Le Guide de l’Utilisateur
Bedienungsanleitung
Guia del Usuario
Guida dell’Utente
Manual do Usuário
Руководство пользователя
日本語
사용자 가이드
繁體中文
用戶指南
Panduan Pengguna
Gebruikershandleiding
WARNING: Voltages in this
equipment are hazardous to life. No
user-serviceable parts inside. Refer
all servicing to qualified service
personnel. The safety certifications
do not apply when the operating
voltage is changed from the factory
setting.
This symbol indicates
that dangerous voltage
constituting a risk of
electric shock is present
within this unit.
This symbol indicates
that there are important
operating and maintenance
instructions in the literature
accompanying this unit.
IMPORTANT SAFETY
INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation
openings. Allow sufficient distances
for adequate ventilation and install in
accordance with the manufacturer’s
instructions.
8. DO NOT install near any heat sources
such as open flames, radiators, heat
registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not place any open flame sources
on the product.
9. DO NOT defeat the safety purpose of
the polarized or grounding type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wider blade or
the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. PROTECT the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
11. ONLY USE attachments/accessories
specified by the manufacturer.
12. USE only with a cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
13. UNPLUG this apparatus during
lightning storms or when unused for
long periods of time.
14. REFER all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in
any way, such as power supply cord
or plug is damaged, liquid has been
spilled or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
15. DO NOT expose the apparatus to
dripping and splashing. DO NOT put
objects filled with liquids, such as
vases, on the apparatus.
16. The MAINS plug or an appliance
coupler shall remain readily operable.
17. The airborne noise of the Apparatus
does not exceed 70dB (A).
18. Apparatus with CLASS I construction
shall be connected to a MAINS socket
outlet with a protective earthing
connection.
19. To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
20. Do not attempt to modify this product.
Doing so could result in personal injury
and/or product failure.
21. Operate this product within its specified
operating temperature range.
Quick Start Instructions
GROUP SCAN
sync
SCAN COMPLETE
OPEN FREQ:70
RX CHAN FOUND: 4
Deploy Completed
4 of 4
Channels Set
SYNC TX NOW
a
gainaudio
RF
RX1
A B
OL
OL
sync
b
ULXD4Q
Digital Wireless Receiver
b
ENTER
EXIT
SCAN
GROUP:01
gainaudio
control
RF
A B
OL
OL
push
ENTER
EXIT
SB900
45°
a
150 mA
line
mic
line
mic
A
line
line
line
mic
mic
mic
b
line
mic
power
line
line
mic
mic
c
line
line
line
line
mic
mic
mic
mic
a
+ +
+
+
AA
-
-
1-G: 01CH:03 TxOn
2-G: 01CH:06 TxOn
3-G: 01CH:08 TxOn
4-G: 01CH:12 TxOn
sync
Select RX TO SCAN
1 Receiver
2 Receiver
3 Receiver
CHANNEL SCAN
GROUP SCAN
b
a
gainaudio
control
RF
A B
OL
OL
ENTER
EXIT
SCAN
push
<15 cm (6 in.)
a
b
I
I
I
I
I
I
I
I
I
I
I
I
I
3
c
+
+
-
AA
-