SLX-D
SLX-D Digital Wireless
PRELIMINARY USER GUIDE
©2020 Shure Incorporated
00000000 (Preliminary Draft)
Printed in China
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Allow sufficient distances for adequate
ventilation and install in accordance with the manufacturer’s instructions.
8. DO NOT install near any heat sources such as open flames, radiators,
heat registers, stoves, or other apparatus (including amplifiers) that
produce heat. Do not place any open flame sources on the product.
9. DO NOT defeat the safety purpose of the polarized or grounding type plug.
A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wider blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or
when unused for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
15. DO NOT expose the apparatus to dripping and splashing. DO NOT
put objects filled with liquids, such as vases, on the apparatus.
16. The MAINS plug or an appliance coupler shall remain readily operable.
17. The airborne noise of the Apparatus does not exceed 70dB (A).
18. Apparatus with CLASS I construction shall be connected to a
MAINS socket outlet with a protective earthing connection.
19. To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
20. Do not attempt to modify this product. Doing so could
result in personal injury and/or product failure.
21. Operate this product within its specified operating temperature range.
This symbol indicates that dangerous voltage constituting a risk of
electric shock is present within this unit.
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
WARNING
• Battery packs may explode or release toxic materials. Risk of fire or burns.
Do not open, crush, modify, disassemble, heat above 140°F (60°C), or
incinerate.
• Follow instructions from manufacturer
• Only use Shure charger to recharge Shure rechargeable batteries
• WARNING: Danger of explosion if battery incorrectly replaced. Replace only
with same or equivalent type.
• Never put batteries in mouth. If swallowed, contact your physician or local
poison control center
• Do not short circuit; may cause burns or catch fire
• Do not charge or use battery packs other than Shure rechargeable batteries
• Dispose of battery packs properly. Check with local vendor for proper disposal
of used battery packs.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like
Important Product Information
LICENSING INFORMATION
Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements. Changes or
modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability depends on the user’s classification and application, and on the selected frequency. Shure strongly urges the
user to contact the appropriate telecommunications authority concerning proper
licensing, and before choosing and ordering frequencies.
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變
更頻率、加大功率或變更原設計之特性及功能。 第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，
應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作
業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射
性電機設備之干擾。
Australia Warning for Wireless
This device operates under an ACMA class licence and must comply with all the
conditions of that licence including operating frequencies. Before 31 December
2014, this device will comply if it is operated in the 520-820 MHz frequency band.
WARNING: After 31 December 2014, in order to comply, this device must not be
operated in the 694-820 MHz band.
Canada Warning for Wireless
This device operates on a no-protection, no-interference basis. Should the
user seek to obtain protection from other radio services operating in the same
TV bands, a radio licence is required. For further details, consult Innovation,
Science and Economic Development Canada’s document Client Procedures
Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Low-Power Radio
Apparatus in the TV Bands.
Ce dispositif fonctionne selon un régime de non-brouillage et de non-protection.
Si l’utilisateur devait chercher à obtenir une certaine protection contre d’autres
services radio fonctionnant dans les mêmes bandes de télévision, une licence radio serait requise. Pour en savoir plus, veuillez consulter la Circulaire des procédures concernant les clients CPC-2-1-28, Délivrance de licences sur une base
volontaire pour les appareils radio de faible puissance exempts de licence et exploités dans les bandes de télévision d’Innovation, Sciences et Développement
économique Canada.
เครื่องโทรคมนาคมและอุปกรณ์นี้มีความสอดคล้องตามมาตรฐานหรือข้อกำาหนดท
างเทคนิคของ กสทช.
