts
and symbols in a special way. These enable
you to clearly see where we refer to texts
or symbols that are marked or displayed on
the appliance.
Display indicators:
“Espresso”
Buttons and controls on the display:
The appliance comes with a quick reference
tant functions at a glance. It can be stored
in the accessory drawer of the appliance.
33
Page 4
en
Safety instructions
Please read and follow the operating instructions carefully and
keep them for later reference. Enclose these instructions when
you give this appliance to someone else.
This appliance is designed for the preparation of normal
household quantities in the home, or in household-like,
non-commercial environments. Household-like environments
small businesses or for use by guests at bed-and-breakfast
establishments, small hotels and similar residential facilities.
Danger of electric shock!
Connect and operate the appliance only according to the type plate
carried out by our customer service personnel. If the supply cord
is damaged, it must be replaced by a special cord or assembly
available from the manufacturer or its service agent.
This appliance can be used by children aged from 8 years and
above and by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a
safe way and if they understand the hazards involved. Keep children
under 8 years of age away from the appliance and connecting
cable and do not allow them to use the appliance. Children shall
not play with the appliance. Cleaning and user maintenance shall
not be made by children unless they are older than 8 years and
supervised.
Never immerse the appliance or mains cable in water. Use only if
power cord and appliance show no signs of damage. Should a fault
occur, pull the plug or disconnect from the mains immediately.
34
Page 5
en
electronic implants such as pacemakers or insulin pumps. Persons
with electronic implants should keep a minimum of 10 cm away from
the front of the appliance.
Risk of suffocation!
Do not allow children to play with packaging material. Store small
parts safely as they can be easily swallowed.
Risk of injury!
Do not reach into the grinding unit.
Risk of burns!
The beverage outlet gets very hot.
35
Page 6
en
Overview
(Figures B to E on the fold-out pages)
1 Appliance door
a)
b) Drip tray
2 Display
3 Controls
4 Outlet system (coffee, milk, hot water),
height-adjustable
a) Cover
5 Milk system
a) Snap lever
b) Beverage outlet (upper part,
lower part)
c) Milk tube (2 pieces)
d) Connecting element, metal
(for magnet holder)
6 Mains switch (power supply)
7 Accessory drawer
(for quick reference guide and
accessories)
a) Quick reference guide
b) Measuring spoon
c) Water hardness strip
d)
8
a) Lid for water tank
9
a) Lid for bean container
10 Slide regulator for
grinding degree setting
11 Magnet holder for (connecting element)
12
(for ground coffee/cleaning tablet)
13 Holder (for milk tube)
14 Protective cover (for brewing unit)
15 Brewing unit
a) Locking mechanism
b) Cover
16 Eject lever
17 Drip tray
a) Coffee grounds container
18 Collecting tray
19 Holder (for suction pipe)
a) Suction pipe
20
21 Storage shelf with sensor
(for milk container)
22 Milk container
a) Stainless steel container
b) Lower part of the lid
c) Upper part of the lid
Further information about the appliance, such as how to change the
opening angle of the door, can be
found in the assembly instructions.
36
Page 7
en
Controls
The appliance features user-friendly menu
navigation to ensure that operation is as
easy as possible while at the same time
offering a wide range of functions. That
means a range of options can be selected
with just a few operating steps.
Mains switch
Use the mains switch (to do so open
the door) to switch on the appliance, or to
switch it off fully (power supply off).
Important: Do not press the mains
switch while the appliance is in use.
Switch off the appliance only when
it is in energy saving mode, so that it
can rinse automatically.
Button
Press button to switch on
the appliance or change it to energy
saving mode. The appliance is rinsed
automatically.
The appliance does not rinse if:
if it is still warm when switched on, or
if no coffee was dispensed before it was
switched off.
The appliance is ready for use as soon as
the symbols for the drinks selection appear
on the display.
Button
Press button to open the selection
of “Personalised beverage preparation”.
Personal settings for coffee drinks can
be saved and called up (see the section
“Personalised drinks”).
Button
Press button after selecting a drink to
prepare two cups simultaneously (see the
section “Two cups at once”).
Press , ,
or again to exit the respective
menu.
Button
Press to either begin preparing
a drink or launch a service programme.
Press again while the drink
is being prepared to prematurely halt
dispensing.
Rotary selector
Turn the rotary selector to navigate in the
display or to change parameters.
Display (Touchscreen)
Information is shown on the display, or
settings can be made by touching the
touchscreen (see the section “Display”).
Button
Press button to open the menu.
Settings can be made and information
called up (see the section “Menu”).
Button
Press button to open the selection
programme as described in the section
“Service programmes”.
37
Page 8
en
Initial use
General
Fill the appropriate container using only
pure, cold, uncarbonated water and solely
roasted beans (preferably espresso or
coffee bean blends for fully automatic coffee
machines). Do not use coffee beans that
have been glazed, caramelised or treated
with other additives containing sugar, since
they will block the brewing unit.
Before the appliance can be
switched on and used, it must
be assembled and connected
according to the enclosed assembly
instructions.
Setting up the appliance
Important: Only use the appliance
in a frost-free room. If it has been
transported or stored at temperatures below 0°C, wait at least 3 hours
before initial use.
Take hold of the appliance door by the
recessed grip and open.
with fresh water up to the “max” mark.
place.
coffee beans and replace.
Set the mains switch to I and close the
appliance door.
The appliance heats up and is rinsed.
The display is activated.
“Select language” appears.
Turn the rotary selector to select the
desired language and touch [ Continue ]
in the display.
“Set water hardness” appears.
It is important to set the water hardness correctly to enable the appli-
ance to accurately indicate when the
descaling programme should be run.
The preset water hardness is level 4.
If a water softener is installed in the
house, please set the water hardness to level 3. You can also check
the water hardness by asking your
local water supplier.
Use the enclosed test strip to determine
strip in water and check the result after
one minute.
Level Water hardness
German (°dH) French (°fH)
1
2
3
4
Turn the rotary selector to set the water
hardness determined.
Touch [ Continue ]. “Complete set-up?”
appears.
Touch [ Apply ]. The settings are saved.
The appliance is ready to use when the
drink symbols are shown on the display.
The integrated fan switches on each time
a drink is dispensed and switches off again
after a few minutes.
after running a service program, or if it has
beverage will not have the full aroma and
should not be consumed.
When the fully automatic coffee machine
1-7
8-14
15-21
22-30
1-13
14-25
26-38
39-54
38
cups have been dispensed.
Page 9
en
40 ml
Switch off appliance
Press the button.
The appliance rinses and switches to
energy saving mode.
Exception: If only hot water is dispensed,
the appliance switches off without rinsing .
To switch the appliance off completely,
open the appliance door and set the
mains switch to .
Important: Do not press the mains
switch while the appliance is in use.
Switch off the appliance only when
it is in energy saving mode, so it can
rinse automatically.
The factory settings of the fully
automatic coffee machine are
programmed for optimal performance. The appliances switches
automatically to the energy saving
rinses (duration can be set, see
“Switch off after” in the section
“Menu”).
Display
Information is shown on the display, or
settings can be made by touching the
touchscreen.
Display
The display shows the selected drinks,
settings and setting options, as well as
messages about the appliance’s operating
status.
Examples:
Drink selection
Information
Information disappears after pressing the
button or after a short time.
Water tank almost empty
Espresso
Adjust
The appliance is equipped with a
sensor. If there is a milk container,
this will be correspondingly shown
on the display when switching to the
energy saving mode. If there is milk
in the container, please keep in the
fridge.
Instead of text, a small symbol appears in
the lower left area of the display.
Bean container almost empty
Water tank almost empty
Cleaning programme required
Descaling programme required
calc’nClean programme required
39
Page 10
en
40 ml
Prompts to take action
Fill water tank
If the action required was carried
out, e.g. filling the water tank, the
corresponding message and symbol
will disappear.
Operation
Touch texts or symbols combined with
turning the rotary selector to navigate within
the display (for an example, see section
“Drink adjustment”).
An audible signal is heard when touching
the display. These audible signals can be
switched on or off (see the section “Menu –
Key tones”).
Preparing drinks
This fully automatic coffee machine can
be operated using coffee beans or ground
coffee (but not instant coffee).
If using coffee beans, they will be freshly
ground for each brewing. Preferably use
espresso or coffee beans for fully automatic
machines. For optimum quality, deep-freeze
the beans or store in a cool place in sealed
containers. Deep-frozen coffee beans can
also be ground.
Important: Fill the water tank with
fresh, uncarbonated, cold water
every day. The tank should always
contain sufficient water for operating
the appliance.
Tip: Cups should be prewarmed,
e.g. with hot water. This applies
particularly to small thick-walled
espresso cups.
For some settings, coffee is
prepared in two stages (see the
section “aromaDouble Shot” and
“Two cups at once”). Please wait until
the process is completely finished.
Drink selection
Turn the rotary selector to select different
drinks:
The symbol for the drink selected is shown
in the middle. The name of the drink and
the values currently set, e.g. for the strength
and volume are shown in upper row.
Espresso
Adjust
40
Page 11
en
120 ml
The following drinks can be selected:
Ristretto
Espresso
Espresso Macchiato
Coffee
Cappuccino
Latte Macchiato
Caffe Latte
Milk froth
Warm milk
Hot water
The drink selected can be directly prepared
individual taste.
Drink adjustment
Touch [ Adjust ] on the display and different
for adjustment.
has a dark background.
normal Back
Turn the rotary selector to set the
required amount of coffee, e.g. “160 ml”.
.
normal Back
Turn the rotary selector to set the desired
temperature, e.g. “high”.
Coffee
Coffee
Coffee
120 ml
160 ml
An example:
The values for a cup of coffee can be
changed as follows:
Use the rotary selector to select “Coffee”.
Touch [ Adjust ].
dark background.
Coffee
Coffee
Adjust
has a
120 ml
high Back
Save the settings by touching [ Back ] or
by starting to dispense the drink.