System Components
All systems include:
①
Rack mounting hardware
②
¼-wave antennas (2)
③
Power supply
④
AA batteries (2)
⑤
SLXD4 or SLXD4D receiver
Guitar system includes:
⑥
¼" to mini 4-pin guitar cable
⑦
SLXD1 bodypack transmitter
Vocal system includes:
⑧
Microphone clip
⑨
SLXD2 handheld transmitter with microphone cartridge
(choice of SM58®, SM86, Beta 58A®, Beta 87A™, or
Beta 87C™)
Lavalier, Headworn, and Instrument systems include
bodypack transmitter (⑦) and one of the following:
⑩
WL93 miniature lavalier microphone
⑪
WL183/WL185/ML4 lavalier microphone
exit
IR
receiver 1
IR
exit
push ʠ
sync
receiver 2
push ʠ
sync
exit
push ʠ
sync
SLXD
⑫
SM35 headset microphone
⑬
Beta 98H/C™ instrument microphone
⑭
MX153 earset headworn microphone
Combo system includes:
⑨
Handheld transmitter with SM58 microphone head
⑪
WL185
Set Up the Receiver
antenna B
antenna A
inst / aux
antenna B antenna A
inst / aux
inst / aux
15V 0.6A
power
12V OUT
150 mA
12V OUT
150 mA
15V 0.6A
line
mic
ULXD4
www.shure.com
power mic / line inst / auxantenna . B antenna . A
150 mA
inst / aux
1. Attach the included antennas to the back of the receiver.
2. Connect the power supply to the receiver and plug
the cord into an AC power source.
45°
3. Connect the audio output to an amplifier or mixer.
4. Press the power button on the receiver. Use the menu to set the system
to microphone (mic) or instrument (line) level as appropriate.
exit
IR
push ʠ
sync
Install Transmitter Batteries
Bodypack:
1. Push the tab up and open the battery door to access the battery compartment
2. Place a Shure SB903 Li-ion rechargeable battery
or 2 AA batteries in the compartment
3. Close the battery door
Handheld:
1. Turn the battery cover clockwise to access the battery compartment
2. Lift the battery door to open the battery compartment
3. Place a Shure SB903 Li-ion rechargeable battery
or 2 AA batteries in the compartment
4. Replace the battery cover and turn it counterclockwise to secure it
1
What are Groups and Channels?
push ʠ
To minimize interference, Shure wireless systems organize the RF band into predefined groups and channels. A group is a set of compatible frequencies within a frequency
band. A single frequency within a group is a channel. Tune a receiver and transmitter to the best available channel within its group to set up your system.
To ensure compatibility, all receivers in the same band should be set to the same group. You can configure this manually, or use the Guided Frequency Setup to walk you
through the process of finding an optimal configuration.
For best results, use a network switch when connecting 3 or more receivers.
Important! To avoid interference, before you begin:
Turn off all transmitters for the systems you are setting up. This prevents them from interfering with the frequency scan.
Turn on the following devices so they are operating as they would be during the presentation or performance. This will allow the scan to detect and avoid any interference
from these devices:
• Configured wireless systems or devices
• Computers
• Large LED panels
• Effects processors
• CD players
Using the Guided Frequency Setup
Set up a new system:
1. Push the control knob and select 1. Frequency Setup
> 1.1 Guided Frequency Setup.
2. Select Initialize My System and push the control knob to continue.
3. Turn off all transmitters you plan to use with your system.
4. Select start scan.
5. After the scan is done, push the control knob to
assign frequencies to the receiver.
6. Turn on the transmitter you plan to use with this receiver.
SLXD
7. Align the infrared (IR) ports on the transmitter and
receiver, and push the sync button.
Add a new receiver to your system:
1. Push the control knob and select Frequency Setup > Guided Frequency Setup.
2. Select Add Receiver to My System.
3. To change the group, rotate the control knob to select G:, push to
select, rotate to change the number, push again to confirm.
4. Select start scan.
5. After the scan completes, push the control knob to apply the receiver channel.
6. Turn on the transmitter you plan to use with this receiver.
7. Align the infrared (IR) port on the transmitter with that
on the receiver, and push the sync button.
8. Once the sync is complete, the system is ready for use.
Manual Frequency Selection
To manually adjust group, channel or frequency:
1. Select 1. Frequency Setup > 1.4 Manual Frequency Setup
from the receiver menu.
2. Use the control knob to select and adjust the group
(G), channel (C), or frequency (MHz).
3. Select apply and push the control knob to save.
Sound Check and Gain Adjustment
Navigate to the receiver's Gain screen to test the transmitter at performance levels.
Adjust the gain to keep the audio indicator within the horizontal bracket above the
bar. Reduce the gain if there is audible distortion of the audio.
IR
IR Port
8. Once the sync is complete, the system is ready for use.
exit
sync
GAIN
12
dB
AUDIO
2
Frequencies for European Countries
G51 470-534 MHz
Country Code
Code de Pays
Codice di paese
Código de país
Länder-Kürzel
A, B, BG, CH, CY, CZ, D, DK, EST, F *
FIN, GB, GR, H, HR, I, IRL, IS, L, LT *
M, N, NL, P, PL, RO, S, SK, SLO, TR *
All other countries *
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
H51 534-598 MHz
Country Code
Code de Pays
Codice di paese
Código de país
Länder-Kürzel
A, B, BG, CH, CY, CZ, D, EST 534 - 598 MHz*
F, GB, GR, H, I, IS, L, LT 534 - 598 MHz*
NL, P, PL, S, SK, SLO 534 - 598 MHz*
DK, FIN, M, N *
HR, E, IRL, LV, RO, TR *
All other countries *
Frequency Range
Gamme de frequences
Gamme di frequenza
Gama de frequencias
Frequenzbereich
Frequency Range
Gamme de frequences
Gamme di frequenza
Gama de frequencias
Frequenzbereich
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
K51 606-670 MHz
Country Code
Code de Pays
Codice di paese
Código de país
Länder-Kürzel
A, B, BG, CH, CY, CZ, D, EST 606 - 670 MHz*
F, GB, GR, H, I, IS, L, LT 606 - 670 MHz*
NL, P, PL, S, SK, SLO 606 - 670 MHz*
RO 646 - 647; 654 - 655; 662 - 663 MHz*
DK, E, FIN, HR, IRL, LV, M, N, TR *
All other countries *
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
L52 632-694 MHz
Country Code
Code de Pays
Codice di paese
Código de país
Länder-Kürzel
A, B, BG, CH, CY, CZ, D, DK, EST, F *
FIN, GB, GR, H, HR, I, IRL, IS, L, LT *
M, N, NL, P, PL, RO, S, SK, SLO, TR *
All other countries *
Frequency Range
Gamme de frequences
Gamme di frequenza
Gama de frequencias
Frequenzbereich
Frequency Range
Gamme de frequences
Gamme di frequenza
Gama de frequencias
Frequenzbereich
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
P51 710-782 MHz
Country Code
Code de Pays
Codice di paese
Código de país
Länder-Kürzel
Frequency Range
Gamme de frequences
Gamme di frequenza
Gama de frequencias
Frequenzbereich
A, B, BG, CH, CY, CZ, D, EST, F, GB 710 - 782 MHz*
GR, H, I, IS, L, LT, NL, P, PL, S, SK, SLO 710 - 782 MHz*
RO 718 - 719; 726 - 727; 734 - 743; 750 - 751; 758 - 759
MHz*
DK, E, FIN, HR, IRL, LV, M, N, TR *
All other countries *
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
Q51 794-806 MHz
Country Code
Code de Pays
Codice di paese
Código de país
Länder-Kürzel
Frequency Range
Gamme de frequences
Gamme di frequenza
Gama de frequencias
Frequenzbereich
A, B, BG, CH, CY, CZ, D, DK, E, EST *
F, FIN, GB, GR, H, HR, I, IRL, IS, L, LT *
LV, M, N, NL, P, PL, S, SK, SLO, TR *
All other countries *
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
R51 800-810 MHz
Country Code
Code de Pays
Codice di paese
Código de país
Länder-Kürzel
Frequency Range
Gamme de frequences
Gamme di frequenza
Gama de frequencias
Frequenzbereich
N 800 - 810 MHz*
A, B, BG, CH, CY, CZ, D, DK, E, EST *
F, FIN, GB, GR, H, HR, I, IRL, IS, L, LT *
LV, M, N, NL, P, PL, S, SK, SLO, TR *
All other countries *
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
S50 823-832 MHz, 863-865 MHz
Country Code
Code de Pays
Codice di paese
Código de país
Länder-Kürzel
Frequency Range
Gamme de frequences
Gamme di frequenza
Gama de frequencias
Frequenzbereich
D license free
A, B, BG, CH, CY, CZ, D, DK, EST, F *
FIN, GB, GR, H, HR, I, IRL, IS, L, LT *
M, N, NL, P, PL, RO, S, SK, SLO, TR *
863 - 865 MHz EU: license free
All other countries *
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
V51 174-216 MHz
Country Code
Code de Pays
Codice di paese
Código de país
Länder-Kürzel
Frequency Range
Gamme de frequences
Gamme di frequenza
Gama de frequencias
Frequenzbereich
A, B, BG, CH, CY, CZ, D, DK, E, EST *
F, FIN, GB, GR, H, HR, I, IRL, IS, L, LT *
SLXD1
Dipole Antenna Antenna Gain Frequency
Bands G58 G59 G60 G61 2.8 510MHz
Bands G62 H55 H56 H57 J52 J53 J54 2.7 530MHz
Bands K59 L55 L56 L57 L58 L59 2.6 630MHz
Bands M55 P53 Q51 JB 2.1 750MHz
Bands S50 X51 2.7 930MHz
SLXD2
Dipole Antenna Antenna Gain Frequency
Bands G58 G59 G60 G61 2.2 510MHz
Bands G62 H55 H56 H57 1.2 530MHz
Bands J52 J53 J54 0.1 570MHz
Bands K59 L55 L56 L57 L58 L59 -0.8 690MHz
Bands M55 P53 Q51 JB 0.4 710MHz
Bands S50 X51 -0.9 930MHz
Country Code
Code de Pays
Codice di paese
Código de país
Länder-Kürzel
LV, M, N, NL, P, PL, S, SK, SLO, TR *
All other countries *
* This equipment may be capable of operating on some frequencies not authorized in
your region. See Licensing Information.