There are different setting options
depending on the type of drink.
For coffee drinks, for example, the
strength, temperature and quantity
can be set, for milk only the volume.
160 ml
normal Back
Turn the rotary selector to set the strength
of coffee desired, e.g. “” (strong).
41
Page 12
en
160 ml
The following settings are possible:
Coffee strength
Very mild
Mild
Strong
Very strong
aromaDouble Shot strong
aromaDouble Shot strong+
aromaDouble Shot strong++
aromaDouble Shot
The longer the coffee is brewed,
the more bitter substances and
undesired aromas are released.
This has a negative effect on the
taste and makes the coffee less
easily digestible. So for extra strong
coffee, the appliance has a special
aromaDouble Shot function. When
half the quantity has been prepared,
it grinds and brews fresh coffee
beans so that only the pleasant,
aromatic scents are released.
Volume
The volume differs depending on
the type of drink and can be set in
ml steps.
The volume dispensed can fluctuate
depending on the quality of the milk.
If no controls are activated for
approx. 30 seconds, the appliance
will automatically exit the settings
mode. The settings made will be
automatically stored.
Preparation using
coffee beans
The appliance must be ready for use.
Place a cup underneath the beverage
outlet.
Use the rotary selector to select
“Ristretto”, “Espresso” or “Coffee”.
The display shows the selected drink along
with the preset values for the strength of the
coffee and the amount for this drink.
Coffee
The aromaDouble Shot function is
not available for ristretto, espresso
macchiato, and when ground coffee
is used.
Drink temperature
Values for coffee drinks:
normal
high
Values for hot water:
70° C White tea
80° C Green tea
90° C Black tea
Max Fruit tea
very high
Adjust
The settings can be changed
as described in the section
“Drink adjustment”.
Press to start dispensing.
The coffee is brewed and then dispensed
into the cup.
Press button again to stop
dispensing prematurely.
42
Page 13
en
Preparation using milk
This fully automatic coffee machine has
an integrated beverage outlet. This can be
used to prepare coffee drinks with milk or
also milk froth and warm milk.
Risk of burns!
The beverage outlet gets very hot.
After use, always let it cool down
before you touch it.
Milk container
The milk container has been designed
especially for use together with this fully
automatic coffee machine. It is intended
solely for use in the household and for
storing milk in the refrigerator. The insulated
container keeps milk cool for a number of
hours.
Important
before opening the door in case they
fall.
Connecting the milk container or a milk
carton:
Open the appliance door.
towards the front.
connecting elements as illustrated.
Attach the suction pipe and insert into the
milk container or a milk carton.
Close the appliance door.
For optimal milk froth quality, use
cold milk with a fat content of at least
1.5 % if possible.
Dried milk residues are difficult to
remove, therefore always clean
(see the section “Cleaning the
milk system”).
Coffee drinks with milk
Place a cup or glass underneath the
beverage outlet.
Select “Espresso Macchiato”,
“ Cappuccino”, “Latte Macchiato” or
“Caffe Latte” with the rotary selector.
The display shows the selected drink along
with the preset values for the strength of the
coffee and the amount for this drink.
The settings can be changed
as described in the section
“Drink adjustment”.
to the beverage outlet.
Press to start dispensing.
The milk is dispensed into the cup or glass
into the cup or glass.
Press button again to stop the
current step of the process prematurely.
43
Page 14
en
Milk froth or warm milk
Place a cup or glass underneath the
beverage outlet.
Select “Milk froth” or “Warm milk” with
the rotary selector.
The settings can be changed
as described in the section
“Drink adjustment”.
Press to start dispensing.
Milk froth or warm milk is dispensed from
the beverage outlet.
Press button again to stop the
current step of the process prematurely.
Preparation using
ground coffee
If coffee is not dispensed within
90 seconds, the brewing chamber
empties automatically to avoid an
overflow. The appliance is then
rinsed.
Place a cup underneath the beverage
outlet.
Using the rotary selector, select a coffee
drink or a coffee drink with milk.
The display shows the selected drink along
with the preset values for this drink.
The settings can be changed
as described in the section
“Drink adjustment”.
For coffee drinks with milk, please
observe the instructions in the
section “Preparation using milk”.
When using ground coffee, the
setting for the strength of the coffee
and dispensing two cups at once is
not available.
Important
before opening the door in case they
fall.
The appliance must be ready for use.
Open the appliance door.
The
removable drawer must be dry.
Put in coffee powder (maximum 2 level
Caution!
Do not use whole beans or instant
coffee.
Close the appliance door, will appear
on the display.
Press to start dispensing.
The coffee is brewed and then dispensed
into the cup. When selecting coffee drinks
then the coffee brewed.
For another drink with ground coffee,
repeat the procedure.
Dispensing hot water
Risk of burns!
The beverage outlet gets very hot.
After use, always let it cool down
before you touch it.
The appliance must be ready for use.
container.
the outlet.
Place a cup or glass underneath the
beverage outlet.
Select “Hot water” with the rotary
selector.
44
Page 15
en
The settings can be changed
as described in the section
“Drink adjustment”.
Press to start dispensing.
The message appears “Milk tube
removed from milk container?”.
If still connected, remove the milk tube
and touch [ Yes ] on the display.
Press button again to stop the
procedure prematurely.
Personalised drinks
Press to open the selection for
personalised drinks.
Up to 8 storage spaces can be used. Save
your favourite drinks that are frequently
dispensed here with all their settings.
The menu for adjusting the drinks opens.
The last drink dispensed is shown with the
last settings selected.
If you do not wish to save last drink
dispensed, select another drink with the
rotary selector.
Touch each setting to be changed and
adjust the values as desired with the
rotary selector.
Other setting options appear depending on
the selection.
Touch [ Continue ] to make other settings.
For milk drinks, the mixing ratio of
coffee and milk can be set.
The settings can be stored under an
individual name. Touch [ Save name ].
The mask for entering the name opens.
3 4 5 6 7 8 9 ´ _ < A B C D E F G H I J K
A _ _ _ _ _ _ _ _ _
Press to exit the menu
without saving at any time.
Entering or changing drinks
Press .
The selection of memory locations appears.
myCoffee 1
Create beverage
Using the rotary selector, choose an
empty memory location (empty cup)
to make a new entry, or an occupied
memory location to change or delete a
favourite drink.
At an empty memory location
[ Create beverage ] or an occupied
memory location [ Change beverage ].
If [ Delete beverage ] is selected, the
settings for the memory location are
deleted and it is again empty.
SaveCancel
Using the rotary selector, select a letter or
a symbol in the upper row.
Touch
to delete it.
Select other letters or symbols and
Touch [ Cancel ] to exit the entry without
menu.
With [ Save ] the entry is adopted. The
selection menu opens.
Press to exit the menu.
Select a personalised drink and
dispense
Press .
The selection of memory locations opens.
Use the rotary selector to select the
desired memory location.
Place a cup or glass underneath the
beverage outlet.
Press to start dispensing.
45
Page 16
en
Two cups at once
Press to prepare two cups of the
selected drink simultaneously. The setting is
shown by a second cup symbol and as text,
e.g. “2 x Espresso”.
Use the rotary selector to select the
desired drink.
Press .
Place two cups left and right underneath
the beverage outlet.
Press to start dispensing.
The selected drink is prepared and then
dispensed into both cups.
The drink is prepared in two stages
(two grinding operations).
Please wait until the process is
completely finished.
Two cups at once cannot be
dispensed for the settings
“aromaDouble Shot” or “ground
coffee”.
Adjusting the
grind setting
For dark roast coffee beans, choose
a finer grind, for lighter beans a
coarser grind.
Tip: Only make small changes to the
grinding degree setting.
The new setting will not become
apparent until after the second cup
of coffee.
If the display shows the message
“Select a coarser degree of
grinding”, this means that the
beans are being ground too finely.
Adjust the grinding level to a coarser
setting.
Childproof lock
The appliance can be locked to protect
children against scalding and burns.
Press and hold the button for
at least 4 seconds. “Childproof lock
activated”
No further operation is now possible; only
can be pressed.
This fully automatic coffee machine has an
adjustable grinding unit. This enables the
grinding level of the coffee to be individually
changed.
Open the appliance door.
Slide the regulator to select the grinding
coffee and coarsely ground coffee .
Close the appliance door again.
To deactivate the child lock, press and
hold the button for at least
4 seconds. “Childproof lock deactivated”
46
Page 17
en
1/12
Menu
The menu is used for changing individual
settings, accessing information and
launching processes.
Press to open the menu.
The different setting options will appear.
Navigating through the menu:
Press and to select the various
setting options, e.g. “Language”.
Turn the selector to set, e.g. “English”.
Settings
Language
English
The following settings can be made:
Language
Set the desired language to show the
display texts.
Water hardness
Set this to the local water hardness.
Level “1 (soft)” to “4 (very hard)” can be
selected. The preset water hardness is
“4 (very hard)”. The water hardness can,
for example, be requested from your local
water supplier.
It is important to set the water hardness correctly to enable the appli-
ance to accurately indicate when the
descaling programme should be run.
For example:
Set the appliance at 15 minutes to switch
off automatically:
Press button. The menu opens.
Touch repeatedly until the display
shows“Switch off after”.
Turn the rotary selector and select
“0h 15min”.
Press button. “Save changes? ”
appears.
Touch [ Save ]. The setting is saved.
The drink selection appears on the display.
Press to exit the menu at
any time. If no entry is made within
approx. 30 seconds, the menu
closes automatically and the settings
are not saved.
Water filter
removed, the setting “Insert”, “Replace” or
“Remove” must be made in the menu.
A water filter lessens limescale
deposits, reduces impurities in water
and improves the coffee taste.
outlets or from customer services
(see the section “Accessories”).
can be used.
Select either “Insert” or “Replace” with
the rotary selector.
opening of the water tank.
47
Page 18
en
Fill the water tank with water up to the
“max” mark.
container and close the door.