Z17 1492-1525 MHz
Country Code
Code de Pays
Codice di paese
Código de país
Länder-Kürzel
A, B, BG, CH, CY, CZ, D, DK, E, EST *
F, FIN, GB, GR, H, HR, I, IRL, IS,
L, LT
LV, M, N, NL, P, PL, S, SK, SLO, TR *
This Wireless microphone operates
on the range of 1492-1525 MHz.
Should be used INDOORS ONLY.
*
* This equipment may be capable of operating on some frequencies not authorized in
your region. See Licensing Information.
Z18 1785-1805 MHz
Country Code
Code de Pays
Codice di paese
Código de país
Länder-Kürzel
A, B, BG, CH, CY, CZ, D, DK, E, EST *
F, FIN, GB, GR, H, HR, I, IRL, IS, L, LT *
LV, M , N, NL, P, PL, S, SK, SLO, TR *
All other countries *
* This equipment may be capable of operating on some frequencies not authorized in
your region. See Licensing Information.
Frequency Range
Gamme de frequences
Gamme di frequenza
Gama de frequencias
Frequenzbereich
Frequency Range
Gamme de frequences
Gamme di frequenza
Gama de frequencias
Frequenzbereich
*
All other countries
Frequency Range
Gamme de frequences
Gamme di frequenza
Gama de frequencias
Frequenzbereich
Hereby, Shure Incorporated declares that the radio equipment is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at
the following internet address: http://www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: EMEAsupport@shure.de
Information to the user
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device operates on frequencies shared with other devices. Consult the Federal
Communications Commission White Space Database Administration website to determine available channels in your area prior to operation.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
Certifications
Certified under FCC Part 15 and FCC Part 74.
Certified by ISED in Canada under RSS-102 and RSS-210.
CAN ICES-3 (B)/NMB-3 (B)
Approved under the Declaration of Conformity (DoC) provision of FCC Part 15.
These transmitters have been tested and found to comply with international radiation
exposure limits set forth for an uncontrolled environment. This equipment is in direct
contact with the body of the user under normal operating conditions. These transmitters must not be co-located or operating in conjunction with any other antenna or
transmitter.
FCC ID: DD4SLXD1G58, DD4SLXD1H55, DD4SLXD1J52, DD4SLXD2G58,
DD4SLXD2H55, DD4SLXD2J52. IC: 616A-SLXD1G58, 616A-SLXD1H55,
616A-SLXD1J52, 616A-SLXD2G58, 616A-SLXD1H55, 616A-SLXD1J52 .
Meets essential requirements of the following European Directives:
• WEEE Directive 2012/19/EU, as amended by 2008/34/EC
• RoHS Directive EU 2015/863
Note: Please follow your regional recycling scheme for batteries and electronic
waste
This product meets the Essential Requirements of all relevant European directives
and is eligible for CE marking.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Europe, Middle East, Africa:
UK Importer
PT. GOSHEN SWARA INDONESIA
Kompleks Harco Mangga Dua Blok L No. 35 Jakarta Pusat
I.16.GSI31.00501.0211
Loading...