Caution: Do not jam the tube when
closing the door.
Place a container with a capacity of
0.5 litre under the outlet .
Press button .
rinse it.
Then empty the container.
The appliance is ready for use again.
activates the setting for the change
filter display.
Switch off after
To set how long the appliance should wait
after the last drink was prepared before it
automatically rinses and switches itself off.
You can specify values from 15 minutes to
8 hours. The factory setting is 30 minutes.
Illumination
Setting the illumination of the beverage
outlet. “On”, “When in use” or “Off” can be
selected.
Brightness illumination
Setting the illumination lightness of the
beverage outlet. “Level 1” to “Level 10” can
be selected.
Brightness display
Setting the illumination lightness of display.
“Replace water filter – Press ”
display appears, or at the latest after two
months. It needs to be replaced for reasons
of hygiene and to prevent a build-up
of limescale (which could damage the
appliance).
the setting “Remove” and press button
.
The message “Remove filter, reinsert
water tank, close door” appears.
If the appliance has not been used
for a prolonged period (for example,
while you are on holiday), the
existing filter should be rinsed before
the first time the appliance is used
again. To do this, simply dispense a
cup of hot water.
Key tones
Switch the signal tones on or off.
Clock display
Display option for time and date “Off” or
“Digital” (on). The settings for this can be
changed in the next menu options.
If the appliance is switched off at the
mains or there is a power failure, the
settings for the time and date will be
lost.
Clock
Setting for the current time.
Date-day
Setting for the current day.
Date-month
Setting for the current month.
Date-year
Setting for the current year.
can be found in the manual supplied with
48
Page 19
en
Transport protection
Service programme to prevent frost damage
during transportation and storage.
This programme completely empties the
appliance.
Touch [ Start ] to begin running the
programme.
Empty the water tank and reinsert.
If available remove the milk container and
close the door.
The appliance automatically empties all its
pipes.
Empty the drip tray and re-insert.
Beverage info
Display shows how many drinks have been
prepared since its initial use.
Touch [ Display ] to show the information.
Care and daily cleaning
Risk of electric shock!
Never immerse the appliance in
water. Do not steam-clean the
appliance.
Wipe the outside of the appliance with a
soft, damp cloth.
cloth.
Do not use any cleaning agents
containing alcohol or spirits.
Do not use abrasive cloths or cleaning
agents.
Factory settings
when delivered.
Select “Reset” with the rotary selector.
The message “Are you sure?” appears.
Touch [ Reset ] or [ Cancel ] to either
Always remove any limescale, residues
of coffee or milk, cleaning or descaling
solution immediately. It is possible for
corrosion to form underneath such
deposits.
New sponge cloths may contain
salts. Salts can cause rust film on
stainless steel and must therefore be
washed out thoroughly before use.
Open the door, pull the drip tray forward
and remove the coffee grounds container.
Empty, clean and dry them both.
Important: The drip tray and the
coffee grounds container should be
emptied and cleaned every day to
prevent the formation of mould.
49
Page 20
en
under running water and dry well.
Wipe and dry the inside of the appliance
(support, drip tray and the ground coffee
drawer) and collecting tray.
coffee drawer.
Do not put the following parts in
the dishwasher:
Accessory drawer, water tank, lid of the
water tank, beverage outlet cover, bean
container, lid of the bean container, metal
connecting element, ground coffee drawer,
protective cover of the brewing unit and the
milk container.
The following parts may be cleaned in
the dishwasher:
Drip tray, collecting tray, drip shelf, coffee
grounds container, milk tubes, individual
parts of the beverage outlet, measuring
spoon and individual parts of the milk
container lid.
Cleaning the milk system
The milk system is automatically cleaned
with a short jet of steam directly after
preparing a milk drink.
Tip: For particularly thorough
cleaning, the milk system can
be additionally rinsed with water
system”).
Important: Clean the milk system
manually every week and, if
required, also more often (see the
section “Cleaning the milk system
manually”).
Risk of burns!
The beverage outlet gets very hot.
After use, always let it cool down
before you touch it.
Rinsing the milk system
Press button and select
“Rinse milk system” with the rotary
selector.
Press to start the
programme.
Open the door and remove the milk tube
from the milk container.
Fix the connecting element on the right of
the beverage outlet with the magnet.
50
If the appliance is cold when
switched on, or if it is switched off
after dispensing coffee, it rinses
automatically. The system is therefore self-cleaning.
Important: If the appliance is not
used for a lengthy period (e.g.
while you are on holiday), clean
the entire appliance thoroughly,
including the milk system, the ground
coffee drawer and the brewing unit
before use.
Close the door. Be careful not to jam the
milk tube.
Place an empty glass under the beverage
outlet and put the end of the milk tube
into it.
Press button .
The milk system is rinsed with water.
Page 21
en
Then empty the glass and wipe the
milk tube.
Press to exit the program.
Cleaning the milk system manually
Take the milk system apart to clean it:
Push the beverage outlet down
completely and pull the cover forward to
remove.
Press the snap lever to the left of the
beverage outlet downwards and pull the
beverage outlet forward.
Separate the milk tubes, connecting
element and suction pipe.
Clean the individual parts with a deter-
gent solution and a soft cloth.
them.
Dismantle the
top and bottom sections of the beverage
outlet.
All parts of the milk system can also
be put in the dishwasher.
Put the individual parts back together
again.
Attach the beverage outlet directly from
51
Page 22
en
Cleaning the milk container
For reasons of hygiene, the milk container
should be cleaned regularly. Only the
individual parts of the lid are suitable for
being cleaned in the dishwasher. Clean the
stainless steel milk container by hand with a
mild detergent.
clean thoroughly under running water.
Clean the strainer of the brewing unit
thoroughly under the water jet.
Cleaning the brewing unit
(see also the Quick reference guide)
In addition to the automatic cleaning
programme, the brewing unit should be
removed regularly for cleaning.
Open the appliance door.
Use the mains switch to switch off
the appliance completely.
brewing unit.
Slide the red latch on the brewing unit all
the way to the left .
Press the eject lever right down. The
brewing unit will be released.
Take hold of the brewing unit by the
recessed grips and carefully remove it.
Important: Clean it without using
washing-up liquid and do not put it in
the dishwasher.
Clean the inside of the appliance thor-
oughly with a moist cloth, removing any
coffee residues.
Leave the brewing unit and the inside of
the appliance to dry.
and then push the brewing unit back into
the appliance until it clicks into place.
52
Important: The red latch must be
right over at the left at before
replacing (see diagram E).
Page 23
en
Press the eject lever right up and push
the red latch right over to the right to .
Insert the coffee grounds container.
Close the appliance door.
Service programmes
(see also the Quick reference guide)
The following messages will appear on the
display at certain intervals, either
“Descaling programme required!”
or
“Cleaning programme required!”
or
“calc’nClean programme required!”.
The unit should immediately be cleaned or
descaled using the appropriate programme.
Alternatively, the two processes Descale
and Clean can be carried out together using
the calc’nClean function (see the section
“calc’nClean”). Failure to carry out the
service programme according to the instructions may damage the appliance.
To display how many beverages can still
be prepared before one of the service
programmes needs to be run, proceed as
follows:
Press button
Turn the rotary selector to select
“Service info”.
Touch [ Display ] to call up the
information.
Caution!
For each of the service programmes,
use descaling and cleaning agents as
described in the instructions.
Never interrupt a service programme.
Do not drink liquids!
Never use vinegar, citric acid or any
vinegar-based or citric acid-based
agents.
Never place descaling tablets or
other descaling materials in the
ground coffee drawer!
Important:
Before starting each service program
(Descale, Clean or calc’nClean)
remove the brewing unit, clean as
instructed and replace it.
Be careful not to jam the milk tube
when closing the door.
After completion of each service
programme, wipe the appliance
immediately with a soft, damp cloth
to remove any residues from the
descaling and cleaning solution. It is
possible for corrosion to form underneath such deposits.
New sponge cloths may contain
salts. Salts can cause rust film on
stainless steel and must therefore be
washed out thoroughly before use.
Clean the beverage outlet, milk tubes
and connecting piece thoroughly.
Specially developed, suitable
descaling and cleaning tablets are
available from retail outlets or from
customer services (see the section
“Accessories”).
53
Page 24
en
Descaling
Takes about 21 minutes.
Press button .
Turn the rotary selector to select
“Descale”.
Press button . Display indi-
cates progress of the programme.
Empty drip trays and replace.
press .
Pour lukewarm water into the empty
water tank up to the “0.5 l” mark and
then dissolve one Siemens descaling
tablet TZ80002 in it. For the TZ60002 you
should always dissolve two tablets.
If there is not enough descaling
solution in the water tank, you will
be asked to do the following.
using uncarbonated water and press
again.
the right side of the beverage outlet with
the magnet.
Close the appliance door.
Place a container with a capacity of
0.5 litre under the beverage outlet.
Put the end of the milk tube into the
container.
Press button . The descaling
programme will now run for about
19 minutes.
.
Press button . The descaling
programme will now run for about
2 minutes and rinse the appliance.
trays, replace and close the appliance
door.
Press . The appliance has
again.
Press to exit the program.
Cleaning
Takes about 5 minutes.
Press button .
Turn the rotary selector to select “Clean”.
Press button . Display indi-
cates progress of the programme.
Clean the beverage outlet and replace,
empty the drip trays and replace.
Open the ground coffee drawer, drop in
a cleaning tablet and close the coffee
drawer again.
Close the appliance door.
Place a container with a capacity of
0.5 litre under the beverage outlet.
Press button . The cleaning
programme will now run for about
5 minutes.
trays, replace and close the appliance
door.
Press . The appliance has
again.
Press to exit the program.
Fill the tank with fresh water up to the
“max” indicator.
door.
Place the container underneath the
beverage outlet again.
Put the end of the milk tube into the
container.
54
Page 25
en
calc’nClean
Takes about 26 minutes.
calc’nClean combines the functions Descale
and Clean. If both programmes are due
to be carried out close together, the fully
automatic coffee machine will automatically
suggest this service programme.
Press button .
Turn the rotary selector to select
“calc’nClean”.
Press button . The display
indicates the progress of the programme.
Clean the beverage outlet and replace,
empty the drip trays and replace.
Open the ground coffee drawer, drop in
a cleaning tablet and close the coffee
drawer again.
and press
Pour lukewarm water into the empty
water tank up to the “0.5 l” mark and
then dissolve one Siemens descaling
tablet TZ80002 in it. For the TZ60002 you
should always dissolve two tablets.
If there is not enough descaling
solution in the water tank, you will
be asked to do the following.
using uncarbonated water and press
again.
the right side of the beverage outlet with
the magnet.
Close the appliance door.
Place a container with a capacity of
0.5 litre under the beverage outlet.
Put the end of the milk tube into the
container.
Press button .
The programme will now run for about
19 minutes.
.
Fill the tank with fresh water up to the
“max” indicator.
door.
Place the container underneath the
beverage outlet again.
Put the end of the milk tube into the
container.
Press button .
The programme will now run for about
7 minutes and rinse the appliance.
trays, replace and close the appliance
door.
Press . The appliance
is descaled, cleaned and ready for
use again.
Press to exit the program.
Special rinsing
Important: If any of the service
programmes is ever interrupted, for
instance by a power failure, please
proceed according to the information
on the display:
water up to the “max” mark.
Press button . The
programme will now run for about
2 minutes and rinse the appliance.
Empty the drip trays, replace and close
the appliance door. The appliance is
ready for use again.
Press to exit the program.
55
Page 26
en
Tips on energy saving
Press button to switch the
appliance to “energy saving mode”. The
appliances uses very little power when
in “energy saving mode”, but monitors all
safety-relevant functions so as to avoid
damage.
In the menu under “Switch off after”,
set the automatic switch off period to
15 minutes.
and the illumination in the menu to save
energy.
If possible, do not interrupt the dispensing
of coffee or milk froth. Stopping a process
prematurely results in higher energy
more quickly.
Descale the appliance regularly to avoid a
build-up of limescale. Limescale residues
cause higher energy consumption.
Storing accessories
The fully automatic coffee machine has a
special accessory drawer for storing the
Quick reference guide and the accessories
in the appliance.
Put the measuring spoon and the water
special support at the front of the accessory drawer.
The long suction pipe can be stored in the
holder on the inside of the door.
the magnetic holder above the ground
coffee drawer.
Accessories
The following accessories are available
from retailers or from customer service:
Frost protection
To prevent frost damage during transport and storage, completely empty the
appliance beforehand (see the section
“Menu – Transport protection”).
Accessories Order number
Customer service
Cleaning tablets TZ60001 / 00310575
Descaling tablets TZ80002 / 00576693
TZ70003 / 00575491
Care set TZ80004 / 00576330
Milk container with
“freshLock” lid
TZ80009N / 00576166
56
Page 27
en
Disposal
Dispose of packaging in an environmentally-friendly manner. This appliance is
labelled in accordance with European
Directive 2012/19/EG concerning used
electrical and electronic appliances
(waste electrical and electronic equipment –
WEEE). The guideline determines the
framework for the return and recycling of
used appliances as applicable throughout
the EU. Please ask your specialist retailer
about current disposal facilities.
Guarantee
The guarantee conditions for this appliance
country in which it is sold. Details regarding
these conditions can be obtained from
the dealer from whom the appliance was
purchased. The bill of sale or receipt must
be produced when making any claim under
the terms of this guarantee.
Changes reserved.
Power connection (voltage – frequency) 220-240 V – 50/60 Hz
Heater wattage 1600 W
Maximum static pump pressure 19 bar
2.4 l
Maximum capacity of the coffee bean container 500 g
Length of power cable 1.7 m
Dimensions (H x B x D) 455 x 495 x 375 mm
Weight, empty 19-20 kg
Type of grinding unit Ceramic
57
Page 28
en
Simple troubleshooting
Problem Cause Solution
Build-up of limescale in the
-
appliance.
ation in quantity or milk froth
spraying).
The suction pipe is blocked. Clean the suction pipe.
Drinks cannot be dispensed. Beverage outlet or one of the
3 connections are blocked.
The drink runs out at
the entire outlet during
dispensing.
Too little milk froth, none at
all, or the milk system is not
taking in any milk.
Lower part of the beverage
outlet is missing.
Build-up of limescale in the
appliance.
Beverage outlet or one of the
3 connections are blocked.
Milk not suitable for foaming. Do not use milk that has
Descale the appliance
according to the instructions,
see the section “Service
programmes”.
Clean the beverage outlet and
the connections.
Attach the lower part, see
the section “Cleaning the
milk system”.
Descale the appliance
according to the instructions,
see the section “Service
programmes”.
Clean the beverage outlet and
the connections.
already been boiled. Use cold
milk with a fat content of at
least 1.5%.
Beverage outlet or the milk
tubes are not correctly
assembled.
The suction pipe is blocked. Clean the suction pipe.
The personally selected
volume is not reached. Coffee
dispensing slows to a trickle
or stops completely.
Hot water milky or tastes of
coffee.
Coffee has no “crema”. Unsuitable type of coffee. Use a type of coffee with a
Heavy build-up of limescale in
the appliance.
Milk tube has not been
removed. the milk container.
Milk or coffee residue in the
beverage outlet.
The beans are no longer
fresh.
Moisten the individual parts
and put them together again.
Adjust the grinding level to a
coarser setting. Use a coarser
ground coffee.
Descale the appliance
according to the instructions,
see the section “Service
programmes”.
Clean the beverage outlet.
higher proportion of robusta
beans.
Use fresh beans.
58
The grinding level is not
suitable for the beans.
Adjust the grinding unit to a
Page 29
Problem Cause Solution
en
Coffee is too “acidic”. The grinding level is too
coarse. Preground coffee is
too coarse.
Unsuitable type of coffee. Change the type of coffee.
Coffee is too “bitter”. Adjust the grinding level to a
Unsuitable type of coffee. Change the type of coffee.
Coffee tastes burnt. The brewing temperature is
too high.
Unsuitable type of coffee. Change the type of coffee.
Coffee is too “weak”. Coffee strength selected is
too weak. coffee, see the section
Adjust the grinding unit to
ground coffee.
coarser setting. Use a coarser
ground coffee.
ture, see the section
“Drink adjustment”.
Adjust the grinding level to a
coarser setting. Use a coarser
ground coffee.
“Drink adjustment”.
Ground coffee jammed in the
coffee drawer. drawer, clean and dry
thoroughly.
Ground coffee sticks in the
coffee drawer.
in position in the water tank. correctly. straight down into the tank
Bean container sticks when
inserting.
The coffee grounds are not
compact and are too wet. or too coarse, or not enough
Grinding level adjustment is
stiff.
Ground coffee sticks together. Do not press the ground
drawer.
Coffee drawer is damp.
drawer, clean and dry
thoroughly.
connection.
There are beans in the
housing.
Adjust the grinding unit to a
ground coffee has been used.
Too many beans in the
grinding unit.
2 level measuring spoons of
ground coffee.
Dispensing a drink from
coffee beans. Only make any
subsequent changes to the
grinding level in small steps.
59
Page 30
en
Problem Cause Solution
Brewing unit cannot be
inserted.
Protective cover of the
brewing unit cannot be
properly attached.
Display shows
“12:00”
Display shows
“Milk container connected? ”
despite connected milk
container.
Brewing unit is in the wrong
position.
Brewing unit is locked. Unlock the brewing unit, see
Brewing unit is not locked. Lock the brewing unit, see the
Power failure or appliance
switched off at mains. the appliance off at the mains
Container is outside the range
of the sensor.
Material e.g. milk carton is not
recognised. with “Yes” or use the enclosed
Insert the brewing unit
according to the instructions,
see the section “Cleaning the
brewing unit”.
the section “Cleaning the
brewing unit”.
section “Cleaning the brewing
unit”.
or select the "Off" option in
the Clock display menu.
Position the container at the
right edge.
milk container.
Display shows, for example:
“Fault: E0510”
Display shows
“Fill bean container”
although the container is
already full, or the grinder is
not grinding any beans.
Display shows
“Clean brewing unit”
The appliance has a fault. Proceed according to the
display screen.
Beans are not falling into the
grinding unit (beans too oily).
Brewing unit is soiled. Clean the brewing unit.
Too much ground coffee in
the brewing unit.
The mechanism of the
brewing unit is stiff.
Gently tap the bean container.
Possibly change the type
of coffee. When the bean
container is empty, wipe it
with a dry cloth.
Clean the brewing unit. Do
not place more than two level
measuring spoons of ground
coffee in the drawer.
Clean the brewing unit, see
the section “Care and daily
cleaning”.
60
Page 31
Problem Cause Solution
en
Display shows
“Refill with still water or
remove filter ”
Display shows
“Empty drip trays”
despite them being empty.
Display screen reads
"Insert drip trays"
even though drip tray in use.
Water dripped onto the inner
the drip tray was removed.
Water tank wrongly inserted Insert water tank correctly
Carbonated water in the water
tank.
Float is stuck in the water
tank. thoroughly.
according to instructions, or according to the instructions
Drip tray is soiled and wet. Clean and dry the drip tray
Inside of appliance (tray
holder) dirty.
Drip tray was removed too
soon.
Fill the water tank with fresh
tap water.
and then switch on, or use a
until no more air bubbles
thoroughly.
Clean the inside.
Wait a few seconds after
the last drink was dispensed
before removing the drip tray.
Display shows
“Please press on/off”
If you are unable to solve the problem, always call the hotline!
Appliance is too warm. Leave the appliance to cool
down.
Dirty brewing unit. Clean the brewing unit.
61
Loading...